| snmpNotifyName |
.1.3.6.1.6.3.13.1.1.1.1 |
|
The locally arbitrary, but unique identifier associated
with this snmpNotifyEntry.
|
| snmpNotifyTag |
.1.3.6.1.6.3.13.1.1.1.2 |
|
This object contains a single tag value which is used
to select entries in the snmpTargetAddrTable. Any entry
in the snmpTargetAddrTable which contains a tag value
which is equal to the value of an instance of this
object is selected. If this object contains a value
of zero length, no entries are selected.
|
| snmpNotifyType |
.1.3.6.1.6.3.13.1.1.1.3 |
|
This object determines the type of notification to
be generated for entries in the snmpTargetAddrTable
selected by the corresponding instance of
snmpNotifyTag. This value is only used when
generating notifications, and is ignored when
using the snmpTargetAddrTable for other purposes.
If the value of this object is trap(1), then any
messages generated for selected rows will contain
Unconfirmed-Class PDUs.
If the value of this object is inform(2), then any
messages generated for selected rows will contain
Confirmed-Class PDUs.
Note that if an SNMP entity only supports
generation of Unconfirmed-Class PDUs (and not
Confirmed-Class PDUs), then this object may be
read-only.
|
| snmpNotifyStorageType |
.1.3.6.1.6.3.13.1.1.1.4 |
|
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
|
| snmpNotifyRowStatus |
.1.3.6.1.6.3.13.1.1.1.5 |
|
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
|
| snmpNotifyFilterProfileName |
.1.3.6.1.6.3.13.1.2.1.1 |
|
The name of the filter profile to be used when generating
notifications using the corresponding entry in the
snmpTargetAddrTable.
|
| snmpNotifyFilterProfileStorType |
.1.3.6.1.6.3.13.1.2.1.2 |
|
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
|
| snmpNotifyFilterProfileRowStatus |
.1.3.6.1.6.3.13.1.2.1.3 |
|
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the
snmpNotifyFilterProfileRowStatus column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding instance of
snmpNotifyFilterProfileName has been set.
|
| snmpNotifyFilterSubtree |
.1.3.6.1.6.3.13.1.3.1.1 |
|
The MIB subtree which, when combined with the corresponding
instance of snmpNotifyFilterMask, defines a family of
subtrees which are included in or excluded from the
filter profile.
|
| snmpNotifyFilterMask |
.1.3.6.1.6.3.13.1.3.1.2 |
|
The bit mask which, in combination with the corresponding
instance of snmpNotifyFilterSubtree, defines a family of
subtrees which are included in or excluded from the
filter profile.
Each bit of this bit mask corresponds to a
sub-identifier of snmpNotifyFilterSubtree, with the
most significant bit of the i-th octet of this octet
string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier, and
the least significant bit of the i-th octet of this
octet string corresponding to the (8*i)-th
sub-identifier, where i is in the range 1 through 16.
Each bit of this bit mask specifies whether or not
the corresponding sub-identifiers must match when
determining if an OBJECT IDENTIFIER matches this
family of filter subtrees; a '1' indicates that an
exact match must occur; a '0' indicates 'wild card',
i.e., any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object instance
is contained in a family of filter subtrees if, for
each sub-identifier of the value of
snmpNotifyFilterSubtree, either:
the i-th bit of snmpNotifyFilterMask is 0, or
the i-th sub-identifier of X is equal to the i-th
sub-identifier of the value of
snmpNotifyFilterSubtree.
If the value of this bit mask is M bits long and
there are more than M sub-identifiers in the
corresponding instance of snmpNotifyFilterSubtree,
then the bit mask is extended with 1's to be the
required length.
Note that when the value of this object is the
zero-length string, this extension rule results in
a mask of all-1's being used (i.e., no 'wild card'),
and the family of filter subtrees is the one
subtree uniquely identified by the corresponding
instance of snmpNotifyFilterSubtree.
|
| snmpNotifyFilterType |
.1.3.6.1.6.3.13.1.3.1.3 |
|
This object indicates whether the family of filter subtrees
defined by this entry are included in or excluded from a
filter. A more detailed discussion of the use of this
object can be found in section 6. of [SNMP-APPL].
|
| snmpNotifyFilterStorageType |
.1.3.6.1.6.3.13.1.3.1.4 |
|
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
|
| snmpNotifyFilterRowStatus |
.1.3.6.1.6.3.13.1.3.1.5 |
|
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
|
