BASIS-RAS-DISK-MIB device MIB details by Stratacom

BASIS-RAS-DISK-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing BASIS-RAS-DISK-MIB.

Vendor:	Stratacom
Mib:	BASIS-RAS-DISK-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- BASIS-RAS-DISK-MIB
--
-- June 2002
--
-- Copyright (c) 1996-1998, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

-- 
-- LAST-UPDATED "200206030000Z"
-- DESCRIPTION "This MIB contains information on the
--              Disk Related Objects for MGX8220."
--
-- REVISION "200206030000Z"
-- DESCRIPTION
-- 	"Added Cisco Copyrights to the MIB."
--

 BASIS-RAS-DISK-MIB DEFINITIONS ::= BEGIN 

IMPORTS
    OBJECT-TYPE                      FROM   RFC-1212
    DisplayString                    FROM   RFC1213-MIB
    axisDiagnostics                  FROM   BASIS-MIB;

rasDsk                      OBJECT IDENTIFIER ::= { axisDiagnostics 2 }

-- ----------------------------------------------------------------------
--
-- Group "axisDiagnostics"
-- This group contains information pertained to RAS Disk diagnostics in
-- AXIS.
--
-- ----------------------------------------------------------------------

rasDskStatus    OBJECT-TYPE
        SYNTAX  INTEGER {
                        enable  (1),
                        disable (2)
                        }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether the RAS Disk diagnostics has been
		 Enabled or not.
                "
        DEFVAL  { disable }

        ::= { rasDsk 1 }


dskHealth       OBJECT-TYPE
        SYNTAX  INTEGER {
                        pass    (1),
                        fail    (2),
                        unknown (3),
                        testInProgress (4)
                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Shows the Status of the Hard Disk, which depends on the
                 number of corrupted files and number of Bad sectors in
		 the ASC. The Status is PASS if there are no Corrupted
		 files in the Disk AND the number of Bad Sectors is within
		 the threshold value. If the Disk has one or more
		 Corrupted files OR if the Number of Bad Sectors exceeds
		 the threshold value, the Status is FAIL. If Diagnostics
		 is going on, the Status is TestInProgress. Status will be
		 UNKNOWN until the diagnostics starts for the first time.
                "
        DEFVAL  { unknown }

        ::= { rasDsk 2 }


standbyDskHealth        OBJECT-TYPE
        SYNTAX  INTEGER {
                        pass    (1),
                        fail    (2),
                        unknown (3),
                        testInProgress (4)
                        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Shows the Status of the Standby ASC Hard Disk, which 
		 depends on the number of corrupted files and number of
		 Bad sectors in the Standby ASC. The Status is UNKNOWN, if
		 there is no Standby ASC in the shelf.
                "
        DEFVAL  { unknown }

        ::= { rasDsk 3 }


wakeupInterval  OBJECT-TYPE
        SYNTAX  INTEGER (12..168)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Indicates the RAS Disk diagnostics task Wake up time 
	         period, in HOURS. This Interval is configurable between
		 12 hours and 7 days. If RAS Disk diagnostics is Enabled,
		 the diagnostics starts whenever the wakeupInterval is
		 elapsed. If RAS Disk diagnostics is Enabled AND if the
		 CLI cnfrasdsk is executed, then the Disk diagnostics
		 starts immediately.
                "
        DEFVAL  { 12 }

        ::= { rasDsk 4 }


lastTime        OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (20))
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Shows the Time when the RAS Disk diagnostics was
                 Last done. The format is  DD MONTH   HH:MM:SS.
                "
        ::= { rasDsk 5 }


numBadSectors   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the Number of Bad Sectors found in the Disk.
                "
        DEFVAL  { 0 }

        ::= { rasDsk 6 }


crptdPRIfiles   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the Number of SM configuration files,
	         corrupted.
                "
        DEFVAL  { 0 }

        ::= { rasDsk 7 }


crptdFWfiles    OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the Number of FirmWare files, corrupted.
                "
        DEFVAL  { 0 }

        ::= { rasDsk 8 }

END