CISCO-MGX82XX-PXM-CLOCK-MIB.mib object view, vendor Stratacom
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-MGX82XX-PXM-CLOCK-MIB and use it to monitor vendor specific OID's.
CISCO-MGX82XX-PXM-CLOCK-MIB file content
Object view of CISCO-MGX82XX-PXM-CLOCK-MIB:
| Scalar Object |
| pxmPrimaryMuxClockSource |
.1.3.6.1.4.1.351.110.3.16.1 |
|
This object identifies the source of the
Primary Mux Clock for PXM card.
|
| pxmPrimaryInbandClockSourceLineNumber |
.1.3.6.1.4.1.351.110.3.16.2 |
|
This object indicates the inband line number.
This is applicable when pxmPrimaryMuxClockSource is
pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
|
| pxmPrimarySMClockSourceSlotNumber |
.1.3.6.1.4.1.351.110.3.16.3 |
|
This object indicates the service module slot number.
This is applicable when pxmPrimaryMuxClockSource is
pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
|
| pxmSecondaryMuxClockSource |
.1.3.6.1.4.1.351.110.3.16.4 |
|
This object identifies the source of the
Secondary Mux Clock for PXM card.
|
| pxmSecondaryInbandClockSourceLineNumber |
.1.3.6.1.4.1.351.110.3.16.5 |
|
This object indicates the inband line number.
This is applicable when pxmSecondaryMuxClockSource is
pxmInbandClock1(1) or pxmServiceModuleClock2 (5).
|
| pxmSecondarySMClockSourceSlotNumber |
.1.3.6.1.4.1.351.110.3.16.6 |
|
This object indicates the service module slot number.
This is applicable when pxmSecondaryMuxClockSource is
pxmServiceModuleClock1(2) or pxmServiceModuleClock2(6).
|
| pxmCurrentClock |
.1.3.6.1.4.1.351.110.3.16.7 |
|
This object represents the clock source currently
selected for PXM card.
primary(1): The primary clock source is described by
pxmPrimaryMuxClockSource
secondary(2): The secondary clock source is described by
pxmSecondaryMuxClockSource.
intOscillator(3): Current clock is internal oscillator.
|
| pxmPreviousClock |
.1.3.6.1.4.1.351.110.3.16.8 |
|
This object represents the clock source previously
selected for PXM card.
|
| pxmExtClockPresent |
.1.3.6.1.4.1.351.110.3.16.9 |
|
Status of External T1/E1 Clock on PXM card.
|
| pxmExtClkSrcImpedance |
.1.3.6.1.4.1.351.110.3.16.10 |
|
Impedance on external clock input for PXM card.
|
| pxmExtClkConnectorType |
.1.3.6.1.4.1.351.110.3.16.11 |
|
This object describes the type of connector available
for connecting the external clock source to the PXM.
|
| pxmClkStratumLevel |
.1.3.6.1.4.1.351.110.3.16.12 |
|
This object describes the lowest stratum level
provided by the interface the external clock source to
the PXM back card.
|
| pxmClkErrReason |
.1.3.6.1.4.1.351.110.3.16.13 |
|
This object gives more information about clock
status.
The possible values are :
goodClk(1) : Clock is good
unkownReason(2) : reason not known
noClkSignal(3) : Loss of signal(LOS) on clock source
freqTooHigh(4) : frequency drifted too high
freqTooLow(5) : frequency drifted too low
excessiveJitter(6) : jitter has exceeded the tolerance
missingCard (7) : no clock hardware found
missingLogicalIf(8): Logical Interface missing
or not operational
noClock (9): No clock.
|
| pxmExtClock2Present |
.1.3.6.1.4.1.351.110.3.16.14 |
|
This object indicates the status of external T1/E1
Clock on port 2 of PXMUI-S3 back card.
|
| pxmExtClk2SrcImpedance |
.1.3.6.1.4.1.351.110.3.16.15 |
|
This object provides the impedance on external clock
input on port 2 of PXMUI-S3 back card.
|
| pxmExtClk2ConnectorType |
.1.3.6.1.4.1.351.110.3.16.16 |
|
This object describes the type of connector
available for connecting the external clock source
to the port 2 of PXM-UI-S3 back card of PXM.
|
| Object Identifier |
| ciscoMgx82xxPxmClockMIB |
.1.3.6.1.4.1.351.150.72 |
|
The MIB module to describe the clock configuration
in Processor Switch Module(PXM) in MGX82xx product.
Back cards supported for PXM1:
PXM-UI : T1 Clock port, E1 Clock Port
PXM-UI-S3 : External Clock1 for T1/E1 Clock input.
|
| pxmClockConfig |
.1.3.6.1.4.1.351.110.3.16 |
| cmpClockMIBConformance |
.1.3.6.1.4.1.351.150.72.2 |
| cmpClockMIBGroups |
.1.3.6.1.4.1.351.150.72.2.1 |
| cmpClockMIBCompliances |
.1.3.6.1.4.1.351.150.72.2.2 |
| Group |
| cmpClockInfoGroup |
.1.3.6.1.4.1.351.150.72.2.1.1 |
|
The collection of objects which are used for
providing information on PXM Clock configuration.
|
| cmpPrimaryClockInfoGroup |
.1.3.6.1.4.1.351.150.72.2.1.2 |
|
The collection of objects which are used for
providing information on Primary Clock configuration.
|
| cmpSecondaryClockInfoGroup |
.1.3.6.1.4.1.351.150.72.2.1.3 |
|
The collection of objects which are used for
providing information on Secondary Clock configuration.
|
| cmpExtClockInfoGroup |
.1.3.6.1.4.1.351.150.72.2.1.4 |
|
The collection of objects which are used for
providing general information on PXM Clock
configuration.
|
