CISCO-MGX82XX-RPM-RSRC-PART-MIB.mib object view, vendor Stratacom
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-MGX82XX-RPM-RSRC-PART-MIB and use it to monitor vendor specific OID's.
CISCO-MGX82XX-RPM-RSRC-PART-MIB file content
Object view of CISCO-MGX82XX-RPM-RSRC-PART-MIB:
| Scalar Object |
| rpmIfCnfRscPartEntry |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1 |
|
An entry for resource partition configuration
on a logical interface. A resource partition need
to be configured before connections(or connection endpoints)
can be added to the interface.
|
| Tabular Object |
| rpmIfRscSlotNum |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.1 |
|
This object identifies the slot number of the
RPM card in MGX shelf.
|
| rpmIfRscPartIfNum |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.2 |
|
This is backplane interface number.
Currently there is only one interface and value
1 is the only value supported.
|
| rpmIfRscPartCtrlrNum |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.3 |
|
This object identifies the type of the controller
which owns the resource partition.
par(1) : Portable Auto Route Controller. This is a controller
software implementing Cisco Proprietary protocol
for network routing and topology.
pnni(2): Private Network-to-Network Interface(PNNI)
controller. This is a controller implementing
ATM Forum PNNI protocol for routing.
tag(3) : Tag Switching(MPLS) controller. This is
a controller supporting MPLS protocol.
|
| rpmIfRscPrtRowStatus |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.4 |
|
This object contains the information on whether
subinterface exists or being modified.
add(1) : sub-interface exists
del(2) : sub-interface deleted
mod(2) : sub-interface being modified
|
| rpmIfRscPrtIngrPctBandwidth |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.5 |
|
The percentage of logical interface bandwidth.
|
| rpmIfRscPrtEgrPctBandwidth |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.6 |
|
The percentage of logical interface bandwidth.
|
| rpmIfRscPrtVpiLow |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.7 |
|
The beginning of the VPI range
reserved for this partition.
|
| rpmIfRscPrtVpiHigh |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.8 |
|
The end of the VPI range
reserved for this partition.
|
| rpmIfRscPrtVciLow |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.9 |
|
The beginning of the VCI range reserved
for this partition. This field is only
valid for logical interfaces configured
with a single VPI.
|
| rpmIfRscPrtVciHigh |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.10 |
|
The end of the VCI range reserved
for this partition. This field is
only valid for logical interfaces
configured with a single VPI.
|
| rpmIfRscPrtMaxChans |
.1.3.6.1.4.1.351.110.5.2.9.2.1.1.11 |
|
This represents maximum number of
channels(connections) that are available
to the controller.
|
| Table |
| rpmIfCnfRscPartTable |
.1.3.6.1.4.1.351.110.5.2.9.2.1 |
|
The table is for RPM interface
resource partition.
|
| Object Identifier |
| ciscoMgx82xxRpmRsrcPartMIB |
.1.3.6.1.4.1.351.150.61 |
|
The MIB module to manage resource partition objects.
A resource partition is configured on a RPM subinterface.
An administrator can partition connection related
resources like VPI, VCI ranges, bandwidth and total
amount of available connection entries in the switch
through these MIB tables.
|
| rpmIfCnfResPart |
.1.3.6.1.4.1.351.110.5.2.9.2 |
| cmrRsrcPartMIBConformance |
.1.3.6.1.4.1.351.150.61.3 |
| cmrRsrcPartMIBCompliances |
.1.3.6.1.4.1.351.150.61.3.1 |
| cmrRsrcPartMIBGroups |
.1.3.6.1.4.1.351.150.61.3.2 |
| Group |
| cmrRsrcPartMIBGroup |
.1.3.6.1.4.1.351.150.61.3.2.1 |
|
The collection of objects related to
configuration of Resource partition.
|
