| configVrtlIntrNum |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.1 |
|
Virtual Interface Number. There are totaly.
32 Virtual Interfaces on the card (egress).
|
| vrtlIntrPortNum |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.2 |
|
Port number which will be connected to the
Virtual Interface. Value zero meens that this
virtual interface is not connected to any port.
|
| vrtlIntrState |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.3 |
|
Virtual Interface State.
|
| vrtlIntrMaxQueMem |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.4 |
|
Virtual Interface's Max queue memory.
1 = 4Kcells
2 = 8Kcells
3 = 16Kcells
4 = 32Kcells
5 = 64Kcells
6 = 128Kcells
7 = 256Kcells
8 = 512Kcells.
|
| vrtlIntrMinCellRate |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.5 |
|
Virtual Interface's minimum cell rate.
The default value:
for OC12 port is 1412832 cells/sec
for OC3 port is 353208 cells/sec
for T3 port is 96000 cells/sec
for E3 port is 80000 cells/sec
|
| vrtlIntrMaxCellRate |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.6 |
|
Virtual Interface's maximum cell rate.
The default value:
for OC12 port is 1412832 cells/sec
for OC3 port is 353208 cells/sec
for T3 port is 96000 cells/sec
for E3 port is 80000 cells/sec
|
| vrtlIntrCurrConfigPaths |
.1.3.6.1.4.1.351.110.5.2.8.1.1.1.7 |
|
This is not a configurable parameter.
This gives the count of paths currently configured on this
virtual interface.
|
| countVrtlIntrNum |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.1 |
|
Virtual Interface Number.
|
| vrtlIntrTotalCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.2 |
|
Total number of cells (VC plus Qbin) that belong to
this Virtual Interface.
|
| vrtlIntrTotalQbinCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.3 |
|
Total number of cells in the Qbin belonging
to this Virtual Interface.
|
| vrtlIntrRxdValidOAMCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.4 |
|
Total number of OAM cell received.
|
| vrtlIntrRxdRmCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.5 |
|
Total number of RM cells Received.
|
| vrtlIntrRxdClpUntaggedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.6 |
|
Total number of CLP-0 cells Received.
|
| vrtlIntrRxdClpTaggedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.7 |
|
Total number of CLP-1 cells Received.
|
| vrtlIntrRxdClpUntaggedDiscardedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.8 |
|
Total number of CLP-0 cells discarded at Ingress.
|
| vrtlIntrRxdClpTaggedDiscardedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.9 |
|
Total number of CLP-1 cells discarded at Ingress.
|
| vrtlIntrXmtdOAMCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.10 |
|
Total number of OAM cells transmitted.
|
| vrtlIntrXmtdRmCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.11 |
|
Total number of RM(Resource Monitoring)
cells transmitted.
|
| vrtlIntrXmtdClpUntaggedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.12 |
|
Total number of CLP-0 cells transmitted.
|
| vrtlIntrXmtdClpTaggedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.2.1.1.13 |
|
Total number of CLP-1 cells transmitted.
|
| queConfigVrtlIntrNum |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.1 |
|
Virtual Interface Number.
|
| queConfigVrtlIntrQbinNum |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.2 |
|
Virtual Interface Qbin Number. There are totaly 16 Qbin
per Virtual Interface.
|
| vrtlIntrQbinState |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.3 |
|
Virtual Interface QBIN state.
|
| vrtlIntrQbinPri |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.4 |
|
This indicates the priority of the QBIN service
within the Virtual Interface.
|
| vrtlIntrQbinRate |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.5 |
|
The rate at which cells in the QBIN are serviced.
Max Cell rate for OC3 interface is 353208 cell/sec.
|
| vrtlIntrQbinDiscardSelection |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.6 |
|
Virtual Interface QBin Congestion control option.
|
| vrtlIntrQbinMaxThreshold |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.7 |
|
Max cells that can be queued in the QBIN.
The Get value will be different from the Set
value because of FW internal round up.
|
| vrtlIntrQbinClpHiThreshold |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.8 |
|
The threshold above which the tagged cells
will be dropped.
The Get value will be different from the Set
value because of FW internal round up.
|
| vrtlIntrQbinClpLoThreshold |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.9 |
|
Valid only if congestion control is set to
CLP hysterises. The threshold upto which the
dropping of the tagged cells should continue once
it has crossed CLP HI threshold.
The Get value will be different from the Set
value because of FW internal round up.
|
| vrtlIntrQbinFrameDiscardThreshold |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.10 |
|
Valid only if congestion control is set to
Frame Discard. It is the threshold after which
the QE will start discarding the entire frame
if one or more cells of the frame is discarded..
The Get value will be different from the Set
value because of FW internal round up.
|
| vrtlIntrQbinEfciThreshold |
.1.3.6.1.4.1.351.110.5.2.8.3.1.1.11 |
|
The threshold above which the EFCI bits of
the cell is set.
The Get value will be different from the Set
value because of FW internal round up.
|
| queConuterVrtlIntrNum |
.1.3.6.1.4.1.351.110.5.2.8.4.1.1.1 |
|
Virtual Interface Number.
|
| queCounterVrtlIntrQbinNum |
.1.3.6.1.4.1.351.110.5.2.8.4.1.1.2 |
|
Virtual Interface Qbin Number. There are totaly 16 Qbin
per Virtual Interface.
|
| vrtlIntrQbinCurrentCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.4.1.1.3 |
|
Total number of cells currently in the Qbin.
|
| vrtlIntrQbinRxdCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.4.1.1.4 |
|
Total number of cells arrived to the QBIN.
|
| vrtlIntrQbinTxdCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.4.1.1.5 |
|
Total number of cells departured from QBIN.
|
| vrtlIntrQbinDiscardedCellCnt |
.1.3.6.1.4.1.351.110.5.2.8.4.1.1.6 |
|
Total number of arrivals to QBIN which were discarded.
|
