AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | IoT | IT Service | Network/System | Infra | Performance | Protocol | SaaS | Security | Service Level | Storage | Linux | VMware | VoIP | Web | Wireless | SNMP

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Stratacom » CISCO-MGX8800-IF-MAPPING-MIB

CISCO-MGX8800-IF-MAPPING-MIB device MIB details by Stratacom

CISCO-MGX8800-IF-MAPPING-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-MGX8800-IF-MAPPING-MIB.


Vendor: Stratacom
Mib: CISCO-MGX8800-IF-MAPPING-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools) 
-- *****************************************************************
-- ciscoMGX8800IfMapping MIB - MGX8800 IF-Mapping MIB
--
-- October 2002, Asok Tiyyagura
-- March 2003, Jeffrey Liang
-- December 2003, Qing Yu
-- Apr 2004, Sheldon Chan
-- May 2004, Feng Luo
--
-- Copyright (c) 1999-2000, 2001, 2002, 2003, 2004 cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-MGX8800-IF-MAPPING-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Unsigned32           FROM SNMPv2-SMI
    TEXTUAL-CONVENTION   FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP         FROM SNMPv2-CONF
    InterfaceIndex       FROM IF-MIB 
    ciscoWan   	         FROM CISCOWAN-SMI;

ciscoMGX8800IfMappingMIB MODULE-IDENTITY
    LAST-UPDATED   "200405250000Z"
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO
        "           Cisco Systems
                    Customer Service

            Postal: 170 W Tasman Drive
                    San Jose, CA  95134
                    USA

               Tel: +1 800 553-NETS

            E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "This MIB module is used for getting the ifIndex values 
         given physical location and/or logical information.
         The physical information includes the slot, back-card
         and physical line, IMA group ID, MFR (Multilink Frame Relay)
         bundle etc. The logical information includes the logical 
         interface or virtual interface number.
 
         In this MIB back card, bay, line module are used to
         refer to the back card.
        "

    REVISION  "200405250000Z"
    DESCRIPTION
        "Added following enums to CmimIfType:
            lapd(24). 
        "

    REVISION  "200404300000Z"
    DESCRIPTION
        "Added following enums to CmimIfType:
            ppplink(22), pppMultilinkBundle(23), 
        "
    REVISION  "200312040000Z"
    DESCRIPTION
        "Added new enum mfrBundle(21) to CmimIfType.
        "
    REVISION  "200303200000Z"
    DESCRIPTION
        "Fixed alignments and descriptions.
        "
    REVISION  "200210210000Z"
    DESCRIPTION
        "1. Added following enums to CmimIfType:
            ds1VTPath(18), ds1Ds3SonetPath(19) and atmVciEndPt(20)
         2. Modified description for cmimModuleIndex, CmimIfType
            and cmimIfNumber to describe the rules to form a
            query to obtain ifIndex for ds1VTPath, ds1Ds3SonetPath
            and atmVciEndPt.
        " 
    REVISION  "200210160000Z"
    DESCRIPTION
        "1. Added following enums to CmimIfType:
            frameRelayPort(16), ces(17).
         2. Modified description for cmimModuleIndex, CmimIfType
            and cmimIfNumber to describe the rules to form a
            query to obtain ifIndex for frame relay and ces 
            interfaces.
        "
    REVISION  "200205210000Z"
    DESCRIPTION
        "1. Added following enums to CmimIfType:
            sonetPath(12), ds3SonetPath(13),
            atmSonetPath(14), atmDs3SonetPath(15).
         2. Modified description for cmimModuleIndex, CmimIfType
            and cmimIfNumber to describe the rules to form a
            query to obtain ifIndex for SONET Path, ds3 path on 
            a SONET path and corresponding ATM Cell layers.
         3. Imported Unsigned32 from SNMPv2-SMI instead of 
            CISCO-TC.
        "
    REVISION  "200202170000Z"
    DESCRIPTION
        "Added enums srmBertLine(10) and srmBertPort(11) to CmimIfType
         and modified descriptions of cmimIfNumber and CmimIfType, 
         explaining how to discover the interface indexes of  
         physical lines and logical ports of narrow-band service 
         modules (NBSM) that obtain BERT service through Service 
         Resource Module (SRM).
        "
    REVISION  "200110160000Z"
    DESCRIPTION
        "Added enum sonetVT(8) and imaGrpAtmPhy(9) for CmimIfType,
         and modified descriptions for cmimIfNumber and CmimIfType.
        "
    REVISION  "200107080000Z"
    DESCRIPTION
        "Added following enumerations to Textual-convention CmimIfType:
         adjCardApsLine(6), propAtm(7).
        "
    REVISION  "200002120000Z"
    DESCRIPTION 
        "Initial version of this MIB Module" 

	::= { ciscoWan 7 }

CmimIfType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The interface types.
        "
    SYNTAX INTEGER {
        physicalLine(1),     -- for ifType sonet, ds3,  ds1, 
                             -- ethernet etc.
        atmIma(2),           -- for ifType = atmIma(107)
        atm(3),	             -- for ifType = atm(37)
        atmVirtual(4),       -- for ifType = atmVirtual(149)
        ds1Inds3(5),         -- for DS1s in a DS3, E1s in E3
        adjCardApsLine(6),   -- for Adjacent card APS line
        propAtm(7),          -- for ifType = propAtm(197)
        sonetVT(8),          -- for ifType = sonetVT(51)
        imaGrpAtmPhy(9),     -- for ifType = atm(37) with ATM
                             -- IMA phy query
        srmBertLine(10),     -- for BERT interfaces of NBSM 
                             -- physical lines
        srmBertPort(11),     -- for BERT interfaces of NBSM 
                             -- logical ports
        sonetPath(12),       -- for STS-N paths and SDH AUs
        ds3SonetPath(13),    -- for DS3 path carried by 
                             -- STS-N/AU Path
        atmSonetPath(14),    -- for ATM Cell Layer carried by 
                             -- STS-N/AU Path
        atmDs3SonetPath(15), -- for ATM Cell Layer carried by 
                             -- DS3 on STS-N/AU Path
        frameRelayPort(16),  -- for ifType = frameRelayService(44),
	                     -- frForward(158) and atmFuni(106)
        ces(17),             -- for ifType = ces(133)
        ds1VTPath(18),       -- for ds1 in VT, ifType = 18
        ds1Ds3SonetPath(19), -- for ds1 in Ds3 on STS1, ifType = 18
        atmVciEndPt(20),     -- for ifType atmVciEndPt = 194
        mfrBundle(21),       -- for ifType frf16MfrBundle = 163        
        ppplink(22),         -- for ifType ppp = 23 
        pppMpbundle(23),     -- for ifType pppMultilinkBundle = 108 
        lapd(24)             -- for ifType = lapd(77)
        }

cmimMappingObjects OBJECT IDENTIFIER ::= { ciscoMGX8800IfMappingMIB 1 }
cmimPhysToIf	   OBJECT IDENTIFIER ::= { cmimMappingObjects 1 }
 
cmimPhysToIfTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF CmimPhysToIfEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION   
        "This table contains one or more rows, representing 
         mappings of physical or logical interfaces to ifIndex
         values.
        "
    ::= { cmimPhysToIf 1 }

cmimPhysToIfEntry OBJECT-TYPE
    SYNTAX      CmimPhysToIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION   
        "Information about a particular physical interface or 
         logical interface.
        "
    INDEX  { cmimModuleIndex, cmimIfNumber, cmimIfType }
    ::= { cmimPhysToIfTable 1 }

CmimPhysToIfEntry ::=
    SEQUENCE {
        cmimModuleIndex   Unsigned32,
        cmimIfNumber      Unsigned32,
        cmimIfType        CmimIfType,
        cmimIfIndex       InterfaceIndex
        }

cmimModuleIndex OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  
        "An index value that uniquely identifies the location 
         of the module or a physical line.
         It has the information on slot number, back card
         and physical line number. Following is the mapping 
         used for this object.

         Mapping used when cmimIfType is physicalLine(1), atm(3),
         adjCardApsLine(6), imaGrpAtmPhy(9) and mfrBundle(21)

          Bits 0-7   : Ignored
          Bits 8-15  : Back Card Number (0 - Ignored, 1-Top Back card
                                         2 - Bottom Back card)
          Bits 16-23 : Logical slot number
          Bits 24-31 : Shelf number
                       (1 - Currently, only value 1 is supported)

          Mapping used when cmimIfType is set to ds1Inds3(5),
          sonetVT(8), sonetPath(12), ds3SonetPath(13), 
          atmSonetPath(14), atmDs3SonetPath(15), ds1VTPath(18),
          ds1Ds3SonetPath(19) and lapd(24)

          Bits 0-7   : DS3/E3/Sonet/Sdh physical line number
          Bits 8-15  : Back Card Number (0 - Ignored, 1-Top Back card
                                         2 - Bottom Back card.
          Bits 16-23 : Logical slot number
          Bits 24-31 : Shelf number 
                       (1 - Currently, only value 1 is supported)

          Mapping used when cmimIfType is set to propAtm(7),
          frameRelayPort(16), ces(17), atmVciEndPt(20), ppplink(22)
          and pppMpbundle(23).

          Bits 0-7   : 0  Ignored
          Bits 8-15  : 0  Ignored
          Bits 16-23 : Logical slot number
          Bits 24-31 : Shelf number (1 - only value 1 is supported)

          Mapping used when cmimIfType is set to srmBertLine(10) or
          srmBertPort(11) 

          Bits 0-7   : 0  Ignored
          Bits 8-15  : Logical slot number of NBSM
          Bits 16-23 : Logical slot number of SRM
          Bits 24-31 : Shelf number (1 - only value 1 is supported)
	 "
    ::= { cmimPhysToIfEntry 1 }

cmimIfNumber OBJECT-TYPE
    SYNTAX       Unsigned32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION   
        "An index value uniquely identifies the interface
         number (physical, logical) of the module. The 
         value specified depends on the value specified in 
         cmimIfType.
	     
         cmimIfType	            cmimIfNumber
         ----------              ------------

         physicalLine(1)         physical line number
         atm(3)	                 physical line number for atm phy 
                                 number
         ds1Inds3(5)             DS1/E1 line number in a DS3/E3
         adjCardApsLine(6)       adjacent card APS line number
         propAtm(7)              set to 1, this is the only value
                                 supported at this time
         sonetVT(8)              DSxN tributary in a sonet/sdh line
         imaGrpAtmPhy(9)         atm ima group for atm phy number
         srmBertLine(10)         physical line number of NBSM
         srmBertPort(11)         logical port number of NBSM.
         sonetPath(12)           STS-1/AU-3 Path Number
         atmSonetPath(14)        STS-1/AU-3 Path Number   
         ds3SonetPath(13)        Bits 0..15 : STS-1/AU-3 Path Number
                                 Bits 16..31: 1 for STS-1/AU-3 
                                 or DS3 Number within AU-4 
         atmDs3SonetPath(15)     Bits 0..15 : STS-1/AU-3 Path Number
                                 Bits 16..31: 1 for STS-1/AU-3 
                                 or DS3 Number within AU-4
         frameRelayPort(16)      logical port number for frame 
                                 interface
         ces(17)                 logical port number of circuit
                                 emulation service interface
         ds1InVT(18)             Bits 0..7 :  VT Number
                                 Bits 8..15:  VT group number
                                 Bits 16..31: STS-1/AU-3 Path Number
         ds1Ds3SonetPath(19)     Bits 0..7 :  ds1 Number
                                 Bits 8..15:  ds3 Number
                                 Bits 16..31: STS Path Number
         atmVciEndPt(20)         Bits 0..15 : VCI 
                                 Bits 16..27: VPI 
                                 Bits 28..31: Port(ATM)
         mfrBundle(21)           Multilink Frame Relay bundle number
         ppplink(22)             ppp index of the ppp interface
         pppMpbundle(23)         mpbundle index of the mpbundle 
                                 interface 
         lapd(24)                Bits 0..7  : ds0 number
                                 Bits 8..15 : VT number or ds1 number
                                 Bits 16..23: VT group (DS3 ignore it) 
                                 Bits 24..31: STS or DS3 path
        "
    ::= { cmimPhysToIfEntry 2 }

cmimIfType OBJECT-TYPE
    SYNTAX       CmimIfType
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION 
        "The type of interface specified by cmimIfNumber."
    ::= { cmimPhysToIfEntry 3 }

cmimIfIndex OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION 
        "The value of the instance of the ifIndex object,
         defined in MIB-II, for the interface corresponding
         to the INDEXes specified in the table.

         Note that the values returned for cmimIfType=srmBertLine(10) 
         and cmimIfType=srmBertPort(11) will not have any entries 
         in the IF-TABLE.
        "
    ::= { cmimPhysToIfEntry 4 }

-- conformance information
 
cmimPhysToIfMIBConformance 
    OBJECT IDENTIFIER ::= { ciscoMGX8800IfMappingMIB 3 }

cmimPhysToIfMIBCompliances 
    OBJECT IDENTIFIER ::= { cmimPhysToIfMIBConformance 1 }

cmimPhysToIfMIBGroups      
    OBJECT IDENTIFIER ::= { cmimPhysToIfMIBConformance 2 }

cmimPhysToIfMIBCompliance MODULE-COMPLIANCE
    STATUS       current
    DESCRIPTION
        "The compliance statement for cmimPhystoIfTable.
        "
    MODULE -- this module
    MANDATORY-GROUPS { cmimPhysToIfMIBGroup }
    ::= { cmimPhysToIfMIBCompliances 1 }

-- units of conformance

cmimPhysToIfMIBGroup OBJECT-GROUP
    OBJECTS {
        cmimIfIndex
        }
    STATUS       current
    DESCRIPTION
        "This group has to be implemented on all MGX8800 
         series products.
        "
    ::= { cmimPhysToIfMIBGroups 1 }

END