CISCO-VISM-RSRC-PART-MIB.mib object view, vendor Stratacom
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-VISM-RSRC-PART-MIB and use it to monitor vendor specific OID's.
CISCO-VISM-RSRC-PART-MIB file content
Object view of CISCO-VISM-RSRC-PART-MIB:
| Scalar Object |
| vismPortResPartCnfGrpEntry |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1 |
|
An entry for port resource partition.
|
| Tabular Object |
| vismResPartPortNum |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.1 |
|
This is the index to vismPortResPartCnfGrpTable.
If PXM1(Processor Switch Module) is used on the
shelf this object should be set to 1. For PXM1E
this object should be set to 255.
|
| vismResPartCtrlrNum |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.2 |
|
This is index to vismPortResPartCnfGrpTable.
|
| vismResPartRowStatus |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.3 |
|
This will 'add', 'delete' or 'modify' the partition.
To delete an entry, this object has to be set to 'del'.
The resource partition can be deleted only after
deleting all the connections Logical Channel
Numbers(LCNs).
|
| vismResPartNumOfLcnAvail |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.4 |
|
This represents number of LCNs available for this
controller and this port. The default value for this
object is chosen based on the object vismMode
(defined in CISCO-VISM-MODULE-MIB MIB) :
|
| vismResPartLcnLow |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.5 |
|
This represents low end of reserved LCN. The LCN
identifies the local VCI(Virtual Channel Identifier)
value on the VISM when adding a connection.
|
| vismResPartLcnHigh |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.6 |
|
This represents high end of reserved LCN. The LCN
identifies the local VCI value on the VISM when
adding a connection.
|
| vismResPartIngrPctBW |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.7 |
|
The percentage of total ingress bandwidth reserved.
Since we have only one LCN for VoIP(Voice Over IP),
the value is 100.
|
| vismResPartEgrPctBW |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.8 |
|
The percentage of total egress bandwidth reserved
Since we have only one LCN for VoIP, the value
is 100.
|
| vismResPartCtrlrID |
.1.3.6.1.4.1.351.110.5.5.2.2.1.1.9 |
|
This is the controller identifier of the PNNI
(Private Network to Network Interface) controller.
|
| Table |
| vismPortResPartCnfGrpTable |
.1.3.6.1.4.1.351.110.5.5.2.2.1 |
|
The vismPortResPartCnfGrpTable contains the
configuration of port resource partition.
Currently this table contains a single row.
|
| Object Identifier |
| ciscoVismRsrcPartMIB |
.1.3.6.1.4.1.351.150.93 |
|
The MIB module containing Port Resource
Partition information for VISM service module.
|
| vismPortResPartCnfGrp |
.1.3.6.1.4.1.351.110.5.5.2.2 |
| ciscoVismRsrcPartMIBConformance |
.1.3.6.1.4.1.351.150.93.2 |
| ciscoVismRsrcPartMIBGroups |
.1.3.6.1.4.1.351.150.93.2.1 |
| ciscoVismRsrcPartMIBCompliances |
.1.3.6.1.4.1.351.150.93.2.2 |
| Group |
| ciscoVismRsrcPartGroup |
.1.3.6.1.4.1.351.150.93.2.1.1 |
|
The collection of objects which are used to represent
VISM Port Resource Partition configuration.
|
