CISCO-WAN-AAL2-PROFILES-MIB.mib object view, vendor Stratacom
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-WAN-AAL2-PROFILES-MIB and use it to monitor vendor specific OID's.
CISCO-WAN-AAL2-PROFILES-MIB file content
Object view of CISCO-WAN-AAL2-PROFILES-MIB:
| Scalar Object |
| aal2ProfilesGrpEntry |
.1.3.6.1.4.1.351.150.17.1.1.1.1 |
|
An entry in the vismAal2ProfilesGrpTable.
All the entries in this table are implicitly created
when the card comes up.
|
| Tabular Object |
| aal2ProfileType |
.1.3.6.1.4.1.351.150.17.1.1.1.1.1 |
|
This object serves as the first index into this table.
Only the following combination of aal2ProfileType and
aal2ProfileNumber will be found in the table.
first entry containing itu 1
second containing itu 2
third containing itu 3
fourth containing itu 7
fifth containing itu 8
sixth containing itu 12
seventh containing custom 100
eighth containing custom 101
ninth containing custom 110.
tenth containing custom 200
eleventh containing custom 201
twelveth containing custom 210
|
| aal2ProfileNumber |
.1.3.6.1.4.1.351.150.17.1.1.1.1.2 |
|
This object serves as the second index into this table.
The pre-defined ITU aal2ProfileNumber are specify in
ITU-T I.366.2 standard.
'one' - G.711u/G.711a(No SID - Silence insertion
descriptor) based on T1/E1 card type.
'two' - G.711u/G.711a(SID Generic) based on T1/E1 card type.
'three' - G.726-40 kbps(SID Generic), G.726-32 kbps(SID
Generic), G.726-24 kbps(SID Generic), G.726-16
kbps(SID Generic), G.711u/G.711a(SID Generic).
'seven' - G.729ab(SIG G729)/G.729a(No SID),
G.711u/G.711a(SID Generic).
'eight' - G.729ab(SID G729)/G.729a(No SID),
G.711u/G.711a(No SID), G.726-32 kbps(No SID).
'twelve'- G.723AH(SID G723), G.723H(No SID), G.723AL
(SID G723), G.723L(No SID).
'oneHundred'(custom 100) - G.726-32 kbps(SID Generic),
G.711u/G.711a(SID Generic).
'oneHundredOne'(custom 101) - G.729ab(SID G729)/G.729a
(No SID), G.726-32 kbps(No SID),
G.711u/G.711a(No SID)
'oneHundredTen'(custom 110) - G.729ab(SID G729)/G.729a
(No SID), G.726-32 kbps(SID Generic),
G.711u/G.711a(SID Generic).
'twoHundred'(custom 200) - clearChannel.
'twoHundredOne'(custom 201) - Lossless.
'twoHundredTen'(custom 210) - G.729ab(SID G729)/G.729a
(No SID), G.726-32 kbps(No SID),
G.711u/G.711a(No SID).
|
| aal2ProfilePreference |
.1.3.6.1.4.1.351.150.17.1.1.1.1.3 |
|
This object is used to configure the preference of one
profile over another. A profile with a preference of
zero (0) means that this profile element will not be
used. A non-zero value with a lower number has a
higher preference. The range of writable values is
limited to the number of profiles, which means the
number of rows in this table.
If two or more entries has the same preference number then
the first entry in the table will be used.
The default preference for each profile will be as
follows :
itu 3 = 1
itu 7 = 2
itu 2 = 3
itu 1 = 4
itu 8 = 5
custom 100 = 6
custom 101 = 7
custom 110 = 8
custom 200 = 9
itu 12 = 10
custom 201 = 11
custom 210 = 12
|
| aal2ProfileVoiceCodec |
.1.3.6.1.4.1.351.150.17.1.1.1.1.4 |
|
This object determines the codecs to be used in this profile.
Validation will be done before setting this object based
on the current template used in the card.
The default value of this object depends upon the profile
for itu 1 = G.711u/G.711a based on T1/E1 card type
itu 2 = G.711u/G.711a based on T1/E1 card type
itu 3 = G.726 at rate 32 kbps
itu 7 = G.729ab
itu 8 = G.729ab
custom 100 = G.726 at rate 32 kbps
custom 101 = G.729ab
custom 110 = G.729ab
custom 200 = clearChannel
itu 12 = G.723 family
custom 201 = Lossless
custom 210 = G.729a
'g711u' stands for G.711u
'g711a' stands for G.711a
'g726r32000' stands for G.726 at rate 32 kbps
'g729a' stands for G.729a
'g729ab' stands for G.729ab
'g726r16000' stands for G.726 at rate 16 kbps
'g726r24000' stands for G.726 at rate 24 kbps
'g726r40000' stands for G.726 at rate 40 kbps
'g723h' stands for G.723.1-H
'g723l' stands for G.723.1-L
'g723ah' stands for G.723.1a-H
'g723al' stands for G.723.1a-L
'lossless' stands for Lossless
|
| aal2ProfileVoicePktPeriod |
.1.3.6.1.4.1.351.150.17.1.1.1.1.5 |
|
This object is used to configure the packetization period in
millisecs for a given codec.
The default value of this object depends upon the profile
for itu 1 = 5 (Applicable value is only 5)
itu 2 = 5 (Applicable value is only 5)
itu 3 = 5 (Applicable value is only 5)
itu 7 = 10 (Applicable values are 5 & 10)
itu 8 = 10 (Applicable values are 5 & 10)
itu 12 = 30 (Applicable value is only 30)
custom 100 = 10 (Applicable values are 5 & 10)
custom 101 = 10 (Applicable values are 5 & 10)
custom 110 = 30 (Applicable values are 5,10 & 30)
custom 200 = 5 (Applicable value is only 5)
custom 201 = 5 (Applicable value is only 5)
custom 210 = 20 (Applicable value are only 5, 10 & 20)
|
| aal2ProfileVoiceVAD |
.1.3.6.1.4.1.351.150.17.1.1.1.1.6 |
|
This object defines whether or not the VAD (Voice Activity
Detection) has to be applied or not when the current
profile is chosen. Upon detection of silence based on the
configuration in this object either generic SID packet as
specified in I.366.2 standards or SID 729 packet will be
sent to the other end.
The default value of this object depends on the profile:
itu 1 = on - silence suppression enabled with no SID
itu 2 = sidGeneric
itu 3 = sidGeneric
itu 7 = sid729
itu 8 = sid729
itu 12 = sid723
custom 100 = sidGeneric
custom 101 = sid729
custom 110 = sid729
custom 200 = off - silence suppression disabled with no SID.
custom 201 = off - silence suppression disabled with no SID.
custom 210 = off - silence suppression disabled with no SID.
|
| aal2ProfileVBDCodec |
.1.3.6.1.4.1.351.150.17.1.1.1.1.7 |
|
This object determines the voice band data (VBD)
codecs to be used when upspeed happens.
The default value of this object depends upon the profile
for itu 1 G.711u/G.711a based on T1/E1 card type
itu 2 G.711u/G.711a based on T1/E1 card type
itu 3 G.711u/G.711a based on T1/E1 card type
itu 7 G.711u/G.711a based on T1/E1 card type
itu 8 G.711u/G.711a based on T1/E1 card type
itu 12 G.723.1-H
custom 100 G.711u/G.711a based on T1/E1 card type
custom 101 G.711u/G.711a based on T1/E1 card type
custom 110 G.711u/G.711a based on T1/E1 card type
custom 200 clearChannel
custom 201 Lossless
custom 210 G.711u/G.711a based on T1/E1 card type
|
| aal2ProfileVBDPktPeriod |
.1.3.6.1.4.1.351.150.17.1.1.1.1.8 |
|
This object is used to configure the packetization period in
millisecs for a given VBD codec.
The default value of this object depends on the profile
for itu 1 = 5
itu 2 = 5
itu 3 = 5
itu 7 = 5
itu 8 = 5
itu 12 = 30
custom 100 = 5
custom 101 = 5
custom 110 = 5
custom 200 = 5
custom 201 = 5
custom 210 = 5
|
| Table |
| aal2ProfilesGrpTable |
.1.3.6.1.4.1.351.150.17.1.1.1 |
|
This table contains configuration information about
various profiles elements (packetization period, voice
activity detection, voice codec, preference and voice
band data codec) used in switched AAL2 PVC(Permanent
Virtual Circuit) voice calls.
|
| Object Identifier |
| ciscoWanAal2ProfilesMIB |
.1.3.6.1.4.1.351.150.17 |
|
The MIB module for configuring AAL2 profile elements. This
table will be used in AAL2 switching and trunking
applications.
|
| ciscoWanAal2ProfilesMIBObjects |
.1.3.6.1.4.1.351.150.17.1 |
| aal2ProfilesGrp |
.1.3.6.1.4.1.351.150.17.1.1 |
| aal2ProfileMIBConformance |
.1.3.6.1.4.1.351.150.17.2 |
| aal2ProfileMIBCompliances |
.1.3.6.1.4.1.351.150.17.2.1 |
| aal2ProfileMIBGroups |
.1.3.6.1.4.1.351.150.17.2.2 |
| Group |
| aal2ProfileGroup |
.1.3.6.1.4.1.351.150.17.2.2.1 |
|
This group contains objects related to configuration
of AAL2 profiles.
|
