CISCO-WAN-FEEDER-MIB device MIB details by Stratacom

CISCO-WAN-FEEDER-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-WAN-FEEDER-MIB.

Vendor:	Stratacom
Mib:	CISCO-WAN-FEEDER-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ciscoWanFeederMIB - WAN Feeder MIB
--
-- January 2000 Nimisha.Mahuvakar
-- March   2003 Jeffrey Liang
--
-- Copyright (c) 2000-2001, 2003 cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-WAN-FEEDER-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    IpAddress,
    Integer32     	 FROM SNMPv2-SMI
    RowStatus,
    DisplayString     	 FROM SNMPv2-TC
    MODULE-COMPLIANCE,
    OBJECT-GROUP 	 FROM SNMPv2-CONF
    InterfaceIndex       FROM IF-MIB
    ciscoWan       	 FROM CISCOWAN-SMI;


ciscoWanFeederMIB MODULE-IDENTITY
    LAST-UPDATED   "200303270000Z"
    ORGANIZATION   "Cisco Systems, Inc."
    CONTACT-INFO   "Cisco Systems
                    Customer Service

            Postal: 170 W Tasman Drive
                    San Jose, CA  95134
                    USA

            Tel:    +1 800 553-NETS

            E-mail: cs-wanatm@cisco.com"

    DESCRIPTION
        "This MIB is used for configuring a port on an ATM 
         switch module to be aware of feeder connection 
         information.

         Terminology:
             AR - Auto Route, a CISCO proprietary feature,
               provides connection management for network with only
               CISCO nodes such as BPX or IGX.

             Feeder - An external ATM switch, which does not 
               have PNNI feature, connected to an ATM switch 
               that supports PNNI to provide LMI. 

             LMI - Local Management Interface is an 
               interface to provide a set of enhancements to
               Frame Relay specification for managing complex
               internetworks. LMI extensions include global 
               addressing, virtual-circuit status messages,
               and multicasting. 

             XLMI - The Extended LMI is a type of LMI which
               is implemented in an AR + PNNI network." 

    REVISION   "200303270000Z"
    DESCRIPTION
        "Fixed alignments and descriptions."

    REVISION   "200010100000Z"
    DESCRIPTION
        "Added cwfLMIType object to distinguish feeder versus XLMI.
         Added enum fdrNON to cwfFeederType object." 

    REVISION   "200004250000Z"
    DESCRIPTION
        "Initial version of feeder MIB module."

    ::= { ciscoWan 15 }


cwfMIBObjects 
    OBJECT IDENTIFIER ::= { ciscoWanFeederMIB 1 }
cwfFeeder     
    OBJECT IDENTIFIER ::= { cwfMIBObjects 1 }


--
-- Feeder Table
--

cwfFeederTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CwfFeederEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table contains the entries for the feeders.
         It is used for addition or deletion of feeders and 
         to support LMI on the feeders. The information in
         these entries are advertised to LMI using a system 
         dependent implementation when an entry is 
         created/activated. This table can also be applicable 
         to XLMI."
   ::= { cwfFeeder 1 }

cwfFeederEntry  OBJECT-TYPE
    SYNTAX      CwfFeederEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry in cwfFeederTable." 
    INDEX   { cwfFeederIfNum }
    ::= { cwfFeederTable 1 }

CwfFeederEntry ::= SEQUENCE {
    cwfFeederIfNum       InterfaceIndex,
    cwfFeederName        DisplayString,
    cwfLanIP             IpAddress,
    cwfNetIP             IpAddress,
    cwfRemoteShelf       Integer32, 
    cwfRemoteSlot        Integer32, 
    cwfRemotePort        Integer32,
    cwfFeederType        INTEGER,
    cwfModelNumber       Integer32,
    cwfLMIAdminStatus    INTEGER,
    cwfLMIOperStatus     INTEGER,
    cwfFeederNodeAlarm 	 INTEGER,
    cwfFeederRowStatus   RowStatus,
    cwfLMIType           INTEGER
    }


cwfFeederIfNum OBJECT-TYPE
    SYNTAX      InterfaceIndex 
    MAX-ACCESS  not-accessible 
    STATUS      current
    DESCRIPTION 
        "This is an unique interface number of an 
         ATM virtual interface. The value of this 
         object is equal to the ifIndex of the ATM 
         virtual interface interface identified by
         ifType atmVirtual(149)."
    ::= { cwfFeederEntry 1 }

cwfFeederName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is the name of the feeder. It contains 
         a string of length zero, if the feeder name
         is not available."
    ::= { cwfFeederEntry 2 }

cwfLanIP OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is the LAN IP address of the feeder. 
         This IP address is used for ethernet interface."
    ::= { cwfFeederEntry 3 }

cwfNetIP OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is the network IP address of the feeder. 
         This IP address is used for ATM interface."
    ::= { cwfFeederEntry 4 }

cwfRemoteShelf OBJECT-TYPE
    SYNTAX      Integer32 (1..4)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is the remote shelf number of the feeder
         module."
    ::= { cwfFeederEntry 5 }

cwfRemoteSlot OBJECT-TYPE
    SYNTAX      Integer32 (1..32)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is the remote slot number of the feeder
         module."
    ::= { cwfFeederEntry 6 }

cwfRemotePort OBJECT-TYPE
    SYNTAX      Integer32 (1..64)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This is the remote physical port(line) 
         number of the feeder module."
    ::= { cwfFeederEntry 7 }

cwfFeederType OBJECT-TYPE
    SYNTAX INTEGER {
        fdrIPX(1),   
        fdrBPX(2),  
        fdrIpxAF(3),    
        fdrBASIS(4),    
        fdrUNKNOWN(5),   
        fdrUNI(6),    
        fdrAPS(7),   
        fdrIGX(8),  
        fdrIgxAF(9),   
        fdrVSI(10),     
        fdrPAR(11),
        fdrNON(12)    
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This identifies the feeeder type. fdrNON(12) 
         is applicable when cwfLMIType is xLMI(2). 
         Other values are applicable for cwfLMIType = feeder(1). 

         The possible values are:
         fdrIPX       -- Feeder is an IPX node in a routing network 
         fdrBPX       -- Feeder is an BPX node in a routing network
         fdrIpxAF     -- Feeder is a stand-alone IPX node         
         fdrBASIS     -- Feeder is a stand-alone BASIS node      
         fdrUNKNOWN   -- Feeder is unknown 
         fdrUNI       -- Feeder is a UNI AIT (phase 0)         
         fdrAPS       -- Feeder is an APS (Adjunct Processor Shelf) 
         fdrIGX       -- Feeder is an IGX node in a routing network 
         fdrIgxAF     -- Feeder is a stand-alone IGX node          
         fdrVSI       -- Feeder is an VSI Controller 
         fdrPAR       -- Feeder is a PAR 
         fdrNON       -- Non-feeder type" 
    ::= { cwfFeederEntry 8 }

cwfModelNumber OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This identifies the feeder model number." 
    ::= { cwfFeederEntry 9 }

cwfLMIAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
        up(1),
        down(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This provides the feeder LMI admin state 
         configuration capabilities for the desired
         state of interface. The value of this object 
         is ignored during row creation."
    DEFVAL { up }
    ::= { cwfFeederEntry 10 }

cwfLMIOperStatus OBJECT-TYPE
    SYNTAX INTEGER {
        up(1),
        down(2)
        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This provides the operational state of 
         the LMI connection."
    ::= { cwfFeederEntry 11 }

cwfFeederNodeAlarm OBJECT-TYPE
    SYNTAX INTEGER {
        clear(1),
        minor(2),
        major(3),
        critical(4),
        unknown(5) 
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "This identifies the feeder node alarm status. 
         It provides the alarm status in hierarchical order
         where by if there are no feeder node alarms, it is 
         signified by <clear>. If minor alarms, with no major 
         alarms, it is signified by <minor>. If the node 
         has one or more major alarms, irrespective of the
         minor alarm status, then it is signified by <major>."
    ::= { cwfFeederEntry 12 }

cwfFeederRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is used for adding or deleting a feeder entry. 
         The row can be created by setting this object to 
         'createAndGo(4)'. The row can be deleted by setting 
         this object to 'destroy(6)'.

         No other values are supported."
    ::= { cwfFeederEntry 13 }

cwfLMIType OBJECT-TYPE
    SYNTAX INTEGER { 
        feeder(1),
        xLMI(2)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This identifies the LMI type. It identifies the 
         type of network to which the LMI port is connected 
         to." 
    DEFVAL { feeder }
    ::= { cwfFeederEntry 14 }
 

--
-- Conformance Information
-- 
cwfMIBConformance 
    OBJECT IDENTIFIER ::= { ciscoWanFeederMIB 3 }

cwfMIBCompliances 
    OBJECT IDENTIFIER ::= { cwfMIBConformance 1 }

cwfMIBGroups  
    OBJECT IDENTIFIER ::= { cwfMIBConformance 2 }

cwfMIBCompliance MODULE-COMPLIANCE
    STATUS      deprecated -- replaced by cwfMIBCompliance2 
    DESCRIPTION
        "The compliance statement for feeder group."
    MODULE -- this module
    MANDATORY-GROUPS { cwfFeederGroup }
    ::= { cwfMIBCompliances 1 }


cwfMIBCompliance2 MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The Compliance statement for feeder group."
    MODULE -- this module
    MANDATORY-GROUPS { cwfFeederGroup2 }
    ::= { cwfMIBCompliances 2 }

--
-- Units of Conformance
--
cwfFeederGroup OBJECT-GROUP
    OBJECTS {
        cwfFeederName,
        cwfLanIP,
        cwfNetIP,
        cwfRemoteShelf,
        cwfRemoteSlot,
        cwfRemotePort,
        cwfFeederType,
        cwfModelNumber,
        cwfLMIAdminStatus,
        cwfLMIOperStatus,
        cwfFeederNodeAlarm,
        cwfFeederRowStatus
        }
    STATUS      deprecated
    DESCRIPTION
        "The objects related to configuring a feeder."
    ::= { cwfMIBGroups 1 }

cwfFeederGroup2 OBJECT-GROUP
    OBJECTS {
        cwfFeederName,
        cwfLanIP,
        cwfNetIP,
        cwfRemoteShelf,
        cwfRemoteSlot,
        cwfRemotePort,
        cwfFeederType,
        cwfModelNumber,
        cwfLMIAdminStatus,
        cwfLMIOperStatus,
        cwfFeederNodeAlarm,
        cwfFeederRowStatus,
        cwfLMIType
        }
    STATUS      current
    DESCRIPTION
        "The objects related to configuring feeder and 
         non-feeder(XLMI)."
    ::= { cwfMIBGroups 2 }

END