CISCO-WAN-FR-CONN-STAT-MIB device MIB details by Stratacom

CISCO-WAN-FR-CONN-STAT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-WAN-FR-CONN-STAT-MIB.

Vendor:	Stratacom
Mib:	CISCO-WAN-FR-CONN-STAT-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ciscoWanFrConnStatMIB
--
-- October 2002, Subra.Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-WAN-FR-CONN-STAT-MIB DEFINITIONS ::= BEGIN
IMPORTS

    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Integer32
                               FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP               FROM SNMPv2-CONF
    frChan                     FROM BASIS-MIB
    ciscoWan                   FROM CISCOWAN-SMI;

ciscoWanFrConnStatMIB MODULE-IDENTITY
    LAST-UPDATED    "200210180000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
       "       Cisco Systems
               Customer Service

            Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

            E-mail: cs-wanatm@cisco.com"
    DESCRIPTION
        "The MIB module for frame relay connection
        statistics.
        
        Terminologies Used:

         SIW    - Frame-Relay-to ATM Service Interworking
         
         FECN   - Forward Explicit Congestion Notification.
                  The FECN bit in Frame Relay header communicate
                  network congestion to the endpoint in the forward
                  direction.

         BECN   - Backward Explicit Congestion Notification.
                  The BECN bit in Frame Relay header communicate
                  network congestion to the endpoint in the backward
                  direction.

         DE     - Discard Eligibility. The DE bit in Frame Relay
                  header communicates the loss priority. A marked 
                  frame with a DE bit value of 1 is considered
                  less important than other frames in transmission
                  and should be discarded before frames with a 
                  DE bit value of zero.

         Tagged - Some of the statistics objects described in 
                 this MIB are applicable where the 
                 information is Set by the Switch/Service-Module.
                 These objects contain word 'Tagged' in the name.

                 For example : 'rcvFramesTaggedFECN'; This is the
                 counter where FECN is set by the Switch in
                 the frame received from the network. FECN was
                 not set in the frame from the Network.

                 The bit Set by the switch on an incoming or outgoing
                 frame is called 'tagged' in this mib."

    REVISION    "200210180000Z"
    DESCRIPTION
        "Initial version of the MIB.

        The content of this MIB was originally available
        in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
        The applicable objects from CISCO-WAN-AXIPOP-MIB
        are defined using SMIv2 in this MIB."

    ::= { ciscoWan 48 }

frChanCntGrp	OBJECT IDENTIFIER ::= { frChan 3 }

frChanCntGrpTable	OBJECT-TYPE
    SYNTAX	SEQUENCE OF FrChanCntGrpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
        "This table contains information on statistics
        for Frame Relay Connections."
    ::= { frChanCntGrp 1 }

frChanCntGrpEntry	OBJECT-TYPE
    SYNTAX	FrChanCntGrpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
        "Each entry in this table describes the
        statistical information for Frame Relay
        connections."
    INDEX	{ cntChanNum }
    ::= { frChanCntGrpTable 1}

FrChanCntGrpEntry ::=
    SEQUENCE {
        cntChanNum 	              Integer32,
	rcvFrames		      Counter32,
	rcvBytes                      Counter32,
	rcvFramesDE		      Counter32,
	rcvBytesDE		      Counter32,
	rcvFramesDiscard	      Counter32,
	rcvBytesDiscard	              Counter32,
	rcvFramesDiscShelfAlarm	      Counter32,
	rcvFramesDiscXceedQDepth      Counter32,
	rcvBytesDiscXceedQDepth       Counter32,
	rcvFramesDiscXceedDEThresh    Counter32,
	rcvFramesFECN                 Counter32,
	rcvFramesBECN                 Counter32,
	rcvFramesTaggedFECN           Counter32,
	rcvFramesTaggedBECN           Counter32,
	rcvFramesTaggedDE             Counter32,
	rcvBytesTaggedDE              Counter32,
	rcvKbpsAIR                    Integer32,
	xmtFrames	              Counter32,
	xmtBytes	              Counter32,
	xmtFramesFECN                 Counter32,
	xmtFramesBECN                 Counter32,
	xmtFramesDE	              Counter32,
	xmtBytesDE		      Counter32,
	xmtFramesDiscard	      Counter32,
	xmtBytesDiscard	              Counter32,
	xmtFramesDiscXceedQDepth      Counter32,
	xmtBytesDiscXceedQDepth       Counter32,
	xmtFramesDiscXceedDEThresh    Counter32,
	xmtFramesDiscPhyLayerFail     Counter32,
	xmtFramesDiscCRCError         Counter32,
	xmtFramesDiscReassmFail       Counter32,
	xmtFramesDiscSrcAbort         Counter32,
	xmtFramesDuringLMIAlarm       Counter32,
	xmtBytesDuringLMIAlarm        Counter32,
	xmtFramesTaggedFECN           Counter32,
	xmtFramesTaggedBECN           Counter32,
	xmtKbpsAIR                    Integer32,
	chanClrButton                 INTEGER,
        chanSecUpTime                 Counter32,
        rcvFramesDiscUPC              Counter32,
        xmtBytesTaggedDE              Counter32,
        xmtFramesTaggedDE             Counter32,
        xmtFramesInvalidCPIs          Counter32,
        xmtFramesLengthViolations     Counter32,
        xmtFramesOversizedSDUs        Counter32,
        xmtFramesUnknownProtocols     Counter32,
        rcvFramesUnknownProtocols     Counter32,
      	xmtBytesDEDiscard 	      Counter32,
	rcvBytesDEDiscard 	      Counter32
}

cntChanNum OBJECT-TYPE
    SYNTAX	Integer32(1..2147483647)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The value of this object refers to
        refers to the virtual connection/channel index.
        The value for this object must be same as the
        value of 'chanNum' from frChanCnfGrpTable."
    REFERENCE
        "chanNum object in CISCO-WAN-FR-CONN-MIB."
    ::= { frChanCntGrpEntry 1}

rcvFrames OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames Received by the network
        (ingress) for this PVC end-point."
    ::= { frChanCntGrpEntry	2 }

rcvBytes OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of bytes Received by the network
        (ingress) for this PVC end-point."
    ::= { frChanCntGrpEntry	3 }

rcvFramesDE OBJECT-TYPE
    SYNTAX	Counter32
    UNITS      "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
	"The number of frames received by the network(ingress)
        with the DE bit set to (1) for this frame relay connection."
    ::= { frChanCntGrpEntry	4 }

rcvBytesDE OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
	"The number of frames received by the network(ingress)
        with the DE bit set to (1) for this frame relay connection."
    ::= { frChanCntGrpEntry	5 }

rcvFramesDiscard OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames received by the network(ingress)
        that were discarded due to traffic enforcement
        for this frame relay connection."
    ::= { frChanCntGrpEntry	6 }

rcvBytesDiscard OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of bytes received by the network(ingress)
        that were discarded due to traffic enforcement
        for this frame relay connection."
    ::= { frChanCntGrpEntry	7 }

rcvFramesDiscShelfAlarm OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames discarded on the ingress
        due to shelf alarm

        For FRSM12 Card: Not Supported."
    ::= { frChanCntGrpEntry	8 }

rcvFramesDiscXceedQDepth OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames discarded on the ingress
        due to exceeded queue depth."
    ::= { frChanCntGrpEntry	9 }

rcvBytesDiscXceedQDepth OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of bytes discarded on the ingress
        due to exceeded queue depth."
    ::= { frChanCntGrpEntry	10 }

rcvFramesDiscXceedDEThresh OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames discarded on the ingress
        due to exceeded DE Threshold."
    ::= { frChanCntGrpEntry	11 }

rcvFramesFECN OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames received by the network(ingress)
        that have the FECN bit set for this frame relay connection."
    ::= { frChanCntGrpEntry	12 }

rcvFramesBECN OBJECT-TYPE
    SYNTAX	Counter32
    UNITS      "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames received by the network(ingress)
        that have the BECN bit set for this frame relay connection."
    ::= { frChanCntGrpEntry	13 }

rcvFramesTaggedFECN OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames received for which the
        the switch set(tagged) the FECN bit."
    ::= { frChanCntGrpEntry	14 }

rcvFramesTaggedBECN OBJECT-TYPE
    SYNTAX	Counter32
    UNITS      "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames received for which the
        switch set(tagged) the BECN bit."
    ::= { frChanCntGrpEntry	15 }

rcvFramesTaggedDE OBJECT-TYPE
    SYNTAX	Counter32
    UNITS      "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames received for which the
        switch set(tagged) the DE bit."
    ::= { frChanCntGrpEntry	16 }

rcvBytesTaggedDE OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Bytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of bytes received for which the
        switch set the DE bit."
    ::= { frChanCntGrpEntry	17 }

rcvKbpsAIR OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "kbps"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "Received Average Information Rate in KBPS."
    ::= { frChanCntGrpEntry	18 }

xmtFrames OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames sent by the network(egress)."
    ::= { frChanCntGrpEntry	19 }

xmtBytes OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Bytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of bytes sent by the network(egress)."
    ::= { frChanCntGrpEntry	20 }

xmtFramesFECN OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames sent by the network(egress)
        that have the FECN bit set for this frame relay connection."
    ::= { frChanCntGrpEntry	21 }

xmtFramesBECN OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames sent by the network(egress)
        that have the BECN bit set for this frame relay connection."
    ::= { frChanCntGrpEntry	22 }

xmtFramesDE OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames sent by the network(egress)
        with the DE bit set to (1) for this frame relay 
        connection."
    ::= { frChanCntGrpEntry	23 }

xmtBytesDE OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames sent by the network(egress)
        with the DE bit set to (1) for this frame relay 
        connection."
    ::= { frChanCntGrpEntry	24 }

xmtFramesDiscard OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames sent by the network(egress)
        that were discarded due to traffic enforcement
        for this frame relay connection."
    ::= { frChanCntGrpEntry	25 }

xmtBytesDiscard OBJECT-TYPE
    SYNTAX	Counter32
    UNITS       "Bytes"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of bytes discarded on the egress

        For FRSM12 Card: Not Supported
        "
    ::= { frChanCntGrpEntry	26 }

xmtFramesDiscXceedQDepth OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames discarded on the egress
        due to exceeded queue depth

        For FRSM12 Card: Not Supported."
    ::= { frChanCntGrpEntry	27 }

xmtBytesDiscXceedQDepth OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Bytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of bytes discarded on the egress
        due to exceeded queue depth

        For FRSM12 Card: Not Supported."
    ::= { frChanCntGrpEntry	28 }

xmtFramesDiscXceedDEThresh OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames discarded on the egress
        due to exceeded DE Threshold

        For FRSM12 Card: Not Supported
        "
    ::= { frChanCntGrpEntry	29 }

xmtFramesDiscPhyLayerFail OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames discarded on the egress
        due to physical layer failure."
    ::= { frChanCntGrpEntry	30 }

xmtFramesDiscCRCError OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames discarded on the egress
        due to CRC Error."
    ::= { frChanCntGrpEntry	31 }

xmtFramesDiscReassmFail OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames discarded on the egress
        due to reassembly failure

        For FRSM12 Card: Not Supported."
    ::= { frChanCntGrpEntry	32 }

xmtFramesDiscSrcAbort OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames discarded on the egress
        due to source abort."
    ::= { frChanCntGrpEntry	33 }

xmtFramesDuringLMIAlarm OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames transmitted during
        LMI logical port alarm
    "
    ::= { frChanCntGrpEntry	34 }

xmtBytesDuringLMIAlarm OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of bytes transmitted during
        LMI logical port alarm."
    ::= { frChanCntGrpEntry	35 }

xmtFramesTaggedFECN OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION		  
        "The number of frames transmitted for which 
        the switch set the FECN bit."
    ::= { frChanCntGrpEntry	36 }

xmtFramesTaggedBECN OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "The number of frames transmitted for which 
        the switch set the BECN bit."
    ::= { frChanCntGrpEntry	37 }

xmtKbpsAIR OBJECT-TYPE
    SYNTAX     Integer32
    UNITS      "kbps"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION		  
        "Transmitted Average Information Rate in KBPS."
    ::= { frChanCntGrpEntry	38 }

chanClrButton OBJECT-TYPE
    SYNTAX	INTEGER {
                    noaction (1),
                    clear (2)
                }
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION		  
        "Channel clear button. Clears Channel Counters."
    ::= { frChanCntGrpEntry 39 }
 
xmtFramesTaggedDE OBJECT-TYPE
   SYNTAX     Counter32
   UNITS      "Frames"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "The number of frames transmitted which have been DE tagged
       at the far end ingress in excess of CIR."
   ::= { frChanCntGrpEntry 40 }
 
xmtBytesTaggedDE OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Bytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of bytes transmitted which have been DE tagged
        at the far end ingress in excess of CIR."
    ::= { frChanCntGrpEntry 41 }
 
rcvFramesDiscUPC OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of frames discarded at ingress
        due to the UPC measurement in excess of CIR+EIR."
    ::= { frChanCntGrpEntry 42 }
 
chanSecUpTime OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The time in seconds the PVC stay in service."
    ::= { frChanCntGrpEntry 43 }
 
xmtFramesInvalidCPIs OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION   
        "Number of frames transmitted with invalid CPI header.
        currently valid is 0."
   ::= { frChanCntGrpEntry 44 }
 
xmtFramesLengthViolations OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of frames discarded due to violation 
        of length in the egress direction."
   ::= { frChanCntGrpEntry 45 }
 
xmtFramesOversizedSDUs OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of frames discarded because the size is beyond 
        the max in the egress direction."
    ::= { frChanCntGrpEntry 46 }
 
xmtFramesUnknownProtocols OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of frames discarded for Unknown protocol in
        the egress direction. Used only in SIW for PDUs that
        are dropped."
    ::= { frChanCntGrpEntry 47 }
 
rcvFramesUnknownProtocols OBJECT-TYPE
    SYNTAX     Counter32
    UNITS      "Frames"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Number of frames discarded for Unknown protocol in the 
        ingress direction. Used only in SIW for PDUs that 
        are dropped."
    ::= { frChanCntGrpEntry 48 }

xmtBytesDEDiscard OBJECT-TYPE
	SYNTAX     Counter32
        UNITS      "Bytes"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	    "Number of bytes discarded in the egress direction
	     by the channel due to exceeded DE Threshold."
	::= { frChanCntGrpEntry 49 }

rcvBytesDEDiscard OBJECT-TYPE
	SYNTAX     Counter32
        UNITS      "Bytes"
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION
	    "Number of bytes discarded in the ingress direction
	     by the channel due to exceeded DE Threshold."
	::= { frChanCntGrpEntry 50 }


-- *********************************************************************
--
-- frstdABRCounters group
-- Channel OR VC COUNTERS 
--
-- *********************************************************************

frstdABRCntGrpTable	OBJECT-TYPE
    SYNTAX	SEQUENCE OF FrstdABRCntGrpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
        "This table contains information on statistics
        for Frame Relay Connections. This is applicable
        for ABR Frame Relay connections only."
    ::= { frChanCntGrp 2 }

frstdABRCntGrpEntry	OBJECT-TYPE
    SYNTAX	FrstdABRCntGrpEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
        "Each entry in this table describes the
        statistical information for Frame Relay
        connections."
    INDEX	{ frstdABRcntChanNum }
    ::= { frstdABRCntGrpTable 1}

FrstdABRCntGrpEntry ::=
    SEQUENCE {
        frstdABRcntChanNum               Integer32,
        frChanFrmXmtToNetworkCnt         Counter32,
        frChanBrmXmtToNetworkCnt         Counter32,
        frChanCrcErrRmRcvFromNetworkCnt  Counter32,
        frChanFrmRcvFromNetworkCnt	 Counter32,
        frChanBrmRcvFromNetworkCnt       Counter32,
        frChanFrmNotTurnedAroundCnt	 Counter32
    }

frstdABRcntChanNum OBJECT-TYPE
    SYNTAX     Integer32(1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of this object refers to 
        the frame relay connection/channel index.
 
        The value for this object must be same as the value 
        of object 'chanNum' from frChanCnfGrpTable."
    REFERENCE
        "chanNum object in CISCO-WAN-FR-CONN-MIB."
    ::= { frstdABRCntGrpEntry 1}

frChanFrmXmtToNetworkCnt  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of Forward RM cells 
        transmitted to the network."
    ::= { frstdABRCntGrpEntry 2 }

frChanBrmXmtToNetworkCnt  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of Backward RM cells 
        transmitted to the network."
    ::= { frstdABRCntGrpEntry 3 }

frChanCrcErrRmRcvFromNetworkCnt   OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of RM cells received from
        the network with incorrect CRC-10."
    ::= { frstdABRCntGrpEntry 4 }

frChanFrmRcvFromNetworkCnt    OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of Forward RM cells
        received from the network."
    ::= { frstdABRCntGrpEntry 5 }

frChanBrmRcvFromNetworkCnt    OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of Backward RM cells
        received from the network."
    ::= { frstdABRCntGrpEntry 6 }

frChanFrmNotTurnedAroundCnt   OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of Forward RM cells 
        received from the network and not
        turned around."
    ::= { frstdABRCntGrpEntry 7 }


-- conformance information

cwfConnStatMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrConnStatMIB 2 }

cwfConnStatMIBGroups      OBJECT IDENTIFIER ::= { cwfConnStatMIBConformance 1 }
cwfConnStatMIBCompliances OBJECT IDENTIFIER ::= { cwfConnStatMIBConformance 2 }


-- compliance statements

ciscoWanFrConnStatCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for Frame Relay 
            Connection Statstics MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
            ciscoWanFrConnStatsGroup
        }

    GROUP ciscoWanFrConnABRStatsGroup
    DESCRIPTION
        "This group is mandatory for Frame Relay modules
        supporting ABR connections."

    GROUP ciscoWanFrConnQueueStatsGroup
    DESCRIPTION
        "This group is mandatory for Frame Relay modules
        supporting connections providing queue depth 
        and DE threshold related statistics."
    ::= { cwfConnStatMIBCompliances 1 }


ciscoWanFrConnStatsGroup OBJECT-GROUP
    OBJECTS {
        cntChanNum,
        rcvFrames,
        rcvBytes,
        rcvFramesDE,		
        rcvBytesDE,		
        rcvFramesDiscard,	
        rcvBytesDiscard,	
        rcvFramesDiscShelfAlarm	,
        rcvFramesFECN,
        rcvFramesBECN,
        rcvFramesTaggedFECN,
        rcvFramesTaggedBECN,
        rcvFramesTaggedDE,
        rcvBytesTaggedDE,
        rcvKbpsAIR,
        xmtFrames,		
        xmtBytes,	
        xmtFramesFECN,
        xmtFramesBECN,
        xmtFramesDE,		
        xmtBytesDE,		
        xmtFramesDiscard,	
        xmtBytesDiscard,	
        xmtFramesDiscPhyLayerFail,
        xmtFramesDiscCRCError,
        xmtFramesDiscReassmFail,
        xmtFramesDiscSrcAbort,
        xmtFramesDuringLMIAlarm,
        xmtBytesDuringLMIAlarm,
        xmtFramesTaggedFECN,
        xmtFramesTaggedBECN,
        xmtKbpsAIR,
        chanClrButton,
        chanSecUpTime,
        rcvFramesDiscUPC,
        xmtBytesTaggedDE,
        xmtFramesTaggedDE,
        xmtFramesInvalidCPIs,
        xmtFramesLengthViolations,
        xmtFramesOversizedSDUs,
        xmtFramesUnknownProtocols,
        rcvFramesUnknownProtocols,
        xmtBytesDEDiscard,
        rcvBytesDEDiscard
   }
   STATUS current
   DESCRIPTION 
       "The objects related to Frame Relay connection
       statistics."
    ::= { cwfConnStatMIBGroups 1 }

ciscoWanFrConnQueueStatsGroup OBJECT-GROUP
    OBJECTS {
        rcvFramesDiscXceedQDepth,
        rcvBytesDiscXceedQDepth,
        rcvFramesDiscXceedDEThresh,
        xmtFramesDiscXceedQDepth,
        xmtBytesDiscXceedQDepth,
        xmtFramesDiscXceedDEThresh
   }
   STATUS current
   DESCRIPTION 
       "The objects related to Queue depth and threshold
       related statistics for Frame Relay connections."
    ::= { cwfConnStatMIBGroups 2 }

ciscoWanFrConnABRStatsGroup OBJECT-GROUP
    OBJECTS {
        frstdABRcntChanNum,
        frChanFrmXmtToNetworkCnt,		
        frChanBrmXmtToNetworkCnt,	
        frChanCrcErrRmRcvFromNetworkCnt,
        frChanFrmRcvFromNetworkCnt,		
        frChanBrmRcvFromNetworkCnt,	
        frChanFrmNotTurnedAroundCnt	
    }
   STATUS current
   DESCRIPTION 
       "The objects related to ABR statistics on
       frame relay connections."
    ::= { cwfConnStatMIBGroups 3 }

END