CISCO-WAN-FR-PORT-MIB device MIB details by Stratacom
CISCO-WAN-FR-PORT-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-WAN-FR-PORT-MIB.
| Vendor: | Stratacom |
|---|---|
| Mib: | CISCO-WAN-FR-PORT-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- ciscoWanFrPortMIB -- -- October 2002, Subra Hegde -- -- Copyright (c) 2002 by cisco Systems, Inc. -- All rights reserved. -- **************************************************************** CISCO-WAN-FR-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF frPort, frPortCnf, frPortCnt, frPortServiceQueGrp FROM BASIS-MIB ciscoWan FROM CISCOWAN-SMI; ciscoWanFrPortMIB MODULE-IDENTITY LAST-UPDATED "200210170000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module to create/configure frame relay ports/interfaces. This module contains tables related to frame relay port states and statistics. The frame relay logical port is referred to as 'frame relay port' in this mib. Terminologies Used: Channel : Generically refers to the user access channel across which frame relay data travels. This is also referred to use logical port/interface in this MIB. Within a given T1 or E1 physical line, a channel can be one of the following, depending on how the line is configured. Unchannelized : The Entire T1/E1 line is considered a channel, where: * The T1 line operates at the speed of 1.536 Mbps and is single channel consisting of 24 T1 time slots. * The E1 line operates at the speed of 1.984 Mbps and is single channel consisting of 31 T1 time slots. Channelized: The channel is any one of the N time slots within a given line, where: * The T1 line consists of any one or more channels. Each channel is any one of 24 time slots. * The E1 line consists of one or more channels. Each channel is any one of 31 time slots. Fractional: The T1/E1 channel is one of the following groupings of consecutively or nonconsecutively assigned time slots: * N T1 time slots(N*56/64Kbps where N=1-23 T1 Time slots per FT1 channel. * N E1 time slots(N*64Kbps where N=1-30 Time slots per E1: channel. SVC : Switched Virtual Circuits. SVCs allow access through a Frame Relay Network by setting up a path to the destination endpoints only when the need arises and tearing down the path when it is no longer needed. Refer ITU Q.933 and Q.922 FECN : Forward Explicit Congestion Notification A bit set by a frame relay network to notify an interface device(DTE) that congestion avoidance procedures should be initiated by the receiving device. BECN : Backward Explicit Congestion Notification A bit set by a frame relay network to notify an interface device(DTE) that congestion avoidance procedures should be initiated by the sending device. DE : Discard Eligibility A user-bit set indicating that a frame may be discarded in preference to other frames if congestion occurs, to maintain the committed quality of service within the network. Frames with the DE bit set are considered Be(Excess Burst Size)excess data. Unchannelized Service Modules: Following Service Modules does not support channelized interfaces(i.e supports only unchannelized). FRSM-VHS : FRSM-2T3/2E3, FRSM-HS2/HS2B, FRSM-T3B/E3B For following service modules, ifTable is supported: FRSM-12. " REVISION "200210170000Z" DESCRIPTION "Initial version of the MIB. The content of this MIB was originally available in CISCO-WAN-AXIPOP-MIB defined using SMIv1. The applicable objects from CISCO-WAN-AXIPOP-MIB are defined using SMIv2 in this MIB. Also the descriptions of some of the objects have been modified." ::= { ciscoWan 44 } frPortCnfPortGrp OBJECT IDENTIFIER ::= { frPortCnf 1 } frPortStateGrp OBJECT IDENTIFIER ::= { frPort 3 } frPortCntPortGrp OBJECT IDENTIFIER ::= { frPortCnt 1 } -- ******************************************************************* -- -- LOGICAL PORT CONFIG Group -- -- ******************************************************************* frPortCnfPortGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrPortCnfPortGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used for creating/configuring Frame Relay Logical(referred to as frame relay port)Ports. Relation with ifTable: The modules in which ifTable is implemented, the creation of frame relay port in this table will cause an entry to be created in ifTable. The possible interfaces that are created in ifTable are identified by ifType = frameRelayService(44) and frForward(158). The deletion of an entry in this table causes the corresponding entry in ifTable to be deleted. " ::= { frPortCnfPortGrp 1 } frPortCnfPortGrpEntry OBJECT-TYPE SYNTAX FrPortCnfPortGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the frame relay port table." INDEX { portNum } ::= { frPortCnfPortGrpTable 1 } FrPortCnfPortGrpEntry ::= SEQUENCE { portNum Integer32, portLineNum Integer32, portRowStatus INTEGER, portDs0ConfigBitMap Integer32, portDs0Speed INTEGER, portFlagsBetweenFrames Integer32, portEqueueServiceRatio Integer32, portSpeed Integer32, portAdmin INTEGER, portType INTEGER, portSvcStatus INTEGER, portSvcInUse INTEGER, portSvcShareLcn INTEGER, portSvcLcnLow Integer32, portSvcLcnHigh Integer32, portSvcDlciLow Integer32, portSvcDlciHigh Integer32, portDeleteSvcs INTEGER, portIngrSvcBandW Integer32, portEgrSvcBandW Integer32, portBERTEnable INTEGER, portEnhancedSIW INTEGER, portM32EgrQueueThresh Integer32, portHeaderLen INTEGER, portFrameChkSumType INTEGER, portFileId Integer32, portOverSubEnable INTEGER } portNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the frame relay(logical) port number. For Service Modules, supporting ifTable, this must be the ifIndex value of the frame relay port. The port number value supported depends upon the following for each Service Module: - type(Channelized, Unchannelized, Fractional etc) of physical line and number of physical lines - Number of physical line supported - Limitations due to Service Module Hardware components. Port Number mapping is as follows: (NOTE: All the Supported Service Module information is not provided here). T1(channelized) : 24 Time Slots * Max #Lines Supported. Example: 8 Port Service Module - 1..192(24*8) E1(channelized) : 31 Time Slots * Max #Lines Supported. Example: 8 Port Service Module - 1..248(31*8) T3 Channelized : Example: 2CT3 Service Module: 1-256(Limited by hardware) Unchannelized VHS : Range is 1-2 (T3/E3/HS2/T3B/E3B/HS2B-HSSI) FRSM-HS2B-12IN1 : Range is 1-8 FRSM-12 : same as ifIndex value. With the above convention, Port Number mapping is as follows: T1 Service Module : Range is 1-192. E1 Service Module : Range is 1-248. 2CT3 Service Module : Range is 1-256 NOTE: For other Service Modules(Where ifTable is supported): This value for this object must be same as the ifIndex value for the frame relay port ifTable. The frame relay ports identified by ifType values frameRelayService(44) and frForward(158) are valid for this object. Since, Frame Relay Port table is used for creating entries in ifTable, it sounds odd to specify ifIndex value for this object, even before creating the ifTable entries!. The reason(s) for this is as follows: - There are tables in other frame relay mibs, which are indexed by auxiliary objects(objects which are both specified in the INDEX clause and columnar objects of the same row) whose value is supposed to be same as 'portNum'. These MIBs have been used earlier by NMS Applications for the other product lines(MGX8250, MGX8220 etc). - The same frame relay tables in used in other products has been decided to use in new products(for example MGX8850 with FRSM-12 Service Module). It is a requirement that ifTable must be supported in New Service Modules. If we use ifIndex value of the frame relay port (after creation) in other tables(FR Port Stats, FR R Resource Partition or FR Connection etc), and if ifIndex value is different than 'portNum', then it will break the NMS applications which have been using this MIB with the assumptions that 'portNum' and INDEXes(For example: frResPartPortNum, lmiCnfPortNum, etc) are same. To avoid this confusion, it is required that 'portNum' value must be same as 'ifIndex' of the frame relay port. " REFERENCE "CISCO-MGX8800-IF-MAPPING-MIB.my to get the ifIndex value of a port even before it appears in ifTable." ::= { frPortCnfPortGrpEntry 1} portLineNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the physical line number on which the frame relay port need to be created. For Service Modules, supporting ifTable, this must be the ifIndex value of the physical line or logical interface. The ifIndex entries in ifTable applicable to this category are identified by ifType values of ds3(30), ds1(18)." ::= { frPortCnfPortGrpEntry 2} portRowStatus OBJECT-TYPE SYNTAX INTEGER { add(1), del(2), mod(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for creating modifying or deleting frame relay ports. The possible values are : add(1) : Create frame relay port del(2) : Delete frame relay port mod(3) : Modify the frame relay port. This value is required to be set in Some Older Service Modules (FRSM-8T1/E1, FRSM-VHS, FRSM-HS2B etc) to modify the port parameters. In some service modules, when the port is successfully created(add(1)), this object is set internally to mod(3). The reason for this is, one can modify parameters of the port without requiring to go through an explicit mod(3) to modify the parameters." ::= { frPortCnfPortGrpEntry 3 } portDs0ConfigBitMap OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-write STATUS current DESCRIPTION "This respesents bit map of DS0s for a line/interface which are used to form this logical port. The Bit 0 represents DS0-1(First DS0 timeslot). This object is not applicable for unchannelized service modules. In case of unchannelized interfaces, this field carries the value of 'ffffff'h." ::= { frPortCnfPortGrpEntry 4 } portDs0Speed OBJECT-TYPE SYNTAX INTEGER { speed56k (1), speed64k (2), unUsed (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for configuring the port speed(or data rate) of Ds0 in frame relay port. speed56k(1) : set to 56k speed64k(2) : set to 64k unUsed(3) : Not applicable. This field is not applicable for unchannelized interfaces/ports. In case of unchannelized interfaces this object is set to 'unUsed' always. This object can be specified only during port creation." DEFVAL { speed64k } ::= { frPortCnfPortGrpEntry 5 } portFlagsBetweenFrames OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of flags transmitted between FR frames For FRSM12 card: Only the values 1 to 8 are supported. The mapping is as follows: MIB object value No. of HDLC flags inserted 1 1 2 2 3 4 4 8 5 16 6 32 7 64 8 128 This object can not be modified if there are any frame relay connections that are configured on the port." DEFVAL { 1 } ::= { frPortCnfPortGrpEntry 6 } portEqueueServiceRatio OBJECT-TYPE SYNTAX Integer32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of times queue 1 is serviced for every time queue 2 is serviced. The value 0 is supported only by FRSM-VHS. FRSM-VHS supports two different egress queue servicing algorithms depending on the Egress Qos Feature. if EgrQosFeature is ENABLED, Weighted Fair queueing algorithm will be used to select one queue out of 4 data queues and this object will be set to a default value of 0 in this case and this value cannot be modified by user. In case of EgrQosFeature being DISABLED, this object will be set to a default value of 1 and can be configured to user desired value. This value will be used to decide number of times High priority queue has to be serviced for every time low priority queue is serviced. For FRSM12 card: There is only one scheme of egress scheduling of COS queues within ports, which uses only two COS queues for user data. The scheduling scheme uses a pre-defined ratio to schedule these COS queues on a given port. This object will be used to decide number of times High priority queue has to be serviced for every time low priority queue is serviced." DEFVAL { 1 } ::= { frPortCnfPortGrpEntry 7 } portSpeed OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object contains the Configured speed of port." ::= { frPortCnfPortGrpEntry 8 } portAdmin OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), write-Only (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for changing the desired state of the port. up(1) : Up the port;Admin up down(2) : Down the port;Admin down For Service Modules, supporting ifTable, this is equivalent to 'ifAdminStatus' object. The write-only is not supported in these cases." ::= { frPortCnfPortGrpEntry 9 } portType OBJECT-TYPE SYNTAX INTEGER { frame-relay (1), frFUNI (2), frame-forward (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the network interface for this frame relay port. The Possible values are: frame-relay(1) : Frame Relay Service Port frFUNI (2) : Frame based UNI Port. when a frame arrives from the FUNI interface the 2 byte FUNI header is removed and frame is segmented into ATM Cells by using AAL5. frame-forward(3): Frame Forward Port. In this case 2 byte Q.922 header is not assumed or interpreted. The signaling(LMI) parameters are not applicable for these ports. Relationship with ifTable: The service modules in which ifTable is implemented following side-effects will take place. For value frame-relay(1) an ifTable entry with ifType = frameRelayService(44) will be created. For value frame-forward(3) an ifTable entry with ifType = frForward(158) will be created. This object can not be modified after the port is created." DEFVAL { frame-relay } ::= { frPortCnfPortGrpEntry 10 } portSvcStatus OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for enabling/disabling the SVC operation on a frame relay port. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 11 } portSvcInUse OBJECT-TYPE SYNTAX INTEGER { not-use (1), in-use (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for representing whether SVC is in use or not. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 12 } portSvcShareLcn OBJECT-TYPE SYNTAX INTEGER { port-based(1), card-based(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the SVC shared LCN type. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 13 } portSvcLcnLow OBJECT-TYPE SYNTAX Integer32 (16..4015) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the low end of the reserved LCN for SVC. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 14 } portSvcLcnHigh OBJECT-TYPE SYNTAX Integer32 (16..4015) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the high end of reserved LCN for SVC. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 15 } portSvcDlciLow OBJECT-TYPE SYNTAX Integer32 (0..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the low end of reserved DLCI for SVC. For FRSM12 card: Not Supported." ::= { frPortCnfPortGrpEntry 16 } portSvcDlciHigh OBJECT-TYPE SYNTAX Integer32 (0..1023) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the high end of reserved DLCI for SVC. For FRSM12 card: Not Supported." ::= { frPortCnfPortGrpEntry 17 } portDeleteSvcs OBJECT-TYPE SYNTAX INTEGER { delete (1), other (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object indicates that all the SVC connections on a given frame relay port has to be deleted. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 18 } portIngrSvcBandW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the Ingress bandwidth reserved for SVC. For FRSM12 card: Not Supported " ::= { frPortCnfPortGrpEntry 19 } portEgrSvcBandW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the Egress bandwidth reserved for SVC. For FRSM12 card: Not Supported." ::= { frPortCnfPortGrpEntry 20 } portBERTEnable OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object enables/disables the Bit Error Rate Testing (BERT) on the frame relay port. For FRSM12 card: Not Supported " DEFVAL { disable } ::= { frPortCnfPortGrpEntry 21 } portEnhancedSIW OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable enables/disables enhanced SIW feature. Enabling this permits support for SIW translation of Appletalk. This feature is supported only in the FRSM-VHS card. This object is not required in FRSM12 since Appletalk is supported by default in FRF.8.1 and FRSM12 supports FRF.8.1 " DEFVAL {disable} ::= { frPortCnfPortGrpEntry 22 } portM32EgrQueueThresh OBJECT-TYPE SYNTAX Integer32 (1..6000) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the M32 logical port Egress Queue threshold in bytes. Frames will not be queued until the number of bytes in the queue is less than the threshold. The default value is 6000. Using a very low value could under utilize the logical port. This is supported in FRSM 8t1e1 and FRSM 4t1e1 Service Modules only." DEFVAL { 6000 } ::= { frPortCnfPortGrpEntry 23 } portHeaderLen OBJECT-TYPE SYNTAX INTEGER { twoOctets (1), fourOctets (2) } UNITS "Octets" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the Q.922 address field length and DLCI length for this UNI/NNI logical port. This object can not be modified if there are any frame relay connections that are configured on the port. This object is not applicable to MGX Release 1.x. " REFERENCE "Q.922 [25]" DEFVAL { twoOctets } ::= { frPortCnfPortGrpEntry 24 } portFrameChkSumType OBJECT-TYPE SYNTAX INTEGER { crc16(1), crc32(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the CRC Length in the HDLC Packet. Applicable for FrameForwarding ports only. This object can not be modified if there are any frame relay connections that are configured on the port. This object is not applicable to MGX Release 1.x. " DEFVAL { crc16 } ::= { frPortCnfPortGrpEntry 25 } portFileId OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object identifies the Service Class Template(SCT) file ID. The SCT holds the module specific configuration parameters for the frame relay port. This object is not applicable to MGX Release 1.x." DEFVAL { 0 } ::= { frPortCnfPortGrpEntry 26 } portOverSubEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The value of this object enables/disables the port to be over subscribed. This object is not applicable to MGX Release 1.x. " DEFVAL { disable } ::= { frPortCnfPortGrpEntry 27 } -- PORT usage scalars -- These scalars are not used in FRSM-VHS and FRSM12 portsUsedLine1 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1. This is for line." ::= { frPortCnfPortGrp 2 } portsUsedLine2 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1, the most significant byte is invalid for DS1. This is for line 2." ::= { frPortCnfPortGrp 3 } portsUsedLine3 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1. The most significant byte is invalid for DS1. This is for line 3." ::= { frPortCnfPortGrp 4 } portsUsedLine4 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1. The most significant byte is invalid for DS1. This is for line 4." ::= { frPortCnfPortGrp 5 } portsUsedLine5 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1. The most significant byte is invalid for DS1. This is for line 5." ::= { frPortCnfPortGrp 7 } portsUsedLine6 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1. The most significant byte is invalid for DS1. This is for line 6." ::= { frPortCnfPortGrp 8 } portsUsedLine7 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1. The most significant byte is invalid for DS1. This is for line 7." ::= { frPortCnfPortGrp 9 } portsUsedLine8 OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Each bits set represents a DS0 that is used by all the logical ports defined so far for that DS1. The most significant byte is invalid for DS1. This is for line 8." ::= { frPortCnfPortGrp 10 } -- -- Next available port -- portNextAvailable OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "This variable contains the next UNUSED logical port number. This number can be used in channel config table, the portNextAvailable gets updated if the number gets used to create a logical port. A '0' indicates that no more ports are available. For FRSM12 Card: Not Supported " ::= { frPortCnfPortGrp 6 } -- ------------------------------------------------------------------------ -- -- Group frChannelState -- Contains status information for channels -- -- ------------------------------------------------------------------------ frPortStateGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrPortStateGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of transmit/receive states of ports. " ::= { frPortStateGrp 1 } frPortStateGrpEntry OBJECT-TYPE SYNTAX FrPortStateGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for logical port. " INDEX { statePortNum } ::= { frPortStateGrpTable 1 } FrPortStateGrpEntry ::= SEQUENCE { statePortNum Integer32, portState INTEGER, portSignallingState Integer32, portOversubscribed INTEGER, portIngrPercentUtil Integer32, portEgrPercentUtil Integer32 } statePortNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the frame relay(logical) port number. The value of this object must match with the value of object 'portNum' in frPortCnfPortGrpTable." ::= { frPortStateGrpEntry 1} portState OBJECT-TYPE SYNTAX INTEGER { notConfigured (1), active (2), remoteLoopback (3), failedDueToLine (4), failedDueToSignalling (5), inactive (6), inBert (7), farEndRemoteLoopback (8), latchDS0DropFeLoop (9), latchDS0LineFeLoop (10), latchOcuFeLoop (11), latchCsuFeLoop (12), latchDsuFeLoop (13), latchHL96FeLoop (14), v54PolynomialFeLoop (15) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the state of the logical port " ::= { frPortStateGrpEntry 2} portSignallingState OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit 0 = 0 -> LMI O.K. or not enabled Bit 0 = 1 -> LMI failed Bit 1 = 0 -> CLLM O.K. or not enabled Bit 1 = 1 -> CLLM failed " ::= { frPortStateGrpEntry 3} portOversubscribed OBJECT-TYPE SYNTAX INTEGER { false (1), true (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the whether the port is over subscribed or not." ::= { frPortStateGrpEntry 4} portIngrPercentUtil OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage Utilization of the Port in the Ingress direction." ::= { frPortStateGrpEntry 5} portEgrPercentUtil OBJECT-TYPE SYNTAX Integer32 (0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage Utilization of the Port in the Egress direction." ::= { frPortStateGrpEntry 6} -- ------------------------------------------------------------------------ -- -- frPortCounters group -- Channel OR VC COUNTERS -- -- ------------------------------------------------------------------------ frPortCntPortGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrPortCntPortGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The config table is for logical port interface there are upto 248 entries (for 8 E1s) or 192 (for 8 T1s). In FRSM-VHS, there is support for upto 256 entries. " ::= { frPortCntPortGrp 1 } frPortCntPortGrpEntry OBJECT-TYPE SYNTAX FrPortCntPortGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry for logical port " INDEX { cntPortNum } ::= { frPortCntPortGrpTable 1} FrPortCntPortGrpEntry ::= SEQUENCE { cntPortNum Integer32, -- Rcv Counters rcvPortFrames Counter32, rcvPortBytes Counter32, rcvPortFramesDE Counter32, rcvPortFramesFECN Counter32, rcvPortFramesBECN Counter32, -- Discarded due to rcvFramesDiscCRCError Counter32, rcvFramesDiscAlignmentError Counter32, rcvFramesDiscIllegalLen Counter32, rcvFramesDiscIllegalHeader Counter32, rcvFramesAbort Counter32, rcvFramesUnknownDLCI Counter32, rcvLastUnknownDLCI Integer32, -- Rcv Congestion rcvPortFramesTaggedFECN Counter32, rcvPortFramesTaggedBECN Counter32, rcvPortFramesTaggedDE Counter32, rcvPortFramesDiscXceedDEThresh Counter32, rcvPortKbpsAIR Integer32, rcvBufNotAvailable Counter32, -- Xmt Counters xmtPortFrames Counter32, xmtPortBytes Counter32, xmtPortFramesFECN Counter32, xmtPortFramesBECN Counter32, xmtPortFramesDiscXceedQDepth Counter32, xmtPortBytesDiscXceedQDepth Counter32, xmtPortFramesDuringLMIAlarm Counter32, xmtPortBytesDuringLMIAlarm Counter32, xmtFramesAbort Counter32, xmtFramesUnderrun Counter32, xmtPortKbpsAIR Integer32, xmtBufNotAvailable Counter32, portClrButton INTEGER, rcvFramesDiscNoChan Counter32, rcvFramesDiscOverrun Counter32, rcvPortFramesDiscard Counter32, xmtPortFramesDE Counter32, xmtPortBytesDE Counter32, rcvPortBytesDE Counter32, xmtPortFramesDiscXceedDEThresh Counter32, xmtPortBytesDiscXceedDEThresh Counter32, rcvPortBytesDiscXceedDEThresh Counter32 } cntPortNum OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the frame relay(logical) port number. The value of this object must be same as the value of object 'portNum' in frPortCnfPortGrpTable." ::= { frPortCntPortGrpEntry 1} rcvPortFrames OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames Received on the ingress." ::= { frPortCntPortGrpEntry 2 } rcvPortBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes Received on the ingress." ::= { frPortCntPortGrpEntry 3 } rcvPortFramesDE OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames with DE bit set received on the ingress." ::= { frPortCntPortGrpEntry 4 } rcvPortFramesFECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames with FECN bit set received on the ingress." ::= { frPortCntPortGrpEntry 5 } rcvPortFramesBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames with BECN bit set received on the ingress." ::= { frPortCntPortGrpEntry 6 } rcvFramesDiscCRCError OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to CRC error." ::= { frPortCntPortGrpEntry 7 } rcvFramesDiscAlignmentError OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to Alignment error." ::= { frPortCntPortGrpEntry 8 } rcvFramesDiscIllegalLen OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to illegal length." ::= { frPortCntPortGrpEntry 9 } rcvFramesDiscIllegalHeader OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to illegal header." ::= { frPortCntPortGrpEntry 10 } rcvFramesAbort OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received frames aborted " ::= { frPortCntPortGrpEntry 11 } rcvFramesUnknownDLCI OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received with an unknown DLCI." ::= { frPortCntPortGrpEntry 12 } rcvLastUnknownDLCI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last unknown DLCI received." ::= { frPortCntPortGrpEntry 13 } rcvPortFramesTaggedFECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that were tagged with FECN bit." ::= { frPortCntPortGrpEntry 14 } rcvPortFramesTaggedBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that were tagged with BECN bit." ::= { frPortCntPortGrpEntry 15 } rcvPortFramesTaggedDE OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received that were tagged with DE bit." ::= { frPortCntPortGrpEntry 16 } rcvPortFramesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the ingress due to exceeded DE Threshold." ::= { frPortCntPortGrpEntry 17 } rcvPortKbpsAIR OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Received Average Information Rate in KBPS." ::= { frPortCntPortGrpEntry 18 } rcvBufNotAvailable OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the receiver is turned off " ::= { frPortCntPortGrpEntry 19 } xmtPortFrames OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted." ::= { frPortCntPortGrpEntry 20 } xmtPortBytes OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted." ::= { frPortCntPortGrpEntry 21 } xmtPortFramesFECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted with FECN bit already set." ::= { frPortCntPortGrpEntry 22 } xmtPortFramesBECN OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted with BECN bit already set." ::= { frPortCntPortGrpEntry 23 } xmtPortFramesDiscXceedQDepth OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded on the egress due to exceeded queue depth For FRSM12 Card: Not Supported " ::= { frPortCntPortGrpEntry 24 } xmtPortBytesDiscXceedQDepth OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes discarded on the egress due to exceeded queue depth For FRSM12 Card: Not Supported " ::= { frPortCntPortGrpEntry 25 } xmtPortFramesDuringLMIAlarm OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted during LMI logical port alarm " ::= { frPortCntPortGrpEntry 26 } xmtPortBytesDuringLMIAlarm OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted during LMI logical port alarm " ::= { frPortCntPortGrpEntry 27 } xmtFramesAbort OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmit frames aborted For FRSM12 Card: Not Supported " ::= { frPortCntPortGrpEntry 28 } xmtFramesUnderrun OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames discarded due to underrun." ::= { frPortCntPortGrpEntry 29 } xmtPortKbpsAIR OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Average Information Rate in KBPS." ::= { frPortCntPortGrpEntry 30 } xmtBufNotAvailable OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the transmitter is turned off For FRSM12 Card: Not Supported " ::= { frPortCntPortGrpEntry 31 } portClrButton OBJECT-TYPE SYNTAX INTEGER { noaction (1), clear (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object is used for clearing all the port related statistics counters. clear(2) : Clears the Counters. noaction(1) : No action taken." ::= { frPortCntPortGrpEntry 32 } rcvFramesDiscNoChan OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received when no channel is setup." ::= { frPortCntPortGrpEntry 33 } rcvFramesDiscOverrun OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION " The number of frames discarded in Ingress direction due to FIFO overrun in HDLC Controller. This object is not applicable to MGX Release 1.x " ::= { frPortCntPortGrpEntry 34 } rcvPortFramesDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of framesdiscarded in the ingress direction by the port " ::= { frPortCntPortGrpEntry 35 } xmtPortFramesDE OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of frames transmitted in the egress direction by the port with DE bit set to 1 " ::= { frPortCntPortGrpEntry 36 } xmtPortBytesDE OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of bytes transmitted in the egress direction by the port with DE bit set to 1 " ::= { frPortCntPortGrpEntry 37 } rcvPortBytesDE OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of bytes received in the ingress direction by the port with DE bit set to 1 " ::= { frPortCntPortGrpEntry 38 } xmtPortFramesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of frames discarded in the egress direction by the port due to exceeded DE Threshold " ::= { frPortCntPortGrpEntry 39 } xmtPortBytesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of bytes discarded in the egress direction by the port due to exceeded DE Threshold " ::= { frPortCntPortGrpEntry 40 } rcvPortBytesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Number of bytes discarded in the ingress direction by the port due to exceeded DE Threshold " ::= { frPortCntPortGrpEntry 41 } -- Pors Usage table specific to FRSM VHS Card. frPortsUsedLineGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrPortsUsedLineGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table Contains information on the DS0 time slots used in each DS1 interface." ::= { frPortCnfPortGrp 11 } frPortsUsedLineGrpEntry OBJECT-TYPE SYNTAX FrPortsUsedLineGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for each DS1 interface." INDEX { frPortsUsedLineIndex } ::= { frPortsUsedLineGrpTable 1 } FrPortsUsedLineGrpEntry ::= SEQUENCE { frPortsUsedLineIndex Integer32, frPortsUsedLine Integer32 } frPortsUsedLineIndex OBJECT-TYPE SYNTAX Integer32(1..56) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the DS1 interface." ::= { frPortsUsedLineGrpEntry 1 } frPortsUsedLine OBJECT-TYPE SYNTAX Integer32 (0..'ffffff'h) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object provides the information on DS0 time slots used by the DS1 identified by 'frPortsUsedLineIndex' object. A bit set represents a DS0 that is used by all the logical ports defined so far for DS1 interface. The most significant byte is invalid for DS1." ::= { frPortsUsedLineGrpEntry 2 } -- -------------------------------------------------------------------- -- -- -- LOGICAL PORT CONFIG Group -- -- -- -------------------------------------------------------------------- frPortServiceQueGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF FrPortServiceQueGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The config table is for logical port interface. In FRSM-VHS, there are 256 entries for FRSM-2CT3 card and 2 entries for FRSM-T3/E3/HS2/T3B/E3B/HS2B-HSSI cards and 8 entries for FRSM-HS2B-12IN1. The table is supported only in FRSM-VHS when the object egrQosFeature in the cardSpecific group is set to egrQosFeatureEnabled. " ::= { frPortServiceQueGrp 1 } frPortServiceQueGrpEntry OBJECT-TYPE SYNTAX FrPortServiceQueGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry for logical port." INDEX {frServPortNum, portServiceQueueNo } ::= { frPortServiceQueGrpTable 1 } FrPortServiceQueGrpEntry ::= SEQUENCE { frServPortNum Integer32, portServiceQueueNo INTEGER, portEgresQDepth Integer32, portEgresECNThresh Integer32, portEgresDEThresh Integer32, portQBwInc Integer32, portBytesDiscXceedQueFull Counter32, portBytesDiscXceedDEThresh Counter32 } frServPortNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the frame relay port number. The value of this object must match with the value of object 'portNum' in frPortCnfPortGrpTable." ::= { frPortServiceQueGrpEntry 1} portServiceQueueNo OBJECT-TYPE SYNTAX INTEGER{ highpriorityQ (1), rtVBRQ (2), nrtVBRandABRQ (3), uBRQ (4), queue5 (5), queue6 (6), queue7 (7), queue8 (8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This identifies the Q depending on the Service Type 1 High Priority Queue 2 rt VBR Queue 3 nrt VBR and ABR Queue 4 UBR Queue queue5(5) to queue8(8) are reserved for future use There are 8 queues but only four are being used as of now. " ::= { frPortServiceQueGrpEntry 2 } portEgresQDepth OBJECT-TYPE SYNTAX Integer32(0..2097151) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the peak Egress queue depth for the frame relay port. The total queue depth of all connections mapped to this queue should not exceed this value." DEFVAL {1048575} ::= { frPortServiceQueGrpEntry 3 } portEgresECNThresh OBJECT-TYPE SYNTAX Integer32(0..2097151) MAX-ACCESS read-write STATUS current DESCRIPTION "ECN threshold for the frame relay port. If the total queue depth of all connections mapped to this port queue exceeds this threshold, then the appropriate ECN bit (FECN in the downstream direction and BECN in the upstream direction) get set." DEFVAL {104857} ::= { frPortServiceQueGrpEntry 4 } portEgresDEThresh OBJECT-TYPE SYNTAX Integer32(0..2097151) MAX-ACCESS read-write STATUS current DESCRIPTION "DE threshold for the frame relay port. If the total queue depth of all connections mapped to this port queue exceeds this threshold, and the DE bit is set in the incoming frame, then the frame gets dropped." DEFVAL {524287} ::= { frPortServiceQueGrpEntry 5 } portQBwInc OBJECT-TYPE SYNTAX Integer32(0..16383) MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the bandwidth increment for this port queue. The bandwidth increment is the percentage of the port bandwidth used by all connections mapped to a particular queue scaled by the value 16384." ::= { frPortServiceQueGrpEntry 6 } portBytesDiscXceedQueFull OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Counter maintained for the no of bytes discarded due to port queue depth exceeded." ::= { frPortServiceQueGrpEntry 7 } portBytesDiscXceedDEThresh OBJECT-TYPE SYNTAX Counter32 UNITS "Bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Counter maintained for the no of bytes discarded due to DE threshold exceeded." ::= { frPortServiceQueGrpEntry 8 } -- conformance information ciscoWanFrPortMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrPortMIB 2 } ciscoWanFrPortMIBGroups OBJECT IDENTIFIER ::= { ciscoWanFrPortMIBConformance 1 } ciscoWanFrPortMIBCompliances OBJECT IDENTIFIER ::= { ciscoWanFrPortMIBConformance 2 } -- compliance statements ciscoWanFrPortCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for objects related to Frame Relay Ports." MODULE -- this module MANDATORY-GROUPS { ciscoWanFrPortConfGroup, ciscoWanFrPortStateGroup, ciscoWanFrPortStatsGroup } GROUP ciscoWanFrPortSvcGroup DESCRIPTION "This group is current for those frame relay interfaces where SVC is supported." GROUP ciscoWanFrPortDs0InDs1Group DESCRIPTION "This group is mandatory for those frame relay interfaces where DS0 time slots are supported in a DS1 interface." GROUP ciscoWanFrPortsUsedGroup DESCRIPTION "This group is mandatory for those frame relay interfaces where DS0 time slot information is supported." GROUP ciscoWanFrPortServiceQueueGroup DESCRIPTION "This group is mandatory for those frame relay interfaces where Service Queue is supported." ::= { ciscoWanFrPortMIBCompliances 1 } ciscoWanFrPortConfGroup OBJECT-GROUP OBJECTS { portNum, portLineNum, portRowStatus, portDs0ConfigBitMap, portDs0Speed, portFlagsBetweenFrames, portEqueueServiceRatio, portSpeed, portAdmin, portType, portBERTEnable, portEnhancedSIW, portM32EgrQueueThresh, portHeaderLen, portFrameChkSumType, portFileId, portOverSubEnable } STATUS current DESCRIPTION "The collection of objects which are used to represent Frame Relay Port information." ::= { ciscoWanFrPortMIBGroups 1 } ciscoWanFrPortSvcGroup OBJECT-GROUP OBJECTS { portSvcStatus, portSvcInUse, portSvcShareLcn, portSvcLcnLow, portSvcLcnHigh, portSvcDlciLow, portSvcDlciHigh, portDeleteSvcs, portIngrSvcBandW, portEgrSvcBandW } STATUS current DESCRIPTION "The collection of objects which are used to represent SVC characteristics of a Frame Relay Port." ::= { ciscoWanFrPortMIBGroups 2 } ciscoWanFrPortDs0InDs1Group OBJECT-GROUP OBJECTS { portsUsedLine1, portsUsedLine2, portsUsedLine3, portsUsedLine4, portsUsedLine5, portsUsedLine6, portsUsedLine7, portsUsedLine8, portNextAvailable } STATUS current DESCRIPTION "The objects representing the DS0(in DS1) that are used by the frame relay logical ports." ::= { ciscoWanFrPortMIBGroups 3 } ciscoWanFrPortStateGroup OBJECT-GROUP OBJECTS { statePortNum, portState, portSignallingState, portOversubscribed, portIngrPercentUtil, portEgrPercentUtil } STATUS current DESCRIPTION "The collection of objects related to state information of Frame Relay Ports." ::= { ciscoWanFrPortMIBGroups 4 } ciscoWanFrPortStatsGroup OBJECT-GROUP OBJECTS { cntPortNum, rcvPortFrames, rcvPortBytes, rcvPortFramesDE, rcvPortFramesFECN, rcvPortFramesBECN, rcvFramesDiscCRCError, rcvFramesDiscAlignmentError, rcvFramesDiscIllegalLen, rcvFramesDiscIllegalHeader, rcvFramesAbort, rcvFramesUnknownDLCI, rcvLastUnknownDLCI, rcvPortFramesTaggedFECN, rcvPortFramesTaggedBECN, rcvPortFramesTaggedDE, rcvPortFramesDiscXceedDEThresh, rcvPortKbpsAIR, rcvBufNotAvailable, xmtPortFrames, xmtPortBytes, xmtPortFramesFECN, xmtPortFramesBECN, xmtPortFramesDiscXceedQDepth, xmtPortBytesDiscXceedQDepth, xmtPortFramesDuringLMIAlarm, xmtPortBytesDuringLMIAlarm, xmtFramesAbort, xmtFramesUnderrun, xmtPortKbpsAIR, xmtBufNotAvailable, portClrButton, rcvFramesDiscNoChan, rcvFramesDiscOverrun, rcvPortFramesDiscard, xmtPortFramesDE, xmtPortBytesDE, rcvPortBytesDE, xmtPortFramesDiscXceedDEThresh, xmtPortBytesDiscXceedDEThresh, rcvPortBytesDiscXceedDEThresh } STATUS current DESCRIPTION "The collection of objects related to statistics information of frame relay ports." ::= { ciscoWanFrPortMIBGroups 5 } ciscoWanFrPortServiceQueueGroup OBJECT-GROUP OBJECTS { frServPortNum, portServiceQueueNo, portEgresQDepth, portEgresECNThresh, portEgresDEThresh, portQBwInc, portBytesDiscXceedQueFull, portBytesDiscXceedDEThresh } STATUS current DESCRIPTION "The collection of objects related to service queue on frame relay ports." ::= { ciscoWanFrPortMIBGroups 6 } ciscoWanFrPortsUsedGroup OBJECT-GROUP OBJECTS { frPortsUsedLineIndex, frPortsUsedLine } STATUS current DESCRIPTION "The collection of objects related to information on DS0 time slots used in each DS1 line." ::= { ciscoWanFrPortMIBGroups 7 } END