CISCO-WAN-SONET-MIB device MIB details by Stratacom

CISCO-WAN-SONET-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-WAN-SONET-MIB.

Vendor:	Stratacom
Mib:	CISCO-WAN-SONET-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ciscoWanSONET MIB
--
-- May 2002, Subra Hegde 
--
-- Copyright (c) 1999,2000,2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
                

CISCO-WAN-SONET-MIB DEFINITIONS ::= BEGIN
IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,Unsigned32      FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP                FROM SNMPv2-CONF
    ifIndex                     FROM IF-MIB 
    PerfIntervalCount           FROM PerfHist-TC-MIB
    ciscoWan                    FROM CISCOWAN-SMI;

ciscoWANSonetMIB MODULE-IDENTITY
        LAST-UPDATED        "200205200000Z"
        ORGANIZATION        "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
        DESCRIPTION
                "The MIB module to describe SONET/SDH interfaces objects. 
                 This is an extension to the standard SONET MIB(RFC 2558)."

        REVISION        "200205200000Z"
        DESCRIPTION     "Importing Unsigned32 from SNMPv2-SMI."

        REVISION "200003060000Z"
        DESCRIPTION
            "Initial version of the MIB Module."
        ::= { ciscoWan 3 }



ciscoWANSonetMIBObjects      OBJECT IDENTIFIER ::= { ciscoWANSonetMIB 1}

 
-- sonet section 
cwsSection         OBJECT IDENTIFIER ::= { ciscoWANSonetMIBObjects 1}
-- sonet line 
cwsLine            OBJECT IDENTIFIER ::= { ciscoWANSonetMIBObjects 2}
-- sonet path
cwsPath            OBJECT IDENTIFIER ::= { ciscoWANSonetMIBObjects 3}

-- ----------------------------------------------------------------
--
-- Sonet Section Alarm table
--
-- ----------------------------------------------------------------
 

cwsSectionAlarmTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CwsSectionAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
                "The SONET/SDH Section Alarm table. This table contains objects
                for setting alarm thresholds and reading alarm severity.  "
        ::= { cwsSection 1 }

cwsSectionAlarmEntry OBJECT-TYPE
    SYNTAX  CwsSectionAlarmEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the alarm table. The entries exist for active sonet
         lines, with default threshold values. Thresholds may be configured for
         errored seconds(ES), severely errored seconds(SES), severely 
         errored  framing seconds(SEFS) and coding violations(CV) for
         section layer sonet lines.
         Once these thresholds are exceeded, minor or major alarm is
         raised.
         Please refer RFC1595 for descriptions  of ES,SES,SEFS,CV"
    INDEX   { ifIndex }
    ::=     { cwsSectionAlarmTable 1 }


CwsSectionAlarmEntry ::=
        SEQUENCE {
                cwsSectionStatisticalAlarmSeverity     INTEGER,
                cwsSectionCurrentESsThreshold           Unsigned32,
                cwsSectionTotalESsThreshold             Unsigned32,
                cwsSectionCurrentSESsThreshold          Unsigned32,
                cwsSectionTotalSESsThreshold            Unsigned32,
                cwsSectionCurrentSEFSsThreshold         Unsigned32,
                cwsSectionTotalSEFSsThreshold           Unsigned32,
                cwsSectionCurrentCVsThreshold           Unsigned32,
                cwsSectionTotalCVsThreshold             Unsigned32,
                cwsSectionStatAlarmStatus               Unsigned32 
        }

cwsSectionStatisticalAlarmSeverity OBJECT-TYPE
        SYNTAX  INTEGER {
                minor(1),
                major(2),
                none(3)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
         "By setting this object to major or minor, a minor or major 
          severity alarm is raised when any statistical threshold
          is exceeded. By default TCA crossing does not raise any alarm." 
    DEFVAL { none }
        ::= { cwsSectionAlarmEntry 1 }

cwsSectionCurrentESsThreshold OBJECT-TYPE
        SYNTAX  Unsigned32 (0..2147483647)
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the threshold for errored seconds(ES), 
             for the current 15-min interval, above which alarm is generated. "
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        DEFVAL {20}
        ::= { cwsSectionAlarmEntry 2 }

cwsSectionTotalESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the threshold for errored seconds(ES),
         for the 24 hour interval, above which alarm is generated. "
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        DEFVAL {20}
        ::= { cwsSectionAlarmEntry 3 }

cwsSectionCurrentSESsThreshold OBJECT-TYPE
        SYNTAX  Unsigned32 (0..2147483647)            
        UNITS "severely errored seconds"
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the threshold for severely errored
             seconds(SES) for the current 15-min interval,
         above which alarm is generated."
    REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        DEFVAL {3}
        ::= { cwsSectionAlarmEntry 4 }

cwsSectionTotalSESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    UNITS "severely errored seconds"
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "This object indicates the threshold for severely errored
         seconds(SES) for the 24 hour interval,
         above which alarm is generated."
    REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsSectionAlarmEntry 5 }

cwsSectionCurrentSEFSsThreshold OBJECT-TYPE
        SYNTAX  Unsigned32 (0..2147483647)
        UNITS "severely errored framing seconds"
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
                "This object indicates the threshold for severely errored
                 framing seconds(SEFS), above which alarm is generated."
        REFERENCE
                " RFC2558 Section 3.5, GR-253-CORE "
        DEFVAL {3}
        ::= { cwsSectionAlarmEntry 6 }

cwsSectionTotalSEFSsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    UNITS "severely errored framing seconds"
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
            "This object indicates the threshold for severely errored
         framing seconds(SEFS) for the 24 hour interval,
         above which alarm is generated."
        REFERENCE
            " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsSectionAlarmEntry 7 }

cwsSectionCurrentCVsThreshold OBJECT-TYPE
        SYNTAX  Unsigned32 (0..2147483647)
        UNITS "coding violations"
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "This object indicates the threshold for coding violations(CV),
        above which alarm is generated."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        DEFVAL {25}
    ::= { cwsSectionAlarmEntry 8 }
 
cwsSectionTotalCVsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    UNITS "coding violations"
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This object indicates the threshold for coding violations(CV)
        for 24 hour interval, above which alarm is generated."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {25}
    ::= { cwsSectionAlarmEntry 9 }
 
cwsSectionStatAlarmStatus OBJECT-TYPE
        SYNTAX  Unsigned32 (1..511)    
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
         "This variable indicates the status of the interface.
         When an alarm is raised, this would indicate which threshold 
         was exceeded. This object is updated every 15-minutes.
         Once the current 15-min window has passed, 
         and there are no errors in the current 15-min window, the 
         object is cleared from the lower level sonet task.
         The cwsSectionStatAlarmStatus is a bit map represented
         as a sum, therefore, it can represent multiple defects
         simultaneously.
         If none of the bits are set, it indicates no defect.
         The various bit positions are:
                  1     sonetSectionTotalESs
                  2     sonetSectionTotalSESs
                  3     sonetSectionTotalSEFSs
                  4     sonetSectionTotalCVs
                  5     sonetSectionCurrentESs
                  6     sonetSectionCurrentSESs
                  7     sonetSectionCurrentSEFSs
                  8     sonetSectionCurrentCVs"
        ::= { cwsSectionAlarmEntry 10 }

--
--
-- Sonet Section Current 24 hour period table
--
--

cwsSectionCurrent24HrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF CwsSectionCurrent24HrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "Contains sonet section related current 24 hour counters.
         A 24 hour interval starts at twelve midnight with 
         reference to node time. In case of a manual change 
         in node time all the counters in cwsSectionCurrent24HrTable 
         table get reset to 0."
    ::= { cwsSection 2 }

cwsSectionCurrent24HrEntry OBJECT-TYPE
    SYNTAX  CwsSectionCurrent24HrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the current 24 hour table. The entries exist for
         active sonet lines."
    INDEX   { ifIndex }
    ::=     { cwsSectionCurrent24HrTable 1 }

CwsSectionCurrent24HrEntry ::=
    SEQUENCE {
          cwsSectionCurrent24HrESs        PerfIntervalCount,
          cwsSectionCurrent24HrSESs       PerfIntervalCount,
          cwsSectionCurrent24HrSEFSs      PerfIntervalCount,
          cwsSectionCurrent24HrCVs        PerfIntervalCount
    }

cwsSectionCurrent24HrESs OBJECT-TYPE
    SYNTAX  PerfIntervalCount
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of errored seconds encountered in current 24 hour interval."
    REFERENCE
        " RFC2558 Section 3.5, GR-253-CORE"
    ::= { cwsSectionCurrent24HrEntry 1 }

cwsSectionCurrent24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SESs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsSectionCurrent24HrEntry 2 }

cwsSectionCurrent24HrSEFSs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored framing seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SEFSs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsSectionCurrent24HrEntry 3 }

cwsSectionCurrent24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of CVs encountered in current 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsSectionCurrent24HrEntry 4 }

--
--
-- Sonet Section Previous 24 hour period table
--
--

cwsSectionPrevious24HrTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CwsSectionPrevious24HrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Contains sonet section previous 24 hour counters.
            A 24 hour interval starts at twelve midnight with 
            reference to node time. In case of a manual change 
            in node time all the counters in cwsSectionPrevious24HrTable 
            table get reset to 0."
        ::= { cwsSection 3 }

cwsSectionPrevious24HrEntry OBJECT-TYPE
    SYNTAX  CwsSectionPrevious24HrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the current 24 hour table. The entries exist for
         active sonet lines."
    INDEX   { ifIndex }
    ::=     { cwsSectionPrevious24HrTable 1 }

CwsSectionPrevious24HrEntry ::=
        SEQUENCE {
                cwsSectionPrevious24HrESs               PerfIntervalCount,
                cwsSectionPrevious24HrSESs              PerfIntervalCount,
                cwsSectionPrevious24HrSEFSs             PerfIntervalCount,
                cwsSectionPrevious24HrCVs               PerfIntervalCount
        }

cwsSectionPrevious24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of errored seconds encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsSectionPrevious24HrEntry 1 }

cwsSectionPrevious24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SESs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsSectionPrevious24HrEntry 2 }

cwsSectionPrevious24HrSEFSs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored framing seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SEFSs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5,GR-253-CORE"
        ::= { cwsSectionPrevious24HrEntry 3 }

cwsSectionPrevious24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of CVs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsSectionPrevious24HrEntry 4 }

-- ----------------------------------------------------------------
--
-- Line Alarm Table 
--
-- ----------------------------------------------------------------
 
-- SONET/SDH Line Alarm  Table.
-- Changing any threshold will effect both the Near End and
-- Far End threshold.
 
cwsLineAlarmTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF CwsLineAlarmEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
      "The SONET/SDH Line Alarm table. This table contains objects which are
       thresholds that the user can set. Once the threshold is exceeded,
       an alarm is flagged.Changing any threshold will affect  both 
       the Near End and Far End(remote end of the line) threshold."
    ::= { cwsLine 1 }

cwsLineAlarmEntry OBJECT-TYPE
    SYNTAX  CwsLineAlarmEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the SONET/SDH Line Alarm table.
         The entries may be created for an
         ifType value of sonet(39). Thresholds maybe specified for
         errored seconds(ES), severely errored seconds(SES), severely
         errored  framing seconds(SEFS),coding violations(CV) and
         unavailable seconds (UAS) for line layer of sonet lines.
         Once these thresholds are exceeded, minor or major alarm is
         raised.
         Please refer RFC1595 for descriptions  of ES,SES,CV,UAS"
    INDEX   { ifIndex }
    ::= { cwsLineAlarmTable 1 }

CwsLineAlarmEntry ::=
    SEQUENCE {
                     cwsLineStatisticalAlarmSeverity     INTEGER,
                     cwsLineCurrentESsThreshold          Unsigned32,
                     cwsLineTotalESsThreshold            Unsigned32,
                     cwsLineCurrentSESsThreshold         Unsigned32,
                     cwsLineTotalSESsThreshold           Unsigned32,
                     cwsLineCurrentCVsThreshold          Unsigned32,
                     cwsLineTotalCVsThreshold            Unsigned32,
                     cwsLineCurrentUASsThreshold         Unsigned32,
                     cwsLineTotalUASsThreshold           Unsigned32,
                     cwsLineStatAlarmStatus              Unsigned32 
             }

cwsLineStatisticalAlarmSeverity OBJECT-TYPE
    SYNTAX  INTEGER {
                      minor(1),
                      major(2),
                      none(3)
                    }
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
         "By setting this object to major or minor, a minor or major 
          severity alarm is raised when any statistical threshold
          is exceeded. By default TCA crossing does not raise any alarm." 
    DEFVAL { none }
    ::= { cwsLineAlarmEntry 1 }

cwsLineCurrentESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
         "This object indicates the threshold for errored seconds(ES)
          for the current 15-min interval, above which alarm is 
          generated.
          This threshold is the same for Far End and Near End. "
    REFERENCE
         " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {20}
    ::= { cwsLineAlarmEntry 2 }

cwsLineTotalESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
         "This object indicates the threshold for errored seconds(ES)
          for the 24 hour interval, above which alarm is generated.  
          This threshold is the same for Far End and Near End. "
    REFERENCE
         " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {20}
    ::= { cwsLineAlarmEntry 3 }
 
cwsLineCurrentSESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the severely errored seconds(SES) threshold
        for the current 15-min interval, 
        above which alarm is generated.
            This threshold is the same for Far End and Near End."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsLineAlarmEntry 4 }

cwsLineTotalSESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the severely errored seconds(SES) threshold
        for the 24 hour interval, above which alarm is generated.
        This threshold is the same for Far End and Near End."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsLineAlarmEntry 5 }

cwsLineCurrentCVsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the Coding violations(CV) threshold for the current
        15-min interval, above which alarm is generated.
        This threshold is the same for Far End and Near End."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsLineAlarmEntry 6 }

cwsLineTotalCVsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the Coding violations(CV) threshold for the
        24 hour interval, above which alarm is generated.
        This threshold is the same for Far End and Near End."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsLineAlarmEntry 7 }

cwsLineCurrentUASsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the Unavailable Seconds(UAS) threshold for the current 
        15-min, above which alarm is generated.
        This threshold is the same for Far End and Near End. "
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    ::= { cwsLineAlarmEntry 8 }

cwsLineTotalUASsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the Unavailable Seconds(UAS) threshold for the
        24 hour interval above which alarm is generated.
        This threshold is the same for Far End and Near End. "
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    ::= { cwsLineAlarmEntry 9 }

cwsLineStatAlarmStatus OBJECT-TYPE
    SYNTAX Unsigned32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
      "This variable indicates the  status of the sonet line.
       This object is updated every 15-minutes.
       Once the current 15-min window has passed,
       and there are no errors in the current 15-min window, the
       object is cleared from the lower level sonet task.
       The cwsLineStatAlarmStatus
       is a bit map represented as a sum, therefore,
       it can represent multiple defects simultaneously.
       If none of the bits are set, it indicates no defect.  
       The various bit-positions are:
                  1  sonetLineTotalESs
                  2  sonetLineTotalSESs
                  3  sonetLineTotalCVs
                  4  sonetLineTotalUASs
                  5  sonetLineCurrentESs
                  6  sonetLineCurrentSESs
                  7  sonetLineCurrentCVs
                  8  sonetLineCurrentUASs
                  9  sonetFarEndLineTotalESs
                  10 sonetFarEndLineTotalSESs
                  11 sonetFarEndLineTotalCVs
                  12 sonetFarEndLineTotalUASs
                  13 sonetFarEndLineCurrentESs
                  14 sonetFarEndLineCurrentSESs
                  15 sonetFarEndLineCurrentCVs
                  16 sonetFarEndLineCurrentUASs"
     ::= { cwsLineAlarmEntry 10 }

--
--
-- Sonet line Current 24 hour period table
--
--

cwsLineCurrent24HrTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CwsLineCurrent24HrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Contains sonet line related current 24 hour counters. 
            A 24 hour interval starts at twelve midnight with 
            reference to node time. In case of a manual change 
            in node time all the counters in cwsLineCurrent24HrTable 
            table get reset to 0."
        ::= { cwsLine 2 }

cwsLineCurrent24HrEntry OBJECT-TYPE
    SYNTAX  CwsLineCurrent24HrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the current 24 hour table. The entries exist for
         active sonet lines."
    INDEX   { ifIndex }
    ::=     { cwsLineCurrent24HrTable 1 }

CwsLineCurrent24HrEntry ::=
        SEQUENCE {
                cwsLineCurrent24HrESs           PerfIntervalCount,
                cwsLineCurrent24HrSESs          PerfIntervalCount,
                cwsLineCurrent24HrCVs           PerfIntervalCount,
                cwsLineCurrent24HrUASs          PerfIntervalCount,
                cwsFELineCurrent24HrESs         PerfIntervalCount,
                cwsFELineCurrent24HrSESs        PerfIntervalCount,
                cwsFELineCurrent24HrCVs         PerfIntervalCount,
                cwsFELineCurrent24HrUASs        PerfIntervalCount
        }

cwsLineCurrent24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of errored seconds encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 1 }

cwsLineCurrent24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SESs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 2 }

cwsLineCurrent24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of CVs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 3 }

cwsLineCurrent24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of UASs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 4 }


cwsFELineCurrent24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end errored seconds encountered in current
            24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 5 }

cwsFELineCurrent24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end SESs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 6 }

cwsFELineCurrent24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end CVs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 7 }

cwsFELineCurrent24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end UASs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLineCurrent24HrEntry 8 }

--
--
-- Sonet Line Previous 24 hour period table
--
--

cwsLinePrevious24HrTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CwsLinePrevious24HrEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
           "Contains sonet line previous 24 hour counters.
            A 24 hour interval starts at twelve midnight with 
            reference to node time. In case of a manual change 
            in node time all the counters in cwsLinePrevious24HrTable
            table get reset to 0."
        ::= { cwsLine 3 }

cwsLinePrevious24HrEntry OBJECT-TYPE
    SYNTAX  CwsLinePrevious24HrEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "An entry in the current 24 hour table. The entries exist for
         active sonet lines."
    INDEX   { ifIndex }
        ::= { cwsLinePrevious24HrTable 1 }

CwsLinePrevious24HrEntry ::=
        SEQUENCE {
                cwsLinePrevious24HrESs           PerfIntervalCount,
                cwsLinePrevious24HrSESs          PerfIntervalCount,
                cwsLinePrevious24HrCVs           PerfIntervalCount,
                cwsLinePrevious24HrUASs          PerfIntervalCount,
                cwsFELinePrevious24HrESs         PerfIntervalCount,
                cwsFELinePrevious24HrSESs        PerfIntervalCount,
                cwsFELinePrevious24HrCVs         PerfIntervalCount,
                cwsFELinePrevious24HrUASs        PerfIntervalCount
        }

cwsLinePrevious24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of errored seconds encountered in previous 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 1 }

cwsLinePrevious24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SESs encountered in previous 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 2 }

cwsLinePrevious24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of CVs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 3 }

cwsLinePrevious24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of UASs encountered in previous 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 4 }


cwsFELinePrevious24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end errored seconds encountered in previous
            24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 5 }

cwsFELinePrevious24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end SESs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 6 }

cwsFELinePrevious24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end CVs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5,GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 7 }

cwsFELinePrevious24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end UASs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsLinePrevious24HrEntry 8 }

-- ----------------------------------------------------------------
--
-- Path Alarm Table
--
-- ----------------------------------------------------------------
 
cwsPathAlarmTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF CwsPathAlarmEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "The SONET/SDH Path Alarm table. This table contains objects 
        for thresholds which a user can set. When any threshold is 
        exceeded, an alarm is set.
        Changing any threshold will affect  both the Near End and
        Far End(remote end of the line) threshold."
     ::= { cwsPath 1 }
     
cwsPathAlarmEntry OBJECT-TYPE
     SYNTAX  CwsPathAlarmEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in the SONET/SDH Path Alarm table.
        Thresholds maybe specified for
        errored seconds(ES), severely errored seconds(SES), severely
        errored  framing seconds(SEFS),coding violations(CV) and
        unavailable seconds (UAS) for path layer of sonet lines.
        Once these thresholds are exceeded, minor or major alarm is
        raised.
        Please refer RFC1595 for descriptions  of ES,SES,SEFS,CV,UAS."
     INDEX   { ifIndex }
     ::= { cwsPathAlarmTable 1 }


CwsPathAlarmEntry ::=
     SEQUENCE {
         cwsPathStatisticalAlarmSeverity     INTEGER,
         cwsPathCurrentESsThreshold          Unsigned32,
         cwsPathTotalESsThreshold            Unsigned32,
         cwsPathCurrentSESsThreshold         Unsigned32,
         cwsPathTotalSESsThreshold           Unsigned32,
         cwsPathCurrentCVsThreshold          Unsigned32,
         cwsPathTotalCVsThreshold            Unsigned32,
         cwsPathCurrentUASsThreshold         Unsigned32,
         cwsPathTotalUASsThreshold           Unsigned32,
         cwsPathStatAlarmStatus              Unsigned32 
     }

cwsPathStatisticalAlarmSeverity OBJECT-TYPE
     SYNTAX  INTEGER {
             minor(1),
             major(2),
             none(3)
             }
     MAX-ACCESS  read-write
     STATUS  current
     DESCRIPTION
         "By setting this object to major or minor, a minor or major
          severity alarm is raised when any statistical threshold
          is exceeded. By default TCA crossing does not raise any alarm."
     DEFVAL { none }
     ::= { cwsPathAlarmEntry 1 }

cwsPathCurrentESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This object indicates the threshold for errored seconds(ES)
        for the current 15-min interval, above which alarm is generated.  
        This threshold is the same for Far End (remote end
        of the line) and Near End(this end of the line)."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {20}
    ::= { cwsPathAlarmEntry 2 }

cwsPathTotalESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This object indicates the threshold for errored seconds(ES)
        for the 24-hour interval, above which alarm is generated.
        This threshold is the same for Far End (remote end
        of the line) and Near End(this end of the line)."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {20}
    ::= { cwsPathAlarmEntry 3 }

cwsPathCurrentSESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This object indicates the threshold for severely errored
        seconds(SES) for the current 15-min interval,
        above which alarm is generated.  
        This threshold is the same for Far End and Near End."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsPathAlarmEntry 4 }

cwsPathTotalSESsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This object indicates the threshold for severely errored
        seconds(SES) for the 24 hour interval,
        above which alarm is generated.
        This threshold is the same for Far End and Near End."
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {3}
    ::= { cwsPathAlarmEntry 5 }

cwsPathCurrentCVsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the coding violations threshold for the current
        15-min interval, above which alarm is generated.
        This threshold is the same for Far End and Near End. "
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {25}
    ::= { cwsPathAlarmEntry 6 }

cwsPathTotalCVsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the coding violations threshold for the
        24 hour interval, above which alarm is generated.
        This threshold is the same for Far End and Near End. "
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {25}
    ::= { cwsPathAlarmEntry 7 }


  cwsPathCurrentUASsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the unavailable seconds threshold for the current
        15-min interval, above which alarm is generated.
        This threshold is the same for Far End and Near End. "
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {10}
    ::= { cwsPathAlarmEntry 8 }
 
  cwsPathTotalUASsThreshold OBJECT-TYPE
    SYNTAX  Unsigned32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
       "This is the unavailable seconds threshold for the 
        24 hour interval, above which alarm is generated.
        This threshold is the same for Far End and Near End. "
    REFERENCE
       " RFC2558 Section 3.5, GR-253-CORE "
    DEFVAL {10}
    ::= { cwsPathAlarmEntry 9 }
 
cwsPathStatAlarmStatus OBJECT-TYPE
    SYNTAX Unsigned32  
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
       "This variable indicates the status of the interface.
       The cwsPathStatAlarmStatus is a bit map represented
       as a sum, therefore, it can represent multiple defects
       simultaneously.
       If none of the bits are set, it indicates no defect. 
       The following ar the bit positions:
                  1    sonetPathTotalESs
                  2    sonetPathTotalSESs
                  3    sonetPathTotalCVs
                  4    sonetPathTotalUASs
                  5     sonetPathCurrentESs
                  6     sonetPathCurrentSESs
                  7     sonetPathCurrentCVs
                  8     sonetPathCurrentUASs
                  9    sonetFarEndPathTotalESs
                  10    sonetFarEndPathTotalSESs
                  11    sonetFarEndPathTotalCVs
                  12    sonetFarEndPathTotalUASs
                  13     sonetFarEndPathCurrentESs
                  14     sonetFarEndPathCurrentSESs
                  15     sonetFarEndPathCurrentCVs
                  16     sonetFarEndPathCurrentUASs"
     ::= { cwsPathAlarmEntry 10 }
 
-- ----------------------------------------------------------------
--
-- Path Current Table
--
-- ----------------------------------------------------------------
 
cwsPathCurrent24HrTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF CwsPathCurrent24HrEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "Contains sonet path related current 24 hour interval counter.
        A 24 hour interval starts at twelve midnight with 
        reference to node time. In case of a manual change 
        in node time all the counters in cwsPathCurrent24HrTable
        table get reset to 0."
     ::= { cwsPath 2 }
     
cwsPathCurrent24HrEntry OBJECT-TYPE
     SYNTAX  CwsPathCurrent24HrEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in path current table."
     INDEX   { ifIndex }
     ::= { cwsPathCurrent24HrTable 1 }

CwsPathCurrent24HrEntry ::=
     SEQUENCE {
         cwsPathCurrent24HrESs            PerfIntervalCount,
         cwsPathCurrent24HrSESs           PerfIntervalCount,
         cwsPathCurrent24HrCVs            PerfIntervalCount,
         cwsPathCurrent24HrUASs           PerfIntervalCount,
         cwsFEPathCurrent24HrESs          PerfIntervalCount,
         cwsFEPathCurrent24HrSESs         PerfIntervalCount,
         cwsFEPathCurrent24HrCVs          PerfIntervalCount,
         cwsFEPathCurrent24HrUASs         PerfIntervalCount
     }

cwsPathCurrent24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of errored seconds encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 1 }

cwsPathCurrent24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SESs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5,GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 2 }

cwsPathCurrent24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of CVs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 3 }

cwsPathCurrent24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of UASs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 4 }

cwsFEPathCurrent24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end errored seconds encountered 
            in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 5 }

cwsFEPathCurrent24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end SESs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 6 }

cwsFEPathCurrent24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end CVs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 7 }

cwsFEPathCurrent24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end UASs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5,GR-253-CORE "
        ::= { cwsPathCurrent24HrEntry 8 }

-- ----------------------------------------------------------------
--
-- Path Previous 24 hour Table
--
-- ----------------------------------------------------------------
 
cwsPathPrevious24HrTable OBJECT-TYPE
     SYNTAX  SEQUENCE OF CwsPathPrevious24HrEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "Contains sonet path previous 24 hour interval counter.
        A 24 hour interval starts at twelve midnight with 
        reference to node time. In case of a manual change 
        in node time all the counters in cwsPathPrevious24HrTable
        table get reset to 0."
     ::= { cwsPath 3 }
     
cwsPathPrevious24HrEntry OBJECT-TYPE
     SYNTAX  CwsPathPrevious24HrEntry
     MAX-ACCESS  not-accessible
     STATUS  current
     DESCRIPTION
       "An entry in path current table."
     INDEX   { ifIndex }
     ::= { cwsPathPrevious24HrTable 1 }

CwsPathPrevious24HrEntry ::=
     SEQUENCE {
         cwsPathPrevious24HrESs            PerfIntervalCount,
         cwsPathPrevious24HrSESs           PerfIntervalCount,
         cwsPathPrevious24HrCVs            PerfIntervalCount,
         cwsPathPrevious24HrUASs           PerfIntervalCount,
         cwsFEPathPrevious24HrESs          PerfIntervalCount,
         cwsFEPathPrevious24HrSESs         PerfIntervalCount,
         cwsFEPathPrevious24HrCVs          PerfIntervalCount,
         cwsFEPathPrevious24HrUASs         PerfIntervalCount
     }

cwsPathPrevious24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of errored seconds encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 1 }

cwsPathPrevious24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of SESs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 2 }

cwsPathPrevious24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of CVs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 3 }

cwsPathPrevious24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of UASs encountered in current 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5,GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 4 }

cwsFEPathPrevious24HrESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end errored seconds encountered 
            in previous 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5,GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 5 }

cwsFEPathPrevious24HrSESs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "severely errored seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end SESs encountered in previous 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5,GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 6 }

cwsFEPathPrevious24HrCVs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "coding violations"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end CVs encountered in previous 24 hour interval."
        REFERENCE
           " RFC2558 Section 3.5, GR-253-CORE "
        ::= { cwsPathPrevious24HrEntry 7 }

cwsFEPathPrevious24HrUASs OBJECT-TYPE
        SYNTAX  PerfIntervalCount
        UNITS "Unavailable seconds"
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
           "Number of far end UASs encountered in previous 24 hour interval."
        REFERENCE
           "RFC2558 Section 3.5, GR-253-CORE"
        ::= { cwsPathPrevious24HrEntry 8 }

-- conformance information

ciscoWANSonetMIBConformance OBJECT IDENTIFIER ::= { ciscoWANSonetMIB 2 }
ciscoWANSonetMIBCompliances OBJECT IDENTIFIER ::= {ciscoWANSonetMIBConformance 1}
ciscoWANSonetMIBGroups      OBJECT IDENTIFIER ::= {ciscoWANSonetMIBConformance 2}

ciscoWANSonetMIBCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION
        "The Compliance statement for ciscoSonet management group."
        MODULE -- this module
        MANDATORY-GROUPS { ciscoWANSonetSectAlarmMIBGroup, 
                           ciscoWANSonetLineAlarmMIBGroup,
                           ciscoWANSonetPathAlarmMIBGroup }

        GROUP ciscoWANSonetLinePrev24HrMIBGroup
        DESCRIPTION
           "Implementation of this group is optional."

        GROUP ciscoWANSonetFELineAlarmMIBGroup
        DESCRIPTION
           "Implementation of this group is optional. To be supported
            if far end line tables in standard sonet MIB are supported."

        GROUP ciscoWANSonetFELinePrev24HrMIBGroup
        DESCRIPTION
           "Implementation of this group is optional."

        GROUP ciscoWANSonetPathPrev24HrMIBGroup
        DESCRIPTION
           "Implementation of this group is optional."

        GROUP ciscoWANSonetFEPathAlarmMIBGroup
        DESCRIPTION
           "Implementation of this group is optional. To be supported
            if far end path tables in standard sonet MIB are supported."

        GROUP    ciscoWANSonetFEPathPrev24HrMIBGroup
        DESCRIPTION
           "Implementation of this group is optional."
        ::= {ciscoWANSonetMIBCompliances 1}

-- units of conformance
ciscoWANSonetSectAlarmMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsSectionStatisticalAlarmSeverity,    
        cwsSectionCurrentESsThreshold,    
        cwsSectionTotalESsThreshold,    
        cwsSectionCurrentSESsThreshold,  
        cwsSectionTotalSESsThreshold,  
        cwsSectionCurrentSEFSsThreshold,
        cwsSectionTotalSEFSsThreshold,
        cwsSectionCurrentCVsThreshold,
        cwsSectionTotalCVsThreshold,
        cwsSectionStatAlarmStatus,         
        cwsSectionCurrent24HrESs,
        cwsSectionCurrent24HrSESs,
        cwsSectionCurrent24HrSEFSs,
        cwsSectionCurrent24HrCVs
        }
       STATUS current
       DESCRIPTION
         " These are objects related to ciscoSonet alarm group "
       ::= { ciscoWANSonetMIBGroups 1}

ciscoWANSonetSectPrev24HrMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsSectionPrevious24HrESs,
        cwsSectionPrevious24HrSESs,
        cwsSectionPrevious24HrSEFSs,
        cwsSectionPrevious24HrCVs
        }
       STATUS current
       DESCRIPTION
         "Sonet section previous 24 hour counter objects."
       ::= { ciscoWANSonetMIBGroups 2}

ciscoWANSonetLineAlarmMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsLineStatisticalAlarmSeverity,
        cwsLineCurrentESsThreshold,   
        cwsLineTotalESsThreshold,   
        cwsLineCurrentSESsThreshold, 
        cwsLineTotalSESsThreshold, 
        cwsLineCurrentCVsThreshold,       
        cwsLineTotalCVsThreshold,       
        cwsLineCurrentUASsThreshold,     
        cwsLineTotalUASsThreshold,     
        cwsLineStatAlarmStatus,
        cwsLineCurrent24HrESs,
        cwsLineCurrent24HrSESs,
        cwsLineCurrent24HrCVs,
        cwsLineCurrent24HrUASs
        }
       STATUS current
       DESCRIPTION
         "These are objects related to ciscoSonet line alarm group."
       ::= { ciscoWANSonetMIBGroups 3}

ciscoWANSonetFELineAlarmMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsFELineCurrent24HrESs,
        cwsFELineCurrent24HrSESs,
        cwsFELineCurrent24HrCVs,
        cwsFELineCurrent24HrUASs
        }
       STATUS current
       DESCRIPTION
         "These are sonet far end line current 24 hour counter 
          objects."
       ::= { ciscoWANSonetMIBGroups 4}

ciscoWANSonetLinePrev24HrMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsLinePrevious24HrESs,
        cwsLinePrevious24HrSESs,
        cwsLinePrevious24HrCVs,
        cwsLinePrevious24HrUASs
        }
       STATUS current
       DESCRIPTION
         "Sonet line previous 24 hour counter objects."
       ::= { ciscoWANSonetMIBGroups 5}

ciscoWANSonetFELinePrev24HrMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsFELinePrevious24HrESs,
        cwsFELinePrevious24HrSESs,
        cwsFELinePrevious24HrCVs,
        cwsFELinePrevious24HrUASs
        }
       STATUS current
       DESCRIPTION
         "Far end sonet line previous 24 hour counter objects."
       ::= { ciscoWANSonetMIBGroups 6}

ciscoWANSonetPathAlarmMIBGroup OBJECT-GROUP
        OBJECTS { 
        cwsPathStatisticalAlarmSeverity,    
        cwsPathCurrentESsThreshold,   
        cwsPathTotalESsThreshold,
        cwsPathCurrentSESsThreshold, 
        cwsPathTotalSESsThreshold,
        cwsPathCurrentCVsThreshold, 
        cwsPathTotalCVsThreshold,
        cwsPathCurrentUASsThreshold,
        cwsPathTotalUASsThreshold,
        cwsPathStatAlarmStatus,
        cwsPathCurrent24HrESs,
        cwsPathCurrent24HrSESs,
        cwsPathCurrent24HrCVs,
        cwsPathCurrent24HrUASs
        }
       STATUS current
       DESCRIPTION
         " These are objects related to ciscoSonet path alarm group "
       ::= { ciscoWANSonetMIBGroups 7}


ciscoWANSonetFEPathAlarmMIBGroup OBJECT-GROUP
        OBJECTS { 
        cwsFEPathCurrent24HrESs,
        cwsFEPathCurrent24HrSESs,
        cwsFEPathCurrent24HrCVs,
        cwsFEPathCurrent24HrUASs
        }
       STATUS current
       DESCRIPTION
         "These are far end sonet path current 24 hour counter
          objects."
       ::= { ciscoWANSonetMIBGroups 8}

ciscoWANSonetPathPrev24HrMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsPathPrevious24HrESs,
        cwsPathPrevious24HrSESs,
        cwsPathPrevious24HrCVs,
        cwsPathPrevious24HrUASs
        }
       STATUS current
       DESCRIPTION
         "Sonet path previous 24 hour counters."
       ::= { ciscoWANSonetMIBGroups 9}

ciscoWANSonetFEPathPrev24HrMIBGroup OBJECT-GROUP
        OBJECTS {
        cwsFEPathPrevious24HrESs,
        cwsFEPathPrevious24HrSESs,
        cwsFEPathPrevious24HrCVs,
        cwsFEPathPrevious24HrUASs 
        }
       STATUS current
       DESCRIPTION
         "Theses are far end sonet path previous 24 hour counter
          objects."
       ::= { ciscoWANSonetMIBGroups 10}

END