CISCO-WAN-SRM-MIB.mib object view, vendor Stratacom
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-WAN-SRM-MIB and use it to monitor vendor specific OID's.
CISCO-WAN-SRM-MIB file content
Object view of CISCO-WAN-SRM-MIB:
| Scalar Object |
| srm3T3CnfGrpEntry |
.1.3.6.1.4.1.351.110.3.10.1.1 |
|
an entry in the T3 configuration table
|
| srmeCnfGrpEntry |
.1.3.6.1.4.1.351.110.3.22.1.1 |
|
an entry in the SRME Distribution configuration table
|
| Tabular Object |
| srmT3LineNum |
.1.3.6.1.4.1.351.110.3.10.1.1.1 |
|
Select T3 line number.
There is no default value for this object.
|
| srmStartT1LineNum |
.1.3.6.1.4.1.351.110.3.10.1.1.2 |
|
The start T1 number to be affected.
There is no default value for this object.
|
| srmT1RowStatus |
.1.3.6.1.4.1.351.110.3.10.1.1.3 |
|
a command is used to add, delete, or modify
one or more DS1 mapping.
Default value is delete.
|
| srmTargetSlotNum |
.1.3.6.1.4.1.351.110.3.10.1.1.4 |
|
specify the target slot number to be linked.
There is no default value for this object.
For MGX8850: SRM01 services slots 1 - 6 and 9 - 14,
SRM02 services slots 17 - 22 and 25 - 30
For MGX8220: SYNTAX Integer32 (5 ..14)
|
| srmTargetSlotLineNum |
.1.3.6.1.4.1.351.110.3.10.1.1.5 |
|
0 means not assigned.
There is no default value for this object.
|
| srmeLineNum |
.1.3.6.1.4.1.351.110.3.22.1.1.1 |
|
This object identifies the SRME line number.
For OC3/STM1: SYNTAX Integer32 1
There is no default value for this object.
|
| srmeStartVtNum |
.1.3.6.1.4.1.351.110.3.22.1.1.2 |
|
The start T1 or E1 number (virtual tributary) to be affected.
For OC3 with T1 tributaries: SYNTAX Integer32 (1 .. 84)
For STM1 with E1 tributaries: SYNTAX Integer32 (1 .. 63)
There is no default value for this object.
|
| srmeRowStatus |
.1.3.6.1.4.1.351.110.3.22.1.1.3 |
|
Command used to add, delete, or modify
one or more T1 or E1 mappings. Only the
srmeVtFramingType object can be modified once the
distribution link is added. To modify all other
objects, user should first delete the link and
add it again.
Default value is modify(3).
|
| srmeTargetSlotNum |
.1.3.6.1.4.1.351.110.3.22.1.1.4 |
|
This object specifies the target slot number to be linked.
There is no default value for this object.
For MGX8x50: SRM01 services slots 1 - 6 and 9 - 14,
SRM02 services slots 17 - 22 and 25 - 30
For MGX8x30: service slots 3-6 and 10-13.
|
| srmeTargetSlotLineNum |
.1.3.6.1.4.1.351.110.3.22.1.1.5 |
|
Specify the target slot's line to be linked.
The value zero means, the target line number is
not assigned.
There is no default value for this object.
|
| srmeVtFramingType |
.1.3.6.1.4.1.351.110.3.22.1.1.6 |
|
Specifies the Framing Type of the target slot line.
This is applicable only if the target module is a
T1 Service Module and byte sync mapping is used on
SRME. Not applicable to E1 Service Modules.
sf: Superframe or D4
esf: Extended Superframe.
Default is 'esf' if SRME lines are configured for
byte-synchronous mapping, Else, the default is notApplicable.
|
| Table |
| srm3T3CnfGrpTable |
.1.3.6.1.4.1.351.110.3.10.1 |
|
The SRM 3T3 configuration table, it is the
distribution of a T3 line.
|
| srmeCnfGrpTable |
.1.3.6.1.4.1.351.110.3.22.1 |
|
The SRME configuration table for bulk distribution of
SRME lines.
|
| Object Identifier |
| ciscoWanSrmMIB |
.1.3.6.1.4.1.351.150.30 |
|
The MIB module for configuration of bulk distribution
(de-multiplexing of traffic from higher-bandwidth to
lower-bandwidth interfaces).
This is used for configuring bulk distribution of
T3 interfaces on T1 modules supported in MGX82xx series.
Some of the T1 modules are AUSM, FRSM,CESM.
This MIB module also contains info. on configuring
bulk distribution of SONET interfaces(VT interfaces)
on T1 Modules.
SRM - Service Resource Module
SRME - Service Resource Module Enhanced.
|
| srm3T3CnfGrp |
.1.3.6.1.4.1.351.110.3.10 |
| srmeCnfGrp |
.1.3.6.1.4.1.351.110.3.22 |
| ciscoWanSrmMIBConformance |
.1.3.6.1.4.1.351.150.30.2 |
| ciscoWanSrmMIBGroups |
.1.3.6.1.4.1.351.150.30.2.1 |
| ciscoWanSrmMIBCompliances |
.1.3.6.1.4.1.351.150.30.2.2 |
| Group |
| ciscoWanSrmConfGroup |
.1.3.6.1.4.1.351.150.30.2.1.1 |
|
The collection of objects which are used for
configuring bulk distribution for SRM module.
|
| ciscoWanSrmeConfGroup |
.1.3.6.1.4.1.351.150.30.2.1.2 |
|
The collection of objects which are used for
configuring bulk distribution for SRM-E module.
|
