ERR-STATUS-MIB device MIB details by Stratacom

ERR-STATUS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ERR-STATUS-MIB.

Vendor:	Stratacom
Mib:	ERR-STATUS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- ERROR STATUS MIB
--
-- June, 2002
--
-- Copyright (c) 1996-2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

-- 
-- LAST-UPDATED "200207170000Z"
-- DESCRIPTION
--     "The mib module for reporting additional Error Status
--     for SNMP SET requests. Using this MIB, SNMP manager
--     can determine whether the SET is failed due to
--     resource issue, security issue or application error
--     (unsupported values, inconsistencies between the objects etc)
--     issue.
--
--     This MIB contains the objects which can be used
--     for getting the detailed information about a SNMP
--     SET failure. The Standard SNMP v1 prtocol supports
--     only few error codes on a SET failure.
-- 
-- REVISION "200207170000Z"
-- DESCRIPTION
--     - Clarified some descriptions
--
-- REVISION "200204080000Z"
-- DESCRIPTION
--     - added enums for IMA features.
--
-- REVISION "200112280000Z"
-- DESCRIPTION
-- 	- Card redundancy should be deleted before the last bulk
--	distribution link can be deleted. 
--	delRedBeforeLastLinkDelete(88) is introduced to display 
--	the proper error message.
--
-- REVISION "200110230000Z"
-- DESCRIPTION
--     - added enum rpmConfigCopyinProgress(762) for RPM-PR.
--
-- REVISION "200108230000Z"
-- DESCRIPTION
--     - Clarified descriptions of the objects."
--


ERR-STATUS-MIB DEFINITIONS ::= BEGIN
IMPORTS
        stratacom       FROM    CISCOWAN-SMI
        OBJECT-TYPE     FROM    RFC-1212
	DisplayString   FROM    RFC1213-MIB;


-- ------------------------------------------------------------------------
--
-- errStatus group
-- Error Status Table
--
-- ------------------------------------------------------------------------
strmErrors      OBJECT IDENTIFIER ::= { stratacom 910 }
-- This object contains the value of the request id for the newest
-- entry in the error status table. Many management applications
-- have no knowledge of the request ids used by the SNMP engine.
-- These applications can get the value of this object and then
-- use it to retrieve the error status for the last SET operation.

errStatusLastIndex  OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION "If at least one entry exists in the error status table
                 for the given manager, the value of this object contains
                 the index corresponding to the last entry. If no entry
                 exists in the error status table for the given manager
                 the value of this object is -1."
        ::= { strmErrors 1  }

--
-- The following table is used to maintain status information about
-- SNMP requests from a Manager.  When an SNMP request completes, an 
-- entry is created.  In addition to successful status, the manager
-- is provided information associated with any failed requests. This
-- table is indexed by request ID.  The request Id is the SNMP PDU 
-- identifier associated with the failed request.
--
-- Currently a limit of 100 entries are imposed on this table. Each
-- manager is allowed to access it's own table.  Individual manager
-- access is determined by IP address.
--
errStatusTable OBJECT-TYPE 
    SYNTAX      SEQUENCE OF ErrStatusTableEntry
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION "A List of Error Statuses for a given SNMP Manager"
        ::= { strmErrors 2  }

errStatusTableEntry OBJECT-TYPE
    SYNTAX      ErrStatusTableEntry
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION "A General Error Status Entry."
    INDEX   { errReqId }
        ::= { errStatusTable 1  }

ErrStatusTableEntry ::=
    SEQUENCE {
        errReqId                INTEGER,    
        errCode                 INTEGER,
        errStatusDesc           DisplayString
    }


errReqId OBJECT-TYPE
    SYNTAX      INTEGER 
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION "This object contains the PDU request ID associated with
                 the error." 
        ::= { errStatusTableEntry 1  }

errCode OBJECT-TYPE
    SYNTAX      INTEGER {
                success(1),
                existErr(2),
                syntaxErr(3),
                resourceErr(4),
                databaseLocked(5),
                otherErr(6),
                wrongType(7),
                wrongLength(8),
                wrongEncoding(9),
                wrongValue(10),
                noCreation(11),
                inconsistentValue(12),
                resourceUnavailable(13),
                commitFailed(14),
                undoFailed(15),
                authorizationError(16),
                notWritable(17),
                inconsistentName(18),
                featureDisabled(19),
                m32Problem(20),
                sarProblem(21),
                bnmProblem(22),
                ascUpdFailed(23),
                lineEnabled(24),
                lineDisabled(25),
                lmMismatch(26),
                lineHasPorts(27),
                portEnabled(28),
                portDisable(29),
                portHasChan(30),
                chanEnabled(31),
                chanDisabled(32),
                dlciEnabled(33),
                dlciDisabled(34),
                ovrsubconnPass(35),
                ovrsubConnFail(36),
                portVpiVciInUse(37),
                invalidPrimarySlot(38),
                invalidSecondarySlot(39),
                linkFull(40),
                primaryDuplicate(41),
                secondaryDuplicate(42),
                primaryNotPresent(43),
                secondaryNotPresent(44),
                srmNotPresent(45),
                invalidCommand(46),
                invalidCardType(47),
                featureMismatch(48),
                lmiEnabled(49),  
                dlciUsed(50),  
                invalidRedType(51),
                bertResourcesNotFree(52),
                bertResourcesNotReady(53),
                bertSlotEmpty(54),
                bertUnsupportedCard(55),
                bertNotOwner(56),
                bertStartFailed(57),
                bertModFailed(58),
                bertDelFailed(59),
                bertUnsupportedType(60),
                bertWrongParams(61),
                bertUnableToFree(62),
                bertGeneralError(63),
                portInLoopback(64),
                invalidT3LineNum(65),
                invalidT1LineNum(66),
                invalidSlotNum(67),
                invalidLineNum(68),
                notEnoughLine(69),
                lineInUse(70),
                t3NotEnabled(71),
                smNotPresent(72),
                smNotPrimary(73),
                srm3t3NotPresent(74),
                lineInLoopback(75),
                lineInconsistentLoopback(76),
                lineLoopNotAllowed(77),
                versionMismatch(78),
                portOutOfService(79),
                lineOutOfService(80),
                bertNotConfigured(81),
                bertConfigurationIncomplete(82),
                testAlreadyOn(83),
                testNotOn(84),
                loopUpFailure(85),
                loopDownFailure(86),
                bertPatternSyncFailure(87),
                delRedBeforeLastLinkDelete(88),
                bertInvalidState(89),
                bertEirOneInTenNotSupport(90),

                -- error codes added for PAR 100 - 199
                localIfNotOk(100),
                remoteIfNotOk(101),
                localChannelsNotEnough(102),
                remoteChannelsNotEnough(103),
                localAddrNotOk(104),
                remoteAddrNotOk(105),
                localAddrExist(106),
                remoteAddrExist(107),
                invalidConnAddr(108),
                maxConnsExceeded(109),
                lmiTrkNotAdded(110),
                connNotExist(111),
                vpiConflictForVcc(112),
                vpiConflictForVpc(113),
                vpiRangeErr(114),
                vciRangeErr(115),
                invalidConnType(116),
                genConnErr(117),
                masterConnAllocFailed(118),
                slaveConnAllocFailed(119),
                masterLogepAllocFailed(120),
                slaveLogepAllocFailed(121),
                masterCmtFailed(122),
                slaveCmtFailed(123),
                daxCmtFailed(124),
                masterChgFailed(125),
                slaveChgFailed(126),
                daxChgFailed(127),
                masterDelFailed(128),
                slaveDelFailed(129),
                daxDelFailed(130),
                masterTimeout(131),
                mxConAddSessionExceeded(132),
                masterSessionUnavail(133),
                slaveSessionUnavail(134),
                unknownDest(135),
                localAddrUnknown(136),
                rmtAddrUnknown(137),
                portHasResPart(138),
                networkBusy(139),
                slaveCnfconNotAllowed(140),

                -- error codes added for SVC-pnni 200 - 249
                pnniConfigurationFail(200),
                pnniInvalidValue(201),
                pnniTargtNodeNotExist(202),
                pnniEntryExist(203),
                pnniEntryNotExist(204),
                pnniTargetNodeAdminUp(205),
                pnniTargetInterfaceNotExist(206),
                pnniInvalidAtmEndStationAddress(207),
                pnniNotReadyForSet(208),
 
                -- error codes aded for SVC-ccb 250 - 349
                ccbNullMessageSent(250),
                ccbOutOfMemory(251),
                ccbSSIMessageAllocationFailed(252),
                ccbSwitchResponseReturnedFailure(253),
                ccbOperationNotPermittedOnControlPort(254),
                ccbPortExists(255),
                ccbPortNotExist(256),
                ccbPortInUseBySwitch(257),
                ccbPortNotOutOfService(258),
                ccbPortUpAlready(259),
                ccbPortDownAlready(260),
                ccbPortTypeNotMatch(261),
                ccbAtmAddrExceedMax(262),
                ccbAtmAddrNotExist(263),
                ccbAtmAddrExist(264),
                ccbAtmAddrNotAllowed(265),
                ccbAtmAddrSendPnniFailed(266),

                -- error code added for SPVC 348 - 449
                localIfInvalid(348),
                remoteIfInvalid(349),
                vpiVciNotAvail(350),
                rmtAddrRequired(351),
                endptAllocFailed(352),
                legAllocFailed(353),
                invalidTrafficParam(354),
                daxNoSlave(355),
                daxSlaveNotAvail(356),
                endptNotExist(357),
                endptNotPersistent(358),
                delFailed(359),
                modFailed(360),
                upFailed(361),
                downFailed(362),
                rerouteFailed(363),
                operNotAppl(364),
                connAlreadyUp(365),
                connAlreadyDown(366),
                daxSlaveParamMismatch(367),
                daxSlaveTrafficParamModNotAllowed(368),
                daxRerouteNotAppl(369),
                interfaceDown(370),
                spvcNotAllowedOnPart(371),
                spvcBlockEnabled(372),
                spvcNotAllowedOnIntf(373),
                spvcNotAllowedDelDaxSlaveEp(374),
                noPepToDelete(375),
                portDontSuppoSc(376),
                lscrBiggerThanLpcr(377),
                rscrBiggerThanRpcr(378),
                cbrNeedsLpcr(379),
                cbrNeedsRpcr(380),
                vbrNeedsLpcr(381),
                vbrNeedsRpcr(382),
                abrNeedsLpcr(383),
                abrNeedsRpcr(384),
                badRcdv(385),
                badRctd(386),
                badRMaxClr(387),
                lCrTooBig(388),
                rCrTooBig(389),
                ctdNotApplicableServiceType(390),
                cdvNotApplicableServiceType(391),
                vccExistsVpi(392),
                epAlreadyExists(393),
                ctdNotAllowedSlaveEp(394),
                cdcNotAllowedSlaveEp(395),
                mcNotAllowedSlaveEp(396),
                cantsetOamseg(397),
                networkBusyTryLater(398),
                frameDiscardNotAllOnSlave(399), 
                partiesOnConnection(400),
                notAllowedOnP2MPConn(401),
                maxP2MPConnsExceeded(402),
 
                commandProcNotReady(601),
                invalidIfIndex(602),
                invalidShelfNum(603),
                invalidBayNum(605),
                invalidPortNum(606),
                provDisBcMismatch(607) ,
                configNotSupported(608),
                frontcardMismatch(609),
                portRateSumExceedLnRate(610),
                axsmDiskErr(611),
                portRateExceedLnRate(612),
                cannotModSctID(613),
                partNotExist(614), 
                partExist(615),
                badBayOrLine(616),
                vsiSetErr(617),
                vsisAddPart(618),
                vsisCnfPart(619),
                vsisDelPart(620),
                partRateExceedsPortRate(621), 
                lineResvForE3(622),
                lineResvForT3(623),
                minRateExceedMax(624),
                vpiLoExceedHi(625),
                vciLoExceedHi(626),
                swErr(627),
                actsctCntExceed(628),
                sctFileMissing(629),
                sctFileBad(630),
                sctSgParmMismatch(631),
                hardwareConfigErr(633),
                vpiOverlap(634),
                vciOverlap(635),
                cannotAllocLcn(636),
                cannotAllocBw(637),
                partPortParmMismatch(638),
                cannotReleaseLcn(639),
                cannotReleaseBw(640),
                cannotModLcnRange(641),
                cannotModBwRange(642),
                invalidPartNum(643),
                invalidCtlrNum(644),
                invalidSlave(645),
                invalidConnref(646),
                dupRequest(647),
                pendingRequest(648),
                outOfMemory(649),
                resourceInUse(650),
                dcMismatch(651),
                dcMissing(652),
                bcMismatch(653),
                bcMissing(654),
                invalidDiskRecord(655),
                invalidCellMapping(656),
                invalidLineTrace(657),
                invalidTcaSeverity(658),
                invalidAtmPhy(659),
                conflictingPort(660),
                minConnsExceedsMax(661),
                partTblFull(662),
                frozenStatsLvl(663),
                invalidStatsLvl(664),
                invalidImaGroup(665),
                imaGroupEnable(666),
                imaGroupDisable(667),
                imaGroupHasPorts(668),
                cannotCnfProtLine(669),
                workingLineDown(670),
                imaModuleNotReady(671),
                imaInvalidParameters(672),
                imaInvalidLineLength(673),
                imaInvalidPattern(674),
                imaInvalidErrInsertionRate(675),
                imaProtocolError(676),
                imaInsufficientAtmPhy(677),
                imaInvalidClkSource(678),
                imaInvalidLoopbackConf(679),
                imaNullHdrNullPyldNotSupported(680),
                imaVer2Txm128Only(681),
                imaFeatureIsBlocked(682),
                imaMinBandwidthViolation(683),
                imaLinkDeletePending(684),
                imaLinkExist(685),
                imaLinkTestInvalidStatusValue(686),
                imaGroupInvalidMaxDelay(687),
                imaGroupInvalidVersion(688),
                imaLinkNotInGroup(689),
                imaTestLinkNotInGroup(690),
                imaGroupDelayClrErr(691),
                imaGroupItcClockNotSupport(692),
                imaGroupFrameLengthErr(693),
                imaGroupAtmPhyLimit(694),
                imaAddportOnLinkError(695),
                imaServiceModuleError(696),

                -- error code added for RPM 701 - 800
                invalidParam(701),
                badIpcData(702),
                rvtNotActive(703),
                diskUpdFailed(704),
                subIfDown(705),
                vpiOutOfRange(706),
                vciOutOfRange(707),
                vcdOutOfRange(708),
                inarpNotAllowed(709),
                vcdInUse(710),
                secondVccOnPTP(711),
                unknownLANEType(712),
                secondIlmiVc(713),
                unknownEncapType(714),
                pppErr(715),
                invalidVpi(716),
                invalidVci(717),
                serviceTypeNotSupported(718),
                cantChgVpcFlag(719),
                cantChgRmtVpi(720),
                cantChgRmtVci(721),
                cantChgRmtAddr(722),
                cantChgMastership(723),
                cantChgSubIf(724),
                cantChgServType(725),
                cantCnfVc(726),
                cantDelVc(727),
                connNotFound(728),
                subIfNotExist(729),
                endptNotMaster(730),
                ctlrIdRequired(731),
                ingBwRangeRequired(732),
                egrBwRangeRequired(733),
                vpiRangeRequired(734),
                vciRangeRequired(735),
                invalidIngBwRange(736),
                invalidEgrBwRange(737),
                ingBwNotAvail(738),
                egrBwNotAvail(739),
                invalidVpiRange(740),
                invalidVciRange(741),
                vpiRangeInUse(742),
                vciRangeInUse(743),
                cantChgCtlrId(744),
                cantChgPartType(745),
                cantModPart(746),
                cantDelPart(747),
                subIfExist(748),
                invalidIpAddr(749),
                subIfTypeRequired(750),
                cantChgSubIfType(751),
                subIfNotFound(752),
                cantShutMainIf(753),
                cantDelMainIf(754),
                rpmNotActive(755),
                ipcErr(756),
                rpmNoResponse(757),
                invalidSrmeLineNum(758),
                invalidVtNum(759),
                invalidVtMapping(760),
                invalidVtFrameType(761),
                rpmConfigCopyinProgress(762)
        }
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION "This object contains an error status code used by
                 the manager to take automated corrective actions
                 when previous SET requests encountered failures.
                 If no error is encountered on prior SET requests,
                 a successful(1) status might be provided at the 
                 discretion of the agent."
        ::= { errStatusTableEntry 2  }

errStatusDesc OBJECT-TYPE
    SYNTAX      DisplayString
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION "This object contains error status information for
                 failed SETS to one or more objects. This object is
                 updated only on failed SETS.
                 Since the SNMP standard allows only limited number of
                 error status returns, the managers can retrieve this
                 variable to get additional information on a 
                 failed SET. Typically this object will contain 
                 information specifying date, MIB object Name,
                 and additional error specific information."
        ::= { errStatusTableEntry 3  }
 
END