LANPLEX-MIB-1-2-9 -- Copyright 1995 by 3Com Corporation. All rights reserved. -- MIB file name: lanplex-mib -- available in these 3Com devices: Lanplex hubs -- For support or more info, check 3Com's web page at http://www.3com.com -- LANplex Management Information Base -- Version 1.2.9 -- 12 April, 1994 -- 3Com Corporation -- 85 Rangeway Road -- North Billerica, MA 01862 -- (508) 670-9009 -- Change History: -- 4/11/94 eah Removed lpBridgePortAddressLearnedEvent and -- lpBridgePortAddressForgottenEvent traps -- 4/ 7/94 eah Added lpBridgePortReceiveMulticastLimitExceededCount -- 6/30/93 eah Added lpSystemSmtProxyEvents -- 6/15/93 eah Added lpEthernetPortType -- 6/11/93 eah Added lpBridgeLocalIndex -- 5/29/93 eah Deprecated lpSlot express attributes. -- lpFddiMacReceiveMulticastThreshold, and -- lpEthernetPortReceiveMulticastThreshold -- Added lpSlotBridgeFunctionCount, -- lpSlotBridgeFunctionBaseIndex, -- lpSystemSmtProxyTimeoutBase -- 3/ 9/93 eah Added lpTrapEnterprise and lpTrapDest -- groups -- 3/ 3/93 eah Added enum for ESM to board type -- objects -- 2/18/93 eah Changed address threshold, address -- learned, and address forgotten events -- to use bridge attributes -- 2/ 2/93 eah Created new group lpBridge -- Deprecated lpExpress, -- lpExpressFddiPort, -- lpExpressEthernetPort, and -- lpExpressEthernetPortAddress groups -- Added lpSystemBridgeFunctionCount to -- the lpSystem group -- Deprecated -- lpSystemExpressFunctionCount, -- lpSystemExpressFddiPortCount, and -- lpSystemExpressEthernetPortCount -- 12/17/92 eah Replaced lpPowerSupplyFailureType by -- lpPowerSupplyLastFailure which is -- read-only and includes a none value -- lpPowerSupplyFailureType was deprecated -- Changed lpPowerSupplyFailureEvent to -- use new object -- 3/ 1/92 jp Added new groups using logical -- numbering scheme. Marked old groups -- as deprecated. -- 6/ 4/92 jp Added lpFddiMacReceiveMulticastThreshold -- and lpEthernetPortReceiveMulticastThreshold -- objects. -- 6/15/92 jp Added lpFddiMacBeaconHistory object. ----------------------------------------------------------------------------------- LANPLEX-MIB-1-2-9 DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, NetworkAddress FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9], and the TRAP-TYPE macro as defined in [10] synernetics OBJECT IDENTIFIER ::= { enterprises 114 } lanplex OBJECT IDENTIFIER ::= { synernetics 1 } -- this is the lanplex MIB module lanplexMib OBJECT IDENTIFIER ::= { lanplex 1 } chassis OBJECT IDENTIFIER ::= { lanplexMib 1 } slot OBJECT IDENTIFIER ::= { lanplexMib 2 } spm OBJECT IDENTIFIER ::= { lanplexMib 3 } feam OBJECT IDENTIFIER ::= { lanplexMib 4 } fcm OBJECT IDENTIFIER ::= { lanplexMib 5 } port OBJECT IDENTIFIER ::= { lanplexMib 6 } eem OBJECT IDENTIFIER ::= { lanplexMib 7 } eemFddiMAC OBJECT IDENTIFIER ::= { lanplexMib 8 } eemEthernetPort OBJECT IDENTIFIER ::= { lanplexMib 9 } eemMACAddress OBJECT IDENTIFIER ::= { lanplexMib 10 } -- The following are new groups defined in this revision -- of the lanplex-mib. These groups contain all the functionality -- of the above named groups plus newly defined objects. lpSystem OBJECT IDENTIFIER ::= { lanplexMib 11 } lpSlot OBJECT IDENTIFIER ::= { lanplexMib 12 } lpFddiMac OBJECT IDENTIFIER ::= { lanplexMib 13 } lpEthernetPort OBJECT IDENTIFIER ::= { lanplexMib 14 } lpFddiPort OBJECT IDENTIFIER ::= { lanplexMib 15 } lpExpress OBJECT IDENTIFIER ::= { lanplexMib 16 } lpExpressFddiPort OBJECT IDENTIFIER ::= { lanplexMib 17 } lpExpressEthernetPort OBJECT IDENTIFIER ::= { lanplexMib 18 } lpExpressEthernetPortAddress OBJECT IDENTIFIER ::= { lanplexMib 19 } lpPowerSupply OBJECT IDENTIFIER ::= { lanplexMib 20 } -- New group for bridge support lpBridge OBJECT IDENTIFIER ::= { lanplexMib 21 } -- New groups for controlling trap "filters" lpTrapEnterprise OBJECT IDENTIFIER ::= { lanplexMib 22 } lpTrapDest OBJECT IDENTIFIER ::= { lanplexMib 23 } -- The LANplex Chassis Group -- The Chassis Group contains all objects used to manage the LANplex chassis, -- Note that this group has been marked as deprecated and is -- included here for backward compatibilty. It will be removed -- from the next revision of the lanplex MIB. The objects defined -- in this table are now available via the lpSystem group." chassisId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The unique identifier assigned to this station during manufacturing." ::= { chassis 1 } chassisType OBJECT-TYPE SYNTAX INTEGER { other(1), tweleveSlot(2), fourSlot(3) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of the LANplex chassis." ::= { chassis 2 } chassisRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS deprecated DESCRIPTION "The revision number of the LANplex chassis." ::= { chassis 3 } chassisName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing this chassis." ::= { chassis 4 } chassisNameAbbrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing the generic name for this chassis." ::= { chassis 5 } chassisManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing the manufacturer of this chassis." ::= { chassis 6 } chassisSlotCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of slots in the LANplex chassis." ::= { chassis 7 } chassisBuildTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The build time of the LANplex system software." ::= { chassis 8 } chassisSoftwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS deprecated DESCRIPTION "The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental idenrtifier." ::= { chassis 9 } chassisControlPanelColumns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of columns in the control panel display." ::= { chassis 10 } chassisControlPanelLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of lines in the control panel display." ::= { chassis 11 } chassisControlPanelText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-only STATUS deprecated DESCRIPTION "The currently displayed text in the control panel display." ::= { chassis 12 } chassisAction OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LANplex system." ::= { chassis 13 } -- The lanplex Slot Table slotTable OBJECT-TYPE SYNTAX SEQUENCE OF SlotEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of slot entries. A single instance of this object exists for each slot in the LANplex chassis." ::= { slot 1 } slotEntry OBJECT-TYPE SYNTAX SlotEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A slot entry contains information common to a given slot within a LANplex system Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table." INDEX { slotIndex } ::= { slotTable 1 } SlotEntry ::= SEQUENCE { slotIndex INTEGER, slotBoardType INTEGER, slotBoardRevision OCTET STRING, slotBoardStatus INTEGER, slotBoardName DisplayString, slotBoardNameAbbrev DisplayString, slotBoardAction INTEGER } slotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LANplex chassis." ::= { slotEntry 1 } slotBoardType OBJECT-TYPE SYNTAX INTEGER { unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), eem(6), esm(7), fcm2(8) } ACCESS read-only STATUS deprecated DESCRIPTION "The type of board residing in this slot." ::= { slotEntry 2 } slotBoardRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS deprecated DESCRIPTION "The revision number of the board in this slot." ::= { slotEntry 3 } slotBoardStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), testing(2), offline(3), online(4) } ACCESS read-only STATUS deprecated DESCRIPTION "The status of the board in this slot." ::= { slotEntry 4 } slotBoardName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS deprecated DESCRIPTION "The text string describing this board type." ::= { slotEntry 5 } slotBoardNameAbbrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS deprecated DESCRIPTION "The abbreviation used to describe this board type." ::= { slotEntry 6 } slotBoardAction OBJECT-TYPE SYNTAX INTEGER { other(1), runDiagnostics(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics." ::= { slotEntry 7 } -- The lanplex SPM Table spmTable OBJECT-TYPE SYNTAX SEQUENCE OF SPMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of System Processor Module (SPM) entries. An entry exists for each Slot Table Entry whose board type is SPM. This table is indexed by the physical slot number of this SPM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table." ::= { spm 1 } spmEntry OBJECT-TYPE SYNTAX SPMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A SPM entry contains information common to a single System Processor Module (SPM) within a LANplex system." INDEX { spmSlotIndex } ::= { spmTable 1 } SPMEntry ::= SEQUENCE { spmSlotIndex INTEGER, spmEthernetPortCount INTEGER, spmBaseEthernetPortIndex INTEGER } spmSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LANplex chassis." ::= { spmEntry 1 } spmEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of ethernet ports on this board." ::= { spmEntry 2 } spmBaseEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index for the first ethernet port on this board." ::= { spmEntry 3 } -- The lanplex FEAM Table feamTable OBJECT-TYPE SYNTAX SEQUENCE OF FEAMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of FDDI Enterprise Access Module (FEAM) entries. An entry exists for each Slot Table Entry whose board type is FEAM. This table is indexed by the physical slot number of this FEAM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table." ::= { feam 1 } feamEntry OBJECT-TYPE SYNTAX FEAMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A FEAM entry contains information common to a single FDDI Enterprise Access Module (FEAM) within a LANplex system." INDEX { feamSlotIndex } ::= { feamTable 1 } FEAMEntry ::= SEQUENCE { feamSlotIndex INTEGER, feamMACCount INTEGER, feamBaseMACIndex INTEGER, feamPortCount INTEGER, feamBasePortIndex INTEGER } feamSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LANplex chassis." ::= { feamEntry 1 } feamMACCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI MAC's present on this board." ::= { feamEntry 2 } feamBaseMACIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI MAC on this board. Additional MAC's on this board will have consecutively increasing MAC indices following this index." ::= { feamEntry 3 } feamPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI ports present on this board." ::= { feamEntry 4 } feamBasePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing Port indices following this index." ::= { feamEntry 5 } -- The lanplex FCM Table fcmTable OBJECT-TYPE SYNTAX SEQUENCE OF FCMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of FDDI Concentration Module (FCM) entries. An entry exists for each Slot Table Entry whose board type is FCM. This table is indexed by the physical slot number of this FCM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the lpSlot table." ::= { fcm 1 } fcmEntry OBJECT-TYPE SYNTAX FCMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An FCM entry contains information common to a single FDDI Concentration Module (FCM) within a LANplex system." INDEX { fcmSlotIndex} ::= { fcmTable 1 } FCMEntry ::= SEQUENCE { fcmSlotIndex INTEGER, fcmPortCount INTEGER, fcmBasePortIndex INTEGER } fcmSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LANplex chassis." ::= { fcmEntry 1 } fcmPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI ports present on this board." ::= { fcmEntry 2 } fcmBasePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing Port indices following this index." ::= { fcmEntry 3 } -- The lanplex Port Table portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of port entries. A single instance of this object exists for each port (excluding ethernet ports) in the LANplex system. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available either via the fddiPort group or the enetPort group." ::= { port 1 } portEntry OBJECT-TYPE SYNTAX PortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A Port entry contains information common to a particular port located on a particular board within the LANplex system." INDEX { portSlotIndex, portIndex } ::= { portTable 1 } PortEntry ::= SEQUENCE { portSlotIndex INTEGER, portIndex INTEGER, portLabel DisplayString } portSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LANplex chassis." ::= { portEntry 1 } portIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the port on a particular slot." ::= { portEntry 2 } portLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS deprecated DESCRIPTION "An ASCII text string describing this port." ::= { portEntry 3 } -- The lanplex EEM Table eemTable OBJECT-TYPE SYNTAX SEQUENCE OF EEMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Ethernet Express Module (EEM) entries. An entry exists for each Slot Table Entry whose board type is EEM. This table is indexed by the physical slot number of this EEM within the LANplex chassis. The entries may not have consecutive Slot Indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available either via the slot group or the express group." ::= { eem 1 } eemEntry OBJECT-TYPE SYNTAX EEMEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An EEM entry contains information common to a single Ethernet Express Module (EEM) within a LANplex system." INDEX { eemSlotIndex } ::= { eemTable 1 } EEMEntry ::= SEQUENCE { eemSlotIndex INTEGER, eemFddiMACCount INTEGER, eemBaseFddiMACIndex INTEGER, eemEthernetPortCount INTEGER, eemBaseEthernetPortIndex INTEGER, eemAddressThreshold INTEGER } eemSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this slot within the LANplex chassis." ::= { eemEntry 1 } eemFddiMACCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of FDDI MAC's present on this board." ::= { eemEntry 2 } eemBaseFddiMACIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first FDDI MAC on this board. Additional FDDI MAC's on this board will have consecutively increasing MAC indices following this index." ::= { eemEntry 3 } eemEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet ports present on this board." ::= { eemEntry 4 } eemBaseEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The system-wide index of the first ethernet port on this board. Additional ports on this board will have consecutively increasing Port indices following this index." ::= { eemEntry 5 } eemAddressThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached the event eemAddressThresholdEvent is generated." ::= { eemEntry 6 } -- The lanplex EEM FDDI MAC Table eemFddiMACTable OBJECT-TYPE SYNTAX SEQUENCE OF EEMFddiMACEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of EEM FDDI MAC entries. The entries may not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressFddiPort group." ::= { eemFddiMAC 1 } eemFddiMACEntry OBJECT-TYPE SYNTAX EEMFddiMACEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An EEM FDDI MAC entry contains information common to an FDDI MAC located on an EEM within a LANplex system." INDEX { eemFddiSlotIndex, eemFddiMACIndex} ::= { eemFddiMACTable 1 } EEMFddiMACEntry ::= SEQUENCE { eemFddiSlotIndex INTEGER, eemFddiMACIndex INTEGER, eemFddiMACForwardedCts Counter, eemFddiMACDroppedCts Counter } eemFddiSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of this board." ::= { eemFddiMACEntry 1 } eemFddiMACIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each FDDI MAC on this board." ::= { eemFddiMACEntry 2 } eemFddiMACForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames forwarded by a MAC from an ethernet port to the FDDI network." ::= { eemFddiMACEntry 3 } eemFddiMACDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames that were dropped by a MAC due to local resource limitation or unknown destination MAC address." ::= { eemFddiMACEntry 4 } -- The lanplex EEM Ethernet Port Table eemEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EEMEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of EEM Ethernet Express Port entries. The slot indices may not be consecutive. The MAC indices will be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressEthernetPort group." ::= { eemEthernetPort 1 } eemEthernetPortEntry OBJECT-TYPE SYNTAX EEMEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An EEM Ethernet Express Port entry contains information common to an Ethenet Port located on an Ethernet Express Module (EEM) within a LANplex system." INDEX { eemEthernetPortSlotIndex, eemEthernetPortIndex } ::= { eemEthernetPortTable 1 } EEMEthernetPortEntry ::= SEQUENCE { eemEthernetPortSlotIndex INTEGER, eemEthernetPortIndex INTEGER, eemEthernetPortLabel DisplayString, eemEthernetPortForwardedCts Counter, eemEthernetPortDroppedCts Counter, eemEthernetPortUTurnCts Counter, eemEthernetPortState INTEGER, eemEthernetPortAction INTEGER } eemEthernetPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The physical slot number of the slot containing this port within the LANplex chassis." ::= { eemEthernetPortEntry 1 } eemEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the port on a particular EEM board. This index ranges from 1 to eemEthernetPortCount." ::= { eemEthernetPortEntry 2 } eemEthernetPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS deprecated DESCRIPTION "An ASCII text string describing this ethernet port." ::= { eemEthernetPortEntry 3 } eemEthernetPortForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames forwarded from this ethernet port on to the FDDI network." ::= { eemEthernetPortEntry 4 } eemEthernetPortDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the numer of frames received on this port that were dropped due to the fact that the destination MAC address was determined to be on the same ethernet segment as the source MAC address. ." ::= { eemEthernetPortEntry 5 } eemEthernetPortUTurnCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "A counter indicating the number of frames received on this ethernet port and directed to another ethernet port." ::= { eemEthernetPortEntry 6 } eemEthernetPortState OBJECT-TYPE SYNTAX INTEGER { onlineActive(1), onlineInactive(2), offline(3) } ACCESS read-only STATUS deprecated DESCRIPTION "The state of the Ethernet Express port." ::= { eemEthernetPortEntry 7 } eemEthernetPortAction OBJECT-TYPE SYNTAX INTEGER { other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list." ::= { eemEthernetPortEntry 8 } -- The lanplex EEM Ethernet MAC Address Table eemEthernetMACAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF EEMEthernetMACAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of EEM Ethernet Express Remote MAC Address entries. The slot indices may not be consecutive. The port indices will be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lanplex MIB. The objects defined in this table are now available via the expressEthernetPort group." ::= { eemMACAddress 1 } eemEthernetMACAddressEntry OBJECT-TYPE SYNTAX EEMEthernetMACAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A collection of information describing a remote Ethernet MAC detected to be attached to an Ethernet Express port." INDEX { eemEthernetMACAddressSlotIndex, eemEthernetMACAddressPortIndex, eemEthernetMACAddressIndex} ::= { eemEthernetMACAddressTable 1 } EEMEthernetMACAddressEntry ::= SEQUENCE { eemEthernetMACAddressSlotIndex INTEGER, eemEthernetMACAddressPortIndex INTEGER, eemEthernetMACAddressIndex INTEGER, eemEthernetMACAddressType INTEGER, eemEthernetMACAddressRemoteAddress OCTET STRING, eemEthernetMACAddressIsStatic INTEGER, eemEthernetMACAddressStaticPort INTEGER, eemEthernetMACAddressAge INTEGER } eemEthernetMACAddressSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The physical slot number of the slot containing this EEM within the LANplex chassis." ::= { eemEthernetMACAddressEntry 1 } eemEthernetMACAddressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The port index of this address entry within the table. This index ranges from 1 to eemEthernetPortCount." ::= { eemEthernetMACAddressEntry 2 } eemEthernetMACAddressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The index of this address entry within the table." ::= { eemEthernetMACAddressEntry 3 } eemEthernetMACAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table." ::= { eemEthernetMACAddressEntry 4 } eemEthernetMACAddressRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS deprecated DESCRIPTION "The remote MAC address detected on this Ethernet Express port." ::= { eemEthernetMACAddressEntry 5 } eemEthernetMACAddressIsStatic OBJECT-TYPE SYNTAX INTEGER { isStatic(1), isDynamic(2) } ACCESS read-write STATUS deprecated DESCRIPTION "A value indicating whether this MAC address was statically configured or was dynamically learned on this port." ::= { eemEthernetMACAddressEntry 6 } eemEthernetMACAddressStaticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "If the object eemEthernetMACAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured." ::= { eemEthernetMACAddressEntry 7 } eemEthernetMACAddressAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "This object indicates the time elapsed since this MAC address was added to this port's address table." ::= { eemEthernetMACAddressEntry 8 } -- XXX NEW GROUPS -- The lanplex system Group lpSystemId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier assigned to this system during manufacturing." ::= { lpSystem 1 } lpSystemType OBJECT-TYPE SYNTAX INTEGER { other(1), tweleveSlot(2), fourSlot(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the LANplex system." ::= { lpSystem 2 } lpSystemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing this system." ::= { lpSystem 3 } lpSystemManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing the manufacturer of this system." ::= { lpSystem 4 } lpSystemBackplaneRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework level." ::= { lpSystem 5 } lpSystemSlotCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of slots in the system." ::= { lpSystem 6 } lpSystemMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of memory (RAM), in bytes, present on the system processor board." ::= { lpSystem 7 } lpSystemFlashMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of flash memory, in bytes, present on the system processor board." ::= { lpSystem 8 } lpSystemNvMemorySize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The amount of non-volatile memory, in bytes, present on the system processor board." ::= { lpSystem 9 } lpSystemSoftwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier." ::= { lpSystem 10 } lpSystemBuildTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The build time of the system software." ::= { lpSystem 11 } lpSystemControlPanelHardwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "An 8-bit value specifying the revision level of the control panel hardware." ::= { lpSystem 12 } lpSystemControlPanelSoftwareRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "An 8-bit value specifying the revision level of the control panel software." ::= { lpSystem 13 } lpSystemControlPanelLines OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of lines in the control panel display." ::= { lpSystem 14 } lpSystemControlPanelColumns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of columns in the control panel display." ::= { lpSystem 15 } lpSystemControlPanelText OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The currently displayed text in the control panel display." ::= { lpSystem 16 } lpSystemFddiMacCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI MAC's present in the system." ::= { lpSystem 17 } lpSystemFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI ports present in the system." ::= { lpSystem 18 } lpSystemEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ethernet ports present in the system." ::= { lpSystem 19 } lpSystemExpressFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards present in the system." ::= { lpSystem 20 } lpSystemExpressFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet Express FDDI ports present in the system." ::= { lpSystem 21 } lpSystemExpressEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Ethernet Express ethernet ports present in the system." ::= { lpSystem 22 } lpSystemPowerSupplyCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of power supply units present in the system." ::= { lpSystem 23 } lpSystemAction OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LANplex system." ::= { lpSystem 24 } lpSystemBridgeFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switching modules in the system." ::= { lpSystem 25 } lpSystemSmtProxyTimeoutBase OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt three retries before determining that the proxied station is not answering, with the timeout doubling for each retry, the total time for a request to time out is equal to seven times the base timeout value." ::= { lpSystem 26 } lpSystemSmtProxyEvents OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1)." ::= { lpSystem 27 } -- The lanplex Slot Table lpSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF LpSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of slot entries. A single instance of this object exists for each slot in the LANplex system." ::= { lpSlot 1 } lpSlotEntry OBJECT-TYPE SYNTAX LpSlotEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A slot entry contains information common to a given slot within a LANplex system." INDEX { lpSlotIndex } ::= { lpSlotTable 1 } LpSlotEntry ::= SEQUENCE { lpSlotIndex INTEGER, lpSlotBoardType INTEGER, lpSlotBoardRevision OCTET STRING, lpSlotBoardStatus INTEGER, lpSlotBoardName DisplayString, lpSlotBoardNameAbbrev DisplayString, lpSlotFddiMacCount INTEGER, lpSlotFddiMacBaseIndex INTEGER, lpSlotFddiPortCount INTEGER, lpSlotFddiPortBaseIndex INTEGER, lpSlotEthernetPortCount INTEGER, lpSlotEthernetPortBaseIndex INTEGER, lpSlotExpressFunctionCount INTEGER, lpSlotExpressFunctionBaseIndex INTEGER, lpSlotExpressFddiPortCount INTEGER, lpSlotExpressFddiPortBaseIndex INTEGER, lpSlotExpressEthernetPortCount INTEGER, lpSlotExpressEthernetPortBaseIndex INTEGER, lpSlotBoardAction INTEGER, lpSlotBridgeFunctionCount INTEGER, lpSlotBridgeFunctionBaseIndex INTEGER } lpSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical slot number of this slot within the system." ::= { lpSlotEntry 1 } lpSlotBoardType OBJECT-TYPE SYNTAX INTEGER { unknown(1), emptySlot(2), spm(3), feam(4), fcm(5), eem(6), esm(7), fcm2(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of board residing in this slot." ::= { lpSlotEntry 2 } lpSlotBoardRevision OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "The revision number of the board in this slot." ::= { lpSlotEntry 3 } lpSlotBoardStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), testing(2), offline(3), online(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The status of the board in this slot." ::= { lpSlotEntry 4 } lpSlotBoardName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "The text string describing this board." ::= { lpSlotEntry 5 } lpSlotBoardNameAbbrev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The abbreviation used to describe this board." ::= { lpSlotEntry 6 } lpSlotFddiMacCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI MAC's present in this slot." ::= { lpSlotEntry 7 } lpSlotFddiMacBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first FDDI MAC in this slot." ::= { lpSlotEntry 8 } lpSlotFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of FDDI ports present in this slot." ::= { lpSlotEntry 9 } lpSlotFddiPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first FDDI port in this slot." ::= { lpSlotEntry 10 } lpSlotEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ethernet ports present in this slot." ::= { lpSlotEntry 11 } lpSlotEthernetPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first ethernet port in this slot." ::= { lpSlotEntry 12 } lpSlotExpressFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Express functions present in this slot." ::= { lpSlotEntry 13 } lpSlotExpressFunctionBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the first Express function in this slot." ::= { lpSlotEntry 14 } lpSlotExpressFddiPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Express FDDI ports present in this slot." ::= { lpSlotEntry 15 } lpSlotExpressFddiPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the first Express FDDI port in this slot." ::= { lpSlotEntry 16 } lpSlotExpressEthernetPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The number of Express ethernet ports present in this slot." ::= { lpSlotEntry 17 } lpSlotExpressEthernetPortBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of the first Express ethernet port in this slot." ::= { lpSlotEntry 18 } lpSlotBoardAction OBJECT-TYPE SYNTAX INTEGER { other(1), runDiagnostics(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics." ::= { lpSlotEntry 19 } lpSlotBridgeFunctionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of bridge functions present in this slot." ::= { lpSlotEntry 20 } lpSlotBridgeFunctionBaseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the first bridge function in this slot." ::= { lpSlotEntry 21 } -- FDDI MAC group lpFddiMacTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFddiMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of FDDI MAC entries. A single instance of this object exists for each FDDI MAC present in the system." ::= { lpFddiMac 1 } lpFddiMacEntry OBJECT-TYPE SYNTAX LpFddiMacEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An FDDI MAC entry contains information common to a particular FDDI MAC within the system." INDEX { lpFddiMacIndex } ::= { lpFddiMacTable 1 } LpFddiMacEntry ::= SEQUENCE { lpFddiMacIndex INTEGER, lpFddiMacSlotIndex INTEGER, lpFddiMacLocalIndex INTEGER, lpFddiMacByteReceiveRate INTEGER, lpFddiMacPeakByteReceiveRate INTEGER, lpFddiMacFrameReceiveRate INTEGER, lpFddiMacPeakFrameReceiveRate INTEGER, lpFddiMacByteTransmitRate INTEGER, lpFddiMacPeakByteTransmitRate INTEGER, lpFddiMacFrameTransmitRate INTEGER, lpFddiMacPeakFrameTransmitRate INTEGER, lpFddiMacReceiveMulticastThreshold INTEGER, lpFddiMacBeaconHistory OCTET STRING } lpFddiMacIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each FDDI MAC in the system. The MAC identified by a particular value of this index is the same MAC as identified by the same value of ifIndex." ::= { lpFddiMacEntry 1 } lpFddiMacSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this MAC." ::= { lpFddiMacEntry 2 } lpFddiMacLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this MAC relative to the slot on which it is physically present." ::= { lpFddiMacEntry 3 } lpFddiMacByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes received per second by this MAC during the most recent sampling period." ::= { lpFddiMacEntry 4 } lpFddiMacPeakByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpFddiMacByteReceiveRate for this MAC since the system was last initialized." ::= { lpFddiMacEntry 5 } lpFddiMacFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames received per second by this MAC during the most recent sampling period." ::= { lpFddiMacEntry 6 } lpFddiMacPeakFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpFddiMacFrameReceiveRate for this MAC since the system was last initialized." ::= { lpFddiMacEntry 7 } lpFddiMacByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes transmitted per second by this MAC during the most recent sampling period." ::= { lpFddiMacEntry 8 } lpFddiMacPeakByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpFddiMacByteTransmitRate for this MAC since the system was last initialized." ::= { lpFddiMacEntry 9 } lpFddiMacFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames transmitted per second by this MAC during the most recent sampling period." ::= { lpFddiMacEntry 10 } lpFddiMacPeakFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpFddiMacFrameTransmitRate for this MAC since the system was last initialized." ::= { lpFddiMacEntry 11 } lpFddiMacReceiveMulticastThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate." ::= { lpFddiMacEntry 12 } lpFddiMacBeaconHistory OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "This object gives a history of the most recent beacon information received on this MAC. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes." ::= { lpFddiMacEntry 13 } -- Ethernet Port group lpEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEthernetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of ethernet port entries. A single instance of this object exists for each ethernet port present in the system." ::= { lpEthernetPort 1 } lpEthernetPortEntry OBJECT-TYPE SYNTAX LpEthernetPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An ethernet port entry contains information common to a particular ethernet port within the system." INDEX { lpEthernetPortIndex } ::= { lpEthernetPortTable 1 } LpEthernetPortEntry ::= SEQUENCE { lpEthernetPortIndex INTEGER, lpEthernetPortSlotIndex INTEGER, lpEthernetPortLocalIndex INTEGER, lpEthernetPortLabel DisplayString, lpEthernetPortChipsetType INTEGER, lpEthernetPortLinkStatus INTEGER, lpEthernetPortByteReceiveRate INTEGER, lpEthernetPortPeakByteReceiveRate INTEGER, lpEthernetPortFrameReceiveRate INTEGER, lpEthernetPortPeakFrameReceiveRate INTEGER, lpEthernetPortByteTransmitRate INTEGER, lpEthernetPortPeakByteTransmitRate INTEGER, lpEthernetPortFrameTransmitRate INTEGER, lpEthernetPortPeakFrameTransmitRate INTEGER, lpEthernetPortReceiveMulticastThreshold INTEGER, lpEthernetPortType INTEGER } lpEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each ethernet port in the system. The port identified by a particular value of this index is the same port as identified by the same value of ifIndex." ::= { lpEthernetPortEntry 1 } lpEthernetPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lpEthernetPortEntry 2 } lpEthernetPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lpEthernetPortEntry 3 } lpEthernetPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII text string describing this port." ::= { lpEthernetPortEntry 4 } lpEthernetPortChipsetType OBJECT-TYPE SYNTAX INTEGER { other(1), chipsetAMD79900(2), chipsetIntel82586(3), chipsetIntel82596(4), chipsetSEEQ8003(5), chipsetNational8390(6), chipsetNationalSonic(7), chipsetFujitsu86950(8) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of chipset used to implement this port." ::= { lpEthernetPortEntry 5 } lpEthernetPortLinkStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inActive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current value of the link status for this port." ::= { lpEthernetPortEntry 6 } lpEthernetPortByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes received per second by this port during the most recent sampling period." ::= { lpEthernetPortEntry 7 } lpEthernetPortPeakByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpEthernetPortByteReceiveRate for this port since the system was last initialized." ::= { lpEthernetPortEntry 8 } lpEthernetPortFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames received per second by this port during the most recent sampling period." ::= { lpEthernetPortEntry 9 } lpEthernetPortPeakFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpEthernetPortFrameReceiveRate for this port since the system was last initialized." ::= { lpEthernetPortEntry 10 } lpEthernetPortByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes transmitted per second by this port during the most recent sampling period." ::= { lpEthernetPortEntry 11 } lpEthernetPortPeakByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpEthernetPortByteTransmitRate for this port since the system was last initialized." ::= { lpEthernetPortEntry 12 } lpEthernetPortFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames transmitted per second by this port during the most recent sampling period." ::= { lpEthernetPortEntry 13 } lpEthernetPortPeakFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of lpEthernetPortFrameTransmitRate for this port since the system was last initialized." ::= { lpEthernetPortEntry 14 } lpEthernetPortReceiveMulticastThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is four seconds. The default value for this object is zero which implies an infinite rate." ::= { lpEthernetPortEntry 15 } lpEthernetPortType OBJECT-TYPE SYNTAX INTEGER { telco10BaseT(1), rj4510BaseT(2), foirl(3), aui(4), other(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Specific description of this port's type." ::= { lpEthernetPortEntry 16 } -- FDDI port group lpFddiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LpFddiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of FDDI port entries. A single instance of this object exists for each FDDI port in the system." ::= { lpFddiPort 1 } lpFddiPortEntry OBJECT-TYPE SYNTAX LpFddiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Port entry contains information common to a particular FDDI port in the system." INDEX { lpFddiPortIndex } ::= { lpFddiPortTable 1 } LpFddiPortEntry ::= SEQUENCE { lpFddiPortIndex INTEGER, lpFddiPortSlotIndex INTEGER, lpFddiPortLocalIndex INTEGER, lpFddiPortLabel DisplayString } lpFddiPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each FDDI port in the system. It's value ranges between 1 and the value of lpSystemFddiPortCount." ::= { lpFddiPortEntry 1 } lpFddiPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lpFddiPortEntry 2 } lpFddiPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lpFddiPortEntry 3 } lpFddiPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII text string describing this port." ::= { lpFddiPortEntry 4 } -- Express Function group lpExpressTable OBJECT-TYPE SYNTAX SEQUENCE OF LpExpressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express function entries." ::= { lpExpress 1 } lpExpressEntry OBJECT-TYPE SYNTAX LpExpressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An Express entry contains information common to a particular Express function in a given system." INDEX { lpExpressIndex } ::= { lpExpressTable 1 } LpExpressEntry ::= SEQUENCE { lpExpressIndex INTEGER, lpExpressSlotIndex INTEGER, lpExpressLocalIndex INTEGER, lpExpressAddressThreshold INTEGER } lpExpressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each Express function in the system. It's value ranges between 1 and the value of lpSystemExpressFunctionCount." ::= { lpExpressEntry 1 } lpExpressSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this function." ::= { lpExpressEntry 2 } lpExpressLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of this function relative to the slot on which it is physically present." ::= { lpExpressEntry 3 } lpExpressAddressThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached, the event lpEemAddressThresholdEvent is generated." ::= { lpExpressEntry 4 } -- Express FDDI Port group lpExpressFddiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LpExpressFddiPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express FDDI port entries." ::= { lpExpressFddiPort 1 } lpExpressFddiPortEntry OBJECT-TYPE SYNTAX LpExpressFddiPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A Port entry contains information for a particular Express FDDI port in a given system." INDEX { lpExpressFddiPortIndex } ::= { lpExpressFddiPortTable 1 } LpExpressFddiPortEntry ::= SEQUENCE { lpExpressFddiPortIndex INTEGER, lpExpressFddiPortSlotIndex INTEGER, lpExpressFddiPortLocalIndex INTEGER, lpExpressFddiPortForwardedCts Counter, lpExpressFddiPortDroppedCts Counter } lpExpressFddiPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each Express port in the system. It's value ranges between 1 and the value of lpSystemExpressFddiPortCount." ::= { lpExpressFddiPortEntry 1 } lpExpressFddiPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lpExpressFddiPortEntry 2 } lpExpressFddiPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lpExpressFddiPortEntry 3 } lpExpressFddiPortForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames forwarded by this MAC from an ethernet port to the FDDI network." ::= { lpExpressFddiPortEntry 4 } lpExpressFddiPortDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames received by this MAC that were not forwarded." ::= { lpExpressFddiPortEntry 5 } -- Express Ethernet Port group lpExpressEthernetPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LpExpressEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express ethernet port entries." ::= { lpExpressEthernetPort 1 } lpExpressEthernetPortEntry OBJECT-TYPE SYNTAX LpExpressEthernetPortEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An Expres ethernet port entry contains information common to a particular Express ethernet port located in the system." INDEX { lpExpressEthernetPortIndex } ::= { lpExpressEthernetPortTable 1 } LpExpressEthernetPortEntry ::= SEQUENCE { lpExpressEthernetPortIndex INTEGER, lpExpressEthernetPortSlotIndex INTEGER, lpExpressEthernetPortLocalIndex INTEGER, lpExpressEthernetPortForwardedCts Counter, lpExpressEthernetPortDroppedCts Counter, lpExpressEthernetPortUTurnCts Counter, lpExpressEthernetPortAction INTEGER } lpExpressEthernetPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lpSystemExpressEthernetPortCount." ::= { lpExpressEthernetPortEntry 1 } lpExpressEthernetPortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lpExpressEthernetPortEntry 2 } lpExpressEthernetPortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The index of this port relative to the slot on which it is physically present." ::= { lpExpressEthernetPortEntry 3 } lpExpressEthernetPortForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames forwarded from this ethernet port to the FDDI network." ::= { lpExpressEthernetPortEntry 4 } lpExpressEthernetPortDroppedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames received by this ethernet port that were not forwarded or u-turned." ::= { lpExpressEthernetPortEntry 5 } lpExpressEthernetPortUTurnCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The number of frames received by this ethernet port that were directed to another ethernet port." ::= { lpExpressEthernetPortEntry 6 } lpExpressEthernetPortAction OBJECT-TYPE SYNTAX INTEGER { other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list." ::= { lpExpressEthernetPortEntry 7 } -- Express Ethernet port Address Table lpExpressEthernetPortAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF LpExpressEthernetPortAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Express Remote MAC Address entries." ::= { lpExpressEthernetPortAddress 1 } lpExpressEthernetPortAddressEntry OBJECT-TYPE SYNTAX LpExpressEthernetPortAddressEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry contains information describing a remote Ethernet MAC detected to be attached to an Express port." INDEX { lpExpressEthernetPortAddressPortIndex, lpExpressEthernetPortAddressIndex } ::= { lpExpressEthernetPortAddressTable 1 } LpExpressEthernetPortAddressEntry ::= SEQUENCE { lpExpressEthernetPortAddressPortIndex INTEGER, lpExpressEthernetPortAddressIndex INTEGER, lpExpressEthernetPortAddressSlotIndex INTEGER, lpExpressEthernetPortAddressType INTEGER, lpExpressEthernetPortAddressRemoteAddress OCTET STRING, lpExpressEthernetPortAddressIsStatic INTEGER, lpExpressEthernetPortAddressStaticPort INTEGER, lpExpressEthernetPortAddressAge INTEGER } lpExpressEthernetPortAddressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lpSystemExpressEthernetPortCount." ::= { lpExpressEthernetPortAddressEntry 1 } lpExpressEthernetPortAddressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The index of this address entry within the address table." ::= { lpExpressEthernetPortAddressEntry 2 } lpExpressEthernetPortAddressSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lpExpressEthernetPortAddressEntry 3 } lpExpressEthernetPortAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table." ::= { lpExpressEthernetPortAddressEntry 4 } lpExpressEthernetPortAddressRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS deprecated DESCRIPTION "The remote MAC address detected on this port." ::= { lpExpressEthernetPortAddressEntry 5 } lpExpressEthernetPortAddressIsStatic OBJECT-TYPE SYNTAX INTEGER { isStatic(1), isDynamic(2) } ACCESS read-write STATUS deprecated DESCRIPTION "A value indicating whether this MAC address was statically configured or was dynamically learned on this port." ::= { lpExpressEthernetPortAddressEntry 6 } lpExpressEthernetPortAddressStaticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "If the object lpExpressEthernetPortAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured." ::= { lpExpressEthernetPortAddressEntry 7 } lpExpressEthernetPortAddressAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "This object indicates the time, in seconds, elapsed since this MAC address was added to this port's address table." ::= { lpExpressEthernetPortAddressEntry 8 } -- Power Supply group lpPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF LpPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of power supply entries." ::= { lpPowerSupply 1 } lpPowerSupplyEntry OBJECT-TYPE SYNTAX LpPowerSupplyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A power supply entry contains information common for a particular power supply unit in the system." INDEX { lpPowerSupplyIndex } ::= { lpPowerSupplyTable 1 } LpPowerSupplyEntry ::= SEQUENCE { lpPowerSupplyIndex INTEGER, lpPowerSupplyLocation INTEGER, lpPowerSupplyStatus INTEGER, lpPowerSupplyFailureType INTEGER, lpPowerSupplyLastFailure INTEGER } lpPowerSupplyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each power supply in the system. It's value ranges between 1 and the value of lpSystemPowerSupplyCount." ::= { lpPowerSupplyEntry 1 } lpPowerSupplyLocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical slot in which this power supply unit resides in the system." ::= { lpPowerSupplyEntry 2 } lpPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The status of the power supply. A value of 0 indicates a working unit. A non-zero value represents a bit mask of the possible failure types. Each set bit indicates the following failure type: bit0: systemAcFailure bit1: systemPlus5Failure bit2: systemPlus12Failure bit3: systemOverTemperatureFailure." ::= { lpPowerSupplyEntry 3 } lpPowerSupplyFailureType OBJECT-TYPE SYNTAX INTEGER { systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4) } ACCESS not-accessible STATUS deprecated DESCRIPTION "This object is sent in the varlist when the lpPowerSupplyFailureEvent trap is generated. It indicates the particular failure type that caused this trap to be generated." ::= { lpPowerSupplyEntry 4 } lpPowerSupplyLastFailure OBJECT-TYPE SYNTAX INTEGER { systemAcFailure(1), systemPlus5Failure(2), systemPlus12Failure(3), systemOverTemperatureFailure(4), none(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the most recent power supply failure type. If no failure has occured, the value of this object is none. This object is included in the varlist when the lpPowerSupplyFailureEvent trap is generated. It indicates the failure type that caused the trap to be generated." ::= { lpPowerSupplyEntry 5 } -- Bridge Function Group lpBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF LpBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of bridge function entries." ::= { lpBridge 1 } lpBridgeEntry OBJECT-TYPE SYNTAX LpBridgeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A bridge entry contains information common to a particular bridge function in a given system." INDEX { lpBridgeIndex } ::= { lpBridgeTable 1 } LpBridgeEntry ::= SEQUENCE { lpBridgeIndex INTEGER, lpBridgeBaseSlotIndex INTEGER, lpBridgePortCount INTEGER, lpBridgeAddressTableSize INTEGER, lpBridgeAddressThreshold INTEGER, lpBridgeMode INTEGER, lpBridgeLocalIndex INTEGER } lpBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount." ::= { lpBridgeEntry 1 } lpBridgeBaseSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number of the lowest numbered slot which contains a physical port that this bridge function controls." ::= { lpBridgeEntry 2 } lpBridgePortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ports that this bridge function controls." ::= { lpBridgeEntry 3 } lpBridgeAddressTableSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the address table for this bridge function." ::= { lpBridgeEntry 4 } lpBridgeAddressThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lpBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lpBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lpBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lpBridgeAddressThresholdEvents since the limit will never be reached." ::= { lpBridgeEntry 5 } lpBridgeMode OBJECT-TYPE SYNTAX INTEGER { expressMode(1), ieee8021dBridgeMode(2), notSupported(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The operational mode of this bridge function. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation." ::= { lpBridgeEntry 6 } lpBridgeLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this bridge function relative to the slot on which it is physically present." ::= { lpBridgeEntry 7 } -- Bridge Port Table lpBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF LpBridgePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of bridge port entries." ::= { lpBridge 2 } lpBridgePortEntry OBJECT-TYPE SYNTAX LpBridgePortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Port entry contains information for a particular bridge port in a given system." INDEX { lpBridgePortBridgeIndex, lpBridgePortIndex } ::= { lpBridgePortTable 1 } LpBridgePortEntry ::= SEQUENCE { lpBridgePortBridgeIndex INTEGER, lpBridgePortIndex INTEGER, lpBridgePortSlotIndex INTEGER, lpBridgePortLocalIndex INTEGER, lpBridgePortType INTEGER, lpBridgePortIpFragmentationEnabled INTEGER, lpBridgePortReceiveMulticastLimit INTEGER, lpBridgePortAddressAction INTEGER, lpBridgePortTotalForwardedCts Counter, lpBridgePortManagementFramesReceived Counter, lpBridgePortTotalDiscards Counter, lpBridgePortReceiveBlockedDiscards Counter, lpBridgePortReceiveMulticastLimitExceededs Counter, lpBridgePortReceiveSecurityDiscards Counter, lpBridgePortReceiveUnknownDiscards Counter, lpBridgePortReceiveOtherDiscards Counter, lpBridgePortReceiveErrorDiscards Counter, lpBridgePortSameSegmentDiscards Counter, lpBridgePortTransmitBlockedDiscards Counter, lpBridgePortTotalFiltered Counter, lpBridgePortReceiveUnicastFiltered Counter, lpBridgePortReceiveMulticastFiltered Counter, lpBridgePortTransmitUnicastFiltered Counter, lpBridgePortTransmitMulticastFiltered Counter, lpBridgePortReceiveMulticastLimitExceededCount Counter } lpBridgePortBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount." ::= { lpBridgePortEntry 1 } lpBridgePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references." ::= { lpBridgePortEntry 2 } lpBridgePortSlotIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot number corresponding to the physical location of this port." ::= { lpBridgePortEntry 3 } lpBridgePortLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this port relative to the slot on which it is physically present and its port type. For example FDDI ports in a slot are identified with local indices from 1 to the number of FDDI ports in that slot, and the Ethernet ports in the same slot are identified with local indices from 1 to the number of Ethernet ports in that slot." ::= { lpBridgePortEntry 4 } lpBridgePortType OBJECT-TYPE SYNTAX INTEGER { ethernet(1), fddi(2), other(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of this port." ::= { lpBridgePortEntry 5 } lpBridgePortIpFragmentationEnabled OBJECT-TYPE SYNTAX INTEGER { true(1), false(2), notSupported(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag indicating whether or not IP fragmentation is enabled on this bridge port. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation." ::= { lpBridgePortEntry 6 } lpBridgePortReceiveMulticastLimit OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate." ::= { lpBridgePortEntry 7 } lpBridgePortAddressAction OBJECT-TYPE SYNTAX INTEGER { other(1), freezeAddress(2), flushAddress(3), flushDynamicAddress(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the port's address list. flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list." ::= { lpBridgePortEntry 8 } lpBridgePortTotalForwardedCts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames forwarded from this port to all other ports of this bridge. Note that the total forwarded count is NOT equal to the receive count minus the discard count, as a single received multicast/broadcast frame can be forwarded to multiple bridge ports. Also frames which are 'flooded' because of unknown destination addresses account for multiple forwarding as well. The total forwarding count is the instantaneous sumation of the 'forwarded to' counts to all other ports of the bridge." ::= { lpBridgePortEntry 9 } lpBridgePortManagementFramesReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of bridge management frames received by this port." ::= { lpBridgePortEntry 10 } lpBridgePortTotalDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames discarded by this port." ::= { lpBridgePortEntry 11 } lpBridgePortReceiveBlockedDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the the receiving bridge port was not in the 'forwarding' state." ::= { lpBridgePortEntry 12 } lpBridgePortReceiveMulticastLimitExceededs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of multicast/broadcast frames discarded by this port because the lpBridgePortReceiveMulticastLimit was exceeded." ::= { lpBridgePortEntry 13 } lpBridgePortReceiveSecurityDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved." ::= { lpBridgePortEntry 14 } lpBridgePortReceiveUnknownDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the destination address was unknown. Note that this counter is only valid for FDDI ports, and only when the bridge is an EEM, or an ESM operating in express mode." ::= { lpBridgePortEntry 15 } lpBridgePortReceiveOtherDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops)." ::= { lpBridgePortEntry 16 } lpBridgePortReceiveErrorDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because of internal bridge system errors (e.g., hardware and software address table discrepencies)." ::= { lpBridgePortEntry 17 } lpBridgePortSameSegmentDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged." ::= { lpBridgePortEntry 18 } lpBridgePortTransmitBlockedDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port because the the transmitting bridge port was not in the 'forwarding' state." ::= { lpBridgePortEntry 19 } lpBridgePortTotalFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of frames discarded by this port due to user defined filters." ::= { lpBridgePortEntry 20 } lpBridgePortReceiveUnicastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined receive path filters." ::= { lpBridgePortEntry 21 } lpBridgePortReceiveMulticastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined receive multicast path filters." ::= { lpBridgePortEntry 22 } lpBridgePortTransmitUnicastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined transmit path filters." ::= { lpBridgePortEntry 23 } lpBridgePortTransmitMulticastFiltered OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames discarded by this port due to user defined transmit multicast path filters." ::= { lpBridgePortEntry 24 } lpBridgePortReceiveMulticastLimitExceededCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the lpBridgePortReceiveMulticastLimit was exceeded." ::= { lpBridgePortEntry 25 } -- Bridge Port Forwarded-To Table lpBridgePortForwardedToTable OBJECT-TYPE SYNTAX SEQUENCE OF LpBridgePortForwardedToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port forwarding count information." ::= { lpBridge 3 } lpBridgePortForwardedToEntry OBJECT-TYPE SYNTAX LpBridgePortForwardedToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A bridge port forwarded-to entry contains information on the count of frames forwarded from the receiving port indicated by the corresponding lpBridgePortForwardedToReceivePortIndex, to the destination port indicated by the corresponding lpBridgePortForwardedToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lpBridgePortForwardedToReceivePortIndex and the lpBridgePortForwardedToDstPortIndex objects." INDEX { lpBridgePortForwardedToBridgeIndex, lpBridgePortForwardedToReceivePortIndex, lpBridgePortForwardedToDstPortIndex } ::= { lpBridgePortForwardedToTable 1 } LpBridgePortForwardedToEntry ::= SEQUENCE { lpBridgePortForwardedToBridgeIndex INTEGER, lpBridgePortForwardedToReceivePortIndex INTEGER, lpBridgePortForwardedToDstPortIndex INTEGER, lpBridgePortForwardedToCount Counter } lpBridgePortForwardedToBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount." ::= { lpBridgePortForwardedToEntry 1 } lpBridgePortForwardedToReceivePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is forwarding frames." ::= { lpBridgePortForwardedToEntry 2 } lpBridgePortForwardedToDstPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being forwarded." ::= { lpBridgePortForwardedToEntry 3 } lpBridgePortForwardedToCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of frames forwarded from the receiving port to the destination port." ::= { lpBridgePortForwardedToEntry 4 } -- Bridge Port Filtered-To Table lpBridgePortFilteredToTable OBJECT-TYPE SYNTAX SEQUENCE OF LpBridgePortFilteredToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port filtering count information." ::= { lpBridge 4 } lpBridgePortFilteredToEntry OBJECT-TYPE SYNTAX LpBridgePortFilteredToEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A bridge port filtered-to entry contains information on the count of frames filtered from the receiving port indicated by the corresponding lpBridgePortFilteredToReceivePortIndex, to the destination port indicated by the corresponding lpBridgePortFilteredToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lpBridgePortFilteredToReceivePortIndex and the lpBridgePortFilteredToDstPortIndex objects." INDEX { lpBridgePortFilteredToBridgeIndex, lpBridgePortFilteredToReceivePortIndex, lpBridgePortFilteredToDstPortIndex } ::= { lpBridgePortFilteredToTable 1 } LpBridgePortFilteredToEntry ::= SEQUENCE { lpBridgePortFilteredToBridgeIndex INTEGER, lpBridgePortFilteredToReceivePortIndex INTEGER, lpBridgePortFilteredToDstPortIndex INTEGER, lpBridgePortFilteredToCount Counter } lpBridgePortFilteredToBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount." ::= { lpBridgePortFilteredToEntry 1 } lpBridgePortFilteredToReceivePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is filtering frames." ::= { lpBridgePortFilteredToEntry 2 } lpBridgePortFilteredToDstPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being filtered." ::= { lpBridgePortFilteredToEntry 3 } lpBridgePortFilteredToCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of frames filtered from the receiving port to the destination port." ::= { lpBridgePortFilteredToEntry 4 } -- Bridge Port AddressTable lpBridgePortAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF LpBridgePortAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of bridge port address entries." ::= { lpBridge 5 } lpBridgePortAddressEntry OBJECT-TYPE SYNTAX LpBridgePortAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An bridge port address entry contains information about particular bridge port address in a given system." INDEX { lpBridgePortAddressBridgeIndex, lpBridgePortAddressPortIndex, lpBridgePortAddressIndex } ::= { lpBridgePortAddressTable 1 } LpBridgePortAddressEntry ::= SEQUENCE { lpBridgePortAddressBridgeIndex INTEGER, lpBridgePortAddressPortIndex INTEGER, lpBridgePortAddressIndex INTEGER, lpBridgePortAddressRemoteAddress OCTET STRING, lpBridgePortAddressType INTEGER, lpBridgePortAddressIsStatic INTEGER, lpBridgePortAddressStaticPort INTEGER, lpBridgePortAddressAge INTEGER } lpBridgePortAddressBridgeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge function in the system. It's value ranges between 1 and the value of lpSystemBridgeFunctionCount." ::= { lpBridgePortAddressEntry 1 } lpBridgePortAddressPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lpBridgePortCount for the bridge function which this entry references." ::= { lpBridgePortAddressEntry 2 } lpBridgePortAddressIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this address entry within the bridge address table." ::= { lpBridgePortAddressEntry 3 } lpBridgePortAddressRemoteAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-write STATUS mandatory DESCRIPTION "The remote MAC address detected on the port corresponding to this entry. Setting this object attempts to create a new entry in the table. Since the value of lpBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lpBridgePortAddressIndex is zero. A get-next using the values of lpBridgePortAddressBridgeIndex and lpBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry." ::= { lpBridgePortAddressEntry 4 } lpBridgePortAddressType OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table." ::= { lpBridgePortAddressEntry 5 } lpBridgePortAddressIsStatic OBJECT-TYPE SYNTAX INTEGER { isStatic(1), isDynamic(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A value indicating whether this MAC address was statically configured or was dynamically learned." ::= { lpBridgePortAddressEntry 6 } lpBridgePortAddressStaticPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If the object lpBridgePortAddressIsStatic has value isStatic(1), this object indicates the local port index (as reported by lpBridgePortLocalIndex) for which this MAC address was statically configured. If the object lpBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0." ::= { lpBridgePortAddressEntry 7 } lpBridgePortAddressAge OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the port corresponding to this entry." ::= { lpBridgePortAddressEntry 8 } -- Trap Enterprise Table lpTrapEnterpriseTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrapEnterpriseTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains a listing of enterprises under which various traps are defined. In all cases except for the MIB-II generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap. Associated with each trap enterprise is a trap enterprise index." ::= { lpTrapEnterprise 1 } lpTrapEnterpriseTableEntry OBJECT-TYPE SYNTAX LpTrapEnterpriseTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information relating a specific trap enterprise OID with a trap enterprise index." INDEX { lpTrapEnterpriseIndex } ::= { lpTrapEnterpriseTable 1 } LpTrapEnterpriseTableEntry ::= SEQUENCE { lpTrapEnterpriseIndex INTEGER, lpTrapEnterpriseOID OBJECT IDENTIFIER } lpTrapEnterpriseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique index corresponding to a particular enterprise OID under which traps are defined. This value of this object corresponding to a particular enterprise OID will remain constant accross system resets." ::= { lpTrapEnterpriseTableEntry 1 } lpTrapEnterpriseOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "An enterpise OID under which traps are defined." ::= { lpTrapEnterpriseTableEntry 2 } -- Trap Destination Table lpTrapDestTable OBJECT-TYPE SYNTAX SEQUENCE OF LpTrapDestTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information specifying which traps will be transmitted by the LANplex to a given destination address. The table is indexed by the destination address, the index of the enterprise which generates the trap, and the trap number. Each entry in the table with a status of valid identifies a trap which, when generated, will be transmitted to the corresponding destination address listed in that entry." ::= { lpTrapDest 1 } lpTrapDestTableEntry OBJECT-TYPE SYNTAX LpTrapDestTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information relating a trap with a destination address to which the trap will be sent when it is generated." INDEX { lpTrapDestAddr, lpTrapDestEnterpriseIndex, lpTrapNumber } ::= { lpTrapDestTable 1 } LpTrapDestTableEntry ::= SEQUENCE { lpTrapDestAddr NetworkAddress, lpTrapDestEnterpriseIndex INTEGER, lpTrapNumber INTEGER, lpTrapEntryStatus INTEGER } lpTrapDestAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "The network address to which the trap identified by this entry is to be transmitted." ::= { lpTrapDestTableEntry 1 } lpTrapDestEnterpriseIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The enterprise index of the enterprise identified in this entry. The value of this object is the same as the lpTrapEnterpriseIndex value for a given enterprise." ::= { lpTrapDestTableEntry 2 } lpTrapNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the trap within the corresponding enterprise for this entry." ::= { lpTrapDestTableEntry 3 } lpTrapEntryStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the trap destination table entry. Setting this object to valid has the effect of attempting to add the row corresponding to the instance specified. If the instance already exists, the set is successful (with no new entry added). If the instance specified is invalid, the set fails, otherwise the set succeeds and results in a new entry being added to the table. Setting this object to invalid has the effect of removing the corresponding entry from the table." ::= { lpTrapDestTableEntry 4 } -- lanplex MIB traps lpSlotInsertEvent TRAP-TYPE ENTERPRISE lanplexMib VARIABLES { lpSlotIndex, lpSlotBoardType, lpSlotBoardRevision } DESCRIPTION "The SNMP trap that is generated when a board is inserted into a particular slot in the chassis." ::= 1 lpSlotExtractEvent TRAP-TYPE ENTERPRISE lanplexMib VARIABLES { lpSlotIndex } DESCRIPTION "The SNMP trap that is generated when a board is extracted from a particular slot in the chassis." ::= 2 lpBridgeAddressThresholdEvent TRAP-TYPE ENTERPRISE lanplexMib VARIABLES { lpBridgeIndex, lpBridgeBaseSlotIndex } DESCRIPTION "The SNMP trap that is generated when the number of addresses stored in the bridge reaches lpBridgeAddressThreshold." ::= 3 -- The lpBridgePortAddressLearnedEvent and the lpBridgePortAddressForgottenEvent -- traps are obsolete and are no longer supported. lpSystemOverTemperatureEvent TRAP-TYPE ENTERPRISE lanplexMib DESCRIPTION "The SNMP trap that is generated when the system temperature exceeds a certain threshold." ::= 6 lpSlotOverTemperatureEvent TRAP-TYPE ENTERPRISE lanplexMib VARIABLES { lpSlotIndex, lpSlotBoardType, lpSlotBoardRevision, lpSlotBoardStatus } DESCRIPTION "The SNMP trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold." ::= 7 lpPowerSupplyFailureEvent TRAP-TYPE ENTERPRISE lanplexMib VARIABLES { lpPowerSupplyIndex, lpPowerSupplyLocation, lpPowerSupplyLastFailure, lpSystemPowerSupplyCount} DESCRIPTION "The SNMP trap that is generated when a power supply unit fails in the system." ::= 8 END