AWCVX-MIB device MIB details by Telesystems SLW Inc
AWCVX-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing AWCVX-MIB.
| Vendor: | Telesystems SLW Inc |
|---|---|
| Mib: | AWCVX-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- ***************************************************************** -- AWCVX-MIB.my: Cisco Aironet Wireless LAN Access Point MIB file -- -- October 2002, Victor Griswold -- -- Copyright (c) 2002-2003 by Cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- ******************************************************************** -- * awcVx Management Information Base -- ******************************************************************** AWCVX-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Integer32, Counter32, IpAddress, Unsigned32 FROM SNMPv2-SMI dot1dTpPort FROM BRIDGE-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString, RowStatus, MacAddress, TruthValue FROM SNMPv2-TC ifIndex FROM RFC1213-MIB; -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** awcVx MODULE-IDENTITY LAST-UPDATED "200304210000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-aironet@cisco.com" DESCRIPTION "The MIB module for Aironet entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).aironet(522).awcVx(3). This MIB provides network management support for Cisco IEEE 802.11 Wireless LAN type devices such as Access Point and Wireless Access Bridge." REVISION "200304210000Z" DESCRIPTION "Added awcDot11NonRootMobility to determine if a radio should look for a better parent AP in heavy traffic and awcFtEnableMcastMapping for multicast forwarding configuration." REVISION "200212030000Z" DESCRIPTION "This revision adds awcDot11QoSTable QoS support, awcIfOutDiscardsCoSx statistics to awcIfTable, awcPolGrpTable policy group, 802.11A 5GHz radio support, and action when Ethernet is lost. Corrected the ranges for awcDot11AuthenticationAlgorithmsIndex and awcPolGrpId." ::= { enterprises 522 3 } aironet OBJECT IDENTIFIER ::= { enterprises 522 } -- ******************************************************************** -- * Major sections -- ******************************************************************** -- Aironet Wireless Communications System (awcSystem) Attributes -- DEFINED AS "The awcSystem object class provides all -- standard information to support operation of an Aironet -- Access Point such as versions, system flags, and what -- features are enabled."; awcSystem OBJECT IDENTIFIER ::= {awcVx 1} -- bootconfig VxWorks (bootconfigVx) Attributes -- DEFINED AS "The bootconfigVx object class provides all -- standard information to support operation of the boot -- server."; bootconfigVx OBJECT IDENTIFIER ::= {awcVx 2} -- Aironet Wireless Communication Serial Device (awcSerialDev) -- Attributes DEFINED AS "The awcSerialDev object class -- provides all standard information to support configuration -- of serial ports."; awcSerialDev OBJECT IDENTIFIER ::= {awcVx 3} -- Aironet Wireless Communication FTP (awcFtp) Attributes -- DEFINED AS "The awcFTP object class provides all standard -- information to support configuration of the FTP protocol."; awcFtp OBJECT IDENTIFIER ::= {awcVx 4} -- Aironet Wireless Communication 802.11 (awc802dot11) Attributes -- DEFINED AS "The awc802dot11 object class provides all -- standard information to support configuration of the 802.11 -- protocol. This class also provides various statistics of -- 802.11 stations."; awc802dot11 OBJECT IDENTIFIER ::= {awcVx 6} -- Aironet Wireless Communication UserManager (awcUserMgr) Attributes -- DEFINED AS "The awcUserMgr object class provides all -- standard information to support configuration of the User -- Manager."; awcUserMgr OBJECT IDENTIFIER ::= {awcVx 7} -- Aironet Wireless Communication HTTPd (awcHttpd) Attributes -- DEFINED AS "The awcHttpd object class provides all standard -- information to support configuration of the Web Server."; awcHttpd OBJECT IDENTIFIER ::= {awcVx 8} -- Aironet Wireless Communication DNS Resolver (awcDnsRes) Attributes -- DEFINED AS "The awcDnsRes object class provides all -- standard information to support configuration of the DNS -- Resolver."; awcDnsRes OBJECT IDENTIFIER ::= {awcVx 9} -- Aironet Wireless Communication SNMP (awcSnmp) Attributes -- DEFINED AS "The awcSnmp object class provides all standard -- information to support configuration of the SNMP -- protocol."; awcSnmp OBJECT IDENTIFIER ::= {awcVx 10} -- Aironet Wireless Communication SNTP (awcSntp) Attributes -- DEFINED AS "The awcSntp object class provides all standard -- information to support configuration of the SNTP -- protocol."; awcSntp OBJECT IDENTIFIER ::= {awcVx 11} -- Aironet Wireless Communication Forwarding Table (awcForwardTbl) -- Attributes -- DEFINED AS "The awcForwardTbl object class provides all -- standard information to support configuration of the -- Forwarding Table."; awcForwardTbl OBJECT IDENTIFIER ::= {awcVx 12} -- Aironet Wireless Communication RIP (awcRipConfig) Attributes -- DEFINED AS "The awcRipConfig object class provides all -- standard information to support configuration of the RIP -- Protocol."; awcRipConfig OBJECT IDENTIFIER ::= {awcVx 13} -- Aironet Wireless Communications Event Log (awcEventLog) Attributes -- DEFINED AS "The awcEventLog object class provides all -- standard information to support operation of the Event -- Log."; awcEventLog OBJECT IDENTIFIER ::= {awcVx 14} -- Aironet Wireless Communications Ethernet Controller (awcEtherMIB) -- Attributes -- DEFINED AS "The awcEtherMIB object class provides all -- standard information to support operation of the Ethernet -- Controller."; awcEtherMIB OBJECT IDENTIFIER ::= {awcVx 15} -- Aironet Wireless Communications Policy Groups (awcPolicyGroups) -- Attributes -- DEFINED AS "The awcPolicyGroups object class provides all -- standard information to support specification of named -- groups of related protocol filters."; awcPolicyGroups OBJECT IDENTIFIER ::= {awcVx 16} -- Aironet Wireless Communications DDP/IAPP (awcDdpIAPP) Attributes -- DEFINED AS "The awcDdpIAPP object class provides all -- standard information to support operation of the DDP and -- IAPP protocols."; awcDdpIAPP OBJECT IDENTIFIER ::= {awcVx 17} -- Aironet Wireless Communications Hot Standby (awcHotStandby) -- Attributes -- DEFINED AS "The awcHotStandby object class provides all -- standard information to support operation of an AP in the -- Hot Standby mode."; awcHotStandby OBJECT IDENTIFIER ::= {awcVx 18} -- Aironet Wireless Communications Authentication, Authorization, and -- Accounting (awcAaa) Attributes . -- DEFINED AS "The awcAaa object class provides all standard -- information to support configuration of RADIUS and TACACS+ -- client operation."; awcAaa OBJECT IDENTIFIER ::= {awcVx 19} -- Aironet Wireless Communications Authentication, Authorization, and -- Accounting (awcAaa)'s accounting configuration -- DEFINED AS "The awcAcctConfig object provides all the -- configuration for accounting."; awcAcctConfig OBJECT IDENTIFIER ::= { awcAaa 3 } -- Aironet Wireless Communications Protocol Filters -- (awcProtocolFilters) Attributes -- DEFINED AS "The awcProtocolFilters object class provides -- all standard information to support configuration of static -- protocol filters on the AP."; awcProtocolFilters OBJECT IDENTIFIER ::= {awcVx 20} -- Aironet Wireless Communications Mobile IP -- (awcMobileIP) Attributes -- DEFINED AS "The awcMobileIP object class provides -- all standard information to support configuration of proxy -- mobileIP on the AP."; awcMobileIP OBJECT IDENTIFIER ::= {awcVx 22} -- Aironet Wireless Communications Experimental (awcExperimental) -- Attributes -- DEFINED AS "The awcExperimental object class provides all -- standard information to support experimental functions."; -- awcExperimental OBJECT IDENTIFIER ::= {awcVx 99} -- ******************************************************************** -- * MIB attribute OBJECT-TYPE definitions follow -- ******************************************************************** AwcVlanId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 12-bit VLAN ID used in the VLAN Tag header. A value of 0 indicates NULL or no VLAN ID." SYNTAX INTEGER (0..4094) AwcPolId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 10-bit Policy Group identifier. A value of 0 indicates that no Policy Group is specified." SYNTAX INTEGER (0..1023) WEPKeytype128 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Wired Equivalent Privacy (WEP) shared secret encryption key, 128-bits." SYNTAX OCTET STRING (SIZE (5..13)) AwcInvokeCommand ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Command directive to control asynchronous operations on the host system of the SNMP agent. Not all asynchronous operations support all directives. For example, not all operations support 'restart' or 'restartNotify' commands. inactive - No operation is either started or in progress. start - Start the operation. Perform the operation to completion. startNotify - Start the operation. Perform the operation to completion, then notify the requesting SNMP Manager via a Trap. restart - If the operation is not already started, start it. If it is already started, re-initialize the operation in a graceful manner and start it over again. Do not alter the Notify option of the corresponding Start command. restartNotify - If the operation is not already started, start it. If it is already started, re-initialize the operation in a graceful manner and start it over again. When the operation is complete, notify the requesting SNMP Manager via a Trap. cancel - If the operation, is not started, do nothing. If it is started, stop the operation gracefully. Notify the SNMP Manager via a Trap in accordance with whether {Re}Start or {Re}StartNotify was used. Multiple use of 'start' before an operation completes is ignored. Multiple use of 'startNotify' before an operation completes adds the Notify option of the operation." SYNTAX INTEGER { inactive(1), start(2), startNotify(3), restart(4), restartNotify(5), cancel(6) } AwcDot11MicAlgorithm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets to validate that they have not been modified. This is in addition to the standard 802.11 ICV." SYNTAX INTEGER { micNone(1), micMMH(2) } AwcDot11WEPKeyPermuteAlgorithm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Function through which the WEP encryption key is permuted between key renewal periods." SYNTAX INTEGER { wepPermuteNone(1), wepPermuteIV(2) } AwcEventDisposition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the manner in which an event should be handled by the system. Events can be counted, displayed on the console, recorded in the system's event log memory, or an external device can be notified of the event. Each degree of handling implies all lower degrees." SYNTAX INTEGER { count(1), displayConsole(2), record(3), notify(4) } AwcDot11EventDisposition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies options to handled standard IEEE 802.11 traps on this system" SYNTAX INTEGER { noNotification(1), eventLogOnly(2), ieeeTrapOnly(3), eventLogAndIeeeTrap(4) } AwcHotStandbyStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the hot standby access point: normal(0) - AP hot standby is running. initializing(1) - AP hot standby is being initialized. takeover(2) - AP takeovers as new active access point. stopped(3) - AP hot standby stopped. associating(4) - Standby AP associates to active access point. rootMacFailed(5) - Cannot detect root AP MAC address. interfaceMerge(6) - Interface merge. associationFail(7) - Association failed. etherTestFail(8) - Hot standby test on Ethernet failed. radioTestFail(9) - Hot standby test on radio failed. error(10) - Hot standby system error." SYNTAX INTEGER { normal(0), initializing(1), takeover(2), stopped(3), associating(4), rootMacFailed(5), interfaceMerge(6), associationFail(7), etherTestFail(8), radioTestFail(9), error(10) } -- ******************************************************************** -- * awcSystem parameters -- ******************************************************************** vxWorksVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the underlying VxWorks operating system." ::= { awcSystem 1 } creationDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time the Access Point system code was initially compiled." ::= { awcSystem 2 } awcVxVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the Access Point system code." ::= { awcSystem 3 } sysFlags OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VxWorks sysFlags system-configuration flags in use by the Access Point system. Not used by system code with awcVxVersion from 10.00 to 11.06." DEFVAL { 192 } ::= { awcSystem 4 } languageCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The language currently in use by the system. Max. string length is 128 octets." DEFVAL { "en-US" } ::= { awcSystem 5 } awcDevID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP protocol device ID of the system when using the full capabilities with which the system is licensed. Note that a system may be configured to use fewer capabilities that those for which it is licensed. For example, a Bridge may be configured for use as an Access Point." ::= { awcSystem 6 } awcDevIDtxt OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual representation of awcDevID. Max. string length is 128 octets." ::= { awcSystem 7 } enableHTTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point's HTTP server can accept connections from other network devices. If false, the Access Point's HTTP server will only accept connections from the Access Point's console or indirectly over TELNET." DEFVAL { true } ::= { awcSystem 8 } enableTelnet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point's TELNET server can accept connections from other network devices. If false, all TELNET connections will be refused." DEFVAL { true } ::= { awcSystem 9 } enableSNMP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point's SNMP agent can accept connections from other network devices. If false, all SNMP connections will be refused. Note that this can only be set to false by an SNMP management station. If false, it can only be set to true by non-SNMP means." DEFVAL { false } ::= { awcSystem 10 } enableDnsResolver OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point will attempt to resolve IP address references through all configured DNS servers and will attempt to perform reverse-lookup via all configured DNS servers when displaying IP addresses. If false, the Access Point will interpret and display only explicit numeric IP addresses." DEFVAL { true } ::= { awcSystem 11 } enableSNTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point will attempt to periodically update its wall-clock time via a configured SNTP server. If false, the Access Point wall-clock time must be manually adjusted." DEFVAL { false } ::= { awcSystem 13 } enableWDB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point will enable use of the VxWorks WDB debugger upon its next reboot. If false, no WDB debugging services will be available after the next reboot. The value of enableWDB is applicable only to special diagnostic versions of the Access Point system code." DEFVAL { false } ::= { awcSystem 14 } pingTxLen OBJECT-TYPE SYNTAX Unsigned32 (12..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "The size in octets of ping packets transmitted by the Access Point. Default 64." DEFVAL { 64 } ::= { awcSystem 15 } awcFirstBoot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, no user-specified configuration has been saved by the Access Point since either the system left Cisco manufacturing or since the user performed a Reset All System Factory Defaults operation. If false, a change in configuration has been saved by the user. Note that configurations specified solely via boot protocols such as DHCP or BOOTP are not considered user-specified for purposes of changing awcFirstBoot." DEFVAL { true } ::= { awcSystem 16 } awcOemOUI OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IEEE Organizationally Unique Identifier of the reseller for which this system is branded." ::= { awcSystem 17 } awcOemName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The full name of the reseller for which this system is branded." ::= { awcSystem 18 } awcOemNameShort OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "An abbreviated name of the reseller for which this system is branded." ::= { awcSystem 19 } awcOemHomeURL OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The URL of the corporate HTML home page of the reseller for which this system is branded." ::= { awcSystem 20 } enablePSPF OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, Publicly-Secure Packet Forwarding mode is enabled (i.e. clients can not communicate with each other). If false, normal packet forwarding is used." DEFVAL { false } ::= { awcSystem 21 } sysExceptionReboot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, all access violations or other general faults in any task will result in a reboot of the system. If false, such errors will not result in a reboot, and thus diagnostics can be performed on the system." DEFVAL { true } ::= { awcSystem 24 } bootblockVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the Access Point boot block (bootstrap loader) code." ::= { awcSystem 25 } motherboardRevision OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Revision number of the Access Point system motherboard." ::= { awcSystem 26 } enableSTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true and the system is licensed with Bridge capabilities, the IEEE 802.1D Spanning Tree Protocol will be be used to control packet forwarding on all network interfaces. If false or the system is not licensed with Bridge capabilities, the system will use Access Point heuristics to control packet forwarding on all network interfaces." ::= { awcSystem 27 } enableRebootKey OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the VxWorks Monitor Trap keystroke is enabled from the console and from Telnet. By default, this is <control-X>. Entering this character initiates a warm-restart of the system. If false, the VxWorks Monitor Trap keystroke is disabled." DEFVAL { false } ::= { awcSystem 28 } awcLocateUnit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the unit will immediately begin flashing all three of its Status LEDs with an alternating pattern of amber and off. If false, the Status LEDs operate in their normal fashion." DEFVAL { false } ::= { awcSystem 29 } -- ******************************************************************** -- * End of awcSystem parameters -- ******************************************************************** -- ******************************************************************** -- * bootconfigVx parameters -- ******************************************************************** bootconfigBootProtocol OBJECT-TYPE SYNTAX INTEGER {none(1), bootp(2), dhcp(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol to be used for automatic configuration at the time of system bootstrap/reboot. Options BOOTP, DHCP, or none." DEFVAL { dhcp } ::= { bootconfigVx 1 } bootconfigReadINI OBJECT-TYPE SYNTAX INTEGER {always(1), never(2), ifSpecified(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "If always, the system will attempt to read a .ini-formatted configuration file upon every reboot. If never, the system will not attempt to read a .ini file upon reboot, even if a boot protocol is in use and the boot server specifies a file to be read. If ifSpecified, the system will attempt to read a .ini file upon reboot if and only if a boot protocol is in use and the boot server explicitly specifies a file to be read. The system attempts several filenames in the process of retrieving a .ini file without error. In order, these filenames are based on the system's BOOTP- or DHCP-assigned client name, then the MIB2 sysName, then the system's IP address, then, as a last resort, the BOOTP- or DHCP-assigned boot file name. For each filename, the system attempts to read first from the designated defaultFileServer, then, if not successful, from one of either the BOOTP/DHCP server itself or bootconfigFileServerAddr (if specified by the BOOTP/DHCP server)." DEFVAL { ifSpecified } ::= { bootconfigVx 2 } bootconfigServerConfigTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time in seconds which the system should wait for a configuration response from a BOOTP server before falling back to the stored configuration." DEFVAL { 120 } ::= { bootconfigVx 3 } bootconfigMultOfferTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time, in seconds, which the system should wait for a better offer configuration response from a DHCP or BOOTP server before choosing the best current offer." DEFVAL { 5 } ::= { bootconfigVx 4 } bootconfigReqLeaseDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The requested DHCP lease duration, in minutes." DEFVAL { 1440 } ::= { bootconfigVx 5 } bootconfigMinLeaseDuration OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum acceptable DHCP lease duration, in minutes." DEFVAL { 0 } ::= { bootconfigVx 6 } bootconfigDev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Text string identifying the network device used for bootstrapping the system via BOOTP or DHCP. This is only applicable in BOOTP mode or when the system is configured as a router, when not all the network interfaces share the same ifPhysAddress." ::= { bootconfigVx 7 } bootconfigClientAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 8 } bootconfigHostAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of the BOOTP or DHCP server from which the configuration of this device was leased." ::= { bootconfigVx 9 } bootconfigBootFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the default boot configuration file, specified by the BOOTP or DHCP server, containing the system configuration to be utilized by this device. This is considered a default configuration file because many DHCP servers are not capable of distinguishing boot files between different clients." ::= { bootconfigVx 10 } bootconfigSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network subnet mask to be used by this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 11 } bootconfigGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of the default network gateway to be used by this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 12 } bootconfigHostName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual name of the BOOTP or DHCP server from which the configuration of this device was leased. This should be a DNS-recognizable host name." ::= { bootconfigVx 13 } bootconfigClientName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual name of this device, as determined by the BOOTP or DHCP protocol. This should be a DNS-recognizable host name." ::= { bootconfigVx 14 } bootconfigNameServerTable OBJECT-TYPE SYNTAX SEQUENCE OF BootconfigNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DNS Name Servers provided by the bootconfigHostAddr Boot Server." ::= { bootconfigVx 15 } bootconfigNameServerEntry OBJECT-TYPE SYNTAX BootconfigNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in bootconfigNameServerTable." INDEX {bootconfigNameServerPriority} ::= { bootconfigNameServerTable 1 } BootconfigNameServerEntry ::= SEQUENCE { bootconfigNameServerPriority INTEGER, bootconfigNameServer IpAddress} bootconfigNameServerPriority OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority order in which a domain name server is queried. Lower values are queried first." ::= { bootconfigNameServerEntry 1 } bootconfigNameServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 address of a domain name server." ::= { bootconfigNameServerEntry 2 } bootconfigDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the IP domain of which this device is a member, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 16 } bootconfigSntpServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of SNTP server for use by this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 17 } bootconfigSaveServerResponse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the leased configuration from a boot server is saved as the new system defaults. If false, system defaults remain unchanged when a new configuration is leased." DEFVAL { true } ::= { bootconfigVx 18 } bootconfigCmdInvokeIniLoad OBJECT-TYPE SYNTAX AwcInvokeCommand MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate loading of an initialization script '.ini' file from the file server into the system FLASH. Commands recognized: start." ::= { bootconfigVx 19 } bootconfigCmdStatusIniLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the most recent command to load an initialization script '.ini' file. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = The '.ini' file was not found on the file server. 12 = Insufficient memory to load the '.ini' file. 22 = Invalid '.ini' file format. 35 = File format of the '.ini' file is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled." ::= { bootconfigVx 20 } -- bootconfigCmdInvokeIniSave OBJECT-TYPE -- SYNTAX AwcInvokeCommand -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Initiate saving of an initialization -- script '.ini' file to the file server -- from the system FLASH." -- ::= { bootconfigVx 21 } -- bootconfigCmdStatusIniSave OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Status of the most recent command to save -- the initialization script '.ini' file. -- Possible values: -- 0 = Operation completed successfully (or -- has not taken place). -- 1 = Insufficient permission to save the -- file. -- 2 = The '.ini' file was not found on the -- file server. -- 22 = Invalid '.ini' file format. -- 68 = Operation is still in progress. Poll -- again later. -- 72 = Operation was started, but later was -- canceled." -- ::= { bootconfigVx 22 } -- bootconfigDetailLevelIniSave OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Level of detail and line formatting for -- the initialization script '.ini' file to -- be saved." -- ::= { bootconfigVx 23 } bootconfigDhcpClassID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specification of the DHCP Class Identifier presented by the system when requesting DHCP leases." DEFVAL { "AP4800E" } ::= { bootconfigVx 24 } bootconfigFileServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of the file server from which to read configuration files, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 25 } bootconfigLogServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of the host to receive SYSLOG messages, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 26 } bootconfigBootCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the system code has been restarted since the system left Cisco manufacturing." ::= { bootconfigVx 27 } bootconfigDhcpClientIdType OBJECT-TYPE SYNTAX INTEGER { ethernet10Mb(1), experimentalEthernet3Mb(2), amateurRadioAxDot25(3), proteonProNetTokenRing(4), chaos(5), ieee802Networks(6), arcnet(7), hyperchannel(8), lanstar(9), autonet(10), localTalk(11), localNet(12), nonHardware(128) } MAX-ACCESS read-write STATUS current DESCRIPTION "The ARP hardware type, per RFC 1700, of bootconfigDhcpClientIdValue. If it is not a hardware address (e.g. is a fully-qualified domain name), a value of 0 will be used for the DHCP Client Identifier 'htype' field." ::= { bootconfigVx 28 } bootconfigDhcpClientIdValue OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specification of the DHCP unique client Identifier presented by the system when requesting DHCP leases." ::= { bootconfigVx 29 } -- ******************************************************************** -- * End of bootconfigVx parameters -- ******************************************************************** -- ******************************************************************** -- * awcSerialDev parameters -- ******************************************************************** awcSerialConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcSerialConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SerialConfigTable attributes. In tabular form to allow for multiple instances on an agent." ::= { awcSerialDev 1 } awcSerialConfigEntry OBJECT-TYPE SYNTAX AwcSerialConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcSerialConfigEntry table." INDEX {serialDevIndex} ::= { awcSerialConfigTable 1 } AwcSerialConfigEntry ::= SEQUENCE { serialDevIndex Integer32, serialAdminStatus INTEGER, serialOperStatus INTEGER, serialBaud Unsigned32, serialParity INTEGER, serialDataBits Unsigned32, serialStopBits Unsigned32, serialFlowControl INTEGER, serialTerminalType INTEGER, serialTerminalLines Unsigned32, serialTerminalColumns Unsigned32, serialDevFd Integer32 } serialDevIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The index used to access rows in the awcSerialConfig table." ::= { awcSerialConfigEntry 1 } serialAdminStatus OBJECT-TYPE SYNTAX INTEGER {up(1), down(2), testing(3), error(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "The requested status of the serial port." DEFVAL { up } ::= { awcSerialConfigEntry 2 } serialOperStatus OBJECT-TYPE SYNTAX INTEGER {up(1), down(2), testing(3), error(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "The actual status of the serial port." ::= { awcSerialConfigEntry 3 } serialBaud OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The baud rate of the serial port." DEFVAL { 9600 } ::= { awcSerialConfigEntry 4 } serialParity OBJECT-TYPE SYNTAX INTEGER {none(1), even(2), odd(3), one(4), zero(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "The parity of the serial port." DEFVAL { none } ::= { awcSerialConfigEntry 5 } serialDataBits OBJECT-TYPE SYNTAX Unsigned32 (7..8) UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of data bits per character recognized by the serial port." DEFVAL { 8 } ::= { awcSerialConfigEntry 6 } serialStopBits OBJECT-TYPE SYNTAX Unsigned32 (1..2) UNITS "bits" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of stop bits of the serial port." DEFVAL { 1 } ::= { awcSerialConfigEntry 7 } serialFlowControl OBJECT-TYPE SYNTAX INTEGER {none(1), swXonXoff(2), hwRtsCts(3), swHwBoth(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "The flow control method used by the serial port." DEFVAL { swXonXoff } ::= { awcSerialConfigEntry 8 } serialTerminalType OBJECT-TYPE SYNTAX INTEGER {teletype(1), ansi(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The terminal type of the serial port." DEFVAL { teletype } ::= { awcSerialConfigEntry 9 } serialTerminalLines OBJECT-TYPE SYNTAX Unsigned32 (16..50) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of horizontal lines available on each terminal page. Default 24." DEFVAL { 24 } ::= { awcSerialConfigEntry 10 } serialTerminalColumns OBJECT-TYPE SYNTAX Unsigned32 (64..132) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of vertical columns available on each terminal page. Default 80." DEFVAL { 80 } ::= { awcSerialConfigEntry 11 } serialDevFd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VxWorks I/O File Descriptor used to access the serial device." ::= { awcSerialConfigEntry 12 } -- ******************************************************************** -- * End of awcSerialDev parameters -- ******************************************************************** -- ******************************************************************** -- * awcFtp parameters -- ******************************************************************** defaultFileServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the preferred file server to be used for all FTP and TFTP Put and Get operations. Max. name length is 128 octets." DEFVAL { "" } ::= { awcFtp 1 } awcFileXferProtocol OBJECT-TYPE SYNTAX INTEGER {tftp(1), ftp(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol to be used by the system for file transfer (TFTP or FTP)." DEFVAL { ftp } ::= { awcFtp 2 } awcFileXferUser OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the user, as required by all FTP file transfers. Max. name length is 128 octets." DEFVAL { "anonymous" } ::= { awcFtp 3 } awcFileXferPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password of the user, as required by all FTP file transfers. Max. password length is 128 octets." DEFVAL { "" } ::= { awcFtp 4 } awcFileXferCmdInvokeFileLoad OBJECT-TYPE SYNTAX AwcInvokeCommand MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate loading of all specified files from the file server into the system FLASH. Commands recognized: start." ::= { awcFtp 5 } awcFileXferCmdStatusFileLoad OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the most recent command to load the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = At least one file was not found on the file server. 12 = Insufficient memory to load all files. 22 = No file specified, or invalid file format. 35 = File format of at least one of the files is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled." ::= { awcFtp 6 } awcFileXferCmdInvokeFileSave OBJECT-TYPE SYNTAX AwcInvokeCommand MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate saving of all specified fileXferFile* files to the file server from the system FLASH. Commands recognized: start." ::= { awcFtp 7 } awcFileXferCmdStatusFileSave OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the most recent command to save the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 1 = Insufficient permission to save the files. 2 = A directory specified for saving at least one of the files was not found. 22 = No file specified, or invalid file format. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled." ::= { awcFtp 8 } awcFileXferFileFirmwareSystem OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the system firmware image. Max. string length is 128 octets." DEFVAL { "" } ::= { awcFtp 9 } awcFileXferFileFirmwareRadio0 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the radio firmware image. Max. string length is 128 octets." DEFVAL { "" } ::= { awcFtp 10 } awcFileXferFileWebUI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the system Web pages image. Max. string length is 128 octets." DEFVAL { "" } ::= { awcFtp 11 } awcFileXferFileFpgaPcmcia OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the FPGA image for the PCMCIA controller. Max. string length is 128 octets." DEFVAL { "" } ::= { awcFtp 12 } awcFileXferTftpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IP port number over which to perform TFTP operations. Default 69." DEFVAL { 69 } ::= { awcFtp 13 } awcFileXferFtpDirectory OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Directory on defaultFileServer in which files are located." DEFVAL { "" } ::= { awcFtp 14 } -- awcFileXferFtpCtrlPort OBJECT-TYPE -- SYNTAX INTEGER (1..65535) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "IP port number over which to perform FTP -- Control operations." -- ::= { awcFtp 15 } -- awcFileXferFtpDataPort OBJECT-TYPE -- SYNTAX INTEGER (1..65535) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "IP port number over which to perform FTP -- Data operations." -- ::= { awcFtp 16 } awcFileXferFilesFLASH OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of a complete FLASH firmware image for the system, including all non-configuration files within the system FLASH file system. Max. string length is 128 octets." DEFVAL { "AP340_latest.img" } ::= { awcFtp 17 } awcFileXferFileFirmwareRadio1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the radio firmware image. Max. string length is 128 octets." DEFVAL { "" } ::= { awcFtp 18 } -- ******************************************************************** -- * End of awcFtp parameters -- ******************************************************************** -- ******************************************************************** -- * awcIfTable parameters -- ******************************************************************** awcIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfTable attributes. In tabular form to allow for multiple instances on an agent." ::= { awcVx 5 } awcIfEntry OBJECT-TYPE SYNTAX AwcIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcIfEntry table." INDEX {ifIndex} ::= { awcIfTable 1 } AwcIfEntry ::= SEQUENCE { awcIfDefaultPhysAddress MacAddress, awcIfPhysAddress MacAddress, awcIfAdoptPrimaryIdentity TruthValue, awcIfDefaultIpAddress IpAddress, awcIfDefaultIpNetMask IpAddress, awcIfIpAddress IpAddress, awcIfIpNetMask IpAddress, awcIfMSDUMaxLength Unsigned32, awcIfOutDiscardsCoS0 Counter32, awcIfOutDiscardsCoS1 Counter32, awcIfOutDiscardsCoS2 Counter32, awcIfOutDiscardsCoS3 Counter32, awcIfOutDiscardsCoS4 Counter32, awcIfOutDiscardsCoS5 Counter32, awcIfOutDiscardsCoS6 Counter32, awcIfOutDiscardsCoS7 Counter32 } awcIfDefaultPhysAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default, factory-assigned MAC address of the interface. Guaranteed to be unique across all IEEE 802 devices." ::= { awcIfEntry 1 } awcIfPhysAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address to be used by the interface. If awcIfDefaultPhysAddress is to be used, this is 00:00:00:00:00:00." DEFVAL { '000000000000'H } ::= { awcIfEntry 2 } awcIfAdoptPrimaryIdentity OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, this interface adopts the identity of bootconfigDev, the primary interface. This includes MAC address, IP address, etc. This is the conventional mode of operation when operating as a transparent bridge. If false, this interface always has a unique MAC address." DEFVAL { true } ::= { awcIfEntry 3 } awcIfDefaultIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The default IPv4 Address of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server." DEFVAL { '0A000001'H } ::= { awcIfEntry 4 } awcIfDefaultIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The default IPv4 netmask of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server." DEFVAL { 'FFFFFF00'H } ::= { awcIfEntry 5 } awcIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 Address currently in use by the interface." ::= { awcIfEntry 6 } awcIfIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 netmask currently in use by the interface." ::= { awcIfEntry 7 } awcIfMSDUMaxLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum length of the data portion of a packet for this particular interface. This is the maximum MAC Service Data Unit length, which is greater than or equal to ifMtu, depending on the configured MAC-level encapsulation." ::= { awcIfEntry 8 } awcIfOutDiscardsCoS0 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 0 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 9 } awcIfOutDiscardsCoS1 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 1 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 10 } awcIfOutDiscardsCoS2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 2 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 11 } awcIfOutDiscardsCoS3 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 3 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 12 } awcIfOutDiscardsCoS4 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 4 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 13 } awcIfOutDiscardsCoS5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 5 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 14 } awcIfOutDiscardsCoS6 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 6 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 15 } awcIfOutDiscardsCoS7 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets of CoS 7 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live." ::= { awcIfEntry 16 } -- ******************************************************************** -- * End of awcIfTable parameters -- ******************************************************************** -- ******************************************************************** -- * awc802dot11 parameters -- ******************************************************************** awcDot11smt OBJECT IDENTIFIER ::= {awc802dot11 1} awcDot11StationConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11StationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Config Table attributes. In tabular form to allow for multiple instances on an agent." ::= { awcDot11smt 1 } awcDot11StationConfigEntry OBJECT-TYPE SYNTAX AwcDot11StationConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11StationConfigTable table." INDEX {ifIndex} ::= { awcDot11StationConfigTable 1 } AwcDot11StationConfigEntry ::= SEQUENCE { awcDot11StationRole INTEGER, awcDot11PowerManagementSubMode Unsigned32, awcDot11UseAWCExtensions TruthValue, awcDot11AllowAssocBroadcastSSID TruthValue, awcDot11PrivacyOptionImplementedMaxRate Integer32, awcDot11DesiredBSSLength INTEGER, awcDot11EnetEncapsulationDefault INTEGER, awcDot11ForceReqFirmwareVersion TruthValue, awcDot11BridgeSpacing Unsigned32, awcDot11DesiredSSIDMaxAssociatedSTA INTEGER, awcDot11DesiredSSIDNumAssociatedSTA INTEGER, awcDot11AuxiliarySSIDLength INTEGER, awcDot11MultipleSSIDPerBSSImplemented TruthValue, awcDot11SymbolExtensionsImplemented TruthValue, awcDot11SymbolExtensionsEnabled TruthValue, awcDot11DesiredSSIDMicAlgorithm AwcDot11MicAlgorithm, awcDot11DesiredSSIDWEPKeyPermuteAlgorithm AwcDot11WEPKeyPermuteAlgorithm, awcDot11DesiredSSIDInfrastructureWGB TruthValue, awcDot11DesiredSSIDDefaultPolId AwcPolId, awcDot11DesiredSSIDDefaultVlanId AwcVlanId, awcDot11DesiredSSIDEnableProxyMobileIP TruthValue, awcDot11InfrastructureSSID INTEGER, awcDot11QBSSElementImplemented TruthValue, awcDot11QBSSElementEnabled TruthValue, awcDot11InfrastructureSSIDExclusive TruthValue, awcDot11SendIGMPGeneralQuery TruthValue, awcDot11NonRootMobility INTEGER } awcDot11StationRole OBJECT-TYPE SYNTAX INTEGER {roleClient(1), roleIBSS(2), roleRepeater(3), roleAP(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "The role of this station itself within the 802.11 BSS (radio cell) of which it is a member." DEFVAL { roleAP } ::= { awcDot11StationConfigEntry 1 } awcDot11PowerManagementSubMode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "When configured as roleClient, the Power Management Submode of the device." DEFVAL { 0 } ::= { awcDot11StationConfigEntry 2 } awcDot11UseAWCExtensions OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, Aironet extensions to the basic 802.11 protocol are enabled. This results in better BSS performance and faster roaming. If false, only the basic 802.11 protocols are used. This ensures maximum compatibility with non-Aironet equipment." DEFVAL { true } ::= { awcDot11StationConfigEntry 3 } awcDot11AllowAssocBroadcastSSID OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true and awcDot11StationRole is either roleAP or roleRepeater, the radio will respond to Broadcast SSID Probe Requests and will broadcast its own SSID within its Beacons. If false, the radio will not respond to the Broadcast SSID and will not broadcast its SSID within Beacons." DEFVAL { true } ::= { awcDot11StationConfigEntry 4 } awcDot11PrivacyOptionImplementedMaxRate OBJECT-TYPE SYNTAX Integer32 (2..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum Transmit bit rate supported by the radio when using WEP encryption. Expressed in standard 802.11 increments of 500Kb/sec." ::= { awcDot11StationConfigEntry 5 } awcDot11DesiredBSSLength OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in awcDot11DesiredBSSTable." ::= { awcDot11StationConfigEntry 6 } awcDot11EnetEncapsulationDefault OBJECT-TYPE SYNTAX INTEGER {encap802dot1H(1), encapRfc1042(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The Ethernet Encapsulation Transform type used within the BSS. Either IEEE 802.1H or RFC 1042 can be utilized. IEEE 802.1H provides exceptions for the Novel IPX and AARP protocols." DEFVAL { encapRfc1042 } ::= { awcDot11StationConfigEntry 7 } awcDot11ForceReqFirmwareVersion OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the radio driver will only allow operation with the specific radio firmware revision with which it was originally tested. If false, the radio driver will allow operation with the radio firmware revision with which it was tested, or any later radio firmware revision." DEFVAL { true } ::= { awcDot11StationConfigEntry 8 } awcDot11BridgeSpacing OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "If this device is the root side of a Bridge configuration, this value is the distance in kilometers reported between this device and its farthest non-root Bridge." DEFVAL { 0 } ::= { awcDot11StationConfigEntry 9 } awcDot11DesiredSSIDMaxAssociatedSTA OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of 802.11 Stations which may Associate with this access point through either the Broadcast SSID or through dot11DesiredSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point." DEFVAL { 0 } ::= { awcDot11StationConfigEntry 10 } awcDot11DesiredSSIDNumAssociatedSTA OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of 802.11 Stations which are Associated with this access point through either the Broadcast SSID or through dot11DesiredSSID." ::= { awcDot11StationConfigEntry 11 } awcDot11AuxiliarySSIDLength OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in awcDot11AuxiliarySSIDTable. If awcDot11MultipleSSIDPerBSSImplemented is FALSE, awcDot11AuxiliarySSIDLength must be 0." ::= { awcDot11StationConfigEntry 12 } awcDot11MultipleSSIDPerBSSImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the station implementation is capable of responding to 802.11 Probe Requests for SSIDs other than dot11DesiredSSID. The default value of this attribute is FALSE." ::= { awcDot11StationConfigEntry 13 } awcDot11SymbolExtensionsImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the station implementation is capable of generating Symbol, Inc. proprietary elements in its Beacons and Probe Responses. These elements enable support for Symbol Voice-over-IP (VoIP) phones. The default value of this attribute is FALSE." ::= { awcDot11StationConfigEntry 14 } awcDot11SymbolExtensionsEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Should the Radio generate Symbol, Inc. proprietary elements in its Beacons and Probe Responses in support of Symbol VoIP phones?" DEFVAL { false } ::= { awcDot11StationConfigEntry 15 } awcDot11DesiredSSIDMicAlgorithm OBJECT-TYPE SYNTAX AwcDot11MicAlgorithm MAX-ACCESS read-write STATUS current DESCRIPTION "Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID." DEFVAL { micNone } ::= { awcDot11StationConfigEntry 16 } awcDot11DesiredSSIDWEPKeyPermuteAlgorithm OBJECT-TYPE SYNTAX AwcDot11WEPKeyPermuteAlgorithm MAX-ACCESS read-write STATUS current DESCRIPTION "Function through which the WEP encryption key is permuted between key renewal periods for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID." DEFVAL { wepPermuteNone } ::= { awcDot11StationConfigEntry 17 } awcDot11DesiredSSIDInfrastructureWGB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true, Workgroup Bridge-class devices Associated to this access point through either the Broadcast SSID or dot11DesiredSSID are provided the class of service which is provided to network infrastructure stations by their parent access point. This includes use of the 802.11 reliable multicast protocol (4-address packets for multicast). When false, Workgroup Bridge-class devices are provided the class of service which is provided to ordinary client stations." DEFVAL { true } ::= { awcDot11StationConfigEntry 18 } awcDot11DesiredSSIDDefaultPolId OBJECT-TYPE SYNTAX AwcPolId MAX-ACCESS read-write STATUS current DESCRIPTION "Default Policy Group Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that no special policies are to be applied by default." DEFVAL { 0 } ::= { awcDot11StationConfigEntry 19 } awcDot11DesiredSSIDDefaultVlanId OBJECT-TYPE SYNTAX AwcVlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Default VLAN Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId." DEFVAL { 0 } ::= { awcDot11StationConfigEntry 20 } awcDot11DesiredSSIDEnableProxyMobileIP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID." DEFVAL { false } ::= { awcDot11StationConfigEntry 21 } awcDot11InfrastructureSSID OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-write STATUS current DESCRIPTION "Index of the SSID which all 802.11 infrastructure stations shall use for Association. If 0, an access point and its repeaters and other subordinate infrastructure devices will Associate through dot11DesiredSSID. If non-0, an access point and its subordinate infrastructure devices will Associate through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11InfrastructureSSID." DEFVAL { 0 } ::= { awcDot11StationConfigEntry 22 } awcDot11QBSSElementImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute, when TRUE, indicates that the station implementation is capable of generating 802.11e QBSS elements in its Beacons and Probe Responses. These elements enable support for basic 802.11 Quality of Service. The default value of this attribute is FALSE." ::= { awcDot11StationConfigEntry 23 } awcDot11QBSSElementEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Should the Radio generate 802.11e QBSS elements in its Beacons and Probe Responses in support of 802.11 Quality of Service?" DEFVAL { false } ::= { awcDot11StationConfigEntry 24 } awcDot11InfrastructureSSIDExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Should this access point restrict all infrastructure stations to associate only through the SSID specified by awcDot11InfrastructureSSID?" DEFVAL { false } ::= { awcDot11StationConfigEntry 25 } awcDot11SendIGMPGeneralQuery OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Should this access point issue an IGMP General Query to all associated stations when they complete all required high-level authentication? Such an IGMP query can help configure multicast groups efficiently." DEFVAL { false } ::= { awcDot11StationConfigEntry 26 } awcDot11NonRootMobility OBJECT-TYPE SYNTAX INTEGER { mobile(1), stationary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine if the radio should look for a better parent AP in heavy traffic condition when the awcDot11StationRole is roleClient(1) or roleRepeater(3). It will look for better parent if it is mobile(1) and will not look for better parent if it is stationary(2)." DEFVAL { stationary } ::= { awcDot11StationConfigEntry 27 } awcDot11AuthenticationAlgorithmsTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11AuthenticationAlgorithmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains attributes to configure authentication algorithm parameters for associations through the SSID defined by IEEE802dot11-MIB dot11DesiredSSID object. It defines attributes additional to those defined in the IEEE802dot11-MIB dot11AuthenticationAlgorithmsTable. An interface may support multiple authentication algorithms. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). This table uses the dot11AuthenticationAlgorithmsIndex of the dot11AuthenticationAlgorithmsTable defined in the IEEE802dot11-MIB as the expansion index. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7.6 and IEEE802dot11-MIB." ::= { awcDot11smt 2 } awcDot11AuthenticationAlgorithmsEntry OBJECT-TYPE SYNTAX AwcDot11AuthenticationAlgorithmsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies Cisco Aironet product specific authentication algorithm configuration attributes of the dot11DesiredSSID on a radio interface." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 8.2 and IEEE802dot11-MIB." INDEX { ifIndex, awcDot11AuthenticationAlgorithmsIndex} ::= { awcDot11AuthenticationAlgorithmsTable 1 } AwcDot11AuthenticationAlgorithmsEntry ::= SEQUENCE { awcDot11AuthenticationAlgorithmsIndex Integer32, awcDot11AuthenticationRequireEAP TruthValue, awcDot11AuthenticationDefaultUcastAllowedToGoTo OCTET STRING } awcDot11AuthenticationAlgorithmsIndex OBJECT-TYPE SYNTAX Integer32 (1..65536) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the Aironet Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex." ::= { awcDot11AuthenticationAlgorithmsEntry 1 } awcDot11AuthenticationRequireEAP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, stations authenticating with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication." ::= { awcDot11AuthenticationAlgorithmsEntry 2 } awcDot11AuthenticationDefaultUcastAllowedToGoTo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length." REFERENCE "RFC 1493, BRIDGE-MIB, dot1dStaticTable." ::= { awcDot11AuthenticationAlgorithmsEntry 3 } awcDot11WEPDefaultKeysTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11WEPDefaultKeysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension of dot11WEPDefaultKeysTable to allow for key lengths other than 40 bits." ::= { awcDot11smt 3 } awcDot11WEPDefaultKeysEntry OBJECT-TYPE SYNTAX AwcDot11WEPDefaultKeysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11WEPDefaultKeysTable table." INDEX {ifIndex, awcDot11WEPDefaultKeyIndex} ::= { awcDot11WEPDefaultKeysTable 1 } AwcDot11WEPDefaultKeysEntry ::= SEQUENCE { awcDot11WEPDefaultKeyIndex INTEGER, awcDot11WEPDefaultKeyLen INTEGER, awcDot11WEPDefaultKeyValue WEPKeytype128 } awcDot11WEPDefaultKeyIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1" ::= { awcDot11WEPDefaultKeysEntry 1 } awcDot11WEPDefaultKeyLen OBJECT-TYPE SYNTAX INTEGER (0..13) MAX-ACCESS read-write STATUS current DESCRIPTION "Length in octets of awcDot11WEPDefaultKeyValue. If 0, the corresponding awcDot11WEPDefaultKeyValue is not configured." ::= { awcDot11WEPDefaultKeysEntry 2 } awcDot11WEPDefaultKeyValue OBJECT-TYPE SYNTAX WEPKeytype128 MAX-ACCESS read-write STATUS current DESCRIPTION "A WEP default secret key value. The value is write-only (attempt to read will result in return of a zero-length string)." ::= { awcDot11WEPDefaultKeysEntry 3 } awcDot11PrivacyTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11PrivacyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional information about the WEP capabilities of the device. In tabular form to allow for multiple instances on an agent." ::= { awcDot11smt 5 } awcDot11PrivacyEntry OBJECT-TYPE SYNTAX AwcDot11PrivacyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11PrivacyTable table." INDEX {ifIndex} ::= { awcDot11PrivacyTable 1 } AwcDot11PrivacyEntry ::= SEQUENCE { awcDot11WEPDefaultKeyMaxIndex INTEGER, awcDot11AllowEncrypted TruthValue, awcDot11WEPKeyMaxLen INTEGER, awcDot11LEAPUserName OCTET STRING, awcDot11LEAPPassword OCTET STRING } awcDot11WEPDefaultKeyMaxIndex OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum WEP Default Key index which the radio supports. Range 1..4, or 0 if the radio does not support WEP." ::= { awcDot11PrivacyEntry 1 } awcDot11AllowEncrypted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as the dot11ExcludeUnencrypted attribute is false. The default value of this attribute shall be false." DEFVAL { false } ::= { awcDot11PrivacyEntry 2 } awcDot11WEPKeyMaxLen OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum WEP Key Length which the radio supports. Range 0..16, or 0 if the radio does not support WEP. Note that, even if the radio supports more than 13 octets of key value, the current 802.11 standard only makes use of the first 13 octets." ::= { awcDot11PrivacyEntry 3 } awcDot11LEAPUserName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "User Name assigned to the system for use when authenticating with AAA servers." DEFVAL { "" } ::= { awcDot11PrivacyEntry 4} awcDot11LEAPPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "User Password (shared secret) assigned to the system for use when authenticating with AAA servers." DEFVAL { "" } ::= { awcDot11PrivacyEntry 5} awcDot11DesiredBSSTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11DesiredBSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "When the radio is not in roleAP, a list of preferred Access Points with which the radio should Associate. In tabular form to allow for multiple instances on an agent." ::= { awcDot11smt 6 } awcDot11DesiredBSSEntry OBJECT-TYPE SYNTAX AwcDot11DesiredBSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11DesiredBSSTable table." INDEX {ifIndex, awcDot11DesiredBSSIndex} ::= { awcDot11DesiredBSSTable 1 } AwcDot11DesiredBSSEntry ::= SEQUENCE { awcDot11DesiredBSSIndex INTEGER, awcDot11DesiredBSS MacAddress } awcDot11DesiredBSSIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority order in which Preferred Access Points should be probed. Lower indices are probed first." ::= { awcDot11DesiredBSSEntry 1 } awcDot11DesiredBSS OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The BSS identifier (MAC address) of the Access Point with which the radio should try to Associate, or 00:00:00:00:00:00 if the BSS identifier for this priority is unspecified." DEFVAL { '000000000000'H } ::= { awcDot11DesiredBSSEntry 2 } awcDot11AuxiliarySSIDTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11AuxiliarySSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "When the radio is not in roleClient, a list of Stations which, when Associated to this system, shall always have the same AID." ::= { awcDot11smt 7 } awcDot11AuxiliarySSIDEntry OBJECT-TYPE SYNTAX AwcDot11AuxiliarySSIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11AuxiliarySSIDTable table." INDEX {ifIndex, awcDot11AuxSSIDIndex} ::= { awcDot11AuxiliarySSIDTable 1 } AwcDot11AuxiliarySSIDEntry ::= SEQUENCE { awcDot11AuxSSIDIndex INTEGER, awcDot11AuxSSID OCTET STRING, awcDot11AuxSSIDMaxAssociatedSTA INTEGER, awcDot11AuxSSIDNumAssociatedSTA INTEGER, awcDot11AuxSSIDDefaultPolId AwcPolId, awcDot11AuxSSIDDefaultVlanId AwcVlanId, awcDot11AuxSSIDEnableProxyMobileIP TruthValue } awcDot11AuxSSIDIndex OBJECT-TYPE SYNTAX INTEGER (1..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of auxiliary SSIDs supported by the access point in addition to dot11DesiredSSID. Domain from 1 to awcDot11AuxiliarySSIDLength." ::= { awcDot11AuxiliarySSIDEntry 1 } awcDot11AuxSSID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute reflects a Service Set ID recognized by the access point. The access point shall respond to Probe Requests specifying this SSID, but does not advertise this SSID in its Beacons." DEFVAL { "" } ::= { awcDot11AuxiliarySSIDEntry 2 } awcDot11AuxSSIDMaxAssociatedSTA OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of 802.11 Stations which may Associate with this access point through awcDot11AuxSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point." DEFVAL { 0 } ::= { awcDot11AuxiliarySSIDEntry 3 } awcDot11AuxSSIDNumAssociatedSTA OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of 802.11 Stations which are Associated with this access point through awcDot11AuxSSID." ::= { awcDot11AuxiliarySSIDEntry 4 } awcDot11AuxSSIDDefaultPolId OBJECT-TYPE SYNTAX AwcPolId MAX-ACCESS read-write STATUS current DESCRIPTION "Default Policy Group Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that no special policies are to be applied by default." DEFVAL { 0 } ::= { awcDot11AuxiliarySSIDEntry 6 } awcDot11AuxSSIDDefaultVlanId OBJECT-TYPE SYNTAX AwcVlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Default VLAN Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId." DEFVAL { 0 } ::= { awcDot11AuxiliarySSIDEntry 7 } awcDot11AuxSSIDEnableProxyMobileIP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point over awcDot11AuxSSID." DEFVAL { false } ::= { awcDot11AuxiliarySSIDEntry 8 } awcDot11AuxSSIDAuthAlgTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11AuxSSIDAuthAlgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This (conceptual) table of attributes shall be a set of all the Aironet-specific parameters for each authentication algorithm supported by the station for each auxiliary SSID listed in awcDot11AuxiliarySSIDTable." ::= { awcDot11smt 8 } awcDot11AuxSSIDAuthAlgEntry OBJECT-TYPE SYNTAX AwcDot11AuxSSIDAuthAlgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Aironet Auxiliary SSID Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex, awcDot11AuxSSIDIndex, awcDot11AuxSSIDAuthAlgIndex} ::= { awcDot11AuxSSIDAuthAlgTable 1 } AwcDot11AuxSSIDAuthAlgEntry ::= SEQUENCE { awcDot11AuxSSIDAuthAlgIndex Integer32, awcDot11AuxSSIDAuthAlgEnable TruthValue, awcDot11AuxSSIDAuthAlgRequireEAP TruthValue, awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo OCTET STRING } awcDot11AuxSSIDAuthAlgIndex OBJECT-TYPE SYNTAX Integer32 (1..65536) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the Aironet Auxiliary SSID Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex." ::= { awcDot11AuxSSIDAuthAlgEntry 1 } awcDot11AuxSSIDAuthAlgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, stations may authenticate to the SSID specified by awcDot11AuxSSIDIndex with the algorithm corresponding to dot11AuthenticationAlgorithmsIndex." ::= { awcDot11AuxSSIDAuthAlgEntry 2 } awcDot11AuxSSIDAuthAlgRequireEAP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, stations authenticating to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication." ::= { awcDot11AuxSSIDAuthAlgEntry 3 } awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length." ::= { awcDot11AuxSSIDAuthAlgEntry 4 } awcDot11AssignedAIDTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11AssignedAIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "When the radio is not functioning as a client station (i.e., awcDot11StationRole is not 'roleClient'), this is the list of AIDs which this agent will assign to the clients associating with it. An AID is assigned if the corresponding MAC address matches that of the client. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71)." ::= { awcDot11smt 9 } awcDot11AssignedAIDEntry OBJECT-TYPE SYNTAX AwcDot11AssignedAIDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11AssignedAIDTable table." INDEX {ifIndex, awcDot11AssignedAID} ::= { awcDot11AssignedAIDTable 1 } AwcDot11AssignedAIDEntry ::= SEQUENCE { awcDot11AssignedAID INTEGER, awcDot11AssignedSTA MacAddress } awcDot11AssignedAID OBJECT-TYPE SYNTAX INTEGER (2..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "An AID which shall be reserved for the exclusive use of a single Station." ::= { awcDot11AssignedAIDEntry 1 } awcDot11AssignedSTA OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Station (MAC address) which, when Associated to this system, shall always be assigned awcDot11AssignedAID as its 802.11 AID." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7.2." DEFVAL { '000000000000'H } ::= { awcDot11AssignedAIDEntry 2 } awcDot11AccessPointCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11AccessPointCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table includes radio statistics collected by the IEEE 802.11 radio interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71)." ::= { awcDot11smt 10 } awcDot11AccessPointCountersEntry OBJECT-TYPE SYNTAX AwcDot11AccessPointCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains counters of frame transmissions and client associations for a radio interface." INDEX {ifIndex} ::= { awcDot11AccessPointCountersTable 1 } AwcDot11AccessPointCountersEntry ::= SEQUENCE { awcDot11AssociatedStationCount Counter32, awcDot11AuthenticatedStationCount Counter32, awcDot11ReassociatedStationCount Counter32, awcDot11RoamedStationCount Counter32, awcDot11DeauthenticateCount Counter32, awcDot11DisassociateCount Counter32, awcDot11EncapPktsMMH Counter32, awcDot11DecapPktsMMH Counter32, awcDot11EncapErrorsMMH Counter32, awcDot11DecapErrorsMMH Counter32, awcDot11DecapExistsMMH Counter32, awcDot11DecapAccessMMH Counter32 } awcDot11AssociatedStationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful 802.11 Association Request operations to this radio of this access point since system startup." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7." ::= { awcDot11AccessPointCountersEntry 1} awcDot11AuthenticatedStationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful 802.11 MAC-level Authentication operations to this radio of this access point since system startup. " REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7." ::= { awcDot11AccessPointCountersEntry 2 } awcDot11ReassociatedStationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful 802.11 Reassociation Request operations to this radio of this access point since system startup." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7." ::= { awcDot11AccessPointCountersEntry 3 } awcDot11RoamedStationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of times that clients which had successfully (re)associated with this access point successfully reassociated with another access point since system startup." ::= { awcDot11AccessPointCountersEntry 4 } awcDot11DeauthenticateCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Deauthenticate frames sent over this radio of this access point since system startup." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7." ::= { awcDot11AccessPointCountersEntry 5 } awcDot11DisassociateCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Disassociate frames sent over this radio of this access point since system startup." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 5.7." ::= { awcDot11AccessPointCountersEntry 6 } awcDot11EncapPktsMMH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets for which the a MIC has been requested to be calculated with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup." ::= { awcDot11AccessPointCountersEntry 7 } awcDot11DecapPktsMMH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received over this radio of this access point since system startup and for which a MIC has been requested to be validated with the MMH algorithm." ::= { awcDot11AccessPointCountersEntry 8 } awcDot11EncapErrorsMMH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets which have failed MIC calculation with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup." ::= { awcDot11AccessPointCountersEntry 9 } awcDot11DecapErrorsMMH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm." ::= { awcDot11AccessPointCountersEntry 10 } awcDot11DecapExistsMMH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to sequence number and duplicate packet errors." ::= { awcDot11AccessPointCountersEntry 11 } awcDot11DecapAccessMMH OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to cryptographic key-mismatch errors." ::= { awcDot11AccessPointCountersEntry 12 } awcDot11mac OBJECT IDENTIFIER ::= {awc802dot11 2} awcDot11CountersTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11CountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains MAC statistics on each of IEEE 802.11 interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71)." ::= { awcDot11mac 2 } awcDot11CountersEntry OBJECT-TYPE SYNTAX AwcDot11CountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains counters of frame transmissions for a radio interface." INDEX { ifIndex } ::= { awcDot11CountersTable 1 } AwcDot11CountersEntry ::= SEQUENCE { awcDot11TxDeferEnergyCount Counter32, awcDot11RxMacCrcErrorCount Counter32, awcDot11SsidMismatchCount Counter32} awcDot11TxDeferEnergyCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of frames deferred transmission due to energy detect since system startup." ::= { awcDot11CountersEntry 1 } awcDot11RxMacCrcErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of frames received with MAC CRC errors since system startup." ::= { awcDot11CountersEntry 2 } awcDot11SsidMismatchCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Beacon or Probe Response frames received for which the SSID does not match dot11DesiredSSID since system startup." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, IEEE802dot11-MIB." ::= { awcDot11CountersEntry 3 } awcDot11QoSTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11QoSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This (conceptual) table of attributes shall be a set of parameters for each traffic category (i.e. 802.1D priority) of packet passed over the radio." ::= { awcDot11mac 4 } awcDot11QoSEntry OBJECT-TYPE SYNTAX AwcDot11QoSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Aironet Quality of Service Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX { ifIndex, awcDot11QoSCoS} ::= { awcDot11QoSTable 1 } AwcDot11QoSEntry ::= SEQUENCE { awcDot11QoSCoS INTEGER, awcDot11QoSCWmin INTEGER, awcDot11QoSCWmax INTEGER } awcDot11QoSCoS OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the Aironet Quality of Service Table. This variable corresponds directly to the 802.1D traffic category ID, plus 1." ::= { awcDot11QoSEntry 1 } awcDot11QoSCWmin OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "802.11 CWmin of the traffic category. The value of this OID must be one of the set 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be less than or equal to awcDot11QoSCWmax." ::= { awcDot11QoSEntry 2 } awcDot11QoSCWmax OBJECT-TYPE SYNTAX INTEGER (1..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "802.11 CWmax of the traffic category. The value of this OID must be one of the set 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be greater than or equal to awcDot11QoSCWmin." ::= { awcDot11QoSEntry 3 } awcDot11res OBJECT IDENTIFIER ::= {awc802dot11 3} awcDot11resAttribute OBJECT IDENTIFIER ::= {awcDot11res 1} awcDot11ResourceInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11ResourceInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Resource Info Table attributes. In tabular form to allow for multiple instances on an agent." ::= { awcDot11resAttribute 2 } awcDot11ResourceInfoEntry OBJECT-TYPE SYNTAX AwcDot11ResourceInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11ResourceInfoTable table." INDEX {ifIndex} ::= { awcDot11ResourceInfoTable 1 } AwcDot11ResourceInfoEntry ::= SEQUENCE { awcDot11FirmwareBootstrapVersion DisplayString } awcDot11FirmwareBootstrapVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware version of the radio boot block. Max. string length is 128 octets." ::= { awcDot11ResourceInfoEntry 1 } awcDot11phy OBJECT IDENTIFIER ::= {awc802dot11 4} awcDot11PhyOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11PhyOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "awcDot11PhyOperationTable attributes. In tabular form to allow for multiple instances on an agent." ::= { awcDot11phy 1 } awcDot11PhyOperationEntry OBJECT-TYPE SYNTAX AwcDot11PhyOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11PhyOperationTable table." INDEX {ifIndex} ::= { awcDot11PhyOperationTable 1 } AwcDot11PhyOperationEntry ::= SEQUENCE { awcDot11CurrentCarrierSet INTEGER, awcDot11ModulationType INTEGER, awcDot11PreambleType INTEGER, awcDot11PHYType INTEGER } awcDot11CurrentCarrierSet OBJECT-TYPE SYNTAX INTEGER {usa(0), europe(1), japan(2), spain(3), france(4), belgium(5), israel(6), canada(7), australia(8), japanWide(9), usa5GHz(11), europe5GHz(12), japan5GHz(13), singapore5GHz(14), taiwan5GHz(15), china(16)} MAX-ACCESS read-only STATUS current DESCRIPTION "The carrier set of the device. The Carrier Set implies a Regulatory Domain, but geographic-specific restrictions within a Regulatory Domain may necessitate several Carrier Sets within the Regulatory Domain." ::= { awcDot11PhyOperationEntry 1 } awcDot11ModulationType OBJECT-TYPE SYNTAX INTEGER {standard(1), mok(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The RF modulation of the radio." DEFVAL { standard } ::= { awcDot11PhyOperationEntry 2 } awcDot11PreambleType OBJECT-TYPE SYNTAX INTEGER {long(1), short(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The current radio preamble type in use by the Station. Possible values: 1 = Use long preambles whenever possible. 2 = Use only short preambles." ::= { awcDot11PhyOperationEntry 3 } awcDot11PHYType OBJECT-TYPE SYNTAX INTEGER {fhss(1), dsss(2), irbaseband(3), dsssDot11A(11)} MAX-ACCESS read-only STATUS current DESCRIPTION "This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, DSSS 5.0 GHz = 11" ::= { awcDot11PhyOperationEntry 5 } awcDot11PhyFHSSTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11PhyFHSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "awcDot11PhyFHSSTable attributes. In tabular form to allow for multiple instances on an agent." ::= { awcDot11phy 4 } awcDot11PhyFHSSEntry OBJECT-TYPE SYNTAX AwcDot11PhyFHSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11PhyFHSSTable table." INDEX {ifIndex} ::= { awcDot11PhyFHSSTable 1 } AwcDot11PhyFHSSEntry ::= SEQUENCE { awcDot11Compatible3100 TruthValue } awcDot11Compatible3100 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Boolean on whether or not the Station should use 1Mb/sec management frames to be compatible with Aironet 3100 series radios." DEFVAL { false } ::= { awcDot11PhyFHSSEntry 1 } awcDot11PhyDSSSTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11PhyDSSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "awcDot11PhyDSSSTable attributes. In tabular form to allow for multiple instances on an agent." ::= { awcDot11phy 5 } awcDot11PhyDSSSEntry OBJECT-TYPE SYNTAX AwcDot11PhyDSSSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcDot11PhyDSSSTable table." INDEX {ifIndex} ::= { awcDot11PhyDSSSTable 1 } AwcDot11PhyDSSSEntry ::= SEQUENCE { awcDot11Compatible4500 TruthValue, awcDot11ChannelAutoImplemented TruthValue, awcDot11ChannelAutoEnabled TruthValue, awcDot11CurrentChannel INTEGER } awcDot11Compatible4500 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Boolean on whether or not the Station should use 2Mb/sec management frames to be compatible with Aironet 4500 series radios." DEFVAL { false } ::= { awcDot11PhyDSSSEntry 1 } awcDot11ChannelAutoImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true, the radio can, when awcDot11StationRole is roleAP, scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. If false, the radio can only establish its BSS on dot11CurrentChannel." ::= { awcDot11PhyDSSSEntry 2 } awcDot11ChannelAutoEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true and awcDot11StationRole is roleAP, the radio will scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. After the scan, this station will establish its own BSS on the channel it considers to have the least probability of congestion. If false, this station always establishes its BSS on dot11CurrentChannel." DEFVAL { false } ::= { awcDot11PhyDSSSEntry 3 } awcDot11CurrentChannel OBJECT-TYPE SYNTAX INTEGER (1..14) MAX-ACCESS read-only STATUS current DESCRIPTION "The current operating frequency channel of the DSSS PHY, as selected either by selective scanning or via dot11CurrentChannel. Valid channel numbers are as defined in 15.4.6.2" REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, IEEE802dot11-MIB." ::= { awcDot11PhyDSSSEntry 4 } awcDot11SupportedDataRatesPrivacyTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11SupportedDataRatesPrivacyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "For each transmit and receive bit rate, whether or not the radio can support WEP encryption at that rate." ::= { awcDot11phy 11 } awcDot11SupportedDataRatesPrivacyEntry OBJECT-TYPE SYNTAX AwcDot11SupportedDataRatesPrivacyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the awcDot11SupportedDataRatesPrivacy Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex." INDEX {ifIndex, awcDot11SupportedDataRatesPrivacyIndex} ::= { awcDot11SupportedDataRatesPrivacyTable 1 } AwcDot11SupportedDataRatesPrivacyEntry ::= SEQUENCE { awcDot11SupportedDataRatesPrivacyIndex Integer32, awcDot11SupportedDataRatesPrivacyValue Integer32, awcDot11SupportedDataRatesPrivacyImplemented TruthValue } awcDot11SupportedDataRatesPrivacyIndex OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Index object which identifies which data rate to access. Range is 1..8." ::= { awcDot11SupportedDataRatesPrivacyEntry 1 } awcDot11SupportedDataRatesPrivacyValue OBJECT-TYPE SYNTAX Integer32 (2..127) MAX-ACCESS read-only STATUS current DESCRIPTION "The receive or transmit bit rates supported by the PLCP and PMD, represented by a count from X02-X7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s." ::= { awcDot11SupportedDataRatesPrivacyEntry 2 } awcDot11SupportedDataRatesPrivacyImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether or not WEP encryption is supported by the radio for both Transmit and Receive operations at the corresponding bit rate specified by awcDot11SupportedDataRatesPrivacyValue." ::= { awcDot11SupportedDataRatesPrivacyEntry 3 } awcDot11ChanSelectTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11ChanSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies for each 802.11 channel, whether the scanning process controlled by the awcDot11ChannelAutoEnabled can select a particular channel for use. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 15.4.6.2." ::= { awcDot11phy 12 } awcDot11ChanSelectEntry OBJECT-TYPE SYNTAX AwcDot11ChanSelectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry specifies if a particular radio channel is enabled on a radio interface." INDEX {ifIndex, awcDot11ChanSelectChannel} ::= { awcDot11ChanSelectTable 1 } AwcDot11ChanSelectEntry ::= SEQUENCE { awcDot11ChanSelectChannel INTEGER, awcDot11ChanSelectEnable TruthValue } awcDot11ChanSelectChannel OBJECT-TYPE SYNTAX INTEGER (1..14) MAX-ACCESS read-only STATUS current DESCRIPTION "802.11 channel which is a candidate for low-occupancy scanning." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, section 15.4.6.2." ::= { awcDot11ChanSelectEntry 1 } awcDot11ChanSelectEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, awcDot11ChanSelectChannel is available for the system to use as its awcDot11CurrentChannel after scanning for channel occupancy. If false, awcDot11ChanSelectChannel is not available." REFERENCE "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, LAN MAN Standards Committee of the IEEE Computer Society, IEEE802dot11-MIB." DEFVAL { true } ::= { awcDot11ChanSelectEntry 2 } -- ******************************************************************** -- * End of awc802dot11 parameters -- ******************************************************************** -- ******************************************************************** -- * awcUserMgr parameters -- ******************************************************************** userMgrConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF UserMgrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "System User attributes." ::= { awcUserMgr 1 } userMgrConfigEntry OBJECT-TYPE SYNTAX UserMgrConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the user manager table." INDEX {userMgrUserIndex} ::= { userMgrConfigTable 1 } UserMgrConfigEntry ::= SEQUENCE { userMgrUserIndex Unsigned32, userMgrUserName DisplayString, userMgrPassword OCTET STRING, userMgrCapabilities Unsigned32, userMgrStatus RowStatus } userMgrUserIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the user." ::= { userMgrConfigEntry 1 } userMgrUserName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the user. This should be unique across all users. Max. string length is 32 octets." ::= { userMgrConfigEntry 2 } userMgrPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..24)) MAX-ACCESS read-create STATUS current DESCRIPTION "The SHA-1 hashed password of the user in the user manager. When a plaintext password is written, it is automatically replaced by the SHA-1 Secure Hash of that plaintext, prefixed by a 4-octet magic cookie. Max. string length is 24 octets." ::= { userMgrConfigEntry 3 } userMgrCapabilities OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Bitmask of the capabilities of the user. The value may be any combination (sum) of the following capability values: 0 = none 1 = Administrator 2 = Write 4 = Firmware Update 8 = Identity Update 16 = SNMP Community" ::= { userMgrConfigEntry 4 } userMgrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the user. Allows deletion via SNMP." ::= { userMgrConfigEntry 5 } enableUserMgr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the User Manager subsystem is active. Web page, console, and SNMP access is restricted in accordance with userMgrCapabilities. If false, all users have full access to the system. " DEFVAL { false } ::= { awcUserMgr 2 } allowBrowseWithoutLogin OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the HTTP user interface to read-only web pages can be accessed without passing HTTP authentication. If false, any HTTP access requires the user to pass HTTP authentication." DEFVAL { true } ::= { awcUserMgr 3 } protectLegalPage OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Should the legal credits page be protected or not." DEFVAL { false } ::= { awcUserMgr 4 } -- ******************************************************************** -- * End of awcUserMgr parameters -- ******************************************************************** -- ******************************************************************** -- * awcHttpd parameters -- ******************************************************************** defaultWebRoot OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "File directory which contains the system's web site root file index.shm. Max. string length is 128 octets." DEFVAL { "mfs0:/StdUI/" } ::= { awcHttpd 1 } defaultHelpRoot OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "URL identifying the directory in which help pages for the system are located. This URL is prefixed to all help page links. Max. string length is 128 octets." DEFVAL { "http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/air/ap3xx" } ::= { awcHttpd 2 } getWebUI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of an auxilliary set of HTML user interface files to be loaded at system boot time from defaultFileServer. Archive formats accepted include .tar and .tar.gz. Max. string length is 128 octets." DEFVAL { "" } ::= { awcHttpd 3 } cmdInvokeGetWebUI OBJECT-TYPE SYNTAX AwcInvokeCommand MAX-ACCESS read-write STATUS current DESCRIPTION "Initiate loading of the getWebUI file. Commands recognized: start." ::= { awcHttpd 4 } cmdStatusGetWebUI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the most recent command to load the auxilliary web User Interface pages. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = File not found on the file server. 12 = Insufficient memory to load all files. 20 = Identifier encountered while decoding is an ordinary file, not a directory. 22 = No file specified, or invalid file format. 35 = File format is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled." ::= { awcHttpd 5 } awcHttpdPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IP port number over which to perform HTTP operations." DEFVAL { 80 } ::= { awcHttpd 6 } awcConsoleAutoApply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The current state of 'auto apply' mode on the console browser." DEFVAL { true } ::= { awcHttpd 7 } -- ******************************************************************** -- * End of awcHttpd parameters -- ******************************************************************** -- ******************************************************************** -- * awcDnsRes parameters -- ******************************************************************** resolverDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the resolver domain currently in use by the system. Max. string length of 128 octets." DEFVAL { "" } ::= { awcDnsRes 1 } resolverDomainSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The suffix name of the resolver domain. Used to abbreviate displayed host names. Max. string length is 128 octets." DEFVAL { "" } ::= { awcDnsRes 2 } resolverDomainServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ResolverDomainServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DNS Name Servers currently in use by the system." ::= { awcDnsRes 3 } resolverDomainServerEntry OBJECT-TYPE SYNTAX ResolverDomainServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in resolverDomainServerTable." INDEX {resolverDomainServerPriority} ::= { resolverDomainServerTable 1 } ResolverDomainServerEntry ::= SEQUENCE { resolverDomainServerPriority INTEGER, resolverDomainServer DisplayString} resolverDomainServerPriority OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority order in which a domain name server is queried." ::= { resolverDomainServerEntry 1 } resolverDomainServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of a domain name server currently in use by the system." ::= { resolverDomainServerEntry 2 } defaultResolverDomain OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the resolver domain to be used by the system unless overridden by a BOOTP or DHCP server. Max. string length of 128 octets." DEFVAL { "" } ::= { awcDnsRes 4 } defaultResolverDomainServerTable OBJECT-TYPE SYNTAX SEQUENCE OF DefaultResolverDomainServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DNS Name Servers to be used by the system unless overridden by a BOOTP or DHCP server." ::= { awcDnsRes 5 } defaultResolverDomainServerEntry OBJECT-TYPE SYNTAX DefaultResolverDomainServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in defaultResolverDomainServerTable." INDEX {defaultResolverDomainServerPriority} ::= { defaultResolverDomainServerTable 1 } DefaultResolverDomainServerEntry ::= SEQUENCE { defaultResolverDomainServerPriority INTEGER, defaultResolverDomainServer DisplayString} defaultResolverDomainServerPriority OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority order in which a domain name server is queried." ::= { defaultResolverDomainServerEntry 1 } defaultResolverDomainServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of a domain name server to be used by the system unless overridden by a BOOTP or DHCP server." ::= { defaultResolverDomainServerEntry 2 } -- ******************************************************************** -- * End of awcDnsRes parameters -- ******************************************************************** -- ******************************************************************** -- * awcSnmp parameters -- ******************************************************************** snmpTrapDest OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination of an SNMP trap. This may be any DNS-recognizable IP address. Max. string length is 128 octets." DEFVAL { "" } ::= { awcSnmp 1 } snmpTrapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community name of the trap. Max. string length is 128 octets." DEFVAL { "" } ::= { awcSnmp 2 } -- ******************************************************************** -- * End of awcSnmp parameters -- ******************************************************************** -- ******************************************************************** -- * awcSntp parameters -- ******************************************************************** defaultSntpServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the SNTP server to be use by the system, unless overridden by a BOOTP or DHCP server. Max. string length is 128 octets." DEFVAL { "" } ::= { awcSntp 1 } sntpServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the SNTP server currently in use by the system. Max. string length is 128 octets." ::= { awcSntp 2 } -- ******************************************************************** -- * End of awcSntp parameters -- ******************************************************************** -- ******************************************************************** -- * awcForwardTbl parameters -- ******************************************************************** awcFtStatistics OBJECT IDENTIFIER ::= {awcForwardTbl 1} awcFtMcastAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of multicast addresses observed by the system." ::= { awcFtStatistics 1 } awcFtDsHost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of DS (infrastructure) host addresses observed by the system over its own DS network interface (Ethernet)." ::= { awcFtStatistics 3 } awcFtBridgeHost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of DS (infrastructure) host addresses observed by the system on the remote side of a bridge." ::= { awcFtStatistics 5 } awcFtClientSTA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Client Station addresses observed by the system." ::= { awcFtStatistics 7 } awcFtClientSTASelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Client Stations which are Associated to the system." ::= { awcFtStatistics 8 } awcFtBridge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of non-root Bridge addresses observed by the system." ::= { awcFtStatistics 9 } awcFtBridgeSelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of non-root Bridges which are Associated to the system." ::= { awcFtStatistics 10 } awcFtRepeater OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Repeater addresses observed by the system." ::= { awcFtStatistics 11 } awcFtRepeaterSelf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Repeater devices which are Associated to the system." ::= { awcFtStatistics 12 } awcFtAccessPoint OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Access Point addresses observed by the system." ::= { awcFtStatistics 13 } awcFtBridgeRoot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Root Bridge addresses observed by the system." ::= { awcFtStatistics 15 } awcFtConfig OBJECT IDENTIFIER ::= {awcForwardTbl 2} awcFtMaxNumEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of entries in the forwarding table. Must be a power of 2 from 1024 to 65536. The number of entries controls the size of the forwarding table and the hash algorithm used by the forwarding table. Changing the number of entries requires a system reboot." DEFVAL { 8192 } ::= { awcFtConfig 1 } awcFtTimeoutSecUnknown OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=unknown will remain in the Forwarding Table before being staled-out." DEFVAL { 300 } ::= { awcFtConfig 2 } awcFtTimeoutSecMcastAddr OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=multicast will remain in the Forwarding Table before being staled-out." DEFVAL { 28800 } ::= { awcFtConfig 3 } awcFtTimeoutSecDsHost OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=dsHost will remain in the Forwarding Table before being staled-out." DEFVAL { 1800 } ::= { awcFtConfig 4 } awcFtTimeoutSecBridgeHost OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=bridgeHost will remain in the Forwarding Table before being staled-out." DEFVAL { 1800 } ::= { awcFtConfig 5 } awcFtTimeoutSecClientSTA OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=clientStation will remain in the Forwarding Table before being staled-out." DEFVAL { 1800 } ::= { awcFtConfig 6 } awcFtTimeoutSecBridge OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=bridge will remain in the Forwarding Table before being staled-out." DEFVAL { 28800 } ::= { awcFtConfig 7 } awcFtTimeoutSecRepeater OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=repeater will remain in the Forwarding Table before being staled-out." DEFVAL { 28800 } ::= { awcFtConfig 8 } awcFtTimeoutSecAccessPoint OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=accessPoint will remain in the Forwarding Table before being staled-out." DEFVAL { 28800 } ::= { awcFtConfig 9 } awcFtTimeoutSecBridgeRoot OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The default number of seconds an Entry with awcTpFdbClassID=bridgeRoot will remain in the Forwarding Table before being staled-out." DEFVAL { 28800 } ::= { awcFtConfig 10 } awcFtEnableAwcTpFdbTable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the system will populate the awcTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the awcTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization." DEFVAL { true } ::= { awcFtConfig 11 } awcFtEnableMacAuthServer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the system will contact a AAA server for retrieving dot1dStaticTable information for new forwarding table entries if a dot1dStaticTable entry does not already exist for the host address." DEFVAL { false } ::= { awcFtConfig 12 } awcFtRogueApAlertTimeout OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum number of minutes after a Possible Rogue status is reported about a device before another Possible Rogue status report is issued by this system about the same device." DEFVAL { 30 } ::= { awcFtConfig 13 } awcFtEnableMacOrEapAuth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the system grants full access to those clients which have successfully completed either MAC or EAP authentication." DEFVAL { false } ::= { awcFtConfig 14 } awcFtDot1dTpFdbTableEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the system will populate the dot1dTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the dot1dTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization." DEFVAL { true } ::= { awcFtConfig 15 } awcFtEnableMcastMapping OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the system will map multicast forwarding table entries to the broadcast entry. This improves speed and memory utilization. If false, the system will create an entry for each unique multicast address. This improves management statistics and allows filtering of specific multicast addresses." DEFVAL { false } ::= { awcFtConfig 16 } AwcTpFdbClassID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Description of the general 802.11 classification of a host." SYNTAX INTEGER { unknown(1), multicast(2), dsHost(3), bridgeHost(4), clientStation(5), bridge(6), repeater(7), accessPoint(8), bridgeRoot(9) } awcTpFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcTpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function for maintaining statistics about each entry." ::= { awcForwardTbl 3 } awcTpFdbEntry OBJECT-TYPE SYNTAX AwcTpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific MAC address for which the bridge has some forwarding and/or filtering information." INDEX { awcTpFdbAddress } ::= { awcTpFdbTable 1 } AwcTpFdbEntry ::= SEQUENCE { awcTpFdbAddress MacAddress, awcTpFdbClassID AwcTpFdbClassID, awcTpFdbSrcPktsImmed Counter32, awcTpFdbSrcOctetsImmed Counter32, awcTpFdbSrcErrorPktsImmed Counter32, awcTpFdbSrcErrorOctetsImmed Counter32, awcTpFdbDestPktsImmed Counter32, awcTpFdbDestOctetsImmed Counter32, awcTpFdbDestErrorPktsImmed Counter32, awcTpFdbDestErrorOctetsImmed Counter32, awcTpFdbDestMaxRetryErrorsImmed Counter32, awcTpFdbIPv4Addr IpAddress } awcTpFdbAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A MAC address for which the bridge has forwarding and/or filtering information." ::= { awcTpFdbEntry 1 } awcTpFdbClassID OBJECT-TYPE SYNTAX AwcTpFdbClassID MAX-ACCESS read-only STATUS current DESCRIPTION "Observed general 802.11 classification of the entry." ::= { awcTpFdbEntry 2 } awcTpFdbSrcPktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed packets for which this entry was the source." ::= { awcTpFdbEntry 3 } awcTpFdbSrcOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed octets for which this entry was the source." ::= { awcTpFdbEntry 4 } awcTpFdbSrcErrorPktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed error packets for which this entry was the source." ::= { awcTpFdbEntry 5 } awcTpFdbSrcErrorOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed error octets for which this entry was the source." ::= { awcTpFdbEntry 6 } awcTpFdbDestPktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed packets for which this entry was the destination." ::= { awcTpFdbEntry 7 } awcTpFdbDestOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed octets for which this entry was the destination." ::= { awcTpFdbEntry 8 } awcTpFdbDestErrorPktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed error packets for which this entry was the destination. This count includes awcTpFdbDestMaxRetryErrorsImmed." ::= { awcTpFdbEntry 9 } awcTpFdbDestErrorOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed error octets for which this entry was the destination." ::= { awcTpFdbEntry 10 } awcTpFdbDestMaxRetryErrorsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of observed max-retry error packets for which this entry was the destination." ::= { awcTpFdbEntry 11 } awcTpFdbIPv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Observed IPv4 network address of the entry." ::= { awcTpFdbEntry 16 } AwcDdpProdDevID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Aironet DDP Product Device ID of a host." SYNTAX INTEGER { tokenRingAP(74), ethernetAP(76), ethernetBridge(77), tokenRingBridge(78), pc3000Client(84), serialUC(85), ethernetUC(86), pc3500Client(101), pc4500Client(102), generic80211Client(104), pc4800Client(109), pc3100Client(110), mc(111), ethernetClient(112), pc2500Client(113), pc4800bClient(117), euc(120), homeAP(121), eucNoDiversity(122), emcNoDiversity(123), emc(124), series350Client(127), series370Client(128), multicast(240), unknown(241), tokenRingHost(253), ethernetHost(255) } AwcDdpRadioDevID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Aironet DDP Radio Device ID of a host." SYNTAX INTEGER { unknown(0), tma900(1), tma2400(2), pc3500(3), pc3000(4), tma2040(5), pc4500(6), pc4800(12), pc3100(13), series350(34), series370(35) } awcTpFdbDdpTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcTpFdbDdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only Aironet-specific information about each entry." ::= { awcForwardTbl 4 } awcTpFdbDdpEntry OBJECT-TYPE SYNTAX AwcTpFdbDdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific MAC address for which the bridge has some forwarding and/or filtering information." INDEX { awcTpFdbDdpAddress } ::= { awcTpFdbDdpTable 1 } AwcTpFdbDdpEntry ::= SEQUENCE { awcTpFdbDdpAddress MacAddress, awcTpFdbDdpSysName DisplayString, awcTpFdbDdpProdDevID AwcDdpProdDevID, awcTpFdbDdpRadioDevID AwcDdpRadioDevID, awcTpFdbDdpSwVerMajor INTEGER, awcTpFdbDdpSwVerMinor INTEGER, awcTpFdbDdpSwVerBeta INTEGER, awcTpFdbDdpUptime Unsigned32, awcTpFdbDdpNumAnnounceSent Unsigned32, awcTpFdbDdpNumAssociated INTEGER, awcTpFdbDdpLoad INTEGER, awcTpFdbDdpDistFromDS INTEGER } awcTpFdbDdpAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A MAC address for which the bridge has forwarding and/or filtering information." ::= { awcTpFdbDdpEntry 1 } awcTpFdbDdpSysName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP System Name of the entry." ::= { awcTpFdbDdpEntry 2 } awcTpFdbDdpProdDevID OBJECT-TYPE SYNTAX AwcDdpProdDevID MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP Product Device ID of the entry." ::= { awcTpFdbDdpEntry 3 } awcTpFdbDdpRadioDevID OBJECT-TYPE SYNTAX AwcDdpRadioDevID MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP Radio Device ID of the entry." ::= { awcTpFdbDdpEntry 4 } awcTpFdbDdpSwVerMajor OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP Major Software Version Number of the entry. If unknown, the value 0 is returned." ::= { awcTpFdbDdpEntry 5 } awcTpFdbDdpSwVerMinor OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP Minor Software Version Number of the entry." ::= { awcTpFdbDdpEntry 6 } awcTpFdbDdpSwVerBeta OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Aironet DDP Beta Software Version Number of the entry. This number is always 0 for officially-released software." ::= { awcTpFdbDdpEntry 7 } awcTpFdbDdpUptime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds that the entry has been operational." ::= { awcTpFdbDdpEntry 8 } awcTpFdbDdpNumAnnounceSent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the entry itself believes that it has issued some form of Aironet DDP Presense Announcement. If this field decreases, the entry has probably been reset." ::= { awcTpFdbDdpEntry 9 } awcTpFdbDdpNumAssociated OBJECT-TYPE SYNTAX INTEGER (0..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Stations currently Associated with the entry." ::= { awcTpFdbDdpEntry 10 } awcTpFdbDdpLoad OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "An approximation of the percentage of offered vs. theoretically-available load on the host's radio interface." ::= { awcTpFdbDdpEntry 11 } awcTpFdbDdpDistFromDS OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Bridging Distance or Number of Hops between the entry and the backbone Distribution System (DS). If 0, the entry is directly connected to the DS." ::= { awcTpFdbDdpEntry 12 } AwcDot11ClientState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IEEE 802.11 Station Service State. state0 = Station not able to send any frames whatsoever. It is most likely not yet configured. state1 = Station can send Class 1 frames. It is Unauthenticated and Unassociated. state2 = Station can send Class 2 frames. It is Authenticated, but is as yet Unassociated. state3 = Station can send Class 3 frames. It is both Authenticated and Associated." SYNTAX INTEGER { state0(1), state1(2), state2(3), state3(4) } awcDot11TpFdbTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot11TpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only 802.11-specific information about each entry." ::= { awcForwardTbl 5 } awcDot11TpFdbEntry OBJECT-TYPE SYNTAX AwcDot11TpFdbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific MAC address for which the bridge has some forwarding and/or filtering information." INDEX { awcDot11TpFdbAddress } ::= { awcDot11TpFdbTable 1 } AwcDot11TpFdbEntry ::= SEQUENCE { awcDot11TpFdbAddress MacAddress, awcDot11TpFdbAID Unsigned32, awcDot11TpFdbClientState AwcDot11ClientState, awcDot11TpFdbTxShortRetries Counter32, awcDot11TpFdbTxLongRetries Counter32, awcDot11TpFdbLatestTxShortRetries Counter32, awcDot11TpFdbLatestTxLongRetries Counter32, awcDot11TpFdbRxWEPErrors Counter32, awcDot11TpFdbLatestRxSignalStrength Unsigned32, awcDot11TpFdbLatestRxSignalQuality Unsigned32, awcDot11TpFdbCapabilities Unsigned32, awcDot11TpFdbListenInterval Unsigned32, awcDot11TpFdbSupportedDataRates OCTET STRING, awcDot11TpFdbPreferredTxRate Unsigned32, awcDot11TpFdbCurrentBSS MacAddress, awcDot11TpFdbSSID INTEGER, awcDot11TpFdbVlanId AwcVlanId } awcDot11TpFdbAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A MAC address for which the bridge has forwarding and/or filtering information." ::= { awcDot11TpFdbEntry 1 } awcDot11TpFdbAID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "AID with which the Station is associated with this system, or 2008 if the Station is not currently known to be associated. If the entry is multicast, awcDot11TpFdbAID is 0. Note that the uplink from a Client or Repeater AP to its parent is always AID 1." ::= { awcDot11TpFdbEntry 2 } awcDot11TpFdbClientState OBJECT-TYPE SYNTAX AwcDot11ClientState MAX-ACCESS read-only STATUS current DESCRIPTION "802.11 Service State of the Station." ::= { awcDot11TpFdbEntry 3 } awcDot11TpFdbTxShortRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.11 Short Retries incurred across all packet Transmission Attempts to this Station." ::= { awcDot11TpFdbEntry 4 } awcDot11TpFdbTxLongRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.11 Long Retries incurred across all packet Transmission Attempts to this Station." ::= { awcDot11TpFdbEntry 5 } awcDot11TpFdbLatestTxShortRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 802.11 Short Retries incurred during the most recent packet Transmission Attempts to this Station." ::= { awcDot11TpFdbEntry 6 } awcDot11TpFdbLatestTxLongRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of 802.11 Long Retries incurred during the most recent packet Transmission Attempts to this Station." ::= { awcDot11TpFdbEntry 7 } awcDot11TpFdbRxWEPErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received from this Station which failed to be properly decrypted via the WEP security mechanism." ::= { awcDot11TpFdbEntry 8 } awcDot11TpFdbLatestRxSignalStrength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A device-dependent measure of the signal strength of the most recently received packet from this Station. Might be normalized or unnormalized." ::= { awcDot11TpFdbEntry 9 } awcDot11TpFdbLatestRxSignalQuality OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A device-dependent measure of the signal quality of the most recently received packet from this Station." ::= { awcDot11TpFdbEntry 10 } awcDot11TpFdbCapabilities OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The possible 802.11 capabilities of the Station's radio." ::= { awcDot11TpFdbEntry 11 } awcDot11TpFdbListenInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of beacon intervals across which a the Station will sleep in power-save mode, or 1 if the Station will never be in power-save mode." ::= { awcDot11TpFdbEntry 12 } awcDot11TpFdbSupportedDataRates OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..126)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 255, the lower seven bits 0..6 of which corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. If set, Bit 7 of the rate specification indicates that rate is a member of the Basic Rate Set of the access point." ::= { awcDot11TpFdbEntry 13 } awcDot11TpFdbPreferredTxRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmission rate at which a packet should currently be transmitted from an AP to this Station. This rate does not carry information about whether or not the rate is in the Basic Rate Set (i.e. bit 0x80 is never set)." ::= { awcDot11TpFdbEntry 14 } awcDot11TpFdbCurrentBSS OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "BSS to which the station is currently Associated, or 00:00:00:00:00:00 if the station's current AP is unknown." ::= { awcDot11TpFdbEntry 15 } awcDot11TpFdbSSID OBJECT-TYPE SYNTAX INTEGER (-1..2007) MAX-ACCESS read-only STATUS current DESCRIPTION "If the Station is Associated to this AP, the SSID via which the Station Associated. If 0, the Station Associated via dot11DesiredSSID. If greater than 0, the Station Associated through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11TpFdbSSID. If -1, the Station is not currently Associated to this AP." ::= { awcDot11TpFdbEntry 16 } awcDot11TpFdbVlanId OBJECT-TYPE SYNTAX AwcVlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Numeric ID of the VLAN over which the Station is communicating. If 0, the Station is not known to be communicating over any specific VLAN." ::= { awcDot11TpFdbEntry 17 } awcDot1dTpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDot1dTpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port that is associated with this transparent bridge. This table contains information about host and protocol filtering for the port. Each entry represents a transparent bridge port on the device. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent." ::= { awcForwardTbl 6 } awcDot1dTpPortEntry OBJECT-TYPE SYNTAX AwcDot1dTpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filtering information for each port of a transparent bridge. This information includes packet forwarding permission for unicast and non-unicast frames and filters ID used for the filtering." INDEX { dot1dTpPort } ::= { awcDot1dTpPortTable 1 } AwcDot1dTpPortEntry ::= SEQUENCE { awcDot1dTpPortDefaultUcastAllowedToGoTo OCTET STRING, awcDot1dTpPortDefaultNUcastAllowedToGoTo OCTET STRING, awcDot1dTpPortMaxNUcastPerSecond Unsigned32, awcDot1dTpPortDefaultInEthertypeFilterId Unsigned32, awcDot1dTpPortDefaultOutEthertypeFilterId Unsigned32, awcDot1dTpPortDefaultInIpProtoFilterId Unsigned32, awcDot1dTpPortDefaultOutIpProtoFilterId Unsigned32, awcDot1dTpPortDefaultInIpPortFilterId Unsigned32, awcDot1dTpPortDefaultOutIpPortFilterId Unsigned32 } awcDot1dTpPortDefaultUcastAllowedToGoTo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports to which frames received from a specific port and destined for a unicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length." ::= { awcDot1dTpPortEntry 1 } awcDot1dTpPortDefaultNUcastAllowedToGoTo OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports to which frames received from a specific port and destined for a multicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length." ::= { awcDot1dTpPortEntry 2 } awcDot1dTpPortMaxNUcastPerSecond OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of multicast packets allowed to be forwarded over the port each second. If 0, the number of multicasts is unlimited." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 3 } awcDot1dTpPortDefaultInEthertypeFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "awcPfEtSetId of the Ethertype Filter Set to apply to packets received over this port. If 0, no filters are applied." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 4 } awcDot1dTpPortDefaultOutEthertypeFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted over this port. If 0, no filters are applied." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 5 } awcDot1dTpPortDefaultInIpProtoFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "awcPfIppSetId of the IP Protocol Filter Set to apply to packets received over this port. If 0, no filters are applied." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 6 } awcDot1dTpPortDefaultOutIpProtoFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted over this port. If 0, no filters are applied." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 7 } awcDot1dTpPortDefaultInIpPortFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "awcPfIptSetId of the IP Port Filter Set to apply to packets received over this port. If 0, no filters are applied." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 8 } awcDot1dTpPortDefaultOutIpPortFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted over this port. If 0, no filters are applied." DEFVAL { 0 } ::= { awcDot1dTpPortEntry 9 } awcTpFdbAlertTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcTpFdbAlertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only packet-trace alert statistics. Each entry is indexed by a MAC address in the packet forwarding. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent." ::= { awcForwardTbl 7 } awcTpFdbAlertEntry OBJECT-TYPE SYNTAX AwcTpFdbAlertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific MAC address for which the bridge has some forwarding and/or filtering information." INDEX { awcTpFdbAlertAddress } ::= { awcTpFdbAlertTable 1 } AwcTpFdbAlertEntry ::= SEQUENCE { awcTpFdbAlertAddress MacAddress, awcTpFdbFromAlertSrcPktsImmed Counter32, awcTpFdbFromAlertSrcOctetsImmed Counter32, awcTpFdbToAlertDestPktsImmed Counter32, awcTpFdbToAlertDestOctetsImmed Counter32, awcTpFdbAlertSentAlertTypePktsImmed Counter32, awcTpFdbAlertSentAlertTypeOctetsImmed Counter32, awcTpFdbAlertRcvdAlertTypePktsImmed Counter32, awcTpFdbAlertRcvdAlertTypeOctetsImmed Counter32 } awcTpFdbAlertAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A MAC address for which the bridge has forwarding and/or filtering information." ::= { awcTpFdbAlertEntry 1 } awcTpFdbFromAlertSrcPktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table." ::= { awcTpFdbAlertEntry 2 } awcTpFdbFromAlertSrcOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table." ::= { awcTpFdbAlertEntry 3 } awcTpFdbToAlertDestPktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table." ::= { awcTpFdbAlertEntry 4 } awcTpFdbToAlertDestOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table." ::= { awcTpFdbAlertEntry 5 } awcTpFdbAlertSentAlertTypePktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter." ::= { awcTpFdbAlertEntry 6 } awcTpFdbAlertSentAlertTypeOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter." ::= { awcTpFdbAlertEntry 7 } awcTpFdbAlertRcvdAlertTypePktsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter." ::= { awcTpFdbAlertEntry 8 } awcTpFdbAlertRcvdAlertTypeOctetsImmed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter." ::= { awcTpFdbAlertEntry 9 } -- ******************************************************************** -- * End of awcForwardTbl parameters -- ******************************************************************** -- ******************************************************************** -- * awcEventLog parameters -- ******************************************************************** AwcEventSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Severity of an event handled within the system." SYNTAX INTEGER { systemFatal(2), protocolFatal(3), portFatal(4), systemAlert(5), protocolAlert(6), portAlert(7), externalAlert(8), systemWarning(9), protocolWarning(10), portWarning(11), externalWarning(12), systemInfo(13), protocolInfo(14), portInfo(15), externalInfo(16) } awcEventOffsetGMT OBJECT-TYPE SYNTAX Integer32 (-720..720) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The current offset from GMT in minutes." DEFVAL { -300 } ::= { awcEventLog 1 } awcEventUseDaylightSavingsTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, daylight savings time is used." DEFVAL { true } ::= { awcEventLog 2 } awcEventTimestampGMT OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "GMT Time, in seconds since January 1, 1970, when the system wall-clock time was last set." DEFVAL { 0 } ::= { awcEventLog 3 } awcEventUptimeModifiedGMT OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "System uptime, in seconds, when the system wall-clock time was last set." ::= { awcEventLog 4 } awcEventDisplayWallClockTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, time display on the system's web pages and console is in wall-clock time. If false, time display is in system uptime." DEFVAL { true } ::= { awcEventLog 5 } awcEventDisplayUptimeAscending OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, time display in system uptime is measured from the time the system boots, forward. If false, time display in measured from the current time backwards." DEFVAL { true } ::= { awcEventLog 6 } awcEventDetailDefault OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Detail level at which, by default, events are displayed. General detail level classifications are: 8 - no display at all 16 - sparse detail 24 - normal detail 32 - verbose detail 40 - exhaustive detail " DEFVAL { 24 } ::= { awcEventLog 7 } awcEventSeverityDispConsole OBJECT-TYPE SYNTAX AwcEventSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "If an event has a severity level greater than or equal to awcEventSeverityDispConsole, it is displayed on the console shortly after it occurs." DEFVAL { externalInfo } ::= { awcEventLog 8 } awcEventSeverityDispHtmlGUI OBJECT-TYPE SYNTAX AwcEventSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "If an event has a severity level greater than or equal to awcEventSeverityDispHtmlGUI, it is displayed on the the Event Log GUI web pages." DEFVAL { externalInfo } ::= { awcEventLog 9 } awcEventSeverityDispHtmlConsole OBJECT-TYPE SYNTAX AwcEventSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "If an event has a severity level greater than or equal to awcEventSeverityDispHtmlConsole, it is displayed on the the Event Log console browser pages." DEFVAL { externalInfo } ::= { awcEventLog 10 } awcEventAlertSNMP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, events of a severity with Disposition set to notify will generate an SNMP trap." DEFVAL { true } ::= { awcEventLog 11 } awcEventAlertSyslog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, events of a severity with Disposition set to notify will generate a sysLog message." DEFVAL { true } ::= { awcEventLog 12 } awcEventStatistics OBJECT IDENTIFIER ::= {awcEventLog 14} awcEventCntSeverityNULL OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "NULL message counter." ::= { awcEventStatistics 1 } awcEventCntSeveritySilent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Silent message counter." ::= { awcEventStatistics 2 } awcEventCntSeveritySystemFatal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fatal system message counter." ::= { awcEventStatistics 3 } awcEventCntSeverityProtocolFatal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fatal Protocol message counter." ::= { awcEventStatistics 4 } awcEventCntSeverityPortFatal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fatal Port message counter." ::= { awcEventStatistics 5 } awcEventCntSeveritySystemAlert OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Alert message counter." ::= { awcEventStatistics 6 } awcEventCntSeverityProtocolAlert OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol Alert message counter." ::= { awcEventStatistics 7 } awcEventCntSeverityPortAlert OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Alert message counter." ::= { awcEventStatistics 8 } awcEventCntSeverityExternalAlert OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "External Alert message counter." ::= { awcEventStatistics 9 } awcEventCntSeveritySystemWarning OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Warning message counter." ::= { awcEventStatistics 10 } awcEventCntSeverityProtocolWarning OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol Warning message counter." ::= { awcEventStatistics 11 } awcEventCntSeverityPortWarning OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Warning message counter." ::= { awcEventStatistics 12 } awcEventCntSeverityExternalWarning OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "External Warning message counter." ::= { awcEventStatistics 13 } awcEventCntSeveritySystemInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Info message counter." ::= { awcEventStatistics 14 } awcEventCntSeverityProtocolInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol Info message counter." ::= { awcEventStatistics 15 } awcEventCntSeverityPortInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Info message counter." ::= { awcEventStatistics 16 } awcEventCntSeverityExternalInfo OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "External Info message counter." ::= { awcEventStatistics 17 } awcEventDisposition OBJECT IDENTIFIER ::= {awcEventLog 15} awcEventDispSeverityNULL OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "NULL message disposition." ::= { awcEventDisposition 1 } awcEventDispSeveritySilent OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Silent message disposition." ::= { awcEventDisposition 2 } awcEventDispSeveritySystemFatal OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Fatal system message disposition." ::= { awcEventDisposition 3 } awcEventDispSeverityProtocolFatal OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Fatal Protocol message disposition." ::= { awcEventDisposition 4 } awcEventDispSeverityPortFatal OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Fatal Port message disposition." ::= { awcEventDisposition 5 } awcEventDispSeveritySystemAlert OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "System Alert message disposition." ::= { awcEventDisposition 6 } awcEventDispSeverityProtocolAlert OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Protocol Alert message disposition." ::= { awcEventDisposition 7 } awcEventDispSeverityPortAlert OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Port Alert message disposition." ::= { awcEventDisposition 8 } awcEventDispSeverityExternalAlert OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "External Alert message disposition." ::= { awcEventDisposition 9 } awcEventDispSeveritySystemWarning OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "System Warning message disposition." ::= { awcEventDisposition 10 } awcEventDispSeverityProtocolWarning OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Protocol Warning message disposition." ::= { awcEventDisposition 11 } awcEventDispSeverityPortWarning OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Port Warning message disposition." ::= { awcEventDisposition 12 } awcEventDispSeverityExternalWarning OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "External Warning message disposition." ::= { awcEventDisposition 13 } awcEventDispSeveritySystemInfo OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "System Info message disposition." ::= { awcEventDisposition 14 } awcEventDispSeverityProtocolInfo OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Protocol Info message disposition." ::= { awcEventDisposition 15 } awcEventDispSeverityPortInfo OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Port Info message disposition." ::= { awcEventDisposition 16 } awcEventDispSeverityExternalInfo OBJECT-TYPE SYNTAX AwcEventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "External Info message disposition." ::= { awcEventDisposition 17 } awcEventSyslogAddr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination of a sysLog message. This address must be numeric or DNS resolvable. Max. string length is 128 octets." DEFVAL { "" } ::= { awcEventLog 16 } awcEventSyslogFacility OBJECT-TYPE SYNTAX INTEGER (0..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "The facility number encoded within a sysLog message." DEFVAL { 16 } ::= { awcEventLog 17 } awcEventTraceStationSeverity OBJECT-TYPE SYNTAX AwcEventSeverity MAX-ACCESS read-write STATUS current DESCRIPTION "Severity at which all Detailed Packet Trace events shall be handled." DEFVAL { externalInfo } ::= { awcEventLog 20 } awcEventTraceLogSize OBJECT-TYPE SYNTAX Unsigned32 (0..8388608) MAX-ACCESS read-write STATUS current DESCRIPTION "Size in octets of the system Detailed Event Trace Buffer. Note that this buffer is statically allocated at system initialization time. Changing the size of the buffer requires a system reboot." DEFVAL { 0 } ::= { awcEventLog 21 } awcEventTracePacketLen OBJECT-TYPE SYNTAX Unsigned32 (0..2312) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum size in octets of each Packet Trace Event recorded in the Detailed Event Trace Buffer." DEFVAL { 0 } ::= { awcEventLog 22 } awcEventTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SNMP access to Event Log table." ::= { awcEventLog 23 } awcEventEntry OBJECT-TYPE SYNTAX AwcEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in awcEventTable." INDEX { awcEventID } ::= { awcEventTable 1 } AwcEventEntry ::= SEQUENCE { awcEventID Unsigned32, awcEventTime DisplayString, awcEventSeverity AwcEventSeverity, awcEventDescription DisplayString, awcEventType DisplayString } awcEventID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "System-unique identifier of the event." ::= { awcEventEntry 1 } awcEventTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "System time at which the event occurred." ::= { awcEventEntry 2 } awcEventSeverity OBJECT-TYPE SYNTAX AwcEventSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "Severity of the event." ::= { awcEventEntry 3 } awcEventDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Detailed description of the event." ::= { awcEventEntry 4 } awcEventType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specific type of the event. The type is unique for each test condition which can result in event generation." ::= { awcEventEntry 5 } awcEventUseCiscoFormat OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the system will generate syslog messages using Cisco standard EMBLEM- compliant format. If false, syslog will use legacy Aironet format." DEFVAL { false } ::= { awcEventLog 25 } awcDot11AuthenticateFailDisposition OBJECT-TYPE SYNTAX AwcDot11EventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how standard IEEE trap dot11AuthenticateFail is handled on the system." DEFVAL { eventLogAndIeeeTrap} ::= { awcEventLog 26 } awcDot11DeauthenticateDisposition OBJECT-TYPE SYNTAX AwcDot11EventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how standard IEEE 802.11 trap dot11Deauthenticate is handled on the system." DEFVAL { eventLogAndIeeeTrap} ::= { awcEventLog 27 } awcDot11DisassociateDisposition OBJECT-TYPE SYNTAX AwcDot11EventDisposition MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how standard IEEE 802.11 trap dot11Disassociate is handled on the system." DEFVAL { eventLogAndIeeeTrap} ::= { awcEventLog 28 } -- ******************************************************************** -- * awcEtherMIB parameters -- ******************************************************************** awcEtherIfSpeedSelect OBJECT-TYPE SYNTAX INTEGER { tenBaseT(3), oneHundredBaseT(5), tenBaseTfull(6), oneHundredBaseTfull(7), autoDetect(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Requested Ethernet interface speed and duplex." DEFVAL { autoDetect } ::= { awcEtherMIB 1 } awcEtherDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), full(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Ethernet interface duplex, after any line negotiation has taken place." ::= { awcEtherMIB 5 } awcEtherCamSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of entries in the hardware Content Addressible Memory MAC address filter available to the Ethernet controller." ::= { awcEtherMIB 7 } awcEtherEnableSwCam OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Ethernet driver makes use of a Software Content Addressible Memory when making packet-forwarding decisions. When true, forwarding decisions are much faster, but network statistics collection is much coarser. If false, all packet-forwarding decisions are made by the higher-level packet-bridging logic." DEFVAL { false } ::= { awcEtherMIB 8 } awcEtherForcePortUnblock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Ethernet port has dot1dStpPortState forced to forwarding even when the Spanning Tree Protocol is not enabled. This provides rapid port re-establishment at the potential cost of not detecting network topology loops involving the Ethernet and other network interfaces such as the radio. If false, the Ethernet port is blocked whenever there exists the potential for a network topology loop and the Spanning Tree Protocol is not enabled to guard against such loops." DEFVAL { false } ::= { awcEtherMIB 9 } awcEtherLostEthernetSeconds OBJECT-TYPE SYNTAX INTEGER (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of seconds the system must detect loss of backbone connectivity (i.e. loss of Ethernet link and no active trunks available on any of the radios) before taking the action specified by awcEtherLostEthernetAction." DEFVAL { 2 } ::= { awcEtherMIB 10 } awcEtherLostEthernetAction OBJECT-TYPE SYNTAX INTEGER { noAction(1), switchRepeater(2), radioOff(3), restrictSSID(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Action taken by the system when a loss of backbone connectivity condition occurs for a period of time longer than awcEtherLostEthernetSeconds." DEFVAL { switchRepeater } ::= { awcEtherMIB 11 } awcEtherLostEthernetSSID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The single SSID index required by the system if awcEtherLostEthernetAction is restrictSSID and backbone connectivity is lost for a period of time longer than awcEtherLostEthernetSeconds. If 0, only Association to dot11DesiredSSID is allowed. If non-0, only Association to the auxiliary SSID with the corresponding awcDot11AuxSSIDIndex is allowed." DEFVAL { 0 } ::= { awcEtherMIB 12 } -- ******************************************************************** -- * awcPolicyGroups parameters -- ******************************************************************** awcPolGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPolGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of named groups of related protocol filters" ::= { awcPolicyGroups 1 } awcPolGrpEntry OBJECT-TYPE SYNTAX AwcPolGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in awcPolGrpTable." INDEX {awcPolGrpId} ::= { awcPolGrpTable 1 } AwcPolGrpEntry ::= SEQUENCE { awcPolGrpId Unsigned32, awcPolGrpName DisplayString, awcPolGrpStatus RowStatus, awcPolGrpInEthertypeFilterId Unsigned32, awcPolGrpOutEthertypeFilterId Unsigned32, awcPolGrpInIpProtoFilterId Unsigned32, awcPolGrpOutIpProtoFilterId Unsigned32, awcPolGrpInIpPortFilterId Unsigned32, awcPolGrpOutIpPortFilterId Unsigned32 } awcPolGrpId OBJECT-TYPE SYNTAX Unsigned32 (1..1023) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Numeric identifier of the Policy Group." ::= { awcPolGrpEntry 1 } awcPolGrpName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Descriptive name of the Policy Group. Max. string length is 64 octets." ::= { awcPolGrpEntry 2 } awcPolGrpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the entire Policy Group." ::= { awcPolGrpEntry 3 } awcPolGrpInEthertypeFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "awcPfEtSetId of the Ethertype Filter Set to apply to packets received subject to this policy. If 0, no filters are applied." DEFVAL { 0 } ::= { awcPolGrpEntry 4 } awcPolGrpOutEthertypeFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied." DEFVAL { 0 } ::= { awcPolGrpEntry 5 } awcPolGrpInIpProtoFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "awcPfIppSetId of the IP Protocol Filter Set to apply to packets received subject to this policy. If 0, no filters are applied." DEFVAL { 0 } ::= { awcPolGrpEntry 6 } awcPolGrpOutIpProtoFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied." DEFVAL { 0 } ::= { awcPolGrpEntry 7 } awcPolGrpInIpPortFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "awcPfIptSetId of the IP Port Filter Set to apply to packets received subject to this policy. If 0, no filters are applied." DEFVAL { 0 } ::= { awcPolGrpEntry 8 } awcPolGrpOutIpPortFilterId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied." DEFVAL { 0 } ::= { awcPolGrpEntry 9 } -- ******************************************************************** -- * awcDscpToCosMap parameters -- ******************************************************************** awcDscpToCosMapEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, IP packets which are not already classified with a non-default Class of Service (CoS) can be classified by reference to their Differentiated Services Code-Point (DSCP) value. If false, unclassified IP packets are not subject to DSCP classification." DEFVAL { false } ::= { awcPolicyGroups 2 } awcDscpToCosMapTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcDscpToCosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This (conceptual) table to statically map Differentiated Services Code-Point (DSCP) values to corresponding Class of Service (CoS) values." ::= { awcPolicyGroups 3 } awcDscpToCosMapEntry OBJECT-TYPE SYNTAX AwcDscpToCosMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry (conceptual row) in the Aironet DSCP To CoS mapping table to statically map a Differentiated Services Code-Point (DSCP) value to corresponding Class of Service (CoS) value." INDEX { awcDscpToCosMapDscp } ::= { awcDscpToCosMapTable 1 } AwcDscpToCosMapEntry ::= SEQUENCE { awcDscpToCosMapDscp INTEGER, awcDscpToCosMapCos INTEGER } awcDscpToCosMapDscp OBJECT-TYPE SYNTAX INTEGER (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The auxiliary variable used to identify instances of the columnar objects in the Aironet Differentiated Services Code-Point (DSCP) to Class of Service (CoS) Mapping Table. This variable directly corresponds to a Differentiated Services Code-Point, plus 1. The value may be used for marking a traffic stream." ::= { awcDscpToCosMapEntry 1 } awcDscpToCosMapCos OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "A value of Class of Service (CoS) mapped to the DSCP value awcDscpToCosMapDscp. This object corresponds directly to the 802.1D traffic category ID, plus 1. The matching values are therefore in the range 1 through 8. The value 0 indicates that no matching CoS is configured for the corresponding awcDscpToCosMapDscp." ::= { awcDscpToCosMapEntry 2 } -- ******************************************************************** -- * awcDdpIAPP parameters -- ******************************************************************** awcIappMcastIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast IP network address over which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 224.0.1.40." DEFVAL { 'E0000128'H } ::= { awcDdpIAPP 1 } awcIappPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "IP port identifier through which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 2887." DEFVAL { 2887 } ::= { awcDdpIAPP 2 } awcP802dot1XVersion OBJECT-TYPE SYNTAX INTEGER { d7(7), d8(8), d10(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Version of the 802.1X Protocol specification which the AP will apply for incoming and outgoing EAPOL traffic. Versions with 'd' designators are draft specifications. The 802.1x-2001 standard is the same as draft 10." DEFVAL { d10 } ::= { awcDdpIAPP 100 } -- ******************************************************************** -- * awcHotStandby parameters -- ******************************************************************** awcHotStandbyMACAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The MAC address of the target unit which is being monitored." DEFVAL { '000000000000'H } ::= { awcHotStandby 1 } awcHotStandbyPollingFrequency OBJECT-TYPE SYNTAX INTEGER (1..30) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency (in seconds) that the monitored target unit is being polled for testing its health." DEFVAL { 1 } ::= { awcHotStandby 2 } awcHotStandbyPollingTimeOut OBJECT-TYPE SYNTAX INTEGER (1..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The total time (in seconds) that the monitoring unit can tolerate the failure at polling the monitored target unit. After this duration, one more failure of the polling will trigger the standby unit to take the role of monitored unit." DEFVAL { 5 } ::= { awcHotStandby 3 } awcHotStandbyInHotStandby OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the current unit is in its monitoring mode, i.e., if the unit is or will be a hot standby device." DEFVAL { false } ::= { awcHotStandby 4 } AwcHotStandbyState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Hot standby state." SYNTAX INTEGER { running(0), initializing(1), stopped(2), notRunning(3) } awcHotStandbyState OBJECT-TYPE SYNTAX AwcHotStandbyState MAX-ACCESS read-only STATUS current DESCRIPTION "The current state, e.g., running, stopped, ... of the hotstandby." ::= { awcHotStandby 5 } awcHotStandbyStatus OBJECT-TYPE SYNTAX AwcHotStandbyStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current stateus, e.g., error, OK, ... of the hotstandby." ::= { awcHotStandby 6 } -- ********************************************************************** -- * awcAaa parameters -- ********************************************************************** awcAaaServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcAaaServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information of AAA servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent." ::= { awcAaa 1 } awcAaaServerEntry OBJECT-TYPE SYNTAX AwcAaaServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and authentication mechanisms supported." INDEX {awcAaaServerPriority} ::= { awcAaaServerTable 1 } AwcAaaServerEntry ::= SEQUENCE { awcAaaServerPriority INTEGER, awcAaaServerProtocol INTEGER, awcAaaServerName DisplayString, awcAaaServerPort Unsigned32, awcAaaServerTimeout Unsigned32, awcAaaClientName DisplayString, awcAaaServerSharedSecret DisplayString, awcAaaServer8021xCapabilityEnabled TruthValue, awcAaaServerMacAddrAuthEnabled TruthValue, awcAaaServerAdminAuthEnabled TruthValue, awcAaaServerMipAuthEnabled TruthValue, awcAaaServerMaxRetransmission Unsigned32 } awcAaaServerPriority OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups." ::= { awcAaaServerEntry 1 } awcAaaServerProtocol OBJECT-TYPE SYNTAX INTEGER {radius(1), tacacsPlus(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol used to communicate with the AAA server." ::= { awcAaaServerEntry 2 } awcAaaServerName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS-resolvable name or numeric IP address of the AAA server." ::= { awcAaaServerEntry 3 } awcAaaServerPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The IP port number of the AAA server." ::= { awcAaaServerEntry 4 } awcAaaServerTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time (in seconds) that an Access Point should wait for a response from the AAA server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAaaServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the AAA server are connected through a low-speed network and the awcAaaServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged requests that have not yet reached the server" ::= { awcAaaServerEntry 5 } awcAaaClientName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name the Access Point uses to identify itself when acting as the supplicant." ::= { awcAaaServerEntry 6 } awcAaaServerSharedSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The textual string shared between the AAA server and the access point, used to authenticate the messages delivered between them." ::= { awcAaaServerEntry 7 } awcAaaServer8021xCapabilityEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is this server to be used for 802.1X authentication?" ::= { awcAaaServerEntry 8 } awcAaaServerMacAddrAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is this server to be used for MAC-address authentication?" ::= { awcAaaServerEntry 9 } awcAaaServerAdminAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is this server to be used for AP Admin authentication?" ::= { awcAaaServerEntry 10 } awcAaaServerMipAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is this server to be used for Proxy Mobile IP authentication?" ::= { awcAaaServerEntry 11 } awcAaaServerMaxRetransmission OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of retransmission of a request. If an Access Point does not receive a response within awcAaaServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen temporarily." ::= { awcAaaServerEntry 12 } awcAcctServerTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcAcctServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides information of AAA accounting servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent." ::= { awcAaa 2 } awcAcctServerEntry OBJECT-TYPE SYNTAX AwcAcctServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and security mechanisms supported." INDEX {awcAcctServerPriority} ::= { awcAcctServerTable 1 } AwcAcctServerEntry ::= SEQUENCE { awcAcctServerPriority INTEGER, awcAcctServerProtocol INTEGER, awcAcctServerName DisplayString, awcAcctServerPort Unsigned32, awcAcctServerTimeout Unsigned32, awcAcctServerUpdateEnable TruthValue, awcAcctServerUpdateDelay Unsigned32, awcAcctClientName DisplayString, awcAcctSecureEnabled TruthValue, awcAcctGeneralEnabled TruthValue, awcAcctServerSharedSecret DisplayString, awcAcctServerMaxRetransmission Unsigned32 } awcAcctServerPriority OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups." ::= { awcAcctServerEntry 1 } awcAcctServerProtocol OBJECT-TYPE SYNTAX INTEGER {radius(1), tacacsPlus(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol used to communicate with the AAA server." ::= { awcAcctServerEntry 2 } awcAcctServerName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS-resolvable name or numeric IP address of the AAA server." ::= { awcAcctServerEntry 3 } awcAcctServerPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The IP port number of the AAA server." ::= { awcAcctServerEntry 4 } awcAcctServerTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time (in seconds) that an Access Point should wait for a response from the Accounting server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAcctServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the Accounting server are connected through a low-speed network and the awcAcctServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged accounting requests that have not yet reached the server" ::= { awcAcctServerEntry 5 } awcAcctServerUpdateEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is the Acct update to this server enabled?." ::= { awcAcctServerEntry 6 } awcAcctServerUpdateDelay OBJECT-TYPE SYNTAX Unsigned32 (60..2592000) MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time (in seconds) that the Access Point should send to the AAA server an update of accounting information." ::= { awcAcctServerEntry 7 } awcAcctClientName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name the Access Point uses to identify itself when acting as the supplicant." ::= { awcAcctServerEntry 8 } awcAcctSecureEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is this server to be used for accounting with security AUTH?" ::= { awcAcctServerEntry 9 } awcAcctGeneralEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Is this server to be used for accounting without security AUTH?" ::= { awcAcctServerEntry 10 } awcAcctServerSharedSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The textual string shared between the ACCT server and the access point, used to authenticate the messages delivered between them." ::= { awcAcctServerEntry 11 } awcAcctServerMaxRetransmission OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of retransmissions of an accounting request. If an Access Point does not receive a response within awcAcctServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen." ::= { awcAcctServerEntry 12 } awcAcctEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The boolean indicating if the accounting is enabled." DEFVAL { false } ::= { awcAcctConfig 1 } awcAcctStopDelayEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The boolean indicating if the accounting stop request should be delayed before sent." DEFVAL { true } ::= { awcAcctConfig 2 } awcAcctStopDelayTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The duration for the AP to delay sending the STOP message if any." DEFVAL { 2 } ::= { awcAcctConfig 3 } -- ********************************************************************** -- * awcAaaAuthConfig parameters - Common to all Authentication servers -- ********************************************************************** awcAaaAuthConfig OBJECT IDENTIFIER ::= { awcAaa 4 } awcAaaServerPrimaryReattemptPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "While the primary authentication server serving a given authentication function is not reachable, the duration, in minutes, at which the AP should reattempt to return to its primary server serving that authentication function. A value of zero indicates that primary authentication server reattempt is disabled." ::= { awcAaaAuthConfig 1 } awcAaaServerDot1xAuthCurrent OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the currently selected AAA server for 802.1X user authentication. A value of zero indicates that no authentication server is available to service 802.1X authentication function to this AP. The value of 1 to 4 indicates the corresponding server for 802.1X authentication." ::= { awcAaaAuthConfig 2 } awcAaaServerMacAddrAuthCurrent OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the currently selected AAA server for MAC address authentication. A value of zero indicates that no authentication server is available to service MAC address authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for MAC address authentication function." ::= { awcAaaAuthConfig 3 } awcAaaServerAdminAuthCurrent OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the currently selected AAA server for the Access Point administrator authentication function. A value of zero indicates that no authentication server is available to service admin login authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for the AP admin authentication function." ::= { awcAaaAuthConfig 4 } awcAaaServerMipAuthCurrent OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the currently selected AAA server used to retrieve authentication data requied for Proxy Mobile registration and authentication function. A value of zero indicates that no authentication server is available for this function. The value of 1 to 4 indicates the corresponding server in use for proxy mobile IP related authentication function." ::= { awcAaaAuthConfig 5 } -- ******************************************************************** -- * awcProtocolFilters parameters -- ******************************************************************** AwcPfDisposition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Designate whether a protocol should be forwarded or blocked, or should behave in the default manner of the associated network interface." SYNTAX INTEGER { forward(1), block(2), default(3) } AwcPfPriority ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Designate the 802.1P priority with which a protocol should be queued." SYNTAX INTEGER { default(1), background(2), spare(3), excellentEffort(4), controlledLoad(5), interactiveVideo(6), interactiveVoice(7), networkControl(8) } awcPrFltEthertypeSetTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPrFltEthertypeSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of static Ethertype Filters" ::= { awcProtocolFilters 1 } awcPrFltEthertypeSetEntry OBJECT-TYPE SYNTAX AwcPrFltEthertypeSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in awcPrFltEthertypeTable." INDEX {awcPfEtSetId} ::= { awcPrFltEthertypeSetTable 1 } AwcPrFltEthertypeSetEntry ::= SEQUENCE { awcPfEtSetId Unsigned32, awcPfEtSetName DisplayString, awcPfEtDefaultDisposition AwcPfDisposition, awcPfEtDefaultUcastTimeToLive Unsigned32, awcPfEtDefaultNUcastTimeToLive Unsigned32, awcPfEtSetStatus RowStatus } awcPfEtSetId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Numeric identifier of the static Ethertype filters set." ::= { awcPrFltEthertypeSetEntry 1 } awcPfEtSetName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Descriptive name of the static Ethertype filters set. Max. string length is 64 octets." ::= { awcPrFltEthertypeSetEntry 2 } awcPfEtDefaultDisposition OBJECT-TYPE SYNTAX AwcPfDisposition MAX-ACCESS read-create STATUS current DESCRIPTION "Default packet disposition of the static Ethertype filters set." DEFVAL { forward } ::= { awcPrFltEthertypeSetEntry 3 } awcPfEtDefaultUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults." DEFVAL { 0 } ::= { awcPrFltEthertypeSetEntry 4 } awcPfEtDefaultNUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults." DEFVAL { 0 } ::= { awcPrFltEthertypeSetEntry 5 } awcPfEtSetStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the entire static Ethertype filters set." ::= { awcPrFltEthertypeSetEntry 6 } awcPrFltEthertypeTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPrFltEthertypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of individual static Ethertype filters." ::= { awcProtocolFilters 2 } awcPrFltEthertypeEntry OBJECT-TYPE SYNTAX AwcPrFltEthertypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the individual static Ethertype filter table." INDEX {awcPfEtSetId, awcPfEtEthertype} ::= { awcPrFltEthertypeTable 1 } AwcPrFltEthertypeEntry ::= SEQUENCE { awcPfEtEthertype INTEGER, awcPfEtDisposition AwcPfDisposition, awcPfEtUserPriority AwcPfPriority, awcPfEtUcastTimeToLive Unsigned32, awcPfEtNUcastTimeToLive Unsigned32, awcPfEtAlert TruthValue, awcPfEtStatus RowStatus } awcPfEtEthertype OBJECT-TYPE SYNTAX INTEGER (1..255|1501..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethertype (protocol) to which this individual static filter applies" ::= { awcPrFltEthertypeEntry 1 } awcPfEtDisposition OBJECT-TYPE SYNTAX AwcPfDisposition MAX-ACCESS read-create STATUS current DESCRIPTION "Designation of how the protocol should be handled." DEFVAL { default } ::= { awcPrFltEthertypeEntry 2 } awcPfEtUserPriority OBJECT-TYPE SYNTAX AwcPfPriority MAX-ACCESS read-create STATUS current DESCRIPTION "Designation of the priority assigned to packets of the Ethertype." DEFVAL { default } ::= { awcPrFltEthertypeEntry 3 } awcPfEtUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults." DEFVAL { 0 } ::= { awcPrFltEthertypeEntry 4 } awcPfEtNUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults." DEFVAL { 0 } ::= { awcPrFltEthertypeEntry 5 } awcPfEtAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Should an alert be registered when a packet of this Ethertype is observed?" DEFVAL { false } ::= { awcPrFltEthertypeEntry 6 } awcPfEtStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the individual static Ethertype filters." ::= { awcPrFltEthertypeEntry 7 } awcPrFltIpProtocolSetTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPrFltIpProtocolSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of static IP Protocol Filters" ::= { awcProtocolFilters 3 } awcPrFltIpProtocolSetEntry OBJECT-TYPE SYNTAX AwcPrFltIpProtocolSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in awcPrFltIpProtocolTable." INDEX {awcPfIppSetId} ::= { awcPrFltIpProtocolSetTable 1 } AwcPrFltIpProtocolSetEntry ::= SEQUENCE { awcPfIppSetId Unsigned32, awcPfIppSetName DisplayString, awcPfIppDefaultDisposition AwcPfDisposition, awcPfIppDefaultUcastTimeToLive Unsigned32, awcPfIppDefaultNUcastTimeToLive Unsigned32, awcPfIppSetStatus RowStatus } awcPfIppSetId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Numeric identifier of the static IP Protocol filters set." ::= { awcPrFltIpProtocolSetEntry 1 } awcPfIppSetName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Descriptive name of the static IP Protocol filters set. Max. string length is 64 octets." ::= { awcPrFltIpProtocolSetEntry 2 } awcPfIppDefaultDisposition OBJECT-TYPE SYNTAX AwcPfDisposition MAX-ACCESS read-create STATUS current DESCRIPTION "Default packet disposition of the static IP Protocol filters set." DEFVAL { forward } ::= { awcPrFltIpProtocolSetEntry 3 } awcPfIppDefaultUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults." DEFVAL { 0 } ::= { awcPrFltIpProtocolSetEntry 4 } awcPfIppDefaultNUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults." DEFVAL { 0 } ::= { awcPrFltIpProtocolSetEntry 5 } awcPfIppSetStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the entire static IP Protocol filters set." ::= { awcPrFltIpProtocolSetEntry 6 } awcPrFltIpProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPrFltIpProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of individual static IP Protocol filters." ::= { awcProtocolFilters 4 } awcPrFltIpProtocolEntry OBJECT-TYPE SYNTAX AwcPrFltIpProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the individual static IP Protocol filter table." INDEX {awcPfIppSetId, awcPfIppIpProtocol} ::= { awcPrFltIpProtocolTable 1 } AwcPrFltIpProtocolEntry ::= SEQUENCE { awcPfIppIpProtocol INTEGER, awcPfIppDisposition AwcPfDisposition, awcPfIppUserPriority AwcPfPriority, awcPfIppUcastTimeToLive Unsigned32, awcPfIppNUcastTimeToLive Unsigned32, awcPfIppAlert TruthValue, awcPfIppStatus RowStatus } awcPfIppIpProtocol OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "IP Protocol to which this individual static filter applies" ::= { awcPrFltIpProtocolEntry 1 } awcPfIppDisposition OBJECT-TYPE SYNTAX AwcPfDisposition MAX-ACCESS read-create STATUS current DESCRIPTION "Designation of how the protocol should be handled." DEFVAL { default } ::= { awcPrFltIpProtocolEntry 2 } awcPfIppUserPriority OBJECT-TYPE SYNTAX AwcPfPriority MAX-ACCESS read-create STATUS current DESCRIPTION "Designation of the priority assigned to packets of the IP Protocol." DEFVAL { default } ::= { awcPrFltIpProtocolEntry 3 } awcPfIppUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults." DEFVAL { 0 } ::= { awcPrFltIpProtocolEntry 4 } awcPfIppNUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults." DEFVAL { 0 } ::= { awcPrFltIpProtocolEntry 5 } awcPfIppAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Should an alert be registered when a packet of this IP Protocol is observed?" DEFVAL { false } ::= { awcPrFltIpProtocolEntry 6 } awcPfIppStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the individual static IP Protocol filters." ::= { awcPrFltIpProtocolEntry 7 } awcPrFltIpPortSetTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPrFltIpPortSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of static IP Port Filters" ::= { awcProtocolFilters 5 } awcPrFltIpPortSetEntry OBJECT-TYPE SYNTAX AwcPrFltIpPortSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in awcPrFltIpPortTable." INDEX {awcPfIptSetId} ::= { awcPrFltIpPortSetTable 1 } AwcPrFltIpPortSetEntry ::= SEQUENCE { awcPfIptSetId Unsigned32, awcPfIptSetName DisplayString, awcPfIptDefaultDisposition AwcPfDisposition, awcPfIptDefaultUcastTimeToLive Unsigned32, awcPfIptDefaultNUcastTimeToLive Unsigned32, awcPfIptSetStatus RowStatus } awcPfIptSetId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Numeric identifier of the static IP Port filters set." ::= { awcPrFltIpPortSetEntry 1 } awcPfIptSetName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "Descriptive name of the static IP Port filters set. Max. string length is 64 octets." ::= { awcPrFltIpPortSetEntry 2 } awcPfIptDefaultDisposition OBJECT-TYPE SYNTAX AwcPfDisposition MAX-ACCESS read-create STATUS current DESCRIPTION "Default packet disposition of the static IP Port filters set." DEFVAL { forward } ::= { awcPrFltIpPortSetEntry 3 } awcPfIptDefaultUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults." DEFVAL { 0 } ::= { awcPrFltIpPortSetEntry 4 } awcPfIptDefaultNUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults." DEFVAL { 0 } ::= { awcPrFltIpPortSetEntry 5 } awcPfIptSetStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the entire static IP Port filters set." ::= { awcPrFltIpPortSetEntry 6 } awcPrFltIpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AwcPrFltIpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of individual static IP Port filters." ::= { awcProtocolFilters 6 } awcPrFltIpPortEntry OBJECT-TYPE SYNTAX AwcPrFltIpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the individual static IP Port filter table." INDEX {awcPfIptSetId, awcPfIptIpPort} ::= { awcPrFltIpPortTable 1 } AwcPrFltIpPortEntry ::= SEQUENCE { awcPfIptIpPort INTEGER, awcPfIptDisposition AwcPfDisposition, awcPfIptUserPriority AwcPfPriority, awcPfIptUcastTimeToLive Unsigned32, awcPfIptNUcastTimeToLive Unsigned32, awcPfIptAlert TruthValue, awcPfIptStatus RowStatus } awcPfIptIpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "IP Port to which this individual static filter applies" ::= { awcPrFltIpPortEntry 1 } awcPfIptDisposition OBJECT-TYPE SYNTAX AwcPfDisposition MAX-ACCESS read-create STATUS current DESCRIPTION "Designation of how the Port should be handled." DEFVAL { default } ::= { awcPrFltIpPortEntry 2 } awcPfIptUserPriority OBJECT-TYPE SYNTAX AwcPfPriority MAX-ACCESS read-create STATUS current DESCRIPTION "Designation of the priority assigned to packets of the IP Port." DEFVAL { default } ::= { awcPrFltIpPortEntry 3 } awcPfIptUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults." DEFVAL { 0 } ::= { awcPrFltIpPortEntry 4 } awcPfIptNUcastTimeToLive OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults." DEFVAL { 0 } ::= { awcPrFltIpPortEntry 5 } awcPfIptAlert OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Should an alert be registered when a packet of this IP Port is observed?" DEFVAL { false } ::= { awcPrFltIpPortEntry 6 } awcPfIptStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the individual static IP Port filters." ::= { awcPrFltIpPortEntry 7 } -- ******************************************************************** -- * awcMobileIP parameters -- ******************************************************************** enableMobileIP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point's proxy mobile IP service is enabled. If false, proxy mobile IP service is disabled." DEFVAL { true } ::= { awcMobileIP 1 } awcprimAAP OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The first AAP hostname or IP address from a list of 3 AAPs." ::= { awcMobileIP 2 } awcsec1AAP OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The second AAP hostname or IP address from a list of 3 AAPs." ::= { awcMobileIP 3 } awcsec2AAP OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The third AAP hostname or IP address from a list of 3 AAPs." ::= { awcMobileIP 4 } -- mipSATable mipSATable OBJECT-TYPE SYNTAX SEQUENCE OF MipSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Mobile IP Local SA Bindings table." ::= { awcMobileIP 5} mipSAEntry OBJECT-TYPE SYNTAX MipSAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of SA bindings for a range of IP Addresses." INDEX { mipSAIpStart } ::= { mipSATable 1 } MipSAEntry ::= SEQUENCE { mipSAIpStart IpAddress, mipSAIpEnd IpAddress, mipSAGroupSPI DisplayString, mipSAGroupKey DisplayString, mipSAStatus RowStatus } mipSAIpStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Starting IP Address of a range for the SA binding." ::= { mipSAEntry 1 } mipSAIpEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Ending IP Address of the range for the SA binding." ::= { mipSAEntry 2 } mipSAGroupSPI OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Group SPI for the range of IP Address in the Local SA binding" ::= { mipSAEntry 3 } mipSAGroupKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Group Key for the range of IP Address in the Local SA binding" ::= { mipSAEntry 4 } mipSAStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status of the pMIP SA. Allows deletion via SNMP." ::= { mipSAEntry 5 } awcmipDebug OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the Access Point's proxy mobile IP debug information is printed on the console. If false, debug messages are not printed." DEFVAL { true } ::= { awcMobileIP 6 } -- ******************************************************************** -- * awcEventLog Traps -- ******************************************************************** awcTrapLog NOTIFICATION-TYPE OBJECTS { awcEventTime, awcEventSeverity, awcEventDescription, awcEventType } STATUS current DESCRIPTION "SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true." ::= { aironet 4 } -- ******************************************************************** -- * End of awcEventLog parameters -- ******************************************************************** -- ******************************************************************** -- * awcExperimental parameters -- ******************************************************************** -- ******************************************************************** -- * End of awcExperimental parameters -- ******************************************************************** -- ******************************************************************** -- * Conformance information -- ******************************************************************** awcVxConformance OBJECT IDENTIFIER ::= { awcVx 100 } awcVxCompliances OBJECT IDENTIFIER ::= { awcVxConformance 1 } awcVxGroups OBJECT IDENTIFIER ::= { awcVxConformance 2 } -- ******************************************************************** -- * Compliance statements -- ******************************************************************** awcVxCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the awcVx group." MODULE -- this module MANDATORY-GROUPS { awcSystemGroup, bootconfigVxGroup, awcSerialDevGroup, awcFtpGroup, awcIfTableGroup, awc802dot11Group, awcUserMgrGroup, awcHttpdGroup, awcDnsResGroup, awcSnmpGroup, awcSntpGroup, awcForwardTblGroup, -- awcRipConfigGroup, awcEventLogGroup, awcEtherMIBGroup, awcDdpIAPPGroup, awcHotStandbyGroup, awcAaaGroup, awcProtocolFiltersGroup, awcMobileIpGroup } ::= { awcVxCompliances 1 } -- ******************************************************************** -- * Units of conformance -- ******************************************************************** awcSystemGroup OBJECT-GROUP OBJECTS { vxWorksVersion, creationDate, awcVxVersion, sysFlags, languageCode, awcDevID, awcDevIDtxt, enableHTTP, enableTelnet, enableSNMP, enableDnsResolver, enableSNTP, enableWDB, pingTxLen, awcFirstBoot, awcOemOUI, awcOemName, awcOemNameShort, awcOemHomeURL, enablePSPF, sysExceptionReboot, bootblockVersion, motherboardRevision, enableSTP, enableRebootKey, awcLocateUnit } STATUS current DESCRIPTION "Standard information to support operation of an Aironet Access Point such as versions, system flags, and what features are enabled." ::= { awcVxGroups 1 } bootconfigVxGroup OBJECT-GROUP OBJECTS { bootconfigBootProtocol, bootconfigReadINI, bootconfigServerConfigTimeout, bootconfigMultOfferTimeout, bootconfigReqLeaseDuration, bootconfigMinLeaseDuration, bootconfigDev, bootconfigClientAddr, bootconfigHostAddr, bootconfigBootFile, bootconfigSubnetMask, bootconfigGateway, bootconfigHostName, bootconfigClientName, bootconfigNameServerPriority, bootconfigNameServer, bootconfigDomainName, bootconfigSntpServer, bootconfigSaveServerResponse, bootconfigCmdInvokeIniLoad, bootconfigCmdStatusIniLoad, bootconfigDhcpClassID, bootconfigFileServerAddr, bootconfigLogServerAddr, bootconfigBootCount, bootconfigDhcpClientIdType, bootconfigDhcpClientIdValue } STATUS current DESCRIPTION "Standard information to support operation of the boot server." ::= { awcVxGroups 2 } awcSerialDevGroup OBJECT-GROUP OBJECTS { serialDevIndex, serialAdminStatus, serialOperStatus, serialBaud, serialParity, serialDataBits, serialStopBits, serialFlowControl, serialTerminalType, serialTerminalLines, serialTerminalColumns, serialDevFd } STATUS current DESCRIPTION "Standard information to support configuration of serial ports." ::= { awcVxGroups 3 } awcFtpGroup OBJECT-GROUP OBJECTS { defaultFileServer, awcFileXferProtocol, awcFileXferUser, awcFileXferPassword, awcFileXferCmdInvokeFileLoad, awcFileXferCmdStatusFileLoad, awcFileXferCmdInvokeFileSave, awcFileXferCmdStatusFileSave, awcFileXferFileFirmwareSystem, awcFileXferFileFirmwareRadio0, awcFileXferFileWebUI, awcFileXferFileFpgaPcmcia, awcFileXferTftpPort, awcFileXferFtpDirectory, awcFileXferFilesFLASH, awcFileXferFileFirmwareRadio1 } STATUS current DESCRIPTION "Standard information to support configuration of the FTP protocol." ::= { awcVxGroups 4 } awcIfTableGroup OBJECT-GROUP OBJECTS { awcIfDefaultPhysAddress, awcIfPhysAddress, awcIfAdoptPrimaryIdentity, awcIfDefaultIpAddress, awcIfDefaultIpNetMask, awcIfIpAddress, awcIfIpNetMask, awcIfMSDUMaxLength, awcIfOutDiscardsCoS0, awcIfOutDiscardsCoS1, awcIfOutDiscardsCoS2, awcIfOutDiscardsCoS3, awcIfOutDiscardsCoS4, awcIfOutDiscardsCoS5, awcIfOutDiscardsCoS6, awcIfOutDiscardsCoS7 } STATUS current DESCRIPTION "Standard information to support configuration of network interfaces." ::= { awcVxGroups 5 } awc802dot11Group OBJECT-GROUP OBJECTS { awcDot11StationRole, awcDot11PowerManagementSubMode, awcDot11UseAWCExtensions, awcDot11AllowAssocBroadcastSSID, awcDot11PrivacyOptionImplementedMaxRate, awcDot11DesiredBSSLength, awcDot11EnetEncapsulationDefault, awcDot11ForceReqFirmwareVersion, awcDot11BridgeSpacing, awcDot11DesiredSSIDMaxAssociatedSTA, awcDot11DesiredSSIDNumAssociatedSTA, awcDot11AuxiliarySSIDLength, awcDot11MultipleSSIDPerBSSImplemented, awcDot11SymbolExtensionsImplemented, awcDot11SymbolExtensionsEnabled, awcDot11DesiredSSIDMicAlgorithm, awcDot11DesiredSSIDWEPKeyPermuteAlgorithm, awcDot11DesiredSSIDInfrastructureWGB, awcDot11DesiredSSIDDefaultPolId, awcDot11DesiredSSIDDefaultVlanId, awcDot11DesiredSSIDEnableProxyMobileIP, awcDot11InfrastructureSSID, awcDot11QBSSElementImplemented, awcDot11QBSSElementEnabled, awcDot11InfrastructureSSIDExclusive, awcDot11SendIGMPGeneralQuery, awcDot11AuthenticationRequireEAP, awcDot11AuthenticationDefaultUcastAllowedToGoTo, awcDot11WEPDefaultKeyIndex, awcDot11WEPDefaultKeyLen, awcDot11WEPDefaultKeyValue, awcDot11WEPDefaultKeyMaxIndex, awcDot11AllowEncrypted, awcDot11WEPKeyMaxLen, awcDot11LEAPUserName, awcDot11LEAPPassword, awcDot11DesiredBSSIndex, awcDot11DesiredBSS, awcDot11AuxSSIDIndex, awcDot11AuxSSID, awcDot11AuxSSIDMaxAssociatedSTA, awcDot11AuxSSIDNumAssociatedSTA, awcDot11AuxSSIDDefaultPolId, awcDot11AuxSSIDDefaultVlanId, awcDot11AuxSSIDEnableProxyMobileIP, awcDot11AuxSSIDAuthAlgEnable, awcDot11AuxSSIDAuthAlgRequireEAP, awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo, awcDot11AssignedAID, awcDot11AssignedSTA, awcDot11FirmwareBootstrapVersion, awcDot11CurrentCarrierSet, awcDot11ModulationType, awcDot11PreambleType, awcDot11PHYType, awcDot11Compatible3100, awcDot11Compatible4500, awcDot11ChannelAutoImplemented, awcDot11ChannelAutoEnabled, awcDot11CurrentChannel, awcDot11SupportedDataRatesPrivacyIndex, awcDot11SupportedDataRatesPrivacyValue, awcDot11SupportedDataRatesPrivacyImplemented, awcDot11ChanSelectChannel, awcDot11ChanSelectEnable, awcDot11AssociatedStationCount, awcDot11AuthenticatedStationCount, awcDot11ReassociatedStationCount, awcDot11RoamedStationCount, awcDot11DeauthenticateCount, awcDot11DisassociateCount, awcDot11EncapPktsMMH, awcDot11DecapPktsMMH, awcDot11EncapErrorsMMH, awcDot11DecapErrorsMMH, awcDot11DecapExistsMMH, awcDot11DecapAccessMMH, awcDot11TxDeferEnergyCount, awcDot11RxMacCrcErrorCount, awcDot11SsidMismatchCount, awcDot11QoSCWmin, awcDot11QoSCWmax } STATUS current DESCRIPTION "Standard information to support configuration of the 802.11 protocol." ::= { awcVxGroups 6 } awcUserMgrGroup OBJECT-GROUP OBJECTS { userMgrUserIndex, userMgrUserName, userMgrPassword, userMgrCapabilities, userMgrStatus, enableUserMgr, allowBrowseWithoutLogin, protectLegalPage } STATUS current DESCRIPTION "Standard information to support configuration of the User Manager." ::= { awcVxGroups 7 } awcHttpdGroup OBJECT-GROUP OBJECTS { defaultWebRoot, defaultHelpRoot, getWebUI, cmdInvokeGetWebUI, cmdStatusGetWebUI, awcHttpdPort, awcConsoleAutoApply } STATUS current DESCRIPTION "Standard information to support configuration of the Web Server." ::= { awcVxGroups 8 } awcDnsResGroup OBJECT-GROUP OBJECTS { resolverDomain, resolverDomainSuffix, resolverDomainServerPriority, resolverDomainServer, defaultResolverDomain, defaultResolverDomainServerPriority, defaultResolverDomainServer } STATUS current DESCRIPTION "Standard information to support configuration of the DNS Resolver." ::= { awcVxGroups 9 } awcSnmpGroup OBJECT-GROUP OBJECTS { snmpTrapDest, snmpTrapCommunity } STATUS current DESCRIPTION "Standard information to support configuration of the SNMP protocol." ::= { awcVxGroups 10 } awcSntpGroup OBJECT-GROUP OBJECTS { defaultSntpServer, sntpServer } STATUS current DESCRIPTION "Standard information to support configuration of the SNTP protocol." ::= { awcVxGroups 11 } awcForwardTblGroup OBJECT-GROUP OBJECTS { awcFtMcastAddr, awcFtDsHost, awcFtBridgeHost, awcFtClientSTA, awcFtClientSTASelf, awcFtBridge, awcFtBridgeSelf, awcFtRepeater, awcFtRepeaterSelf, awcFtAccessPoint, awcFtBridgeRoot, awcFtMaxNumEntries, awcFtTimeoutSecUnknown, awcFtTimeoutSecMcastAddr, awcFtTimeoutSecDsHost, awcFtTimeoutSecBridgeHost, awcFtTimeoutSecClientSTA, awcFtTimeoutSecBridge, awcFtTimeoutSecRepeater, awcFtTimeoutSecAccessPoint, awcFtTimeoutSecBridgeRoot, awcFtEnableAwcTpFdbTable, awcFtEnableMacAuthServer, awcFtRogueApAlertTimeout, awcFtEnableMacOrEapAuth, awcFtDot1dTpFdbTableEnable, awcTpFdbAddress, awcTpFdbClassID, awcTpFdbSrcPktsImmed, awcTpFdbSrcOctetsImmed, awcTpFdbSrcErrorPktsImmed, awcTpFdbSrcErrorOctetsImmed, awcTpFdbDestPktsImmed, awcTpFdbDestOctetsImmed, awcTpFdbDestErrorPktsImmed, awcTpFdbDestErrorOctetsImmed, awcTpFdbDestMaxRetryErrorsImmed, awcTpFdbIPv4Addr, awcTpFdbDdpAddress, awcTpFdbDdpSysName, awcTpFdbDdpProdDevID, awcTpFdbDdpRadioDevID, awcTpFdbDdpSwVerMajor, awcTpFdbDdpSwVerMinor, awcTpFdbDdpSwVerBeta, awcTpFdbDdpUptime, awcTpFdbDdpNumAnnounceSent, awcTpFdbDdpNumAssociated, awcTpFdbDdpLoad, awcTpFdbDdpDistFromDS, awcDot11TpFdbAddress, awcDot11TpFdbAID, awcDot11TpFdbClientState, awcDot11TpFdbTxShortRetries, awcDot11TpFdbTxLongRetries, awcDot11TpFdbLatestTxShortRetries, awcDot11TpFdbLatestTxLongRetries, awcDot11TpFdbRxWEPErrors, awcDot11TpFdbLatestRxSignalStrength, awcDot11TpFdbLatestRxSignalQuality, awcDot11TpFdbCapabilities, awcDot11TpFdbListenInterval, awcDot11TpFdbSupportedDataRates, awcDot11TpFdbPreferredTxRate, awcDot11TpFdbCurrentBSS, awcDot11TpFdbSSID, awcDot11TpFdbVlanId, awcDot1dTpPortDefaultUcastAllowedToGoTo, awcDot1dTpPortDefaultNUcastAllowedToGoTo, awcDot1dTpPortMaxNUcastPerSecond, awcDot1dTpPortDefaultInEthertypeFilterId, awcDot1dTpPortDefaultOutEthertypeFilterId, awcDot1dTpPortDefaultInIpProtoFilterId, awcDot1dTpPortDefaultOutIpProtoFilterId, awcDot1dTpPortDefaultInIpPortFilterId, awcDot1dTpPortDefaultOutIpPortFilterId, awcTpFdbAlertAddress, awcTpFdbFromAlertSrcPktsImmed, awcTpFdbFromAlertSrcOctetsImmed, awcTpFdbToAlertDestPktsImmed, awcTpFdbToAlertDestOctetsImmed, awcTpFdbAlertSentAlertTypePktsImmed, awcTpFdbAlertSentAlertTypeOctetsImmed, awcTpFdbAlertRcvdAlertTypePktsImmed, awcTpFdbAlertRcvdAlertTypeOctetsImmed } STATUS current DESCRIPTION "Standard information to support configuration of the Forwarding Table." ::= { awcVxGroups 12 } -- awcRipConfigGroup OBJECT-GROUP -- OBJECTS { -- } -- STATUS current -- DESCRIPTION -- "Standard information to support configuration of the RIP -- Protocol." -- ::= { awcVxGroups 13 } awcEventLogGroup OBJECT-GROUP OBJECTS { awcEventOffsetGMT, awcEventUseDaylightSavingsTime, awcEventTimestampGMT, awcEventUptimeModifiedGMT, awcEventDisplayWallClockTime, awcEventDisplayUptimeAscending, awcEventDetailDefault, awcEventSeverityDispConsole, awcEventSeverityDispHtmlGUI, awcEventSeverityDispHtmlConsole, awcEventAlertSNMP, awcEventAlertSyslog, awcEventCntSeverityNULL, awcEventCntSeveritySilent, awcEventCntSeveritySystemFatal, awcEventCntSeverityProtocolFatal, awcEventCntSeverityPortFatal, awcEventCntSeveritySystemAlert, awcEventCntSeverityProtocolAlert, awcEventCntSeverityPortAlert, awcEventCntSeverityExternalAlert, awcEventCntSeveritySystemWarning, awcEventCntSeverityProtocolWarning, awcEventCntSeverityPortWarning, awcEventCntSeverityExternalWarning, awcEventCntSeveritySystemInfo, awcEventCntSeverityProtocolInfo, awcEventCntSeverityPortInfo, awcEventCntSeverityExternalInfo, awcEventDispSeverityNULL, awcEventDispSeveritySilent, awcEventDispSeveritySystemFatal, awcEventDispSeverityProtocolFatal, awcEventDispSeverityPortFatal, awcEventDispSeveritySystemAlert, awcEventDispSeverityProtocolAlert, awcEventDispSeverityPortAlert, awcEventDispSeverityExternalAlert, awcEventDispSeveritySystemWarning, awcEventDispSeverityProtocolWarning, awcEventDispSeverityPortWarning, awcEventDispSeverityExternalWarning, awcEventDispSeveritySystemInfo, awcEventDispSeverityProtocolInfo, awcEventDispSeverityPortInfo, awcEventDispSeverityExternalInfo, awcEventSyslogAddr, awcEventSyslogFacility, awcEventTraceStationSeverity, awcEventTraceLogSize, awcEventTracePacketLen, awcEventID, awcEventTime, awcEventSeverity, awcEventDescription, awcEventType, awcEventUseCiscoFormat, awcDot11AuthenticateFailDisposition, awcDot11DeauthenticateDisposition, awcDot11DisassociateDisposition } STATUS current DESCRIPTION "Standard information to support operation of the Event Log." ::= { awcVxGroups 14 } awcEtherMIBGroup OBJECT-GROUP OBJECTS { awcEtherIfSpeedSelect, awcEtherDuplex, awcEtherCamSize, awcEtherEnableSwCam, awcEtherForcePortUnblock } STATUS current DESCRIPTION "Standard information to support operation of the Ethernet Controller." ::= { awcVxGroups 15 } awcPolicyGroupsGroup OBJECT-GROUP OBJECTS { awcPolGrpName, awcPolGrpStatus, awcPolGrpInEthertypeFilterId, awcPolGrpOutEthertypeFilterId, awcPolGrpInIpProtoFilterId, awcPolGrpOutIpProtoFilterId, awcPolGrpInIpPortFilterId, awcPolGrpOutIpPortFilterId, awcDscpToCosMapEnable, -- awcDscpToCosMapDscp, awcDscpToCosMapCos } STATUS current DESCRIPTION "Standard information to support operation of Policy Groups." ::= { awcVxGroups 16 } awcDdpIAPPGroup OBJECT-GROUP OBJECTS { awcIappMcastIpAddr, awcIappPort, awcP802dot1XVersion } STATUS current DESCRIPTION "Standard information to support operation of the DDP and IAPP protocols." ::= { awcVxGroups 17 } awcHotStandbyGroup OBJECT-GROUP OBJECTS { awcHotStandbyMACAddr, awcHotStandbyPollingFrequency, awcHotStandbyPollingTimeOut, awcHotStandbyInHotStandby, awcHotStandbyState, awcHotStandbyStatus } STATUS current DESCRIPTION "Standard information to support operation of an AP in the Hot Standby mode." ::= { awcVxGroups 18 } awcAaaGroup OBJECT-GROUP OBJECTS { awcAaaServerPriority, awcAaaServerProtocol, awcAaaServerName, awcAaaServerPort, awcAaaServerTimeout, awcAaaClientName, awcAaaServerSharedSecret, awcAaaServer8021xCapabilityEnabled, awcAaaServerMacAddrAuthEnabled, awcAaaServerAdminAuthEnabled, awcAaaServerMipAuthEnabled, awcAaaServerMaxRetransmission, awcAcctServerPriority, awcAcctServerProtocol, awcAcctServerName, awcAcctServerPort, awcAcctServerTimeout, awcAcctServerUpdateEnable, awcAcctServerUpdateDelay, awcAcctClientName, awcAcctSecureEnabled, awcAcctGeneralEnabled, awcAcctServerSharedSecret, awcAcctServerMaxRetransmission, awcAcctEnable, awcAcctStopDelayEnable, awcAcctStopDelayTime, awcAaaServerPrimaryReattemptPeriod, awcAaaServerDot1xAuthCurrent, awcAaaServerMacAddrAuthCurrent, awcAaaServerAdminAuthCurrent, awcAaaServerMipAuthCurrent } STATUS current DESCRIPTION "Standard information to support configuration of RADIUS and TACACS+ client operation." ::= { awcVxGroups 19 } awcProtocolFiltersGroup OBJECT-GROUP OBJECTS { awcPfEtSetId, awcPfEtSetName, awcPfEtDefaultDisposition, awcPfEtDefaultUcastTimeToLive, awcPfEtDefaultNUcastTimeToLive, awcPfEtSetStatus, awcPfEtEthertype, awcPfEtDisposition, awcPfEtUserPriority, awcPfEtUcastTimeToLive, awcPfEtNUcastTimeToLive, awcPfEtAlert, awcPfEtStatus, awcPfIppSetId, awcPfIppSetName, awcPfIppDefaultDisposition, awcPfIppDefaultUcastTimeToLive, awcPfIppDefaultNUcastTimeToLive, awcPfIppSetStatus, awcPfIppIpProtocol, awcPfIppDisposition, awcPfIppUserPriority, awcPfIppUcastTimeToLive, awcPfIppNUcastTimeToLive, awcPfIppAlert, awcPfIppStatus, awcPfIptSetId, awcPfIptSetName, awcPfIptDefaultDisposition, awcPfIptDefaultUcastTimeToLive, awcPfIptDefaultNUcastTimeToLive, awcPfIptSetStatus, awcPfIptIpPort, awcPfIptDisposition, awcPfIptUserPriority, awcPfIptUcastTimeToLive, awcPfIptNUcastTimeToLive, awcPfIptAlert, awcPfIptStatus } STATUS current DESCRIPTION "Standard information to support configuration of static protocol filters on the AP." ::= { awcVxGroups 20 } awcMobileIpGroup OBJECT-GROUP OBJECTS { enableMobileIP, mipSAIpEnd, mipSAGroupSPI, mipSAGroupKey, mipSAStatus, awcmipDebug, awcprimAAP, awcsec1AAP, awcsec2AAP } STATUS current DESCRIPTION "Information to support configuration of proxy mobile IP on the AP." ::= { awcVxGroups 21 } awcEthernetLostGroup OBJECT-GROUP OBJECTS { awcEtherLostEthernetSeconds, awcEtherLostEthernetAction, awcEtherLostEthernetSSID } STATUS current DESCRIPTION "Information to support AP in case Ethernet connection is lost." ::= { awcVxGroups 22 } awc802dot11GroupExt1 OBJECT-GROUP OBJECTS { awcDot11NonRootMobility } STATUS current DESCRIPTION "Configuration information for IEEE 802.11 radio driver and firmware." ::= { awcVxGroups 23 } awcForwardTblGroupExt1 OBJECT-GROUP OBJECTS { awcFtEnableMcastMapping } STATUS current DESCRIPTION "Information to support configuration of the Forwarding Table." ::= { awcVxGroups 24 } awcTrapLogGroup NOTIFICATION-GROUP NOTIFICATIONS { awcTrapLog } STATUS current DESCRIPTION "SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true." ::= { awcVxGroups 100 } -- ******************************************************************** -- * End of units of conformance -- ******************************************************************** -- ******************************************************************** -- * End of awcVx MIB -- ******************************************************************** END