BayNetworks-IISIS-MIB device MIB details by Wellfleet
BayNetworks-IISIS-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing BayNetworks-IISIS-MIB.
| Vendor: | Wellfleet |
|---|---|
| Mib: | BayNetworks-IISIS-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
BayNetworks-IISIS-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, IpAddress, Gauge FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfIisisGroup FROM Wellfleet-COMMON-MIB; wfIisisGeneralGroup OBJECT IDENTIFIER ::= { wfIisisGroup 1 } wfIisisGeneralDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "'This value determines whether I-ISIS is configured'" DEFVAL { created } ::= { wfIisisGeneralGroup 1 } wfIisisGeneralDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "'The administrative status of I-ISIS in the router. The value 'enabled' denotes that the I-ISIS Process is active on at least one interface; 'disabled' disables it on all interfaces.'" DEFVAL { enabled } ::= { wfIisisGeneralGroup 2 } wfIisisGeneralState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), invalid(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "'The state of I-ISIS'" DEFVAL { down } ::= { wfIisisGeneralGroup 3 } wfIisisRouterId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value contains the system ID of this Intermediate System." ::= { wfIisisGeneralGroup 4 } wfIisisVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This read-only parameter identifies the version number of the IS-IS protocol to which this node conforms to." ::= { wfIisisGeneralGroup 5 } wfIisisRouterType OBJECT-TYPE SYNTAX INTEGER { l1only(1), l2only(2), l1l2(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether this system is L1 only router L2 only router or L1-L2 IS." DEFVAL { l1l2 } ::= { wfIisisGeneralGroup 6 } wfIisisSpfHoldDown OBJECT-TYPE SYNTAX INTEGER(0..60) ACCESS read-write STATUS mandatory DESCRIPTION "Hold Down Timer for the SPF (in seconds). The SPF will run at most once per hold down timer value. A value of 0 means no hold down." DEFVAL { 10 } ::= { wfIisisGeneralGroup 7 } wfIisisPrimaryLogMask OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "A parameter to specify which I-ISIS log messages should be logged. This will only effect the Primary I-ISIS gate. Each bit represents a message as defined below. A 1 in that bit location means to log it and a 0 means not to put that log message in the log. Changing this value will NOT restart I-ISIS, but will take effct immediately(if there are any messages to be logged. bit 31 bit 0 +---------------------------------------+ | | +---------------------------------------+ bit0 Trace Messages bit1 INFO Level messages bit2 debug level messages bit3 I-ISIS interface state change messages bit4 Nbr state changes bit5 self-origination of LSA's bit6 receipt of new LSA's bit7 changes to I-ISIS`s Routing Table bit8 Bad LS requests, Ack's, or updates bit9 receipt of less recent LSA's bit10 receipt of more recent self-originated LSA's bit11 receipt of MAxAge LSA's (i.e. LSA's being flushed) bit12 - 31 reserved " DEFVAL { 287 } ::= { wfIisisGeneralGroup 8 } wfIisisMaximumPath OBJECT-TYPE SYNTAX INTEGER(1..12) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of equal cost paths allowed for a network installed by OSPF." DEFVAL { 1 } ::= { wfIisisGeneralGroup 9 } wfIisisMaxAreas OBJECT-TYPE SYNTAX INTEGER(1..3) ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum allowable number of areas addresses for the domain that this router exists in." DEFVAL { 1 } ::= { wfIisisGeneralGroup 10 } wfIisisNumL1Lsps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 LSPS stored in the database" ::= { wfIisisGeneralGroup 11 } wfIisisNumL2Lsps OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 LSPS stored in the database" ::= { wfIisisGeneralGroup 12 } wfIisisCksumIsPdus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether ISIS PDUs will carry a checksum." DEFVAL { enabled } ::= { wfIisisGeneralGroup 13 } wfIisisL1LspPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This assigns a password such that only L1 Lsps with the matching password will be accepted. All L1 Lsps generated by this system will contain this string in the password option." ::= { wfIisisGeneralGroup 14 } wfIisisL2LspPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This assigns a password such that only L2 Lsps with the matching password will be accepted. All L2 Lsps generated by this system will contain this string in the password option." ::= { wfIisisGeneralGroup 15 } wfIisisAreaAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This Assigns the area address for this router. This field must be filled in. If the user doesn't enter a value, then assign 0x470005. Site Manager must force the user to enter at least a 3-byte value for this field." ::= { wfIisisGeneralGroup 16 } wfIisisAreaAddrAlias1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This Assigns the first area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length." ::= { wfIisisGeneralGroup 17 } wfIisisAreaAddrAlias2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This Assigns the second area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length." ::= { wfIisisGeneralGroup 18 } wfIisisL1CorruptedLsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Corrupted L1-Lsps Detected." ::= { wfIisisGeneralGroup 19 } wfIisisL2CorruptedLsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Corrupted L2-Lsps Detected." ::= { wfIisisGeneralGroup 20 } wfIisisL1LspDbOverLoads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the L1 Lsp Database Overload event has been generated." ::= { wfIisisGeneralGroup 21 } wfIisisL2LspDbOverLoads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the L2Lsp Database Overload event has been generated." ::= { wfIisisGeneralGroup 22 } wfIisisNearestL2Is OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the nearest L2 system in this area." ::= { wfIisisGeneralGroup 23 } wfIisisNumL1Routes OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 Routes." ::= { wfIisisGeneralGroup 24 } wfIisisNumL2Routes OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 Routes." ::= { wfIisisGeneralGroup 25 } wfIisisMinLSPGenerationInterval OBJECT-TYPE SYNTAX INTEGER(5..900) ACCESS read-write STATUS mandatory DESCRIPTION "Min time interval(in secs) before LSP generation" DEFVAL { 30 } ::= { wfIisisGeneralGroup 26 } wfIisisMaxLSPGenerationInterval OBJECT-TYPE SYNTAX INTEGER(150..27000) ACCESS read-write STATUS mandatory DESCRIPTION "Max time interval(in secs) before LSP generation" DEFVAL { 900 } ::= { wfIisisGeneralGroup 27 } wfIisisMaxAge OBJECT-TYPE SYNTAX INTEGER(300..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The lifetime of the lsp after which it will be considered expired" DEFVAL { 1200 } ::= { wfIisisGeneralGroup 28 } wfIisisMinLSPXmtInterval OBJECT-TYPE SYNTAX INTEGER(0..100) ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 5 } ::= { wfIisisGeneralGroup 29 } wfIisisPartialSNPInterval OBJECT-TYPE SYNTAX INTEGER(1..30) ACCESS read-write STATUS mandatory DESCRIPTION "" DEFVAL { 2 } ::= { wfIisisGeneralGroup 30 } wfIisisZeroAgeLifetime OBJECT-TYPE SYNTAX INTEGER(0..120) ACCESS read-write STATUS mandatory DESCRIPTION "If the remaining lifetime of an LSP reaches zero, the expired LSP will be kept in the database for this time (in seconds)" DEFVAL { 60 } ::= { wfIisisGeneralGroup 31 } wfIisisAgePend OBJECT-TYPE SYNTAX INTEGER(10..100) ACCESS read-write STATUS mandatory DESCRIPTION "The number of entries processed before this gate pends" DEFVAL { 50 } ::= { wfIisisGeneralGroup 32 } wfIisisCsnpBuildInterval OBJECT-TYPE SYNTAX INTEGER(10..1200) ACCESS read-write STATUS mandatory DESCRIPTION "The interval at which CSNPs are generated by the Designated IS" DEFVAL { 10 } ::= { wfIisisGeneralGroup 33 } wfIisisL2LspBufferSize OBJECT-TYPE SYNTAX INTEGER(256..16384) ACCESS read-write STATUS mandatory DESCRIPTION "The max size of the LSP generated by system" DEFVAL { 1497 } ::= { wfIisisGeneralGroup 34 } wfIisisL1SpfCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the L1 I-ISIS SPF algorithm has been run for this area." ::= { wfIisisGeneralGroup 35 } wfIisisL2SpfCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the L2 I-ISIS SPF algorithm has been run for this area." ::= { wfIisisGeneralGroup 36 } wfIisisAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIisisAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "-- The I-ISIS Area Data Structure contains information -- regarding the various areas. The interfaces and -- links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'I-ISIS Version 2, Section 6 The Area Data Structure'" ::= { wfIisisGroup 2 } wfIisisAreaEntry OBJECT-TYPE SYNTAX WfIisisAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.'" INDEX { wfIisisAreaId } ::= { wfIisisAreaTable 1 } WfIisisAreaEntry ::= SEQUENCE { wfIisisAreaDelete INTEGER, wfIisisAreaDisable INTEGER, wfIisisAreaState INTEGER, wfIisisAreaId IpAddress, wfIisisSpfCnt Counter } wfIisisAreaDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if the I-ISIS router is configured with this area." DEFVAL { created } ::= { wfIisisAreaEntry 1 } wfIisisAreaDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates the state of this area on the I-ISIS router." DEFVAL { enabled } ::= { wfIisisAreaEntry 2 } wfIisisAreaState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value indicates the state of the I-ISIS Area." DEFVAL { down } ::= { wfIisisAreaEntry 3 } wfIisisAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the I-ISIS backbone." ::= { wfIisisAreaEntry 4 } wfIisisSpfCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the I-ISIS SPF algorithm has been run for this area." ::= { wfIisisAreaEntry 5 } wfIisisL1LspHdrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIisisL1LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2 u_int32's so the inst_id len is 2." ::= { wfIisisGroup 3 } wfIisisL1LspHdrEntry OBJECT-TYPE SYNTAX WfIisisL1LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Record in the Level 1 Lsp Header Table" INDEX { wfIisisL1LspHdrLspId } ::= { wfIisisL1LspHdrTable 1 } WfIisisL1LspHdrEntry ::= SEQUENCE { wfIisisL1LspHdrLspId OCTET STRING, wfIisisL1LspHdrLifetime INTEGER, wfIisisL1LspHdrSeqnum INTEGER, wfIisisL1LspHdrFlags INTEGER, wfIisisL1LspHdrCksum OCTET STRING } wfIisisL1LspHdrLspId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "LSPID = Source ID + Pseudo-node ID + LSP number" ::= { wfIisisL1LspHdrEntry 1 } wfIisisL1LspHdrLifetime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp Lifetime" ::= { wfIisisL1LspHdrEntry 2 } wfIisisL1LspHdrSeqnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp sequence number" ::= { wfIisisL1LspHdrEntry 3 } wfIisisL1LspHdrFlags OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flags: P/ATT/LSPDBOL/IS type" ::= { wfIisisL1LspHdrEntry 4 } wfIisisL1LspHdrCksum OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Checksum" ::= { wfIisisL1LspHdrEntry 5 } wfIisisL2LspHdrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIisisL2LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2 u_int32's so the inst_id len is 2." ::= { wfIisisGroup 4 } wfIisisL2LspHdrEntry OBJECT-TYPE SYNTAX WfIisisL2LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Record in the Lsp Header Table" INDEX { wfIisisL2LspHdrLspId } ::= { wfIisisL2LspHdrTable 1 } WfIisisL2LspHdrEntry ::= SEQUENCE { wfIisisL2LspHdrLspId OCTET STRING, wfIisisL2LspHdrLifetime INTEGER, wfIisisL2LspHdrSeqnum INTEGER, wfIisisL2LspHdrFlags INTEGER, wfIisisL2LspHdrCksum OCTET STRING } wfIisisL2LspHdrLspId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "LSPID = Source ID + Pseudo-node ID + LSP number" ::= { wfIisisL2LspHdrEntry 1 } wfIisisL2LspHdrLifetime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp Lifetime" ::= { wfIisisL2LspHdrEntry 2 } wfIisisL2LspHdrSeqnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp sequence number" ::= { wfIisisL2LspHdrEntry 3 } wfIisisL2LspHdrFlags OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Flags: P/ATT/LSPDBOL/IS type" ::= { wfIisisL2LspHdrEntry 4 } wfIisisL2LspHdrCksum OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Checksum" ::= { wfIisisL2LspHdrEntry 5 } wfIisisIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIisisIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "-- I-ISIS Interface Table -- The I-ISIS Interface Table augments the ifTable with I-ISIS -- specific information. 'The I-ISIS Interface Table describes the interfaces from the viewpoint of I-ISIS.'" ::= { wfIisisGroup 5 } wfIisisIfEntry OBJECT-TYPE SYNTAX WfIisisIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "'The I-ISIS Interface Entry describes one interface from the viewpoint of I-ISIS.'" INDEX { wfIisisIfIpAddress, wfIisisAddressLessIf } ::= { wfIisisIfTable 1 } WfIisisIfEntry ::= SEQUENCE { wfIisisIfDelete INTEGER, wfIisisIfDisable INTEGER, wfIisisIfIpAddress IpAddress, wfIisisAddressLessIf INTEGER, wfIisisIfRouterLevel INTEGER, wfIisisIfL1DefaultMetric INTEGER, wfIisisIfL2DefaultMetric INTEGER, wfIisisIfL1DrPriority INTEGER, wfIisisIfL2DrPriority INTEGER, wfIisisIfHelloTimer INTEGER, wfIisisIfPassword DisplayString, wfIisisIfHelloMtuSize INTEGER, wfIisisIfIihHoldMultiplier INTEGER, wfIisisIfIshHoldMultiplier INTEGER, wfIisisIfType INTEGER, wfIisisIfCsnpTimer INTEGER } wfIisisIfDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable determines in an I-ISIS Interface has been configured on the router." DEFVAL { created } ::= { wfIisisIfEntry 1 } wfIisisIfDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "'The I-ISIS interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to I-ISIS.'" DEFVAL { enabled } ::= { wfIisisIfEntry 2 } wfIisisIfIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "'The IP address of this I-ISIS interface.'" ::= { wfIisisIfEntry 3 } wfIisisAddressLessIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'" ::= { wfIisisIfEntry 4 } wfIisisIfRouterLevel OBJECT-TYPE SYNTAX INTEGER { l1(1), l2(2), l1l2(3), ext(4), l2ext(6), l1l2ext(7), esisonly(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only." DEFVAL { l2 } ::= { wfIisisIfEntry 5 } wfIisisIfL1DefaultMetric OBJECT-TYPE SYNTAX INTEGER(1..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the default cost of using this circuit for L1 traffic." DEFVAL { 10 } ::= { wfIisisIfEntry 6 } wfIisisIfL2DefaultMetric OBJECT-TYPE SYNTAX INTEGER(1..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the default cost of using this circuit for L2 traffic." DEFVAL { 10 } ::= { wfIisisIfEntry 7 } wfIisisIfL1DrPriority OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This is the priority for this system to become L1 designated router on this LAN circuit." DEFVAL { 64 } ::= { wfIisisIfEntry 8 } wfIisisIfL2DrPriority OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This is the priority for this system to become L2 designated router on this LAN circuit." DEFVAL { 64 } ::= { wfIisisIfEntry 9 } wfIisisIfHelloTimer OBJECT-TYPE SYNTAX INTEGER(1..21845) ACCESS read-write STATUS mandatory DESCRIPTION "This is the period (secs) between IIH hello transmissions." DEFVAL { 10 } ::= { wfIisisIfEntry 10 } wfIisisIfPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password." ::= { wfIisisIfEntry 11 } wfIisisIfHelloMtuSize OBJECT-TYPE SYNTAX INTEGER(1..10000) ACCESS read-write STATUS mandatory DESCRIPTION "Configure Hello MTU size per I-ISIS interface This parameter has the following values/meanings: 1 - Use the MTU specified by IP 2 - Use the MTU of ethernet, regardless of what IP says > 2 - Use this value as the actual MTU. If the value is smaller than what I-ISIS needs as a minimum then the mtu specified by IP is used. For example, 3 would never be used as an MTU." DEFVAL { 1 } ::= { wfIisisIfEntry 12 } wfIisisIfIihHoldMultiplier OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier." DEFVAL { 3 } ::= { wfIisisIfEntry 13 } wfIisisIfIshHoldMultiplier OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier." DEFVAL { 3 } ::= { wfIisisIfEntry 14 } wfIisisIfType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), pointtopoint(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The IISIS interface type." DEFVAL { broadcast } ::= { wfIisisIfEntry 15 } wfIisisIfCsnpTimer OBJECT-TYPE SYNTAX INTEGER(10..600) ACCESS read-write STATUS mandatory DESCRIPTION "This is the period (in seconds) between CSNP transmissions." DEFVAL { 10 } ::= { wfIisisIfEntry 16 } wfIisisIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIisisIfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "-- I-ISIS Interface Stats Table. " ::= { wfIisisGroup 6 } wfIisisIfStatsEntry OBJECT-TYPE SYNTAX WfIisisIfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "'The information regarding a interface'." INDEX { wfIisisIfStatsIpAddress, wfIisisStatsAddressLessIf } ::= { wfIisisIfStatsTable 1 } WfIisisIfStatsEntry ::= SEQUENCE { wfIisisIfStatsIpAddress IpAddress, wfIisisStatsAddressLessIf INTEGER, wfIisisIfStatsState INTEGER, wfIisisIfStatsCct INTEGER, wfIisisIfStatsL1TxHellos Counter, wfIisisIfStatsL2TxHellos Counter, wfIisisIfStatsL1RxHellos Counter, wfIisisIfStatsL2RxHellos Counter, wfIisisIfStatsL1Drops Counter, wfIisisIfStatsL2Drops Counter, wfIisisIfStatsL1DesignatedRouter OCTET STRING, wfIisisIfStatsL2DesignatedRouter OCTET STRING, wfIisisIfStatsTxL1Lsp Counter, wfIisisIfStatsTxL2Lsp Counter, wfIisisIfStatsTxL1Csnp Counter, wfIisisIfStatsTxL2Csnp Counter, wfIisisIfStatsTxL1Psnp Counter, wfIisisIfStatsTxL2Psnp Counter, wfIisisIfStatsRxL1Lsp Counter, wfIisisIfStatsRxL2Lsp Counter, wfIisisIfStatsRxL1Csnp Counter, wfIisisIfStatsRxL2Csnp Counter, wfIisisIfStatsRxL1Psnp Counter, wfIisisIfStatsRxL2Psnp Counter, wfIisisIfStatsL1NbrCount Gauge, wfIisisIfStatsL2NbrCount Gauge, wfIisisIfStatsL1AdjCount Gauge, wfIisisIfStatsL2AdjCount Gauge } wfIisisIfStatsIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "'The IP address of this I-ISIS interface.'" ::= { wfIisisIfStatsEntry 1 } wfIisisStatsAddressLessIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'" ::= { wfIisisIfStatsEntry 2 } wfIisisIfStatsState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the circuit state is up or down." DEFVAL { down } ::= { wfIisisIfStatsEntry 3 } wfIisisIfStatsCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each known circuit." ::= { wfIisisIfStatsEntry 4 } wfIisisIfStatsL1TxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-ISIS Hello packets transmitted." ::= { wfIisisIfStatsEntry 5 } wfIisisIfStatsL2TxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-ISIS Hello packets transmitted." ::= { wfIisisIfStatsEntry 6 } wfIisisIfStatsL1RxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-ISIS Hello packets received." ::= { wfIisisIfStatsEntry 7 } wfIisisIfStatsL2RxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-ISIS Hello packets received." ::= { wfIisisIfStatsEntry 8 } wfIisisIfStatsL1Drops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-ISIS packets dropped because of invalid information in the packet." ::= { wfIisisIfStatsEntry 9 } wfIisisIfStatsL2Drops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-ISIS packets dropped because of invalid information in the packet." ::= { wfIisisIfStatsEntry 10 } wfIisisIfStatsL1DesignatedRouter OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the L1 Designated Router on this circuit." ::= { wfIisisIfStatsEntry 11 } wfIisisIfStatsL2DesignatedRouter OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the L2 Designated Router on this circuit." ::= { wfIisisIfStatsEntry 12 } wfIisisIfStatsTxL1Lsp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 LSPs(Link State Packet) transmitted." ::= { wfIisisIfStatsEntry 13 } wfIisisIfStatsTxL2Lsp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 LSPs(Link State Packet) transmitted." ::= { wfIisisIfStatsEntry 14 } wfIisisIfStatsTxL1Csnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 CSNPs(Complete sequence no. packet) transmitted." ::= { wfIisisIfStatsEntry 15 } wfIisisIfStatsTxL2Csnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 CSNPs(Complete sequence no. packet) transmitted." ::= { wfIisisIfStatsEntry 16 } wfIisisIfStatsTxL1Psnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 PSNPs(Partial sequence no. packet) transmitted." ::= { wfIisisIfStatsEntry 17 } wfIisisIfStatsTxL2Psnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 PSNPs(Partial sequence no. packet) transmitted." ::= { wfIisisIfStatsEntry 18 } wfIisisIfStatsRxL1Lsp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 LSPs(Link State Packet) received." ::= { wfIisisIfStatsEntry 19 } wfIisisIfStatsRxL2Lsp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 LSPs(Link State Packet) received." ::= { wfIisisIfStatsEntry 20 } wfIisisIfStatsRxL1Csnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 CSNPs(Complete sequence no. packet) received." ::= { wfIisisIfStatsEntry 21 } wfIisisIfStatsRxL2Csnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 CSNPs(Complete sequence no. packet) received." ::= { wfIisisIfStatsEntry 22 } wfIisisIfStatsRxL1Psnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 PSNPs(Partial sequence no. packet) received." ::= { wfIisisIfStatsEntry 23 } wfIisisIfStatsRxL2Psnp OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 PSNPs(Partial sequence no. packet) received." ::= { wfIisisIfStatsEntry 24 } wfIisisIfStatsL1NbrCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of neighbors with any state." ::= { wfIisisIfStatsEntry 25 } wfIisisIfStatsL2NbrCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of neighbors with any state." ::= { wfIisisIfStatsEntry 26 } wfIisisIfStatsL1AdjCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of neighbors with state UP." ::= { wfIisisIfStatsEntry 27 } wfIisisIfStatsL2AdjCount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Count of neighbors with state UP." ::= { wfIisisIfStatsEntry 28 } wfIisisDynNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIisisDynNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "-- I-ISIS Dynamic Neighbor Table The I-ISIS Dynamic Neighbor Table describes all neighbors in the locality of the subject router learned during operation." ::= { wfIisisGroup 7 } wfIisisDynNbrEntry OBJECT-TYPE SYNTAX WfIisisDynNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "'The information regarding a single neighbor.' REFERENCE 'I-ISIS Version 2, Section 10 The Neighbor Data Structure'" INDEX { wfIisisDynNbrIpAddr, wfIisisDynNbrAddressLessIndex } ::= { wfIisisDynNbrTable 1 } WfIisisDynNbrEntry ::= SEQUENCE { wfIisisDynNbrState INTEGER, wfIisisDynNbrIpAddr IpAddress, wfIisisDynNbrIfAddr IpAddress, wfIisisDynNbrAddressLessIndex INTEGER, wfIisisDynNbrRtrId OCTET STRING, wfIisisDynNbrDatabase INTEGER, wfIisisDynNbrType INTEGER, wfIisisDynNbrPseudonodeId INTEGER, wfIisisDynNbrHoldTime INTEGER, wfIisisDynNbrPriority INTEGER, wfIisisDynNbrSnpaAddr OCTET STRING, wfIisisDynNbrLanId OCTET STRING } wfIisisDynNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), init(2), up(3) } ACCESS read-only STATUS mandatory DESCRIPTION "'The State of the relationship with this Neighbor.'" DEFVAL { down } ::= { wfIisisDynNbrEntry 1 } wfIisisDynNbrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "'The IP address of this neighbor.'" ::= { wfIisisDynNbrEntry 2 } wfIisisDynNbrIfAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "'Our Interface IP address for this neighbor.'" ::= { wfIisisDynNbrEntry 3 } wfIisisDynNbrAddressLessIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "'The circuit over which this neighbor is learnt.'" ::= { wfIisisDynNbrEntry 4 } wfIisisDynNbrRtrId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "'A 6 byte field representing the Intermediate system Id.'" ::= { wfIisisDynNbrEntry 5 } wfIisisDynNbrDatabase OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Database into which the Adjacency is stored, 1=ES, 2=Level 1 IS, 3=Level 2 IS." DEFVAL {3} ::= { wfIisisDynNbrEntry 6 } wfIisisDynNbrType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), pointtopoint(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of adjacency." DEFVAL {broadcast} ::= { wfIisisDynNbrEntry 7 } wfIisisDynNbrPseudonodeId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each known circuit." ::= { wfIisisDynNbrEntry 8 } wfIisisDynNbrHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hold Time received from neighbor." ::= { wfIisisDynNbrEntry 9 } wfIisisDynNbrPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority to become designated router. IS only." ::= { wfIisisDynNbrEntry 10 } wfIisisDynNbrSnpaAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "SNPA address for neighbor." ::= { wfIisisDynNbrEntry 11 } wfIisisDynNbrLanId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "LAN ID of Designated IS of this interface." ::= { wfIisisDynNbrEntry 12 } END -- BayNetworks-IISIS-MIB