WF-HTTP-MIB device MIB details by Wellfleet
WF-HTTP-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing WF-HTTP-MIB.
Vendor: | Wellfleet |
---|---|
Mib: | WF-HTTP-MIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
WF-HTTP-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfHttpGroup FROM Wellfleet-COMMON-MIB; wfHttp OBJECT IDENTIFIER ::= { wfHttpGroup 1 } -- There are four groups of objects: -- wfHttpSrv (wfHttp.1) is a list of configuration values -- wfHttpSummaryEntry (wfHttp.2.1) is a list of summary counters -- wfHttpRequestEntry (wfHttp.2.2) is a table of counters for each request type -- wfHttpResponseEntry (wfHttp.2.3) is a table of counters for each response type wfHttpSrv OBJECT IDENTIFIER ::= { wfHttp 1 } wfHttpSrvDelete OBJECT-TYPE SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set to delete this server instance." DEFVAL { create } ::= { wfHttpSrv 1 } wfHttpSrvDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to enable/disable the server." DEFVAL { enabled } ::= { wfHttpSrv 2 } wfHttpSrvState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Current state of the server entity." DEFVAL { notpresent } ::= { wfHttpSrv 3 } wfHttpSrvPort OBJECT-TYPE SYNTAX INTEGER (0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "The port number this server listens to requests on." DEFVAL { 80 } ::= { wfHttpSrv 4 } wfHttpSrvMaxCacheCount OBJECT-TYPE SYNTAX INTEGER (3..10) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of archives that will be cached in system RAM. Increasing this value will improve performance for multiple simultaneous request at the cost of memory utilization." DEFVAL { 3 } ::= { wfHttpSrv 5 } wfHttpSrvMaxCacheAge OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "The maximumtime in seconds that an archive will be cached in system RAM." DEFVAL { 3 } ::= { wfHttpSrv 6 } wfHttpSrvAuthType OBJECT-TYPE SYNTAX INTEGER { basic(1), digest(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type to use when authorizating requests" DEFVAL { basic } ::= { wfHttpSrv 7 } wfHttpSrvHostName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The fully qualified domain name used for the HTTP server. If the name is set it domain name service must also by provided to allow clients to resolve the name. If this parameter is not configured the IP address of one of the router's interface will be used as the host name." ::= { wfHttpSrv 8 } wfHttpSrvHelpBaseUrl OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A url that is used in all BASE tags that reside in help pages. This base url combined with a relative url points to more detailed information too large for storage on the router." DEFVAL { "http://support.baynetworks.com/library/tpubs/"} ::= { wfHttpSrv 9 } wfHttpStatistics OBJECT IDENTIFIER ::= { wfHttp 2 } wfHttpSummary OBJECT IDENTIFIER ::= { wfHttpStatistics 1 } wfHttpSummaryRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of requests generated or received by this entity." ::= { wfHttpSummary 1 } wfHttpSummaryRequestErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of request errors detected by this entity (as server)." ::= { wfHttpSummary 2 } wfHttpSummaryRequestDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of requests discarded by this entity (as server)." ::= { wfHttpSummary 3 } wfHttpSummaryResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of responses generated or received by this entity." ::= { wfHttpSummary 4 } wfHttpSummaryResponseErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of response errors detected by this entity (as client)." ::= { wfHttpSummary 5 } wfHttpSummaryResponseDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of responses discarded by this entity (as client)." ::= { wfHttpSummary 6 } wfHttpSummaryInUnknowns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of unknown messages received by this entity." ::= { wfHttpSummary 7 } wfHttpSummaryInBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of bytes received by this entity." ::= { wfHttpSummary 8 } wfHttpSummaryOutBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of bytes transmitted by this entity." ::= { wfHttpSummary 9 } wfHttpSummaryTimeOuts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeouts for this entity." ::= { wfHttpSummary 10 } wfHttpSummaryStartTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the server started." ::= { wfHttpSummary 11 } wfHttpRequestTable OBJECT-TYPE SYNTAX SEQUENCE OF WfHttpRequestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table providing detailed request statistics broken out by request type." ::= { wfHttpStatistics 2 } wfHttpRequestEntry OBJECT-TYPE SYNTAX WfHttpRequestEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the request table." INDEX { wfHttpRequestMethodIndex } ::= { wfHttpRequestTable 1 } WfHttpRequestEntry ::= SEQUENCE { wfHttpRequestMethodIndex INTEGER, wfHttpRequestInCount Counter, wfHttpRequestInLastTime TimeTicks, wfHttpRequestOutCount Counter, wfHttpRequestOutLastTime TimeTicks } -- The codes for the method enumeration are not contiguous because they are -- copied from the Internet draft, with some omissions. wfHttpRequestMethodIndex OBJECT-TYPE SYNTAX INTEGER { get(1), head(2), trace(3), post(4), options(5), put(6), delete(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The request method that these statistics apply to." ::= { wfHttpRequestEntry 1 } wfHttpRequestInCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of requests of this type received by the entity." ::= { wfHttpRequestEntry 2 } wfHttpRequestInLastTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the last request was received." ::= { wfHttpRequestEntry 3 } wfHttpRequestOutCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of requests of this type generated by this entity." ::= { wfHttpRequestEntry 4 } wfHttpRequestOutLastTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the last request was generated." ::= { wfHttpRequestEntry 5 } wfHttpResponseTable OBJECT-TYPE SYNTAX SEQUENCE OF WfHttpResponseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Response table, providing break-out of responses by response type." ::= { wfHttpStatistics 3 } wfHttpResponseEntry OBJECT-TYPE SYNTAX WfHttpResponseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the response table." INDEX { wfHttpResponseStatusIndex } ::= { wfHttpResponseTable 1 } WfHttpResponseEntry ::= SEQUENCE { wfHttpResponseStatusIndex INTEGER, wfHttpResponseInCount Counter, wfHttpResponseInLastTime TimeTicks, wfHttpResponseOutCount Counter, wfHttpResponseOutLastTime TimeTicks } wfHttpResponseStatusIndex OBJECT-TYPE SYNTAX INTEGER { ok(200), created(201), accepted(202), no-content(204), moved-permanently(301), moved-temporarily(302), not-modified(304), bad-request(400), unauthorized(401), forbidden(403), not-found(404), internal-server-error(500), not-implemented(501), bad-gateway(502), service-unavailable(503) } ACCESS read-only STATUS mandatory DESCRIPTION "The response code for this row of the table." ::= { wfHttpResponseEntry 1 } wfHttpResponseInCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this response was received." ::= { wfHttpResponseEntry 2 } wfHttpResponseInLastTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this response was last received." ::= { wfHttpResponseEntry 3 } wfHttpResponseOutCount OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this response was generated." ::= { wfHttpResponseEntry 4 } wfHttpResponseOutLastTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime when this response was last sent." ::= { wfHttpResponseEntry 5 } END