Wellfleet-DOT1QTAG-CONFIG-MIB.mib object view, vendor Wellfleet
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-DOT1QTAG-CONFIG-MIB and use it to monitor vendor specific OID's.
Wellfleet-DOT1QTAG-CONFIG-MIB file content
Object view of Wellfleet-DOT1QTAG-CONFIG-MIB:
| Scalar Object |
| wfDot1qTagConfigEntry |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1 |
|
A list of information maintained for each circuit.
|
| Tabular Object |
| wfDot1qTagCfgPhysicalPortId |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.7 |
|
The physical port id which is same as the line number.
|
| wfDot1qTagCfgLocalVlanId |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.4 |
|
The index of the circuit on which Dot1qTag related
attributes are set. Uniquely identifies the group
within a Box. Here it is same as the Circuit Number.
|
| wfDot1qTagCfgDelete |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.1 |
|
Creation and deletion flag for this record. When set to 2
it will cause this entry to be deleted from the MIB
|
| wfDot1qTagCfgDisable |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.2 |
|
Enable/Disable parameter. A disabled interface will
never be selected as the active interface for a circuit.
|
| wfDot1qTagCfgVlanName |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.3 |
|
The name for the VLAN circuit.
NOTE: For SM purposes only. This a dummy cfg. parameter.
|
| wfDot1qTagCfgGlobalVlanId |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.5 |
|
Uniquely identifies the group within the enterprise.
Global VLAN ID is a 12 bit unique number.
|
| wfDot1qTagCfgVirtualPortType |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.6 |
|
The Virtual Port Type.
|
| wfDot1qTagCfgProtocolType |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1.1.8 |
|
The IEEE802.1q protocol type value.
NOTE: With the initial release of the software, the
Tag Protocol Identifier (TPID) field in 802.1 tag will
contain Bay Networks' propietary value of 8100 (Hex).
This value will be specified by the IEEE in the
forthcoming revisions of the 802.1Q standard, Bay
Networks will support the standard value.
|
| Table |
| wfDot1qTagConfigTable |
.1.3.6.1.4.1.18.3.5.1.12.6.1.1 |
|
A table that contains the global read-write
802.1q VLAN tagging attributes on a per circuit
basis. Here circuit number is the Local VLAN Id.
|
| Object Identifier |
| wfDot1qTagConfig |
.1.3.6.1.4.1.18.3.5.1.12.6.1 |
