AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | IoT | IT Service | Network/System | Infra | Performance | Protocol | SaaS | Security | Service Level | Storage | Linux | VMware | VoIP | Web | Wireless | SNMP

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Wellfleet » Wellfleet-FNTS-ATM-MIB » Objects

Wellfleet-FNTS-ATM-MIB.mib object view, vendor Wellfleet

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-FNTS-ATM-MIB and use it to monitor vendor specific OID's.

Wellfleet-FNTS-ATM-MIB file content

Object view of Wellfleet-FNTS-ATM-MIB:

Scalar Object
wfFntsAtmEntry .1.3.6.1.4.1.18.3.4.32.1.1
An entry in the FntsAtm table
Tabular Object
wfFntsAtmSlot .1.3.6.1.4.1.18.3.4.32.1.1.4
instance ID Slot, filled in by driver
wfFntsAtmConnector .1.3.6.1.4.1.18.3.4.32.1.1.5
instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 42 and 'connector' is defined in attribute 43 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfFntsAtmDelete .1.3.6.1.4.1.18.3.4.32.1.1.1
create/delete parameter, dflt = created
wfFntsAtmDisable .1.3.6.1.4.1.18.3.4.32.1.1.2
enable/disable parameter, dflt = enabled
wfFntsAtmState .1.3.6.1.4.1.18.3.4.32.1.1.3
line driver state variable, Not Present, Init, Down, Up
wfFntsAtmCct .1.3.6.1.4.1.18.3.4.32.1.1.6
cct number for this line instance
wfFntsAtmMtu .1.3.6.1.4.1.18.3.4.32.1.1.7
mtu parameter, fixed
wfFntsAtmMadr .1.3.6.1.4.1.18.3.4.32.1.1.8
line MAC address, fixed - line driver fills in
wfFntsAtmIpAdr .1.3.6.1.4.1.18.3.4.32.1.1.9
Ip Address, for the Sonet RPU
wfFntsAtmAtmState .1.3.6.1.4.1.18.3.4.32.1.1.10
line driver state variable, Not Present, Init, Down, Up
wfFntsAtmSpeed .1.3.6.1.4.1.18.3.4.32.1.1.11
Atm Interface speed in Meg bps.
wfFntsAtmRxOctets .1.3.6.1.4.1.18.3.4.32.1.1.12
counts the number of bytes received from the Atm interface.
wfFntsAtmRxFrames .1.3.6.1.4.1.18.3.4.32.1.1.13
counts the number of frames received from the Atm interface.
wfFntsAtmTxOctets .1.3.6.1.4.1.18.3.4.32.1.1.14
counts the number of bytes sent to the Atm interface.
wfFntsAtmTxFrames .1.3.6.1.4.1.18.3.4.32.1.1.15
counts the number of frames sent to the Atm interface.
wfFntsAtmLackRescErrorRx .1.3.6.1.4.1.18.3.4.32.1.1.16
counts the number of requested buffers not available to the driver.
wfFntsAtmInErrors .1.3.6.1.4.1.18.3.4.32.1.1.17
counts the number of errors on the receive side of the driver.
wfFntsAtmOutErrors .1.3.6.1.4.1.18.3.4.32.1.1.18
counts the number of errors on the transmit side of the driver.
wfFntsAtmRxLongFrames .1.3.6.1.4.1.18.3.4.32.1.1.19
counts the number of received frames too long.
wfFntsAtmTxClipFrames .1.3.6.1.4.1.18.3.4.32.1.1.20
counts the number of transmit frames dropped because of no transmit queue space.
wfFntsAtmRxReplenMisses .1.3.6.1.4.1.18.3.4.32.1.1.21
counts the number of the buffer requests without response.
wfFntsAtmRxOverruns .1.3.6.1.4.1.18.3.4.32.1.1.22
counts the number of receiver overruns.
wfFntsAtmRxRingErrors .1.3.6.1.4.1.18.3.4.32.1.1.23
counts the number of receiver ring errors.
wfFntsAtmTxRingErrors .1.3.6.1.4.1.18.3.4.32.1.1.24
counts the number of transmit ring errors.
wfFntsAtmOpErrors .1.3.6.1.4.1.18.3.4.32.1.1.25
counts the number of operational driver errors.
wfFntsAtmRxProcessings .1.3.6.1.4.1.18.3.4.32.1.1.26
counts the number of times the receive processing has been called.
wfFntsAtmTxProcessings .1.3.6.1.4.1.18.3.4.32.1.1.27
counts the number of times the transmit processing has been called.
wfFntsAtmTxCmplProcessings .1.3.6.1.4.1.18.3.4.32.1.1.28
counts the number of times the transmit complete processing has been called.
wfFntsAtmIntrProcessings .1.3.6.1.4.1.18.3.4.32.1.1.29
counts the number of times the interrupt service routine has been called
wfFntsAtmSintProcessings .1.3.6.1.4.1.18.3.4.32.1.1.30
counts the number of times the change state interrupt has been called.
wfFntsAtmPintProcessings .1.3.6.1.4.1.18.3.4.32.1.1.31
counts the number of times the primitive interrupt service routine has been called.
wfFntsAtmRxRingLength .1.3.6.1.4.1.18.3.4.32.1.1.32
Atm Interface Receiver Ring Length.
wfFntsAtmTxRingLength .1.3.6.1.4.1.18.3.4.32.1.1.33
Atm Interface Transmit Ring Length.
wfFntsAtmCfgRxQueueLength .1.3.6.1.4.1.18.3.4.32.1.1.34
Atm Configurable receive queue length.
wfFntsAtmCfgTxQueueLength .1.3.6.1.4.1.18.3.4.32.1.1.35
Atm Configurable transmit queue length.
wfFntsAtmLineNumber .1.3.6.1.4.1.18.3.4.32.1.1.36
Unique number identifying this interface.
Table
wfFntsAtmTable .1.3.6.1.4.1.18.3.4.32.1
Fnts Atm line record