Wellfleet-GRE-MIB.mib object view, vendor Wellfleet
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-GRE-MIB and use it to monitor vendor specific OID's.
Wellfleet-GRE-MIB file content
Object view of Wellfleet-GRE-MIB:
| Scalar Object |
| wfGreInterfaceEntry |
.1.3.6.1.4.1.18.3.5.3.20.1.1 |
|
An entry in wfGreTable.
|
| wfGreTunnelEntry |
.1.3.6.1.4.1.18.3.5.3.20.2.1 |
|
An entry in wfGreTunnelTable.
|
| Tabular Object |
| wfGreIntfIpAddr |
.1.3.6.1.4.1.18.3.5.3.20.1.1.4 |
|
The IP interface to run GRE on.
|
| wfGreIntfCct |
.1.3.6.1.4.1.18.3.5.3.20.1.1.5 |
|
Circuit number of the GRE interface
|
| wfGreIntfCreate |
.1.3.6.1.4.1.18.3.5.3.20.1.1.1 |
|
Create/Delete parameter. Default is created.
Users perform a set operation on this object in order to
create/delete an wfGreEntry instance.
|
| wfGreIntfEnable |
.1.3.6.1.4.1.18.3.5.3.20.1.1.2 |
|
Enable/Disable parameter. Default is enabled.
Users perform a set operation on this object in order to
enable/disable GRE .
|
| wfGreIntfState |
.1.3.6.1.4.1.18.3.5.3.20.1.1.3 |
|
The current state of GRE interface.
|
| wfGreIntfStatsEnable |
.1.3.6.1.4.1.18.3.5.3.20.1.1.6 |
|
Enable/Disable parameter. Default is enabled.
Users perform a set operation on this object in order to
enable/disable mib statistics for GRE
interface.
|
| wfGreIntfDebugLevel |
.1.3.6.1.4.1.18.3.5.3.20.1.1.7 |
|
A parameter to specify which messages to be printed
in to the log.
|
| wfGreTunnelLocalAddr |
.1.3.6.1.4.1.18.3.5.3.20.2.1.1 |
|
IP Address of local interface.
|
| wfGreTunnelPeerAddress |
.1.3.6.1.4.1.18.3.5.3.20.2.1.5 |
|
Address of the tunnel peer.
|
| wfGreTunnelLocalIndex |
.1.3.6.1.4.1.18.3.5.3.20.2.1.2 |
|
This tunnel index is assigned by the GRE process.
It is used to index into the GRE mapping table.
|
| wfGreTunnelType |
.1.3.6.1.4.1.18.3.5.3.20.2.1.3 |
|
Indicate whether a tunnel peer has assigned a tunnel ID.
|
| wfGreTunnelId |
.1.3.6.1.4.1.18.3.5.3.20.2.1.4 |
|
This tunnel ID is assigned by the tunnel peer.
|
| wfGreRemotePayloadAddress |
.1.3.6.1.4.1.18.3.5.3.20.2.1.6 |
|
The address of the remote node.
|
| wfGreTunnelState |
.1.3.6.1.4.1.18.3.5.3.20.2.1.7 |
|
The state of the GRE tunnel.
|
| wfGreVersion |
.1.3.6.1.4.1.18.3.5.3.20.2.1.8 |
|
Reserved for future use
|
| wfGreProtoMap |
.1.3.6.1.4.1.18.3.5.3.20.2.1.9 |
|
This will be set to the protocol type of the payload.
GRE_PROTO_IP 1
GRE_PROTO_IPX 2
|
| wfGreTunnelPktsTx |
.1.3.6.1.4.1.18.3.5.3.20.2.1.10 |
|
Number of packets transmitted
|
| wfGreTunnelPktsRx |
.1.3.6.1.4.1.18.3.5.3.20.2.1.11 |
|
Number of packets received
|
| wfGreTunnelBytesTx |
.1.3.6.1.4.1.18.3.5.3.20.2.1.12 |
|
Number of bytes transmitted
|
| wfGreTunnelBytesRx |
.1.3.6.1.4.1.18.3.5.3.20.2.1.13 |
|
Number of bytes received
|
| wfGreTunnelPktsTxDropped |
.1.3.6.1.4.1.18.3.5.3.20.2.1.14 |
|
Number of outgoing packets dropped
|
| wfGreTunnelPktsRxDropped |
.1.3.6.1.4.1.18.3.5.3.20.2.1.15 |
|
Number of incoming packets dropped
|
| wfGreTunnelXsumErr |
.1.3.6.1.4.1.18.3.5.3.20.2.1.16 |
|
Number of inbound checksum errors
|
| wfGreTunnelSeqNumErr |
.1.3.6.1.4.1.18.3.5.3.20.2.1.17 |
|
Number of sequence errors
|
| wfGreTunnelMtu |
.1.3.6.1.4.1.18.3.5.3.20.2.1.18 |
|
The MTU of the GRE tunnel
|
| Table |
| wfGreInterfaceTable |
.1.3.6.1.4.1.18.3.5.3.20.1 |
|
Parameters in wfGreInterfaceTable
|
| wfGreTunnelTable |
.1.3.6.1.4.1.18.3.5.3.20.2 |
|
Parameters in wfGreTunnelTable
|
