Wellfleet-IPEX-MIB device MIB details by Wellfleet
Wellfleet-IPEX-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Wellfleet-IPEX-MIB.
| Vendor: | Wellfleet |
|---|---|
| Mib: | Wellfleet-IPEX-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Wellfleet-IPEX-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:43:20 EDT 1995 IMPORTS IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfIpexGroup FROM Wellfleet-COMMON-MIB; wfIpex OBJECT IDENTIFIER ::= { wfIpexGroup 1 } wfIpexDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete IPEX." DEFVAL { created } ::= { wfIpex 1 } wfIpexDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable IPEX." DEFVAL { enabled } ::= { wfIpex 2 } wfIpexState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of IPEX." DEFVAL { down } ::= { wfIpex 3 } wfIpexMaxMessageSize OBJECT-TYPE SYNTAX INTEGER (16..4096) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum client message size that IPEX accepts. The size is in bytes." DEFVAL { 1600 } ::= { wfIpex 4 } wfIpexInsCalledDte OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter. Default is disabled. Users perform an SNMP SET operation on this object in order to enable/disable the support for inserting Called DTE address." DEFVAL { disabled } ::= { wfIpex 5 } wfIpexInsCallingDte OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable the support for transmitting the calling DTE address over TCP tunnel. This changes the IPEX control message header format and hence this attribute should be enabled (only for 11.02 or up) on both ends (local & remote routers) for proper operation. This attribute applies only to End_to_End mode." DEFVAL { disabled } ::= { wfIpex 6 } wfIpexTcpRequestLimit OBJECT-TYPE SYNTAX INTEGER(0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of TCP requests IPEX can have pending with TCP. Any addition requests will be queued until the number of pending requests fall below the limit." DEFVAL { 25 } ::= { wfIpex 7 } wfIpexTcpRequestCheck OBJECT-TYPE SYNTAX INTEGER(0..30000) ACCESS read-write STATUS mandatory DESCRIPTION "When IPEX has queued TCP requests, the time period (in milliseconds) between checking if the number of pending TCP requests have fallen below wfIpexTcpRequestLimit." DEFVAL { 1000 } ::= { wfIpex 8 } wfIpexSendResetRequestOnTCPUp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Default(cause code) is 0x09 and PVC_TCP sends out the Reset Request with the cause code = 0x09 and TCP_PVC Router does not send the Reset Request when TCP is up. If the value is changed from the default cause code(0x09) then IPEX Gateway will send out the Reset Request with this value when network is operational. TCP_PVC will also send the Reset Request with this cause code when TCP connection is up." DEFVAL { 9 } ::= { wfIpex 9 } wfIpexTranslateNetworkOutOfOrder OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Default is 0x1d(29): Network out of order. If the value is changed from the default cause code = 0x1d then the IPEX Gateway will send the Reset Request with cause code specified when the network is out of order." DEFVAL { 29 } ::= { wfIpex 10 } wfIpexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpexMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table which contains the list of mappings between TCP connections and X.25 connections. This is the configuration table in which each entry sets up the association between a TCP port number and a X.25 DTE address or connection. inst_id[] = wfIpexMappingSrcConnCct wfIpexMappingSrcConnType wfIpexMappingID" ::= { wfIpexGroup 2 } wfIpexMappingEntry OBJECT-TYPE SYNTAX WfIpexMappingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfIpexMappingTable." INDEX { wfIpexMappingSrcConnCct, wfIpexMappingSrcConnType, wfIpexMappingID1, wfIpexMappingID2 } ::= { wfIpexMappingTable 1 } WfIpexMappingEntry ::= SEQUENCE { wfIpexMappingDelete INTEGER, wfIpexMappingDisable INTEGER, wfIpexMappingSrcConnCct INTEGER, wfIpexMappingSrcConnType INTEGER, wfIpexMappingID1 INTEGER, wfIpexMappingID2 OCTET STRING, wfIpexMappingDstConnCct INTEGER, wfIpexMappingDstConnType INTEGER, wfIpexMappingLocalDTEAddr DisplayString, wfIpexMappingRemoteDTEAddr DisplayString, wfIpexMappingPvcLcn INTEGER, wfIpexMappingRemoteIpAddr IpAddress, wfIpexMappingRemoteTcpPort INTEGER, wfIpexMappingQueueSize INTEGER, wfIpexMappingSlotNumber INTEGER, wfIpexMappingCtrlMode INTEGER, wfIpexMappingX25CUDF OCTET STRING, wfIpexMappingIdleTimer INTEGER, wfIpexMappingKeepaliveTimer INTEGER, wfIpexMappingKeepaliveRetries INTEGER, wfIpexMappingTrace INTEGER, wfIpexMappingMsgHdrType INTEGER, wfIpexMappingRemoteBackupIp IpAddress, wfIpexMappingXlateCallingX121 DisplayString, wfIpexMappingTcpMaxRetry INTEGER } wfIpexMappingDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete attribute. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a translation mapping record." DEFVAL { created } ::= { wfIpexMappingEntry 1 } wfIpexMappingDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables this Mapping entry. Setting this attribute to DISABLED will disconnect all active Sessions pertaining to this Mapping entry" DEFVAL { enabled } ::= { wfIpexMappingEntry 2 } wfIpexMappingSrcConnCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The circuit from which the connection attempt is received that initiates a translation session." ::= { wfIpexMappingEntry 3 } wfIpexMappingSrcConnType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), dcesvc(4), lapb(8), tcp(16) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the type of original connection attempt. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP" ::= { wfIpexMappingEntry 4 } wfIpexMappingID1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The translation mapping identifier which identifies the remote connection of the translation session. This is an identifier that is available from the incoming connection attempt. The meaning of this object (wfIpexMappingID1) and the next object (wfIpexMappingID2) is dependent on the value of wfIpexMappingSrcConnType. SrcConnType ID1 ID2 --------------------------------------------------- pvc(1) LCN value 0 (Null) svc(2) 0 Called X.121 Address dcesvc(4) 0 0 (Null) lapb(8) 0 0 (Null) tcp(16) Port Number 0 (Null) " ::= { wfIpexMappingEntry 5 } wfIpexMappingID2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "(See description for wfIpexMappingID1 above)" ::= { wfIpexMappingEntry 6 } wfIpexMappingDstConnCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The circuit from which the connection to the destination is to be established to set up a translation session." ::= { wfIpexMappingEntry 7 } wfIpexMappingDstConnType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), dcesvc(4), lapb(8), tcp(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines type of connection at the destination end. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP" DEFVAL { pvc } ::= { wfIpexMappingEntry 8 } wfIpexMappingLocalDTEAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The Local DTE address (identifies the X.121 address of the X.25 interface on the IPEX). This attribute is only used in the case of a SVC connection initiated from the IPEX to the terminal" ::= { wfIpexMappingEntry 9 } wfIpexMappingRemoteDTEAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The Remote DTE address (identifies the X.121 address of the X.25 interface on the terminal). This attribute is only used in the case of a SVC connection initiated from the IPEX to the terminal" ::= { wfIpexMappingEntry 10 } wfIpexMappingPvcLcn OBJECT-TYPE SYNTAX INTEGER(1..4095) ACCESS read-write STATUS mandatory DESCRIPTION "The LCN of the PVC connection from the IPEX to the terminal (identifies the channel to be used to reset the PVC connection. This attribute * is only used in the case of a PVC connection initiated from the IPEX to the terminal" DEFVAL { 1 } ::= { wfIpexMappingEntry 11 } wfIpexMappingRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection initiated from the IPEX to a host" ::= { wfIpexMappingEntry 12 } wfIpexMappingRemoteTcpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The remote TCP port number in the host to be used to establish a TCP connection from the IPEX to the host server. This attribute is only used in the case of a TCP connection initiated from the IPEX to a host" ::= { wfIpexMappingEntry 13 } wfIpexMappingQueueSize OBJECT-TYPE SYNTAX INTEGER(16..8192) ACCESS read-write STATUS mandatory DESCRIPTION "The size of the IPEX queues used for transfering data between TCP and X.25. The size is in bytes." DEFVAL { 8192 } ::= { wfIpexMappingEntry 14 } wfIpexMappingSlotNumber OBJECT-TYPE SYNTAX INTEGER(1..13) ACCESS read-write STATUS mandatory DESCRIPTION "The slot of the access (X.25 or LAPB) circuit on which the X.25 or LAPB connections will be established." ::= { wfIpexMappingEntry 15 } wfIpexMappingCtrlMode OBJECT-TYPE SYNTAX INTEGER { local(1), end2end(2), gateway(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Local mode configuration terminates X.25 at the router interface. The end2end mode configuration allows X.25 signalling and data to operate between two remote X.25 networks, using the router to translate both call control and data over a TCP/IP network. The gateway mode terminates X.25 at the router interface, but allows the user to configure 3 message header types at the TCP application layer. These header values are described in wfIpexMappingMsgHdrType." DEFVAL { end2end } ::= { wfIpexMappingEntry 16 } wfIpexMappingX25CUDF OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The X.25 Call User Data field (CUDF) in a X.25 Call Request packet header. This attribute is only used in the case of a SVC connection initiated from the IPEX to the terminal. It is used as the network layer protocol identifier of the X.25 connection." ::= { wfIpexMappingEntry 17 } wfIpexMappingIdleTimer OBJECT-TYPE SYNTAX INTEGER(0..86400) ACCESS read-write STATUS mandatory DESCRIPTION "Idle session timeout period, in seconds. If an established TCP connection remains inactive for this interval, KEEPALIVE messages will be sent to the peer (if the Keepalive Timer is non-zero). Setting the Idle Timer to zero disables the keepalive feature." DEFVAL { 120 } ::= { wfIpexMappingEntry 18 } wfIpexMappingKeepaliveTimer OBJECT-TYPE SYNTAX INTEGER(0..600) ACCESS read-write STATUS mandatory DESCRIPTION "KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retransmitted. If the Idle Timer is set to zero, this timer ignored. If the Idle Timer is non-zero and this timer IS zero, no KEEPALIVEs are sent and the session is terminated upon expiration of the Idle Timer." DEFVAL { 3 } ::= { wfIpexMappingEntry 19 } wfIpexMappingKeepaliveRetries OBJECT-TYPE SYNTAX INTEGER(0..99) ACCESS read-write STATUS mandatory DESCRIPTION "Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, only one KEEPALIVE message will be sent." DEFVAL { 5 } ::= { wfIpexMappingEntry 20 } wfIpexMappingTrace OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object is a bitmask, setting the low order bit enables tracing of IPEX internal events. Setting other individual bit postions disable logging of internal IPEX events. Values may be added together to disable multiple message groups. Hex Dec Value Value Message/Event --------------------------------------------------------- 0x0001 1 Enable IPEX tracing. 0x0002 2 Data packets from IPEX to X.25. 0x0004 4 Data packets from X.25 to IPEX. 0x0008 8 Window updates from X.25. 0x0010 16 Data from TCP to IPEX. 0x0020 32 Window updates from TCP. 0x0040 64 Window requests from TCP." DEFVAL { 0 } ::= { wfIpexMappingEntry 21 } wfIpexMappingMsgHdrType OBJECT-TYPE SYNTAX INTEGER { none(1), short(2), long(3), full(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute enables the Message Boundary Protocol. When enabled, this bit is used to mark the boundary of TCP application data that is consistent with Gateway Operation. The first three message header types are used only with wfIpexMappingCtlMode in gateway mode. The default value is used with wfIpexMappingCtlMode in the local or end2end mode of operation. NONE = Msg Boundary Protocol is off, no msg header. SHORT = Msg header condtains a 2-Byte length field. LONG = Msg header contains a 1-Byte type, 1-Byte version, and a 2-Byte length fields. FULL = Msg Header contains a 2-Byte length1 field, 1-Byte Version field, 1-Byte Type field and, a 1-Byte length2 field" DEFVAL { full } ::= { wfIpexMappingEntry 22 } wfIpexMappingRemoteBackupIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection with the primary remote IP address (wfIpexMappingRemoteIpAddr) failed." ::= { wfIpexMappingEntry 23 } wfIpexMappingXlateCallingX121 OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is configured then insert this X.121 addr as the calling addr in the Call request pkt." ::= { wfIpexMappingEntry 24 } wfIpexMappingTcpMaxRetry OBJECT-TYPE SYNTAX INTEGER(0..16384) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number that PVC-TCP will make attemps to re-establish the connection to the remote peer. The TCP Retry takes place every 15 seconds hence defalut setting will perform the TCP Retry forever." DEFVAL { 0 } ::= { wfIpexMappingEntry 25 } wfIpexSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF WfIpexSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains the information about the current active IPEX translation sessions. The status and statistics information related to each translation session is provided here. inst_id[] = wfIpexSessionIndex" ::= { wfIpexGroup 3 } wfIpexSessionEntry OBJECT-TYPE SYNTAX WfIpexSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in wfIpexSession." INDEX { wfIpexSessionSrcConnCct, wfIpexSessionIndex } ::= { wfIpexSessionTable 1 } WfIpexSessionEntry ::= SEQUENCE { wfIpexSessionState INTEGER, wfIpexSessionSrcConnCct INTEGER, wfIpexSessionIndex INTEGER, wfIpexSessionSrcConnType INTEGER, wfIpexSessionDstConnCct INTEGER, wfIpexSessionDstConnType INTEGER, wfIpexSessionLocalDTEAddr DisplayString, wfIpexSessionRemoteDTEAddr DisplayString, wfIpexSessionLCN INTEGER, wfIpexSessionLocalIpAddr IpAddress, wfIpexSessionLocalTcpPort INTEGER, wfIpexSessionRemoteIpAddr IpAddress, wfIpexSessionRemoteTcpPort INTEGER, wfIpexSessionQueueSize INTEGER } wfIpexSessionState OBJECT-TYPE SYNTAX INTEGER { x25up(1), tcpup(2), ccestab(3), notconn(4), lapbup(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The IPEX state of this translation session. These are the steady states of the IPEX state machine. Transition states are not reflected." DEFVAL { notconn } ::= { wfIpexSessionEntry 1 } wfIpexSessionSrcConnCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The circuit from which the original connection attempt is received that initiated a translation session." ::= { wfIpexSessionEntry 2 } wfIpexSessionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this translation session" ::= { wfIpexSessionEntry 3 } wfIpexSessionSrcConnType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), dcesvc(4), lapb(8), tcp(16) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines type of original connection attempt. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP" ::= { wfIpexSessionEntry 4 } wfIpexSessionDstConnCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The circuit from which the connection at the destination to be established to set up a translation session." ::= { wfIpexSessionEntry 5 } wfIpexSessionDstConnType OBJECT-TYPE SYNTAX INTEGER { pvc(1), svc(2), dcesvc(4), lapb(8), tcp(16) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines type of connection at the destination end. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP" DEFVAL { pvc } ::= { wfIpexSessionEntry 6 } wfIpexSessionLocalDTEAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Local DTE address (identifies the X.121 address of the X.25 interface on the IPEX). This attribute is only used in the case of a SVC connection initiated from the IPEX to the terminal" ::= { wfIpexSessionEntry 7 } wfIpexSessionRemoteDTEAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Remote DTE address (identifies the X.121 address of the X.25 interface on the terminal). This attribute is only used in the case of a SVC connection initiated from the IPEX to the terminal" ::= { wfIpexSessionEntry 8 } wfIpexSessionLCN OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-only STATUS mandatory DESCRIPTION "The LCN of the PVC (identifies the channel to be used to establish a PVC connection from the IPEX to the terminal" DEFVAL { 1 } ::= { wfIpexSessionEntry 9 } wfIpexSessionLocalIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of an interface on the IPEX to be used to establish a TCP connection with the host server. This attribute is only used in the case of a TCP connection initiated from the IPEX to a host" ::= { wfIpexSessionEntry 10 } wfIpexSessionLocalTcpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local TCP port number in the IPEX to be used to establish a TCP connection to the host server This attribute is only used in the case of a TCP connection initiated from the IPEX to a host" ::= { wfIpexSessionEntry 11 } wfIpexSessionRemoteIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The IP address of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection initiated from the IPEX to a host" ::= { wfIpexSessionEntry 12 } wfIpexSessionRemoteTcpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The remote TCP port number in the host to be used to establish a TCP connection from the IPEX to the host server. This attribute is only used in the case of a TCP connection initiated from the IPEX to a host" ::= { wfIpexSessionEntry 13 } wfIpexSessionQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the IPEX queues used for transfering data between IPEX and TCP. The size is in bytes." ::= { wfIpexSessionEntry 14 } END -- Wellfleet-IPEX-MIB