| wfIpRipAcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.3 |
|
Rule index number
|
| wfIpRipAcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.1 |
|
Create/Delete parameter.
|
| wfIpRipAcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.2 |
|
Enable/Disable parameter.
|
| wfIpRipAcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpRipAcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpRipAcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpRipAcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpRipAcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpRipAcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpRipAcceptGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.10 |
|
RIP gateway list. This octet string contains the addresses
of one or more routers that could send RIP updates to this
router. If a router address is included in this list,
this filter applies to RIP advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpRipAcceptInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.11 |
|
RIP interface list. This octet string contains the
addresses of one or more interfaces on this router. If an
interface address is included in this list, this filter
applies to RIP advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpRipAcceptApplyMask |
.1.3.6.1.4.1.18.3.5.3.2.6.1.1.12 |
|
Injection Mask: If the 'action' is accept and the
actual received network will be considered, this is an
optional IP address mask that will be applied to the network
number from the RIP update. This is used to override the
interface's subnet mask in the presence of networks with
variable length subnet masks.
|
| wfIpRipAnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.3 |
|
Rule index number
|
| wfIpRipAnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.1 |
|
Create/Delete parameter.
|
| wfIpRipAnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.2 |
|
Enable/Disable parameter.
|
| wfIpRipAnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpRipAnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpRipAnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpRipAnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpRipAnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.8 |
|
route source. This parameter can contain one or more
route source identifiers. If the route source is in this
bit map, then a route from that source that meets the other
criteria of this filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpRipAnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.9 |
|
external route source. This parameter can contain one
or more external route source identifiers. If the external
route source is in this bit map, then a route from that
external source that meets the other criteria of this
filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpRipAnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpRipAnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.11 |
|
from RIP' gateway list. Only applicable for RIP sourced
routes and if RIP is included as a route source. This octet
string contains the addresses of one or more routers that could
send RIP updates to this router. If a router address is
included in this list, this filter applies to RIP
advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpRipAnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.12 |
|
from RIP' interface list. Only applicable for RIP
sourced routes and if RIP is included as a route source.
This octet string contains the addresses of one or more
interfaces on this router. If an interface address is
included in this list, this filter applies to RIP
advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpRipAnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.13 |
|
from OSPF' Router ID list. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This octet
string contains the router IDs of one or more OSPF routers.
If a router ID is included in this list, this filter applies
to OSPF advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to OSPF updates
from any router.
|
| wfIpRipAnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.14 |
|
from OSPF' route type. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This
parameter describes which types of OSPF routes match this
filter. 'any' means match any route type. 'internal'
means 'match any non-ASE'. 'external' means 'match any
ASE'. 'type1' means 'match any external type 1'. 'type2'
means 'match any external type 2
|
| wfIpRipAnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.15 |
|
from OSPF' ASE tag list. Only applicable for OSPF sourced
ASE routes and if OSPF is included as a route source. This
octet string contains tag values that could be present in an
OSPF ASE advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpRipAnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.16 |
|
from EGP' Peer list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP peers.
If an EGP peer is included in this list, this filter applies
to EGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any router.
|
| wfIpRipAnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.17 |
|
from EGP' Peer AS list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to EGP
advertisements received from EBP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP advertisements
from peers in any AS.
|
| wfIpRipAnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.18 |
|
from EGP' Gateway list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP gateways.
If an EGP gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpRipAnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.19 |
|
from BGP' Peer list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains the IP address of one or more BGP peers.
If a BGP peer is included in this list, this filter applies
to BGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any router.
|
| wfIpRipAnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.20 |
|
from BGP' AS list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements received from BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
from peers in any AS.
|
| wfIpRipAnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.21 |
|
from BGP' NextHop list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains IP addresses. If an IP address
is included in this list, this filter applies to BGP
advertisements whose NEXT_HOP attribute matches this
IP address.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any NEXT_HOP attribute.
|
| wfIpRipAnnounceInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.22 |
|
RIP outbound interface list. This is a list of outgoing RIP
interfaces. If an interface appears in this list, the filter
applies to RIP advertisements sent via that interface.
If non-null, The octet string contains one or more 4-octet IP
addresses. If null, this filter applies to any outbound
RIP interface.
|
| wfIpRipAnnounceRipMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.2.1.23 |
|
RIP metric. Only valid if the action is 'propagate'.
This is an optional export metric to use when advertising
a route that matches this filter. If zero, the routing table
metric calculated for RIP plus the interface cost is used.
|
| wfIpOspfAcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.3 |
|
Rule index number
|
| wfIpOspfAcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.1 |
|
Create/Delete parameter.
|
| wfIpOspfAcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.2 |
|
Enable/Disable parameter.
|
| wfIpOspfAcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpOspfAcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpOspfAcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpOspfAcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpOspfAcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpOspfAcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpOspfAcceptType |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.10 |
|
OSPF ASE type. This parameter describes which
types of OSPF ASE routes match this filter.
'any' means 'match either ASE type 1 or 2'.
'type1' means 'match any external type 1'.
'type2' means 'match any external type 2
|
| wfIpOspfAcceptTag |
.1.3.6.1.4.1.18.3.5.3.2.6.3.1.11 |
|
OSPF ASE tag list. This octet string contains tag
values that could be present in an OSPF ASE
advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpOspfAnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.3 |
|
Rule index number
|
| wfIpOspfAnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.1 |
|
Create/Delete parameter.
|
| wfIpOspfAnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.2 |
|
Enable/Disable parameter.
|
| wfIpOspfAnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpOspfAnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpOspfAnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpOspfAnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpOspfAnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.8 |
|
route source. This parameter can contain one or more
route source identifiers. If the route source is in this
bit map, then a route from that source that meets the other
criteria of this filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit27 EGP
bit26 BGP
|
| wfIpOspfAnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.9 |
|
external route source. This parameter can contain one
or more external route source identifiers. If the external
route source is in this bit map, then a route from that
external source that meets the other criteria of this
filter will match the filter. Not valid for OSPF announce rules.
|
| wfIpOspfAnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpOspfAnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.11 |
|
from RIP' gateway list. Only applicable for RIP sourced
routes and if RIP is included as a route source. This octet
string contains the addresses of one or more routers that could
send RIP updates to this router. If a router address is
included in this list, this filter applies to RIP
advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpOspfAnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.12 |
|
from RIP' interface list. Only applicable for RIP
sourced routes and if RIP is included as a route source.
This octet string contains the addresses of one or more
interfaces on this router. If an interface address is
included in this list, this filter applies to RIP
advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpOspfAnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.13 |
|
from OSPF' Router ID list. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This octet
string contains the router IDs of one or more OSPF routers.
If a router ID is included in this list, this filter applies
to OSPF advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to OSPF updates
from any router.
|
| wfIpOspfAnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.14 |
|
from OSPF' route type. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This
parameter describes which types of OSPF routes match this
filter. 'any' means match any route type. 'internal'
means 'match any non-ASE'. 'external' means 'match any
ASE'. 'type1' means 'match any external type 1'. 'type2'
means 'match any external type 2
|
| wfIpOspfAnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.15 |
|
from OSPF' ASE tag list. Only applicable for OSPF sourced
ASE routes and if OSPF is included as a route source. This
octet string contains tag values that could be present in an
OSPF ASE advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpOspfAnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.16 |
|
from EGP' Peer list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP peers.
If an EGP peer is included in this list, this filter applies
to EGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any router.
|
| wfIpOspfAnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.17 |
|
from EGP' Peer AS list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to EGP
advertisements received from EBP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP advertisements
from peers in any AS.
|
| wfIpOspfAnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.18 |
|
from EGP' Gateway list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP gateways.
If an EGP gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpOspfAnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.19 |
|
from BGP' Peer list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains the IP address of one or more BGP peers.
If a BGP peer is included in this list, this filter applies
to BGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any router.
|
| wfIpOspfAnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.20 |
|
from BGP' AS list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements received from BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
from peers in any AS.
|
| wfIpOspfAnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.21 |
|
from BGP' NextHop list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains IP addresses. If an IP address
is included in this list, this filter applies to BGP
advertisements whose NEXT_HOP attribute matches this
IP address.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any NEXT_HOP attribute.
|
| wfIpOspfAnnounceType |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.22 |
|
OSPF ASE type. The ASE type to use for routes that
match this filter. This is only applicable if the
action is 'accept'. A zero value means to use the
default ASE type for the route source.
|
| wfIpOspfAnnounceTag |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.23 |
|
OSPF ASE tag. The ASE tag value to use for routes
that match this filter. This is only applicable if the
action is 'accept' and autotag is set to 'disable'.
|
| wfIpOspfAnnounceAutoTag |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.24 |
|
BGP/OSPF automatic tag generation: Only applicable
if action is 'announce'. if set to 'disabled',
the value in wfIpOspfAnnounceTag will be used for a tag.
If set to 'enabled', a tag will be generated according
to the criteria in RFC 1403 (or any RFC that supercedes
it).
|
| wfIpOspfAnnounceMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.25 |
|
The optional metric to apply to this route.
Zero means : use the route's actual cost. Only
valid for propagate.
|
| wfIpOspfAnnounceNssaPropagate |
.1.3.6.1.4.1.18.3.5.3.2.6.4.1.26 |
|
Indicates whether or not the P-bit will be set in the Type-7
LSA of this route. If P-bit is set, the Type-7 LSA is
translated into a Type-5 LSA and the Type-5 LSA is flooded
into all non-stub areas. Otherwise, the Type-7 LSA is not
translated. This field only applies to the Type-7 LSA
originated by an NSSA internal AS boundary router
|
| wfIpEgpAcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.3 |
|
Rule index number
|
| wfIpEgpAcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.1 |
|
Create/Delete parameter.
|
| wfIpEgpAcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.2 |
|
Enable/Disable parameter.
|
| wfIpEgpAcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpEgpAcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpEgpAcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpEgpAcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpEgpAcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpEgpAcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpEgpAcceptPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.10 |
|
EGP Peer list. This octet string contains the
IP addresses of one or more EGP peers. If a peer
address appears in this list, this filter applies
to EGP advertisements from that peer.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any EGP peer.
|
| wfIpEgpAcceptAs |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.11 |
|
EGP Peer AS list. This octet string contains
Autonomous System numbers. If an AS appears in this
list, this filter applies to EGP advertisements from
peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP
advertisements from peers in any AS.
|
| wfIpEgpAcceptGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.5.1.12 |
|
EGP gateway list. This octet string contains the
IP address of one or more EGP gateways. If an EGP
gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpEgpAnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.3 |
|
Rule index number
|
| wfIpEgpAnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.1 |
|
Create/Delete parameter.
|
| wfIpEgpAnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.2 |
|
Enable/Disable parameter.
|
| wfIpEgpAnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpEgpAnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpEgpAnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpEgpAnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpEgpAnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.8 |
|
route source. This parameter can contain one or more
route source identifiers. If the route source is in this
bit map, then a route from that source that meets the other
criteria of this filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpEgpAnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.9 |
|
external route source. This parameter can contain one
or more external route source identifiers. If the external
route source is in this bit map, then a route from that
external source that meets the other criteria of this
filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpEgpAnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpEgpAnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.11 |
|
from RIP' gateway list. Only applicable for RIP sourced
routes and if RIP is included as a route source. This octet
string contains the addresses of one or more routers that could
send RIP updates to this router. If a router address is
included in this list, this filter applies to RIP
advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpEgpAnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.12 |
|
from RIP' interface list. Only applicable for RIP
sourced routes and if RIP is included as a route source.
This octet string contains the addresses of one or more
interfaces on this router. If an interface address is
included in this list, this filter applies to RIP
advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpEgpAnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.13 |
|
from OSPF' Router ID list. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This octet
string contains the router IDs of one or more OSPF routers.
If a router ID is included in this list, this filter applies
to OSPF advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to OSPF updates
from any router.
|
| wfIpEgpAnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.14 |
|
from OSPF' route type. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This
parameter describes which types of OSPF routes match this
filter. 'any' means match any route type. 'internal'
means 'match any non-ASE'. 'external' means 'match any
ASE'. 'type1' means 'match any external type 1'. 'type2'
means 'match any external type 2
|
| wfIpEgpAnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.15 |
|
from OSPF' ASE tag list. Only applicable for OSPF sourced
ASE routes and if OSPF is included as a route source. This
octet string contains tag values that could be present in an
OSPF ASE advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpEgpAnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.16 |
|
from EGP' Peer list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP peers.
If an EGP peer is included in this list, this filter applies
to EGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any router.
|
| wfIpEgpAnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.17 |
|
from EGP' Peer AS list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to EGP
advertisements received from EBP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP advertisements
from peers in any AS.
|
| wfIpEgpAnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.18 |
|
from EGP' Gateway list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP gateways.
If an EGP gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpEgpAnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.19 |
|
from BGP' Peer list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains the IP address of one or more BGP peers.
If a BGP peer is included in this list, this filter applies
to BGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any router.
|
| wfIpEgpAnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.20 |
|
from BGP' AS list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements received from BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
from peers in any AS.
|
| wfIpEgpAnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.21 |
|
from BGP' NextHop list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains IP addresses. If an IP address
is included in this list, this filter applies to BGP
advertisements whose NEXT_HOP attribute matches this
IP address.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any NEXT_HOP attribute.
|
| wfIpEgpAnnouncePeer |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.22 |
|
EGP outbound peer list. This is a list of IP addresses
of EGP peers. If a peer appears in this list, the filter
applies to EGP advertisements sent to that peer.
If non-null, The octet string contains one or more 4-octet IP
addresses. If null, this filter applies to any EGP peer.
|
| wfIpEgpAnnounceInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.23 |
|
EGP outbound interface list. This is a list of outgoing
interfaces. If an interface appears in this list, the filter
applies to EGP advertisements sent via that interface.
If non-null, The octet string contains one or more 4-octet IP
addresses. If null, this filter applies to any outbound
interface.
|
| wfIpEgpAnnounceMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.6.1.24 |
|
EGP metric. Only valid if the action is 'propagate'.
This is an optional export metric to use when advertising
a route that matches this filter. If zero, the routing table
metric calculated for EGP is used.
|
| wfIpBgp3AcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.3 |
|
Rule index number
|
| wfIpBgp3AcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.1 |
|
Create/Delete parameter.
|
| wfIpBgp3AcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.2 |
|
Enable/Disable parameter.
|
| wfIpBgp3AcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpBgp3AcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpBgp3AcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpBgp3AcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpBgp3AcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpBgp3AcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpBgp3AcceptPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.10 |
|
BGP-3 Peer AS list. This octet string contains
Autonomous System numbers. If an AS appears in this
list, this filter applies to BGP advertisements from
peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP
advertisements from peers in any AS.
|
| wfIpBgp3AcceptPeerAddress |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.11 |
|
BGP-3 Peer list. This octet string contains the
IP addresses of one or more BGP peers. If a peer
address appears in this list, this filter applies
to BGP advertisements from that peer.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any BGP peer.
|
| wfIpBgp3AcceptOrigAs |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.12 |
|
BGP-3 Originating AS list. This octet string contains
Autonomous System numbers. If an AS appears in this
list, this filter applies to BGP advertisements that have
the AS as their originating AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP
advertisements with any originating AS.
|
| wfIpBgp3AcceptRouteOrigin |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.13 |
|
BGP-3 ORIGIN path attribute. This is a bit map of the
three possible origin types: IGP, EGP, and Incomplete.
If the bit for a particular origin type is on, this filter
applies to all advertisements with that ORIGIN path
attribute.
|
| wfIpBgp3AcceptBgp3Preference |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.14 |
|
BGP-3 preference. For routes that match this filter,
this value is used for comparison against other BGP-3
routes. A larger value is more preferred. Only valid
if 'action' is 'accept'.
|
| wfIpBgp3AcceptAsWeightClass |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.15 |
|
BGP AS Weight Class. For routes that match this filter,
this value indicates which weight values should be used
when calculating the AS path weight (see the AS weights
table). Only valid if 'action' is 'accept'.
|
| wfIpBgp3AcceptCommunityMatch |
.1.3.6.1.4.1.18.3.5.3.2.6.7.1.16 |
|
BGP Community list. This list identifies which
attributes will match this rule. The octet string is
a list of communities. Each community is 4 bytes long.
If the 2 MS bytes are 0, the match is performed on
the lower 16 bits.
A null string means 'match any attribute'.
|
| wfIpBgp3AnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.3 |
|
Rule index number
|
| wfIpBgp3AnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.1 |
|
Create/Delete parameter.
|
| wfIpBgp3AnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.2 |
|
Enable/Disable parameter.
|
| wfIpBgp3AnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpBgp3AnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpBgp3AnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpBgp3AnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpBgp3AnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.8 |
|
route source. This parameter can contain one or more
route source identifiers. If the route source is in this
bit map, then a route from that source that meets the other
criteria of this filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpBgp3AnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.9 |
|
external route source. This parameter can contain one
or more external route source identifiers. If the external
route source is in this bit map, then a route from that
external source that meets the other criteria of this
filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpBgp3AnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpBgp3AnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.11 |
|
from RIP' gateway list. Only applicable for RIP sourced
routes and if RIP is included as a route source. This octet
string contains the addresses of one or more routers that could
send RIP updates to this router. If a router address is
included in this list, this filter applies to RIP
advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpBgp3AnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.12 |
|
from RIP' interface list. Only applicable for RIP
sourced routes and if RIP is included as a route source.
This octet string contains the addresses of one or more
interfaces on this router. If an interface address is
included in this list, this filter applies to RIP
advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpBgp3AnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.13 |
|
from OSPF' Router ID list. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This octet
string contains the router IDs of one or more OSPF routers.
If a router ID is included in this list, this filter applies
to OSPF advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to OSPF updates
from any router.
|
| wfIpBgp3AnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.14 |
|
from OSPF' route type. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This
parameter describes which types of OSPF routes match this
filter. 'any' means match any route type. 'internal'
means 'match any non-ASE'. 'external' means 'match any
ASE'. 'type1' means 'match any external type 1'. 'type2'
means 'match any external type 2
|
| wfIpBgp3AnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.15 |
|
from OSPF' ASE tag list. Only applicable for OSPF sourced
ASE routes and if OSPF is included as a route source. This
octet string contains tag values that could be present in an
OSPF ASE advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpBgp3AnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.16 |
|
from EGP' Peer list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP peers.
If an EGP peer is included in this list, this filter applies
to EGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any router.
|
| wfIpBgp3AnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.17 |
|
from EGP' Peer AS list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to EGP
advertisements received from EBP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP advertisements
from peers in any AS.
|
| wfIpBgp3AnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.18 |
|
from EGP' Gateway list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP gateways.
If an EGP gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpBgp3AnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.19 |
|
from BGP' Peer list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains the IP address of one or more BGP peers.
If a BGP peer is included in this list, this filter applies
to BGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any router.
|
| wfIpBgp3AnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.20 |
|
from BGP' AS list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements received from BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
from peers in any AS.
|
| wfIpBgp3AnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.21 |
|
from BGP' NextHop list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains IP addresses. If an IP address
is included in this list, this filter applies to BGP
advertisements whose NEXT_HOP attribute matches this
IP address.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any NEXT_HOP attribute.
|
| wfIpBgp3AnnouncePeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.22 |
|
BGP-3 Outbound Peer AS list. This octet string
contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements being sent to BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
going to peers in any AS.
|
| wfIpBgp3AnnouncePeer |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.23 |
|
BGP-3 Outbound Peer list. This octet string contains the
IP address of one or more BGP peers. If a BGP peer is
included in this list, this filter applies to BGP
advertisements being sent to that peer.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements being sent to any peer.
|
| wfIpBgp3AnnounceUseMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.24 |
|
Inter-AS Metric Selector. This parameter indicates
whether or not an INTER_AS_METRIC will be advertised
for a network matching this filter and, if advertised,
what value to use. 'none' indicates that no metric will
be advertised. 'specified' indicates that the value in
wfIpBgp3AnnounceInterAsMetric will be used. 'originating'
indicates that the metric from the originating
protocol will be used. Only valid if 'action' is
'announce'.
|
| wfIpBgp3AnnounceInterAsMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.25 |
|
Specific Inter-AS Metric. If wfIpBgp3AnnounceUseMetric
is set to 'specified', this is the value that will be used
for the INTER_AS_METRIC. Only valid if 'action' is
'announce
|
| wfIpBgp3AnnounceOrigin |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.26 |
|
ORIGIN attribute override. If non-null, the ORIGIN
attribute of a route matching this filter will be replaced
with the indicated value. Only valid if 'action' is
'announce'.
|
| wfIpBgp3AnnounceAsPath |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.27 |
|
AS-path override. If non-null, the AS_PATH attribute
of a route matching this filter will be replaced with
the indicated AS path. Each element of the AS path is
2-octet AS number. Only valid if 'action' is
'announce'.
|
| wfIpBgp3AnnounceNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.28 |
|
Announce Next Hop. If action is ANNOUNCE and this
instance is non-zero, then overwrite Next Hop with
specified value.
|
| wfIpBgp3AnnounceCommunity |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.29 |
|
BGP Community list. This identifies which
communities will be associated with this rule.
If non-null, the octet string contains one or
more 4-octet BGP Community numbers.
|
| wfIpBgp3AnnounceCommunityAction |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.30 |
|
Action 'as-is' means that existing BGP Community
attribute is unchanged. 'remove' - all BGP
Communities are removed from an update.
'append' - existing BGP Communities are appended with
the list of communities defined in wfIpBgp3AnnounceCommunity.
'replace' - existing BGP Communities are are replaced
with those defined in wfIpBgp3AnnounceCommunity.
|
| wfIpBgp3AnnounceCommunityMatch |
.1.3.6.1.4.1.18.3.5.3.2.6.8.1.31 |
|
BGP Community list. This list identifies which
attributes will match this rule. The octet string is
a list of communities. Each community is 4 bytes long.
If the 2 MS bytes are 0, the match is performed on
the lower 16 bits. Only applicable to BGP-learnt routes.
A null string means 'match any attribute'.
|
| wfIpBgp4AcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.3 |
|
Rule index number
|
| wfIpBgp4AcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.1 |
|
Create/Delete parameter.
|
| wfIpBgp4AcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.2 |
|
Enable/Disable parameter.
|
| wfIpBgp4AcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpBgp4AcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpBgp4AcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpBgp4AcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpBgp4AcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpBgp4AcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpBgp4AcceptPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.10 |
|
BGP-4 Peer AS list. This octet string contains
Autonomous System numbers. If an AS appears in this
list, this filter applies to BGP advertisements from
peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP
advertisements from peers in any AS.
|
| wfIpBgp4AcceptPeerAddress |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.11 |
|
BGP-4 Peer list. This octet string contains the
IP addresses of one or more BGP peers. If a peer
address appears in this list, this filter applies
to BGP advertisements from that peer.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any BGP peer.
|
| wfIpBgp4AcceptOrigAs |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.12 |
|
BGP-4 Originating AS list. This octet string contains
Autonomous System numbers. If an AS appears in this
list, this filter applies to BGP advertisements that have
the AS as their originating AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP
advertisements with any originating AS.
|
| wfIpBgp4AcceptRouteOrigin |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.13 |
|
BGP-4 ORIGIN path attribute. This is a bit map of the
three possible origin types: IGP, EGP, and Incomplete.
If the bit for a particular origin type is on, this filter
applies to all advertisements with that ORIGIN path
attribute.
|
| wfIpBgp4AcceptAggrAs |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.14 |
|
BGP-4 Aggregator AS list. This octet string contains
Autonomous System numbers. If an AS appears in this
list, this filter applies to BGP advertisements that contain
the AS number in their AGGREGATOR path attribute.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP
advertisements with any AS number in the AGGREGATOR
path attribute.
|
| wfIpBgp4AcceptAggrRouter |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.15 |
|
BGP-4 Aggregator Router list. This octet string contains
the IP addresses of one or more BGP routers. If a router
address appears in this list, this filter applies to BGP
advertisements that contain the address in their AGGREGATOR
path attribute.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any router address in the AGGREGATOR
path attribute.
|
| wfIpBgp4AcceptLocalPref |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.16 |
|
BGP-4 Local Preference override. If non-null,
any route matching this filter takes is assigned a
local preference of the indicated value. This is used
to override the calculated value for EBGP routes or
the LOCAL_PREF path attribute for IBGP routes.
|
| wfIpBgp4AcceptBgp4Preference |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.17 |
|
BGP-4 preference. For routes that match this filter,
this value is used for comparison against other BGP-4
routes. A larger value is more preferred. Only valid
if 'action' is 'accept'.
|
| wfIpBgp4AcceptAsWeightClass |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.18 |
|
BGP AS Weight Class. For routes that match this filter,
this value indicates which weight values should be used
when calculating the AS path weight (see the AS weights
table). Only valid if 'action' is 'accept'.
|
| wfIpBgp4AcceptAsPatternMatch |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.19 |
|
BGP AS_PATH Pattern Match string. This filter applies to BGP
AS_PATH attribute and only routes which as_path matches
the pattern string will be accepted. A pattern string can be
any regular expression; this parameter is ignored if the string
is malformed or not set.
|
| wfIpBgp4AcceptCommunityMatch |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.20 |
|
BGP Community list. This list identifies which
attributes will match this rule. The octet string is
a list of communities. Each community is 4 bytes long.
If the 2 MS bytes are 0, the match is performed on
the lower 16 bits.
A null string means 'match any attribute'.
|
| wfIpBgp4AcceptUseMultiExitDisc |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.21 |
|
Multi-Exit Discriminator Selector. This parameter
indicates whether or not a MULTI_EXIT_DISC will be
accepted for a network matching this filter and, if
accepted, what value to use. 'pass' indicates that the
value will be advertised as received. 'override' indicates
that the value in wfIpBgp4AnnounceMultiExitDisc will be used.
'generate' indicates that the value in
wfIpBgp4AnnounceMultiExitDisc will be used if a MED attr.
is not present in the BGP-4 update message.
'delete' indicates that the metric will be removed
if present in the attribute list. Only valid if
'action' is 'accept'.
|
| wfIpBgp4AcceptMultiExitDisc |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.22 |
|
Specific Multi-Exit Discriminator. If
wfIpBgp4AcceptUseMultiExitDisc is set to 'override' or
'Generate' and there is MED present,
this is the value that will be used for the
MULTI_EXIT_DISC. Only valid if 'action' is 'accept'.
|
| wfIpBgp4AcceptAsPrepend |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.23 |
|
AS Prepend. This octet string contains AS numbers to
be added as a SEQUENCE to AS Path.
|
| wfIpBgp4AcceptCommunity |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.24 |
|
BGP Community list. This identifies which
communities will be associated with this rule.
If non-null, the octet string contains one or
more 4-octet BGP Community numbers.
|
| wfIpBgp4AcceptCommunityAction |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.25 |
|
Action 'as-is' means that existing BGP Community
attribute is unchanged. 'remove' - all BGP
Communities are removed from an update.
'append' - existing BGP Communities are appended with
the list of communities defined in wfIpBgp4AcceptCommunity.
'replace' - existing BGP Communities are are replaced
with those defined in wfIpBgp4AcceptCommunity.
|
| wfIpBgp4AcceptRFDampeningEnable |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.26 |
|
Enables or disables Route Flap Dampening. Route flap dampeni
ng applies only to EBGP learnt routes.
|
| wfIpBgp4AcceptRFDampeningTemplate |
.1.3.6.1.4.1.18.3.5.3.2.6.9.1.27 |
|
If Route Flap Dampening enabled, it will use this value
to index into the wfBgpRouteFlapTemplate table. The default
value of 1, points to the Default Template
|
| wfIpBgp4AnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.3 |
|
Rule index number
|
| wfIpBgp4AnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.1 |
|
Create/Delete parameter.
|
| wfIpBgp4AnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.2 |
|
Enable/Disable parameter.
|
| wfIpBgp4AnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpBgp4AnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpBgp4AnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpBgp4AnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpBgp4AnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.8 |
|
route source. This parameter can contain one or more
route source identifiers. If the route source is in this
bit map, then a route from that source that meets the other
criteria of this filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpBgp4AnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.9 |
|
external route source. This parameter can contain one
or more external route source identifiers. If the external
route source is in this bit map, then a route from that
external source that meets the other criteria of this
filter will match the filter.
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpBgp4AnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpBgp4AnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.11 |
|
from RIP' gateway list. Only applicable for RIP sourced
routes and if RIP is included as a route source. This octet
string contains the addresses of one or more routers that could
send RIP updates to this router. If a router address is
included in this list, this filter applies to RIP
advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpBgp4AnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.12 |
|
from RIP' interface list. Only applicable for RIP
sourced routes and if RIP is included as a route source.
This octet string contains the addresses of one or more
interfaces on this router. If an interface address is
included in this list, this filter applies to RIP
advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpBgp4AnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.13 |
|
from OSPF' Router ID list. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This octet
string contains the router IDs of one or more OSPF routers.
If a router ID is included in this list, this filter applies
to OSPF advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to OSPF updates
from any router.
|
| wfIpBgp4AnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.14 |
|
from OSPF' route type. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This
parameter describes which types of OSPF routes match this
filter. 'any' means match any route type. 'internal'
means 'match any non-ASE'. 'external' means 'match any
ASE'. 'type1' means 'match any external type 1'. 'type2'
means 'match any external type 2
|
| wfIpBgp4AnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.15 |
|
from OSPF' ASE tag list. Only applicable for OSPF sourced
ASE routes and if OSPF is included as a route source. This
octet string contains tag values that could be present in an
OSPF ASE advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpBgp4AnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.16 |
|
from EGP' Peer list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP peers.
If an EGP peer is included in this list, this filter applies
to EGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any router.
|
| wfIpBgp4AnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.17 |
|
from EGP' Peer AS list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to EGP
advertisements received from EBP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP advertisements
from peers in any AS.
|
| wfIpBgp4AnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.18 |
|
from EGP' Gateway list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP gateways.
If an EGP gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpBgp4AnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.19 |
|
from BGP' Peer list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains the IP address of one or more BGP peers.
If a BGP peer is included in this list, this filter applies
to BGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any router.
|
| wfIpBgp4AnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.20 |
|
from BGP' AS list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements received from BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
from peers in any AS.
|
| wfIpBgp4AnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.21 |
|
from BGP' NextHop list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains IP addresses. If an IP address
is included in this list, this filter applies to BGP
advertisements whose NEXT_HOP attribute matches this
IP address.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any NEXT_HOP attribute.
|
| wfIpBgp4AnnouncePeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.22 |
|
BGP-4 Outbound Peer AS list. This octet string
contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements being sent to BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
going to peers in any AS.
|
| wfIpBgp4AnnouncePeer |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.23 |
|
BGP-4 Outbound Peer list. This octet string contains the
IP address of one or more BGP peers. If a BGP peer is
included in this list, this filter applies to BGP
advertisements being sent to that peer.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements being sent to any peer.
|
| wfIpBgp4AnnounceUseMultiExitDisc |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.24 |
|
Multi-Exit Discriminator Selector. This parameter
indicates whether or not a MULTI_EXIT_DISC will be
advertised for a network matching this filter and, if
advertised, what value to use. 'none' indicates that no
value will be advertised. 'specified' indicates that
the value in wfIpBgp4AnnounceMultiExitDisc will be used.
'originating' indicates that the metric from the
originating protocol will be used. Only valid if
'action' is 'announce'.
|
| wfIpBgp4AnnounceMultiExitDisc |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.25 |
|
Specific Multi-Exit Discriminator. If
wfIpBgp4AnnounceUseMultiExitDisc is set to 'specified',
this is the value that will be used for the
MULTI_EXIT_DISC. Only valid if 'action' is 'announce'.
|
| wfIpBgp4AnnounceOrigin |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.26 |
|
ORIGIN attribute override. If non-null, the ORIGIN
attribute of a route matching this filter will be replaced
with the indicated value. Only valid if 'action' is
'announce'.
|
| wfIpBgp4AnnounceAsPath |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.27 |
|
AS-path override. If non-null, the AS_PATH attribute
of a route matching this filter will be replaced with
the indicated AS path. A BGP-4 AS_PATH is composed of AS
path segments. Each AS path segment is represented by a
triple: <path segment type, path segment length, path
segment value>.
The path segment type is a 1-octet long field with the
following values defined:
1: AS_SET: an unordered set of ASes a route in the UPDATE
message has traversed.
2: AS_SEQUENCE: an ordered set of ASes a route in the
UPDATE message has traversed.
The path segment length is a 1-octet long field containing
the number of ASes in the path segment value field.
The path segment value field contains one or more AS numbers,
each encoded as a 2-octet long field.
Only valid if 'action' is 'announce'.
|
| wfIpBgp4AnnounceLocalPrefOverride |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.28 |
|
local pref override. Only valid when advertise
to an IBGP peer. If this is false, the route
weight value will be used to calculate the LOCAL_PREF
path attribute. If this is true, the value in
wfIpBgp4AnnounceLocalPref will be used instead.
|
| wfIpBgp4AnnounceLocalPref |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.29 |
|
local pref override value. Only valid when advertise
to an IBGP peer. and if wfIpBgp4AnnounceLocalPrefOverride
is set to IP_BGP4_ANNOUNCE_LOCAL_PREF_OVERRIDE_TRUE.
If this case, this value is used as the LOCAL_PREF path
attribute.
|
| wfIpBgp4AnnounceNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.30 |
|
Announce Next Hop. If action is ANNOUNCE and this
instance is non-zero, then overwrite Next Hop with
specified value.
|
| wfIpBgp4AnnounceAtomic |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.31 |
|
Announce Atomic aggregation
|
| wfIpBgp4AnnounceAsPatternMatch |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.32 |
|
BGP AS_PATH Pattern Match string. This filter applies to BGP
AS_PATH attribute and only routes which as_path matches
the pattern string will be announced. A pattern string can be
any regular expression; this parameter is ignored if the string
is malformed or not set.
|
| wfIpBgp4AnnounceCommunity |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.33 |
|
BGP Community list. This identifies which
communities will be associated with this rule.
If non-null, the octet string contains one or
more 4-octet BGP Community numbers.
|
| wfIpBgp4AnnounceCommunityAction |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.34 |
|
Action 'as-is' means that existing BGP Community
attribute is unchanged. 'remove' - all BGP
Communities are removed from an update.
'append' - existing BGP Communities are appended with
the list of communities defined in wfIpBgp4AnnounceCommunity.
'replace' - existing BGP Communities are are replaced
with those defined in wfIpBgp4AnnounceCommunity.
|
| wfIpBgp4AnnounceCommunityMatch |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.35 |
|
BGP Community list. This list identifies which
attributes will match this rule. The octet string is
a list of communities. Each community is 4 bytes long.
If the 2 MS bytes are 0, the match is performed on
the lower 16 bits. Only applicable to BGP-learnt routes.
A null string means 'match any attribute'.
|
| wfIpBgp4AnnounceAsPrepend |
.1.3.6.1.4.1.18.3.5.3.2.6.10.1.36 |
|
AS numbers list.This octet string contains AS numbers to
be added as a SEQUENCE to AS Path.
|
| wfIpIgmpGroupPolicyIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.3 |
|
Rule index number
|
| wfIpIgmpGroupPolicyDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.1 |
|
Create/Delete parameter.
|
| wfIpIgmpGroupPolicyDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.2 |
|
Enable/Disable parameter.
|
| wfIpIgmpGroupPolicyName |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpIgmpGroupPolicySources |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.5 |
|
Source identification list. This identifies which
sources will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: source address
next 4 octets: source mask
An entry with an 'exact' tag means to only match the
specific source (number & mask). An
entry with a 'range' tag means to match any source
that falls in the range indicated by the source
and mask.
A null string also means 'match any source'.
|
| wfIpIgmpGroupPolicyAction |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.6 |
|
action. 'accept' means that the group join should be
accepted. 'ignore' means to ignore the group join
|
| wfIpIgmpGroupPolicyPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.7 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpIgmpGroupPolicyPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
Note that the policy match is not 'most specific'
so the precedence has to be used to select from
multiple matches.
|
| wfIpIgmpGroupPolicyInject |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.9 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpIgmpGroupPolicyGroups |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.10 |
|
Group list. This identifies which
groups will match this rule. If non-null, The octet
string contains one or more 2-tuples of this form:
next 4 octets: group number
next 4 octets: group mask
A null string also means 'match any group'.
|
| wfIpIgmpGroupPolicyCircuits |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.11 |
|
Circuit identification list. This identifies which
circuits will match this rule. If non-null, The octet
string contains one or more 2-octet, each representing
a circuit.
A null string also means 'match any circuit'.
|
| wfIpIgmpGroupPolicySenders |
.1.3.6.1.4.1.18.3.5.3.2.6.11.1.12 |
|
Sender identification list. This identifies which
senders will match this rule. If non-null, The octet
string contains one or more 2-tuples of this form:
first 4 octets: sender address
next 4 octets: sender mask
A null string also means 'match any sender'.
|
| wfMTMStaticFwdIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.3 |
|
Rule index number
|
| wfMTMStaticFwdDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.1 |
|
Create/Delete parameter.
|
| wfMTMStaticFwdDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.2 |
|
Enable/Disable parameter.
|
| wfMTMStaticFwdName |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.4 |
|
Rule name - user specified name for this rule
|
| wfMTMStaticFwdGroups |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.5 |
|
Group list. This identifies which
groups will match this rule. If non-null, The octet
string contains one or more 2-tuples of this form:
next 4 octets: group number
next 4 octets: group mask
A null string also means 'match any group'.
|
| wfMTMStaticFwdAction |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.6 |
|
not used. this is here only because of a common
internal data structure
|
| wfMTMStaticFwdPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.7 |
|
If not 0, indicates this policy overwrites multicast protocols
otherwise it can be overwritten by multicast protocols.
If it overwrites protocols, then forwarding decision is made
purely according to the policy; if it can be
overwritten by protocols, then protocols have to be
consulted to make the decision.
For example, s policy 'overwritten_by_procotol' can be
used in the following situation:
Before a multicast protocol comes up on an incoming
circuit, forwarding decision is made according to
the policy. After the protocol comes up, the
protocol will make the decision
|
| wfMTMStaticFwdPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
Note that the policy match is not most specific
so the precedence has to be used to select from
multiple matches.
|
| wfMTMStaticFwdInject |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.9 |
|
not used. this is here only because of a common
internal data structure
|
| wfMTMStaticFwdSources |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.10 |
|
Source identification list. This identifies which
sources will match this rule. If non-null, The octet
string contains one or more 2-tuples of this form:
next 4 octets: source address
next 4 octets: source mask
A null string also means 'match any source'.
|
| wfMTMStaticFwdInCircuits |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.11 |
|
Inbound ircuit ist. This is not a selection
criteria. If non-null, The octet string contains one
or more 2-octet, each representing a circuit on which
mulicast packets whose (s, g) matche this rule
will be accepted.
A null string means those packets should not be accepted
at all
|
| wfMTMStaticFwdOutCircuits |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.12 |
|
Outbound circuit list. This is not a selection
criteria. If non-null, The octet string contains one
or more 2-tuple, each representing a circuit out of
which mulicast packets whose (s, g) matche this rule
will be forwarded.
Each tuple is in the following format:
first 2-octet: circuit number
following 2 octets: ttl threshold
A null string means those packets should not be
forwarded at all.
|
| wfMTMStaticFwdMode |
.1.3.6.1.4.1.18.3.5.3.2.6.12.1.13 |
|
static static entries overrides multicast protocol
decisions
statictodynamic Accept the multicast packet from a
specified non-multicast and static
configured interface and forward it
on to outbound interfaces running
multicast protocols as per multicast
protocol rules
dynamictostatic accept the multicast packet from an
interface running multicast protocol
and forward it on to static configured
non-multicast out bound interfaces
|
| wfIpMospfAcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.3 |
|
Rule index number
|
| wfIpMospfAcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.1 |
|
Create/Delete parameter.
|
| wfIpMospfAcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.2 |
|
Enable/Disable parameter.
|
| wfIpMospfAcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpMospfAcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpMospfAcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpMospfAcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpMospfAcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpMospfAcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpMospfAcceptGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.10 |
|
RIP gateway list. This octet string contains the addresses
of one or more routers that could send RIP updates to this
router. If a router address is included in this list,
this filter applies to RIP advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpMospfAcceptInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.11 |
|
RIP interface list. This octet string contains the
addresses of one or more interfaces on this router. If an
interface address is included in this list, this filter
applies to RIP advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpMospfAcceptApplyMask |
.1.3.6.1.4.1.18.3.5.3.2.6.13.1.12 |
|
Injection Mask: If the 'action' is accept and the
actual received network will be considered, this is an
optional IP address mask that will be applied to the network
number from the RIP update. This is used to override the
interface's subnet mask in the presence of networks with
variable length subnet masks.
|
| wfIpMospfAnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.3 |
|
Rule index number
|
| wfIpMospfAnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.1 |
|
Create/Delete parameter.
|
| wfIpMospfAnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.2 |
|
Enable/Disable parameter.
|
| wfIpMospfAnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpMospfAnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpMospfAnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpMospfAnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpMospfAnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.8 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.9 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpMospfAnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.11 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.12 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.13 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.14 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.15 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.16 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.17 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.18 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.19 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.20 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpMospfAnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.14.1.21 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.3 |
|
Rule index number
|
| wfIpDvmrpAcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.1 |
|
Create/Delete parameter.
|
| wfIpDvmrpAcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.2 |
|
Enable/Disable parameter.
|
| wfIpDvmrpAcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpDvmrpAcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpDvmrpAcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpDvmrpAcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.7 |
|
not used. This is here only for common internal data
structures.
|
| wfIpDvmrpAcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpDvmrpAcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.9 |
|
Network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one 2-tuples of
this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, the network
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
|
| wfIpDvmrpAcceptGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.10 |
|
DVMRP gateway list. This octet string contains the addresses
of one or more routers that could send DVMRP updates to this
router. If a router address is included in this list,
this filter applies to DVMRP advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to DVMRP updates
from any router.
|
| wfIpDvmrpAcceptInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.11 |
|
Dvmrp interface list. This is a list of DVMRP
interfaces. If a interface appears in this list, the filter
applies to DVMRP advertisements received on this interface.
If non-null, The octet string contains 4-octet IP address.
If null, this filter applies to DVMRP updates received on any
DVMRP interface.
|
| wfIpDvmrpAcceptApplyMask |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.12 |
|
Not used in this release
Injection Mask: If the 'action' is accept and the
actual received network will be considered, this is an
optional IP address mask that will be applied to the network
number from the DVMRP update. This is used to override the
interface's subnet mask in the presence of networks with
variable length subnet masks.
|
| wfIpDvmrpAcceptTunnels |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.13 |
|
Dvmrp tunnel list. This is a list of DVMRP tunnels. If
an tunnel interface appears in this listless filter
applies to DVMRP advertisements sent via that tunnel.
Each tunnel takes 8 octets, the first 4 of which are for
local IP address, and the last 4 are for remote IP address
If non-null, The octet string contains one or more 8-octet IP
addresses. If the first 8-octet contains all f, this filter
does not applies to any tunnel. If null, this filter applies
to any DVMRP tunnel.
|
| wfIpDvmrpAcceptInjectMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.15.1.14 |
|
Inject Route Metric. This value represents the cost of the
aggregated route which associates with wfIpDvmrpAcceptInject
mib injects into DVMRP routing table.
The default value is set to 1.
|
| wfIpDvmrpAnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.3 |
|
Rule index number
|
| wfIpDvmrpAnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.1 |
|
Create/Delete parameter.
|
| wfIpDvmrpAnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.2 |
|
Enable/Disable parameter.
|
| wfIpDvmrpAnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpDvmrpAnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpDvmrpAnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpDvmrpAnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpDvmrpAnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.8 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.9 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.10 |
|
Network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, the network
in this list will be advertised. If the list is null, the
actual network is advertised.
|
| wfIpDvmrpAnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.11 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.12 |
|
Not used. Only here because of common internal data
structures.
|
| wfIpDvmrpAnnounceOspfRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.13 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceOspfType |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.14 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceOspfTag |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.15 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.16 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.17 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.18 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.19 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.20 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.21 |
|
not used. this is here only because of a common
internal data structure
|
| wfIpDvmrpAnnounceCircuits |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.22 |
|
Dvmrp circuit list. This is a list of DVMRP
circuits. If a circuit appears in this list, the filter
applies to DVMRP advertisements sent via that circuit.
If non-null, The octet string contains one or more 2-octet
circuit number. If the first 2-octet contains all f, this
filter does not applies to any circuits. If null, this
filter applies to any outbound
DVMRP circuit.
|
| wfIpDvmrpAnnounceTunnels |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.23 |
|
Dvmrp tunnel list. This is a list of DVMRP
tunnels. If an tunnel interface appears in this list,the filter
applies to DVMRP advertisements sent via that tunnel.
Each tunnel takes 8 octets, the first 4 of which are for
local IP address, and the last 4 are for remote IP address
If non-null, The octet string contains one or more 8-octet IP
addresses. If the first 8-octet contains all f, this filter
does not applies to any tunnel. If null, this filter applies
to any DVMRP tunnel.
|
| wfIpDvmrpAnnounceMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.24 |
|
Route Metric. This value is announced as the metric for the
routes specified in the network identification list.
If non-null, then the routes for the specified networks in the
network identification list are advertised with this metric
even it differs from the metric in the routing table. If null,
then the metrics in the routing table are advertised.
|
| wfIpDvmrpAnnounceInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.16.1.25 |
|
Dvmrp interface list. This is a list of DVMRP
interfaces. If a interface appears in this list, the filter
applies to DVMRP advertisements sent via that interface.
If non-null, The octet string contains 4-octet IP address.
If null, this filter applies to any outbound DVMRP interface.
|
| wfIpDvmrpInjectRtIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.3 |
|
Rule index number
|
| wfIpDvmrpInjectRtDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.1 |
|
Create/Delete parameter.
|
| wfIpDvmrpInjectRtDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.2 |
|
Enable/Disable parameter.
|
| wfIpDvmrpInjectRtName |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpDvmrpInjectRtNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
A null string also means 'match any route'.
|
| wfIpDvmrpInjectRtAction |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.6 |
|
action. 'accept' means that the route should be
imported from RTM to the DVMRP routing table. 'ignore'
means don't consider the route
|
| wfIpDvmrpInjectRtPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.7 |
|
preference. This is a metric to be used to compare
the preference path between inject route or the existing
route in DVMRP routing table. If the injecting unicast
route is prefered, then the value need to be set higher than
the preference of the existing route.
The routes learned from DVMRP network always has preference
set to 1.
This parameter only has meaning if the action is 'accept'.
|
| wfIpDvmrpInjectRtPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
Note that the policy match is not most specific
so the precedence has to be used to select from
multiple matches.
|
| wfIpDvmrpInjectRtInject |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one 2-tuples of
this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, the network
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
|
| wfIpDvmrpInjectRtInInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.10 |
|
Injected unicast routes inbound circuit list.
This octet string contains one or more 4-octet IP addresses.
If an interface address is included in this list, the unicast
routes received on that interface match this rule will be
accepted.
If null, this filter applies to unicast routes received on
any interface.
|
| wfIpDvmrpInjectRtType |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.11 |
|
Select the injected route type from RTM.
|
| wfIpDvmrpInjectRtMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.17.1.12 |
|
Route Metric. This value represents the cost of the external
routes which are OSPF or unicast best route to be injected
into DVMRP routing table. The default value is set to 1.
|
| wfIpIisisAcceptIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.3 |
|
Rule index number
|
| wfIpIisisAcceptDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.1 |
|
Create/Delete parameter.
|
| wfIpIisisAcceptDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.2 |
|
Enable/Disable parameter.
|
| wfIpIisisAcceptName |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpIisisAcceptNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpIisisAcceptAction |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.6 |
|
action. 'accept' means that the route should be
considered for inclusion in the routing table. 'ignore'
means don't consider the route
|
| wfIpIisisAcceptPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.7 |
|
preference. This is a metric to be used to compare
the route to other routes to the same destination. A
value of 16 is 'most preferred'. This parameter only has
meaning if the action is 'accept'.
|
| wfIpIisisAcceptPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpIisisAcceptInject |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.9 |
|
network injection list. this octet string should only be
non-null if the action is 'accept' and if it is desired to
insert networks into the routing table that differ from
the actual advertised network. For instance, if a number of
networks in a certain range are learned, an aggregate
advertisement could be inserted instead of the individual
networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be considered for inclusion in the routing
table. If the list is null, the actual received network is
considered.
An encoding of 255.255.255.255/255.255.255.255 means 'match the
actual received network.' This allows insertion of an
aggregate or default along with the actual network.
Currently, this is only used for routes received via BGP.
|
| wfIpIisisAcceptType |
.1.3.6.1.4.1.18.3.5.3.2.6.18.1.10 |
|
Integrated IS-IS external metric type. This
parameter describes which types of Integrated IS-IS routes
match this filter.
'any' means 'match either internal or external'.
|
| wfIpIisisAnnounceIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.3 |
|
Rule index number
|
| wfIpIisisAnnounceDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.1 |
|
Create/Delete parameter.
|
| wfIpIisisAnnounceDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.2 |
|
Enable/Disable parameter.
|
| wfIpIisisAnnounceName |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.4 |
|
Rule name - user specified name for this rule
|
| wfIpIisisAnnounceNetworks |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.5 |
|
Network identification list. This identifies which
networks will match this rule. If non-null, The octet
string contains one or more 3-tuples of this form:
first octet: exact (1) or range (2)
next 4 octets: network number
next 4 octets: network mask
An entry with an 'exact' tag means to only match the
specific network advertisement (number & mask). An
entry with a 'range' tag means to match any network
number that falls in the range indicated by the number
and mask.
An 'exact' encoding of 0.0.0.0/0.0.0.0 means 'match the
default route. A 'range' encoding of 0.0.0.0/0.0.0.0 means
'match any route'.
A null string also means 'match any route'.
|
| wfIpIisisAnnounceAction |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.6 |
|
action. 'announce' means that the route should be
advertised. 'ignore' means don't advertise the route.
|
| wfIpIisisAnnouncePrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.7 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
|
| wfIpIisisAnnounceRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.8 |
|
route source. This parameter can contain one or more
route source identifiers. If the route source is in this
bit map, then a route from that source that meets the other
criteria of this filter will match the filter. In the first
phase of Integrated IS-IS only direct and static are being
considered
bit 0 bit 31
+---------------------------------------+
| |
+---------------------------------------+
bit31 DIRECT
bit30 STATIC
bit29 RIP
bit28 OSPF
bit27 EGP
bit26 BGP
|
| wfIpIisisAnnounceExtRouteSource |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.9 |
|
NOT USED for Integrated IS-IS
external route source. This parameter can contain one
or more external route source identifiers. If the external
route source is in this bit map, then a route from that
external source that meets the other criteria of this
filter will match the filter. Not valid for OSPF announce rules
.
|
| wfIpIisisAnnounceAdvertise |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.10 |
|
network advertisement list. this octet string should
only be non-null if the action is 'announce' and if it is
desired to advertise networks that differ from the actual
network in the routing table. For instance, if a number of
networks in a certain range are in the table, an aggregate
could be advertised instead of the individual networks.
If non-null, The octet string contains one or more 2-tuples
of this form:
first 4 octets: network number
next 4 octets: network mask
Upon receiving a route that matches this filter, all networks
in this list will be advertised. If the list is null, the
actual network is advertised.
An encoding of 255.255.255.255/255.255.255.255 means 'match
the actual network.' This allows advertisement of an aggregate
or default along with the actual network.
|
| wfIpIisisAnnounceRipGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.11 |
|
Not applicable for first phase of Integrated IS_IS
from RIP' gateway list. Only applicable for RIP sourced
routes and if RIP is included as a route source. This octet
string contains the addresses of one or more routers that could
send RIP updates to this router. If a router address is
included in this list, this filter applies to RIP
advertisements from that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
from any router.
|
| wfIpIisisAnnounceRipInterface |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.12 |
|
Not applicable for first phase of Integrated IS_IS
from RIP' interface list. Only applicable for RIP
sourced routes and if RIP is included as a route source.
This octet string contains the addresses of one or more
interfaces on this router. If an interface address is
included in this list, this filter applies to RIP
advertisements received on that interface.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to RIP updates
received on any interface.
|
| wfIpIisisAnnounceIisisRouterId |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.13 |
|
Not applicable for first phase of Integrated IS_IS
from OSPF' Router ID list. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This octet
string contains the router IDs of one or more OSPF routers.
If a router ID is included in this list, this filter applies
to OSPF advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to OSPF updates
from any router.
|
| wfIpIisisAnnounceIisisType |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.14 |
|
Not applicable for first phase of Integrated IS_IS
from OSPF' route type. Only applicable for OSPF sourced
routes and if OSPF is included as a route source. This
parameter describes which types of OSPF routes match this
filter. 'any' means match any route type. 'internal'
means 'match any non-ASE'. 'external' means 'match any
ASE'. 'type1' means 'match any external type 1'. 'type2'
means 'match any external type 2
|
| wfIpIisisAnnounceIisisTag |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.15 |
|
Not applicable for first phase of Integrated IS_IS
from OSPF' ASE tag list. Only applicable for OSPF sourced
ASE routes and if OSPF is included as a route source. This
octet string contains tag values that could be present in an
OSPF ASE advertisement. If a tag value is included in this
list, this filter applies to OSPF ASE advertisements that
contain this tag value.
If non-null, The octet string contains one or more 4-octet
tag values. If null, this filter applies to OSPF ASEs with
any tag value.
|
| wfIpIisisAnnounceEgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.16 |
|
Not applicable for first phase of Integrated IS_IS
from EGP' Peer list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP peers.
If an EGP peer is included in this list, this filter applies
to EGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements from any router.
|
| wfIpIisisAnnounceEgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.17 |
|
Not applicable for first phase of Integrated IS_IS
from EGP' Peer AS list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to EGP
advertisements received from EBP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to EGP advertisements
from peers in any AS.
|
| wfIpIisisAnnounceEgpGateway |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.18 |
|
Not applicable for first phase of Integrated IS_IS
from EGP' Gateway list. Only applicable for EGP sourced
routes and if EGP is included as a route source. This octet
string contains the IP address of one or more EGP gateways.
If an EGP gateway is included in this list, this filter applies
to EGP advertisements that use this gateway as the next hop.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to EGP
advertisements with any gateway address.
|
| wfIpIisisAnnounceBgpPeer |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.19 |
|
Not applicable for first phase of Integrated IS_IS
from BGP' Peer list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains the IP address of one or more BGP peers.
If a BGP peer is included in this list, this filter applies
to BGP advertisements authored by that router.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements from any router.
|
| wfIpIisisAnnounceBgpPeerAs |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.20 |
|
Not applicable for first phase of Integrated IS_IS
from BGP' AS list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains Autonomous System Numbers. If an AS number
is included in this list, this filter applies to BGP
advertisements received from BGP peers in that AS.
If non-null, The octet string contains one or more 2-octet
AS numbers. If null, this filter applies to BGP advertisements
from peers in any AS.
|
| wfIpIisisAnnounceBgpNextHop |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.21 |
|
Not applicable for first phase of Integrated IS_IS
from BGP' NextHop list. Only applicable for BGP sourced
routes and if BGP is included as a route source. This octet
string contains IP addresses. If an IP address
is included in this list, this filter applies to BGP
advertisements whose NEXT_HOP attribute matches this
IP address.
If non-null, The octet string contains one or more 4-octet
IP addresses. If null, this filter applies to BGP
advertisements with any NEXT_HOP attribute.
|
| wfIpIisisAnnounceType |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.22 |
|
OSPF ASE type. The ASE type to use for routes that
match this filter. This is only applicable if the
action is 'accept'. A zero value means to use the
default ASE type for the route source.
|
| wfIpIisisAnnounceTag |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.23 |
|
Not applicable for Integrated IS-IS
OSPF ASE tag. The ASE tag value to use for routes
that match this filter. This is only applicable if the
action is 'accept' and autotag is set to 'disable'.
|
| wfIpIisisAnnounceAutoTag |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.24 |
|
Not applicable for Integrated IS-IS
BGP/OSPF automatic tag generation: Only applicable
if action is 'announce'. if set to 'disabled',
the value in wfIpIisisAnnounceTag will be used for a tag.
If set to 'enabled', a tag will be generated according
to the criteria in RFC 1403 (or any RFC that supercedes
it).
|
| wfIpIisisAnnounceMetric |
.1.3.6.1.4.1.18.3.5.3.2.6.19.1.25 |
|
The optional metric to apply to this route.
Zero means : use the route's actual cost. Only
valid for propagate.
|
| wfMTMStaticForwardIndex |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.3 |
|
Rule index number
|
| wfMTMStaticForwardDelete |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.1 |
|
Create/Delete parameter.
|
| wfMTMStaticForwardDisable |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.2 |
|
Enable/Disable parameter.
|
| wfMTMStaticForwardName |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.4 |
|
Rule name - user specified name for this rule
|
| wfMTMStaticForwardGroups |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.5 |
|
Group list. This identifies which
groups will match this rule. If non-null, The octet
string contains one or more 2-tuples of this form:
First octet : 0x1(exact) or 0x2 (range)
next 4 octets: group number
next 4 octets: group mask
A null string also means 'match any group'.
|
| wfMTMStaticForwardAction |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.6 |
|
not used. this is here only because of a common
internal data structure
|
| wfMTMStaticForwardPreference |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.7 |
|
note: Not used .This is here only for common internal
data structures
|
| wfMTMStaticForwardPrecedence |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.8 |
|
precedence. This is a metric to be used to compare
this policy rule to other rules that a given route may
match. A rule with a higher precedence value will be
chosen over one with a smaller value. In the case of
a tie, the rule index is used (larger wins).
Note that the policy match is not most specific
so the precedence has to be used to select from
multiple matches.
|
| wfMTMStaticForwardInject |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.9 |
|
not used. this is here only because of a common
internal data structure
|
| wfMTMStaticForwardSources |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.10 |
|
Source identification list. This identifies which
sources will match this rule. If non-null, The octet
string contains one or more 2-tuples of this form:
next 4 octets: source address
next 4 octets: source mask
A null string also means 'match any source'.
|
| wfMTMStaticForwardInCircuits |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.11 |
|
Inbound ircuit ist. This is not a selection
criteria. If non-null, The octet string contains one
or more 2-octet, each representing a circuit on which
mulicast packets whose (s, g) matche this rule
will be accepted.
A null string means those packets should not be accepted
at all
|
| wfMTMStaticForwardOutCircuits |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.12 |
|
Outbound circuit list. This is not a selection
criteria. If non-null, The octet string contains one
or more 2-tuple, each representing a circuit out of
which mulicast packets whose (s, g) matche this rule
will be forwarded.
Each tuple is in the following format:
first 2-octet: circuit number
following 2 octets: ttl threshold
A null string means those packets should not be
forwarded at all.
|
| wfMTMStaticForwardMode |
.1.3.6.1.4.1.18.3.5.3.2.6.20.1.13 |
|
static static entries overrides multicast protocol
decisions
statictodynamic Accept the multicast packet from a
specified non-multicast and static
configured interface and forward it
on to outbound interfaces running
multicast protocols as per multicast
protocol rules
dynamictostatic accept the multicast packet from an
interface running multicast protocol
and forward it on to static configured
non-multicast out bound interfaces
|
