Wellfleet-MODCTL-MIB.mib object view, vendor Wellfleet
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-MODCTL-MIB and use it to monitor vendor specific OID's.
Wellfleet-MODCTL-MIB file content
Object view of Wellfleet-MODCTL-MIB:
| Scalar Object |
| wfModCtlPrimarySlot |
.1.3.6.1.4.1.18.3.4.34.1.1.1 |
|
The slot number of the CPR slot acting as the
primary MCD
|
| wfModCtlState |
.1.3.6.1.4.1.18.3.4.34.1.1.2 |
|
The current state of the Module Control Driver
|
| wfModCtlActiveMask |
.1.3.6.1.4.1.18.3.4.34.1.1.3 |
|
Bit mask indicating which slots are operational
|
| wfModCtlCfgSlotDisableMask |
.1.3.6.1.4.1.18.3.4.34.1.1.4 |
|
Bit mask indicating which slots are prevented from
entering the active state.
|
| wfModCtlCfgHeartbeatPeriod |
.1.3.6.1.4.1.18.3.4.34.1.1.5 |
|
The timer period, in seconds, which defines how often
heartbeat messages are sent to active Co-processors.
|
| wfModCtlCfgHeartbeatDisableMask |
.1.3.6.1.4.1.18.3.4.34.1.1.6 |
|
Bit mask indicating which slots participate in
heartbeat checks from the primary SSP.
|
| wfModCtlCfgBoflFailPeriod |
.1.3.6.1.4.1.18.3.4.34.1.1.7 |
|
The timer period, in seconds, which defines how long
to wait following a Bofl failure before taking more
drastic action to establish a valid DPI path.
|
| wfModCtlCfgBoflDisableMask |
.1.3.6.1.4.1.18.3.4.34.1.1.8 |
|
Bit mask indicating which L3 slots participate in
BOFL checks for a valid DPI path from the primary SSP.
|
| wfModCtlCfgRspImageType |
.1.3.6.1.4.1.18.3.4.34.1.1.9 |
|
Type of image to be loaded on the RSP by the IFP driver.
|
| wfModCtlDbgMsgLevel |
.1.3.6.1.4.1.18.3.4.34.1.1.10 |
|
MCD log messages level
To control certain level of log messages
MCD_DBG_MSG_ALL 0x001f0000 - 2031616
MCD_DBG_MSG_DEBUG 0x00010000 - 65536
MCD_DBG_MSG_INFO 0x00020000 - 131072
MCD_DBG_MSG_WARNING 0x00040000 - 262144
MCD_DBG_MSG_FAULT 0x00080000 - 524288
MCD_DBG_MSG_TRACE 0x00100000 - 1048576
|
| wfModCtlScdLogMask |
.1.3.6.1.4.1.18.3.4.34.1.1.11 |
|
The log mask is a bit mask used by the SCD to enable
various log levels.
SCD_LOG_MASK_NONE 0x00000000
SCD_LOG_MASK_INST 0x00000001
SCD_LOG_MASK_DCI 0x00000002
SCD_LOG_MASK_R4 0x00000004
SCD_LOG_MASK_DBG_DISPLAY 0x00000008
SCD_LOG_MASK_SCI 0x00000010
SCD_LOG_MASK_STATS 0x00000020
|
| wfModCtlScdDbgMask |
.1.3.6.1.4.1.18.3.4.34.1.1.12 |
|
The debug log mask is used to control the SCD ability
to execute and log debug specific functions
|
| Object Identifier |
| wfModCtlBase |
.1.3.6.1.4.1.18.3.4.34.1.1 |
