Wellfleet-OSI-MIB device MIB details by Wellfleet
Wellfleet-OSI-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Wellfleet-OSI-MIB.
| Vendor: | Wellfleet |
|---|---|
| Mib: | Wellfleet-OSI-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Wellfleet-OSI-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:46:01 EDT 1995 IMPORTS Counter, Opaque FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfOsiGroup FROM Wellfleet-COMMON-MIB; wfOsi OBJECT IDENTIFIER ::= { wfOsiGroup 1 } wfOsiDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether OSI is configured on this slot." DEFVAL { created } ::= { wfOsi 1 } wfOsiDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether OSI is to startup." DEFVAL { enabled } ::= { wfOsi 2 } wfOsiState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value determines whether OSI is to startup." DEFVAL { notpresent } ::= { wfOsi 3 } wfOsiIsisVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This read-only parameter identifies the version number of the IS-IS protocol to which this node conforms to. " ::= { wfOsi 4 } wfOsiRouterType OBJECT-TYPE SYNTAX INTEGER { l1only(1), l1l2(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether this system is an L1-only router or L1-L2 IS." DEFVAL { l1l2 } ::= { wfOsi 5 } wfOsiRouterId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This value contains the system ID of this Intermediate System. If no value is entered by the user, Site Manager should supply a 6-byte value that will be unique (a MAC address would work). " ::= { wfOsi 6 } wfOsiLoadBal OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This Boolean defines whether or not we are doing load balancing over multiple paths." DEFVAL { disabled } ::= { wfOsi 7 } wfOsiMaxAreas OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum allowable number of areas addresses for the domain that this router exists in." DEFVAL { 63 } ::= { wfOsi 8 } wfOsiMaxEs OBJECT-TYPE SYNTAX INTEGER(1..4000) ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum allowable number of End Systems for the area that this router exists in." DEFVAL { 512 } ::= { wfOsi 9 } wfOsiMaxL1Is OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum allowable number of L1 Intermediate Systems for the area that this router exists in." DEFVAL { 15 } ::= { wfOsi 10 } wfOsiMaxL2Is OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum allowable number of L2 Intermediate Systems for the domain that this router exists in." DEFVAL { 63 } ::= { wfOsi 11 } wfOsiMaxExtAddr OBJECT-TYPE SYNTAX INTEGER(1..500) ACCESS read-write STATUS mandatory DESCRIPTION "This value defines the maximum allowable number of External Addresses for the domain that this router exists in. The default value of this field is 0." DEFVAL { 1 } ::= { wfOsi 12 } wfOsiCksumIsPdus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value indicates whether ISIS PDUs will carry a checksum." DEFVAL { enabled } ::= { wfOsi 13 } wfOsiL1LspPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This assigns a password such that only L1 Lsps with the matching password will be accepted. All L1 Lsps generated by this system will contain this string in the password option." ::= { wfOsi 14 } wfOsiL2LspPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This assigns a password such that only L2 Lsps with the matching password will be accepted. All L2 Lsps generated by this system will contain this string in the password option." ::= { wfOsi 15 } wfOsiAreaAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This Assigns the area address for this router. This field must be filled in. If the user doesn't enter a value, then assign 490040. Site Manager must force the user to enter at least a 3-byte value for this field. " ::= { wfOsi 16 } wfOsiAreaAddrAlias1 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This Assigns the first area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length." ::= { wfOsi 17 } wfOsiAreaAddrAlias2 OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "This Assigns the second area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length." ::= { wfOsi 18 } wfOsiCorruptedLsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Corrupted Lsps Detected." ::= { wfOsi 19 } wfOsiL1LspDbOverloads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the L1 Lsp Database Overload event has been generated. " ::= { wfOsi 20 } wfOsiL2LspDbOverloads OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the L2 Lsp Database Overload event has been generated. " ::= { wfOsi 21 } wfOsiManAddrDroppedAreas OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the Manual Address Dropped from Area event has been generated. " ::= { wfOsi 22 } wfOsiSeqNumberSkips OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the Sequence Number Skipped event has been generated. " ::= { wfOsi 23 } wfOsiOwnLspPurges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the Own Lsp Purged event has been generated. " ::= { wfOsi 24 } wfOsiOthLspPurges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the Other Lsp Purged event has been generated. " ::= { wfOsi 25 } wfOsiExceedMaxSeqNums OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the Attempt tp Exceed Maximum Sequence Number event has been generated. " ::= { wfOsi 26 } wfOsiNearestL2Is OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the Nearest L2 system in this area." ::= { wfOsi 27 } wfOsiMaxDynEs OBJECT-TYPE SYNTAX INTEGER(1..4000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of dynamically learned (via Hello) End Systems allowed per slot." DEFVAL { 1024 } ::= { wfOsi 28 } wfOsiMaxDynL1Is OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of dynamically learned (via Hello) Level 1 Intermediate Systems allowed per slot." DEFVAL { 64 } ::= { wfOsi 29 } wfOsiMaxDynL2Is OBJECT-TYPE SYNTAX INTEGER(1..1000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the maximum number of dynamically learned (via Hello) Level 2 Intermediate Systems allowed per slot." DEFVAL { 64 } ::= { wfOsi 30 } wfOsiNumDynEsAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Dynamic ES adjs the osi master gate receives from the cct gate. " ::= { wfOsi 31 } wfOsiNumDynL1Adjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Dynamic L1 adjs the osi master gate receives from the cct gate. " ::= { wfOsi 32 } wfOsiNumDynL2Adjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Dynamic L2 adjs the osi master gate receives from the cct gate. " ::= { wfOsi 33 } wfOsiNumL1Routes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 Routes. WL 2.27.93" ::= { wfOsi 34 } wfOsiNumL2Routes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 Routes. WL 2.27.93" ::= { wfOsi 35 } wfOsiNumDynPtpEsAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Dynamic Point-to-Point ES adjs the osi master gate receives on." ::= { wfOsi 36 } wfOsiNumDynPtpIsAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Dynamic Point-to-Point IS adjs the osi master gate receives on ." ::= { wfOsi 37 } wfOsiClnpSrcRtOptionDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable processing of Source Route options in CLNP PDUs. This is required for GOSIP v2 support. GOSIP prohibits processing Source Routing options. " DEFVAL { enabled } ::= { wfOsi 38 } wfOsiNumL1Lsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L1 LSPs stored in database." ::= { wfOsi 39 } wfOsiNumL2Lsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of L2 LSPs stored in database." ::= { wfOsi 40 } wfOsiStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the static routes for this system." ::= { wfOsiGroup 2 } wfOsiStaticRouteEntry OBJECT-TYPE SYNTAX WfOsiStaticRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the Static Route Entry for the Static Route Table." INDEX { wfOsiStaticRouteAddr } ::= { wfOsiStaticRouteTable 1 } WfOsiStaticRouteEntry ::= SEQUENCE { wfOsiStaticRouteDelete INTEGER, wfOsiStaticRouteDisable INTEGER, wfOsiStaticRouteAddr OCTET STRING, wfOsiStaticRouteNibbleLength INTEGER, wfOsiStaticRouteNextHopIs OCTET STRING, wfOsiStaticRouteType INTEGER, wfOsiStaticRouteCost INTEGER } wfOsiStaticRouteDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/Delete parameter for Osi Static Route Record." DEFVAL { created } ::= { wfOsiStaticRouteEntry 1 } wfOsiStaticRouteDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for this Static Route." DEFVAL { enabled } ::= { wfOsiStaticRouteEntry 2 } wfOsiStaticRouteAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (20)) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the address of the static route. It is also the inst_id." ::= { wfOsiStaticRouteEntry 3 } wfOsiStaticRouteNibbleLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the length in nibbles of the static route address. It is necessary to specify it in nibbles since the static route may be an external address which can be specified in nibbles." ::= { wfOsiStaticRouteEntry 4 } wfOsiStaticRouteNextHopIs OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This is the 6-octet ID of the next Hop IS that all data destined to wfOsiStaticRouteAddr will be forwarded to." ::= { wfOsiStaticRouteEntry 5 } wfOsiStaticRouteType OBJECT-TYPE SYNTAX INTEGER { es(9), areaaddr(11), extaddr(13) } ACCESS read-write STATUS mandatory DESCRIPTION "This specifies whether the destination is an End System, an area, or an external Domain." DEFVAL { es } ::= { wfOsiStaticRouteEntry 6 } wfOsiStaticRouteCost OBJECT-TYPE SYNTAX INTEGER(1..1023) ACCESS read-write STATUS mandatory DESCRIPTION "This value is the cost to get to this address." DEFVAL { 20 } ::= { wfOsiStaticRouteEntry 7 } wfOsiCircuitTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This Table contains all circuit configuration info counters available on a per circuit basis." ::= { wfOsiGroup 3 } wfOsiCircuitEntry OBJECT-TYPE SYNTAX WfOsiCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the circuit entry record that appears in the Circuit Table." INDEX { wfOsiCircuitId } ::= { wfOsiCircuitTable 1 } WfOsiCircuitEntry ::= SEQUENCE { wfOsiCircuitDelete INTEGER, wfOsiCircuitDisable INTEGER, wfOsiCircuitState INTEGER, wfOsiCircuitId INTEGER, wfOsiCircuitRouterLevel INTEGER, wfOsiCircuitL1DefaultMetric INTEGER, wfOsiCircuitL2DefaultMetric INTEGER, wfOsiCircuitL1DrPriority INTEGER, wfOsiCircuitL2DrPriority INTEGER, wfOsiCircuitIsisHelloTimer INTEGER, wfOsiCircuitEsisHelloTimer INTEGER, wfOsiCircuitEshConfigTime INTEGER, wfOsiCircuitPassword DisplayString, wfOsiCircuitReceivedPkts Counter, wfOsiCircuitSentPkts Counter, wfOsiCircuitDroppedPkts Counter, wfOsiCircuitFragmentedPdus Counter, wfOsiCircuitCongestionDiscards Counter, wfOsiCircuitAddrUnreachDiscards Counter, wfOsiCircuitAgedPduDiscards Counter, wfOsiCircuitPduFormatErrDiscards Counter, wfOsiCircuitUnsuppOptsDiscards Counter, wfOsiCircuitSentErrorReports Counter, wfOsiCircuitReceivedControlPdus Counter, wfOsiCircuitSentControlPdus Counter, wfOsiCircuitStateChanges Counter, wfOsiCircuitAdjStateChanges Counter, wfOsiCircuitInitFailures Counter, wfOsiCircuitRejectedAdjs Counter, wfOsiCircuitReceivedBadLsps Counter, wfOsiCircuitReceivedBadSnps Counter, wfOsiCircuitReceivedBadEshs Counter, wfOsiCircuitReceivedBadL1Iihs Counter, wfOsiCircuitReceivedBadL2Iihs Counter, wfOsiCircuitL1DrChanges Counter, wfOsiCircuitL2DrChanges Counter, wfOsiCircuitClnpForwarding Counter, wfOsiCircuitClnpDefaultLifeTime Counter, wfOsiCircuitClnpInReceives Counter, wfOsiCircuitClnpInAddrErrors Counter, wfOsiCircuitClnpForwPdus Counter, wfOsiCircuitClnpInUnknownNlps Counter, wfOsiCircuitClnpInDelivers Counter, wfOsiCircuitClnpInUnknownUlps Counter, wfOsiCircuitClnpSegCreates Counter, wfOsiCircuitClnpInOpts Counter, wfOsiCircuitClnpOutOpts Counter, wfOsiCircuitEsisEshIns Counter, wfOsiCircuitEsisIshOuts Counter, wfOsiCircuitEsisRduOuts Counter, wfOsiCircuitL1DesignatedRouter OCTET STRING, wfOsiCircuitL2DesignatedRouter OCTET STRING, wfOsiCircuitClnpOutEchoReplies Counter, wfOsiCircuitClnpOutEchoRequests Counter, wfOsiCircuitClnpInEchoReplies Counter, wfOsiCircuitClnpInEchoRequests Counter, wfOsiCircuitNumDynEsAdjs Counter, wfOsiCircuitNumDynL1Adjs Counter, wfOsiCircuitNumDynL2Adjs Counter, wfOsiCircuitNumDynPtpIsAdjs Counter, wfOsiCircuitNumDynPtpEsAdjs Counter, wfOsiCircuitBadIshReceived Counter, wfOsiCircuitEsisIshIns Counter, wfOsiCircuitIihHoldMultiplier INTEGER, wfOsiCircuitIshHoldMultiplier INTEGER, wfOsiCircuitDisableRedirect INTEGER } wfOsiCircuitDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether this circuit is configured." DEFVAL { created } ::= { wfOsiCircuitEntry 1 } wfOsiCircuitDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for this circuit." DEFVAL { enabled } ::= { wfOsiCircuitEntry 2 } wfOsiCircuitState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates whether the circuit state is up or down." DEFVAL { down } ::= { wfOsiCircuitEntry 3 } wfOsiCircuitId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each known circuit." ::= { wfOsiCircuitEntry 4 } wfOsiCircuitRouterLevel OBJECT-TYPE SYNTAX INTEGER { l1(1), l2(2), l1l2(3), ext(4), l2ext(6), l1l2ext(7), esisonly(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only." DEFVAL { l1l2 } ::= { wfOsiCircuitEntry 5 } wfOsiCircuitL1DefaultMetric OBJECT-TYPE SYNTAX INTEGER(1..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the default cost of using this circuit for L1 traffic." DEFVAL { 20 } ::= { wfOsiCircuitEntry 6 } wfOsiCircuitL2DefaultMetric OBJECT-TYPE SYNTAX INTEGER(1..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the default cost of using this circuit for L2 traffic." DEFVAL { 20 } ::= { wfOsiCircuitEntry 7 } wfOsiCircuitL1DrPriority OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This is the priority for this system to become L1 designated router on this LAN circuit." DEFVAL { 64 } ::= { wfOsiCircuitEntry 8 } wfOsiCircuitL2DrPriority OBJECT-TYPE SYNTAX INTEGER(1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This is the priority for this system to become L2 designated router on this LAN circuit." DEFVAL { 64 } ::= { wfOsiCircuitEntry 9 } wfOsiCircuitIsisHelloTimer OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This is the period (secs) between IIH hello transmissions." DEFVAL { 8 } ::= { wfOsiCircuitEntry 10 } wfOsiCircuitEsisHelloTimer OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This is the period (secs) between ISH hello transmissions." DEFVAL { 30 } ::= { wfOsiCircuitEntry 11 } wfOsiCircuitEshConfigTime OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This is the suggested time between ESH transmissions from an ES went in ISHs (ESCT)." DEFVAL { 600 } ::= { wfOsiCircuitEntry 12 } wfOsiCircuitPassword OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password." ::= { wfOsiCircuitEntry 13 } wfOsiCircuitReceivedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of pkts that have been received on this circuit." ::= { wfOsiCircuitEntry 14 } wfOsiCircuitSentPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of pkts sent out this circuit." ::= { wfOsiCircuitEntry 15 } wfOsiCircuitDroppedPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of pkts dropped on this circuit." ::= { wfOsiCircuitEntry 16 } wfOsiCircuitFragmentedPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of pdus that had to be fragmented when forwarded out this circuit." ::= { wfOsiCircuitEntry 17 } wfOsiCircuitCongestionDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of PDUs dropped because of congestion." ::= { wfOsiCircuitEntry 18 } wfOsiCircuitAddrUnreachDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of PDUs dropped because the destination is unreachable." ::= { wfOsiCircuitEntry 19 } wfOsiCircuitAgedPduDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of PDUs dropped because of aging." ::= { wfOsiCircuitEntry 20 } wfOsiCircuitPduFormatErrDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of PDUs dropped because of Format Error." ::= { wfOsiCircuitEntry 21 } wfOsiCircuitUnsuppOptsDiscards OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of PDUs dropped because they contain unsupported options." ::= { wfOsiCircuitEntry 22 } wfOsiCircuitSentErrorReports OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of error reports sent out this circuit." ::= { wfOsiCircuitEntry 23 } wfOsiCircuitReceivedControlPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of ESIS or ISIS PDUs received on this circuit." ::= { wfOsiCircuitEntry 24 } wfOsiCircuitSentControlPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of ESIS or ISIS PDUs sent out this circuit." ::= { wfOsiCircuitEntry 25 } wfOsiCircuitStateChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times the circuit goes from down to up or from up to down." ::= { wfOsiCircuitEntry 26 } wfOsiCircuitAdjStateChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times an adjacency off of this circuit goes from down to up or from up to down state." ::= { wfOsiCircuitEntry 27 } wfOsiCircuitInitFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times this circuit fails to initialize." ::= { wfOsiCircuitEntry 28 } wfOsiCircuitRejectedAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Adjacencies that were rejected on this circuit." ::= { wfOsiCircuitEntry 29 } wfOsiCircuitReceivedBadLsps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bad Lsps received on this circuit." ::= { wfOsiCircuitEntry 30 } wfOsiCircuitReceivedBadSnps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of BAD Sequence Number Pdus received on this circuit." ::= { wfOsiCircuitEntry 31 } wfOsiCircuitReceivedBadEshs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bad ESHs received on this circuit." ::= { wfOsiCircuitEntry 32 } wfOsiCircuitReceivedBadL1Iihs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bad L1 IIHs received on this circuit." ::= { wfOsiCircuitEntry 33 } wfOsiCircuitReceivedBadL2Iihs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bad L2 IIHs received on this circuit." ::= { wfOsiCircuitEntry 34 } wfOsiCircuitL1DrChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times the L1 Designated Router has been elected on this circuit." ::= { wfOsiCircuitEntry 35 } wfOsiCircuitL2DrChanges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of times the L2 Designated Router has been elected on this circuit." ::= { wfOsiCircuitEntry 36 } wfOsiCircuitClnpForwarding OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This shows whether forwarding is enabled over this circuit." ::= { wfOsiCircuitEntry 37 } wfOsiCircuitClnpDefaultLifeTime OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the lifetime included in clnp pdus generated by this router (i.e. echo and echo reply pdus, error report pdus)." ::= { wfOsiCircuitEntry 38 } wfOsiCircuitClnpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP pdus received from this circuit." ::= { wfOsiCircuitEntry 39 } wfOsiCircuitClnpInAddrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP pdus recived from this circuit with Address format errors." ::= { wfOsiCircuitEntry 40 } wfOsiCircuitClnpForwPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Clnp PDUs received on this circuit that are forwarded." ::= { wfOsiCircuitEntry 41 } wfOsiCircuitClnpInUnknownNlps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Clnp PDUs received on this circuit where the network layer addressed is unknown (Bad NLPID)." ::= { wfOsiCircuitEntry 42 } wfOsiCircuitClnpInDelivers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Clnp PDUs received on this circuit whose destination is this router." ::= { wfOsiCircuitEntry 43 } wfOsiCircuitClnpInUnknownUlps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is number of Clnp PDUs received on this circuit addressed to this router where the upper layer is unknown." ::= { wfOsiCircuitEntry 44 } wfOsiCircuitClnpSegCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP segments created from pdus received on this circuit." ::= { wfOsiCircuitEntry 45 } wfOsiCircuitClnpInOpts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP pdus received with an options portion." ::= { wfOsiCircuitEntry 46 } wfOsiCircuitClnpOutOpts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP pdus sent with an options portion." ::= { wfOsiCircuitEntry 47 } wfOsiCircuitEsisEshIns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of ESHs received from this circuit." ::= { wfOsiCircuitEntry 48 } wfOsiCircuitEsisIshOuts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of ISHs sent out this circuit." ::= { wfOsiCircuitEntry 49 } wfOsiCircuitEsisRduOuts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Redirects sent out this circuit." ::= { wfOsiCircuitEntry 50 } wfOsiCircuitL1DesignatedRouter OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the L1 Designated Router on this circuit." ::= { wfOsiCircuitEntry 51 } wfOsiCircuitL2DesignatedRouter OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the L2 Designated Router on this circuit." ::= { wfOsiCircuitEntry 52 } wfOsiCircuitClnpOutEchoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP Echo Replies sent out this circuit." ::= { wfOsiCircuitEntry 53 } wfOsiCircuitClnpOutEchoRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Clnp Echo Requests sent out this circuit." ::= { wfOsiCircuitEntry 54 } wfOsiCircuitClnpInEchoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP Echo Replies received on this circuit." ::= { wfOsiCircuitEntry 55 } wfOsiCircuitClnpInEchoRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of CLNP Echo Requests recived on this circuit." ::= { wfOsiCircuitEntry 56 } wfOsiCircuitNumDynEsAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Dynamic End System Adjacencies formed on this circuit." ::= { wfOsiCircuitEntry 57 } wfOsiCircuitNumDynL1Adjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Dynamic Level 1 Intermediate System Adjacencies formed on this circuit. " ::= { wfOsiCircuitEntry 58 } wfOsiCircuitNumDynL2Adjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Dynamic Level 2 Intermediate System Adjacencies formed on this circuit." ::= { wfOsiCircuitEntry 59 } wfOsiCircuitNumDynPtpIsAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Dynamic Intermediate System Point-to-Point Adjacencies formed on this circuit." ::= { wfOsiCircuitEntry 60 } wfOsiCircuitNumDynPtpEsAdjs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of Dynamic End System Point-to-Point Adjaciences formed on this circuit." ::= { wfOsiCircuitEntry 61 } wfOsiCircuitBadIshReceived OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of bad Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point circuits." ::= { wfOsiCircuitEntry 62 } wfOsiCircuitEsisIshIns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This is the number of good Intermediate System Hellos received on this circuit. These will only be received on Point-to-Point circuits." ::= { wfOsiCircuitEntry 63 } wfOsiCircuitIihHoldMultiplier OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier." DEFVAL { 3 } ::= { wfOsiCircuitEntry 64 } wfOsiCircuitIshHoldMultiplier OBJECT-TYPE SYNTAX INTEGER(1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier." DEFVAL { 3 } ::= { wfOsiCircuitEntry 65 } wfOsiCircuitDisableRedirect OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allow Redirects to be disabled. This is required when operating over Frame Relay in group mode in a partial mesh topology." DEFVAL { enabled } ::= { wfOsiCircuitEntry 66 } wfOsiExternalAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiExternalAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table of External Addresses for this Router." ::= { wfOsiGroup 4 } wfOsiExternalAddressEntry OBJECT-TYPE SYNTAX WfOsiExternalAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the External Address Record for this Router." INDEX { wfOsiExtAddrCircuit, wfOsiExtAddr } ::= { wfOsiExternalAddressTable 1 } WfOsiExternalAddressEntry ::= SEQUENCE { wfOsiExtAddrDelete INTEGER, wfOsiExtAddrDisable INTEGER, wfOsiExtAddr OCTET STRING, wfOsiExtAddrCircuit INTEGER, wfOsiExtAddrNibbleLength INTEGER, wfOsiExtAddrSnpa OCTET STRING, wfOsiExtAddrCost INTEGER } wfOsiExtAddrDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the Create/Delete parameter for this ExtAddr entry." DEFVAL { created } ::= { wfOsiExternalAddressEntry 1 } wfOsiExtAddrDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for this ExtAddr." DEFVAL { enabled } ::= { wfOsiExternalAddressEntry 2 } wfOsiExtAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (20)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the prefix external address. It is also the inst_id." ::= { wfOsiExternalAddressEntry 3 } wfOsiExtAddrCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the circuit to go out for this adj." ::= { wfOsiExternalAddressEntry 4 } wfOsiExtAddrNibbleLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is the length in nibbles of the external address." ::= { wfOsiExternalAddressEntry 5 } wfOsiExtAddrSnpa OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This is the SNPA of the neighbor on this circuit." ::= { wfOsiExternalAddressEntry 6 } wfOsiExtAddrCost OBJECT-TYPE SYNTAX INTEGER(1..63) ACCESS read-write STATUS mandatory DESCRIPTION "This is the external metric cost to this address." DEFVAL { 20 } ::= { wfOsiExternalAddressEntry 7 } wfOsiStaticEsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiStaticEsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the Static ES Table for this router." ::= { wfOsiGroup 5 } wfOsiStaticEsEntry OBJECT-TYPE SYNTAX WfOsiStaticEsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the Static ES entry for the Static ES Table." INDEX { wfOsiStaticEsCircuit, wfOsiStaticEsId } ::= { wfOsiStaticEsTable 1 } WfOsiStaticEsEntry ::= SEQUENCE { wfOsiStaticEsDelete INTEGER, wfOsiStaticEsDisable INTEGER, wfOsiStaticEsId OCTET STRING, wfOsiStaticEsCircuit INTEGER, wfOsiStaticEsSnpa OCTET STRING } wfOsiStaticEsDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the Create/Delete parameter for this Static ES entry." DEFVAL { created } ::= { wfOsiStaticEsEntry 1 } wfOsiStaticEsDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for this Static ES." DEFVAL { enabled } ::= { wfOsiStaticEsEntry 2 } wfOsiStaticEsId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the ESID of the neighbor." ::= { wfOsiStaticEsEntry 3 } wfOsiStaticEsCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the circuit to go out for this adj." ::= { wfOsiStaticEsEntry 4 } wfOsiStaticEsSnpa OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This is the SNPA of the neighbor on this circuit." ::= { wfOsiStaticEsEntry 5 } wfOsiTrafficFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiTrafficFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "OSI Traffic Filters" ::= { wfOsiGroup 6 } wfOsiTrafficFilterEntry OBJECT-TYPE SYNTAX WfOsiTrafficFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A traffic filter definition" INDEX { wfOsiTrafficFilterCircuit, wfOsiTrafficFilterRuleNumber, wfOsiTrafficFilterFragment } ::= { wfOsiTrafficFilterTable 1 } WfOsiTrafficFilterEntry ::= SEQUENCE { wfOsiTrafficFilterDelete INTEGER, wfOsiTrafficFilterDisable INTEGER, wfOsiTrafficFilterStatus INTEGER, wfOsiTrafficFilterCounter Counter, wfOsiTrafficFilterDefinition Opaque, wfOsiTrafficFilterReserved INTEGER, wfOsiTrafficFilterCircuit INTEGER, wfOsiTrafficFilterRuleNumber INTEGER, wfOsiTrafficFilterFragment INTEGER, wfOsiTrafficFilterName DisplayString } wfOsiTrafficFilterDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted." DEFVAL { created } ::= { wfOsiTrafficFilterEntry 1 } wfOsiTrafficFilterDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule." DEFVAL { enabled } ::= { wfOsiTrafficFilterEntry 2 } wfOsiTrafficFilterStatus OBJECT-TYPE SYNTAX INTEGER { active(1), error(2), inactive(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule." DEFVAL { inactive } ::= { wfOsiTrafficFilterEntry 3 } wfOsiTrafficFilterCounter OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of received packets that have matched this rule." ::= { wfOsiTrafficFilterEntry 4 } wfOsiTrafficFilterDefinition OBJECT-TYPE SYNTAX Opaque ACCESS read-write STATUS mandatory DESCRIPTION "The filter rule definition." ::= { wfOsiTrafficFilterEntry 5 } wfOsiTrafficFilterReserved OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reserved field." ::= { wfOsiTrafficFilterEntry 6 } wfOsiTrafficFilterCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the Circuit to which the filter is applied." ::= { wfOsiTrafficFilterEntry 7 } wfOsiTrafficFilterRuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ID for the rule." ::= { wfOsiTrafficFilterEntry 8 } wfOsiTrafficFilterFragment OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fragment number - for large rules." ::= { wfOsiTrafficFilterEntry 9 } wfOsiTrafficFilterName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of the rule number" ::= { wfOsiTrafficFilterEntry 10 } wfOsiL1LspHdrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiL1LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2 u_int32's so the inst_id len is 2." ::= { wfOsiGroup 7 } wfOsiL1LspHdrEntry OBJECT-TYPE SYNTAX WfOsiL1LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Record in the Level 1 Lsp Header Table" INDEX { wfOsiL1LspHdrLspId } ::= { wfOsiL1LspHdrTable 1 } WfOsiL1LspHdrEntry ::= SEQUENCE { wfOsiL1LspHdrLspId OCTET STRING, wfOsiL1LspHdrLifetime INTEGER, wfOsiL1LspHdrSeqnum INTEGER, wfOsiL1LspHdrFlags OCTET STRING, wfOsiL1LspHdrCksum OCTET STRING } wfOsiL1LspHdrLspId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "LSPID = Source ID + Pseudo-node ID + LSP number" ::= { wfOsiL1LspHdrEntry 1 } wfOsiL1LspHdrLifetime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp Lifetime" ::= { wfOsiL1LspHdrEntry 2 } wfOsiL1LspHdrSeqnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp sequence number" ::= { wfOsiL1LspHdrEntry 3 } wfOsiL1LspHdrFlags OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Flags: P/ATT/LSPDBOL/IS type" ::= { wfOsiL1LspHdrEntry 4 } wfOsiL1LspHdrCksum OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Checksum" ::= { wfOsiL1LspHdrEntry 5 } wfOsiL2LspHdrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiL2LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "2 u_int32's so the inst_id len is 2." ::= { wfOsiGroup 8 } wfOsiL2LspHdrEntry OBJECT-TYPE SYNTAX WfOsiL2LspHdrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A Record in the Lsp Header Table" INDEX { wfOsiL2LspHdrLspId } ::= { wfOsiL2LspHdrTable 1 } WfOsiL2LspHdrEntry ::= SEQUENCE { wfOsiL2LspHdrLspId OCTET STRING, wfOsiL2LspHdrLifetime INTEGER, wfOsiL2LspHdrSeqnum INTEGER, wfOsiL2LspHdrFlags OCTET STRING, wfOsiL2LspHdrCksum OCTET STRING } wfOsiL2LspHdrLspId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "LSPID = Source ID + Pseudo-node ID + LSP number" ::= { wfOsiL2LspHdrEntry 1 } wfOsiL2LspHdrLifetime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp Lifetime" ::= { wfOsiL2LspHdrEntry 2 } wfOsiL2LspHdrSeqnum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Lsp sequence number" ::= { wfOsiL2LspHdrEntry 3 } wfOsiL2LspHdrFlags OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Flags: P/ATT/LSPDBOL/IS type" ::= { wfOsiL2LspHdrEntry 4 } wfOsiL2LspHdrCksum OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Checksum" ::= { wfOsiL2LspHdrEntry 5 } wfOsiDynAdjTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiDynAdjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Dynamic Adjacency Table" ::= { wfOsiGroup 9 } wfOsiDynAdjEntry OBJECT-TYPE SYNTAX WfOsiDynAdjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Adjacency Table - the real index is the adjacency id" INDEX { wfOsiDynAdjId } ::= { wfOsiDynAdjTable 1 } WfOsiDynAdjEntry ::= SEQUENCE { wfOsiDynAdjId INTEGER, wfOsiDynAdjDatabase INTEGER, wfOsiDynAdjType INTEGER, wfOsiDynAdjState INTEGER, wfOsiDynAdjCircuitId INTEGER, wfOsiDynAdjHoldTime INTEGER, wfOsiDynAdjPriority INTEGER, wfOsiDynAdjSnpaAddr OCTET STRING, wfOsiDynAdjNsapAddr OCTET STRING, wfOsiDynAdjLanId OCTET STRING } wfOsiDynAdjId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index in the Adjacency Table" ::= { wfOsiDynAdjEntry 1 } wfOsiDynAdjDatabase OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Database into which the Adjacency is stored, 1=ES, 2=Level 1 IS, 3=Level 2 IS." ::= { wfOsiDynAdjEntry 2 } wfOsiDynAdjType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The type of adjacency. (see Osi_const.h)" ::= { wfOsiDynAdjEntry 3 } wfOsiDynAdjState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The state of the adjacency. INITIALIZING, UP or FAILED" ::= { wfOsiDynAdjEntry 4 } wfOsiDynAdjCircuitId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each known circuit." ::= { wfOsiDynAdjEntry 5 } wfOsiDynAdjHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hold Time received from neighbor." ::= { wfOsiDynAdjEntry 6 } wfOsiDynAdjPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Priority to become designated router. IS only." ::= { wfOsiDynAdjEntry 7 } wfOsiDynAdjSnpaAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "SNAP address for neighbor." ::= { wfOsiDynAdjEntry 8 } wfOsiDynAdjNsapAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Neighbor address (NSAP)." ::= { wfOsiDynAdjEntry 9 } wfOsiDynAdjLanId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "LAN ID from Designated Router. IS only." ::= { wfOsiDynAdjEntry 10 } wfOsiL1RoutesTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiL1RouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the L1 Routes Table for this router." ::= { wfOsiGroup 10 } wfOsiL1RouteEntry OBJECT-TYPE SYNTAX WfOsiL1RouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the L1 Route entry for the Routes Table." INDEX { wfOsiL1RouteType, wfOsiL1RoutePathSplit, wfOsiL1RouteId } ::= { wfOsiL1RoutesTable 1 } WfOsiL1RouteEntry ::= SEQUENCE { wfOsiL1RouteId OCTET STRING, wfOsiL1RoutePathSplit INTEGER, wfOsiL1RouteType INTEGER, wfOsiL1RouteNextHopSnpa OCTET STRING, wfOsiL1RouteNextHopId OCTET STRING, wfOsiL1RouteNextHopType INTEGER, wfOsiL1RouteNextHopCircuit INTEGER, wfOsiL1RouteDefaultMetricCost INTEGER } wfOsiL1RouteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the SysID of the L1 Destination." ::= { wfOsiL1RouteEntry 1 } wfOsiL1RoutePathSplit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This assigns a number to each equal cost path to the destination. There can be up to 2 equal cost paths to a destination." ::= { wfOsiL1RouteEntry 2 } wfOsiL1RouteType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This tells what kind of a route this entry is." ::= { wfOsiL1RouteEntry 3 } wfOsiL1RouteNextHopSnpa OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the SNPA of the next hop adj for this route." ::= { wfOsiL1RouteEntry 4 } wfOsiL1RouteNextHopId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the next hop adjacency to this route. If its just an ES then it is the 6byte System ID. If the next HOP is an IS then it is the NET. " ::= { wfOsiL1RouteEntry 5 } wfOsiL1RouteNextHopType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the adj type of the next hop for this route." ::= { wfOsiL1RouteEntry 6 } wfOsiL1RouteNextHopCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the circuit to forward out for this route." ::= { wfOsiL1RouteEntry 7 } wfOsiL1RouteDefaultMetricCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the cost to from this system to this destination." ::= { wfOsiL1RouteEntry 8 } wfOsiL2RoutesTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiL2RouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the L2 Routes Table for this router." ::= { wfOsiGroup 11 } wfOsiL2RouteEntry OBJECT-TYPE SYNTAX WfOsiL2RouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the L2 Route entry for the Routes Table." INDEX { wfOsiL2RouteType, wfOsiL2RoutePathSplit, wfOsiL2RouteId } ::= { wfOsiL2RoutesTable 1 } WfOsiL2RouteEntry ::= SEQUENCE { wfOsiL2RouteId OCTET STRING, wfOsiL2RoutePathSplit INTEGER, wfOsiL2RouteType INTEGER, wfOsiL2RouteNextHopSnpa OCTET STRING, wfOsiL2RouteNextHopId OCTET STRING, wfOsiL2RouteNextHopType INTEGER, wfOsiL2RouteNextHopCircuit INTEGER, wfOsiL2RouteDefaultMetricCost INTEGER } wfOsiL2RouteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (13)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the SysID of the L2 Destination." ::= { wfOsiL2RouteEntry 1 } wfOsiL2RoutePathSplit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This assigns a number to each equal cost path to the destination. There can be up to 2 equal cost paths to a destination." ::= { wfOsiL2RouteEntry 2 } wfOsiL2RouteType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This tells what kind of a route this entry is." ::= { wfOsiL2RouteEntry 3 } wfOsiL2RouteNextHopSnpa OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the SNPA of the neighbor on this circuit." ::= { wfOsiL2RouteEntry 4 } wfOsiL2RouteNextHopId OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the ID of the next hop adjacency to this route. If its just an ES then it is the 6byte System ID. If the next HOP is an IS then it is the NET. " ::= { wfOsiL2RouteEntry 5 } wfOsiL2RouteNextHopType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the adj type of the next hop for this route." ::= { wfOsiL2RouteEntry 6 } wfOsiL2RouteNextHopCircuit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the circuit to go out for this adj." ::= { wfOsiL2RouteEntry 7 } wfOsiL2RouteDefaultMetricCost OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the cost to from this system to this destination." ::= { wfOsiL2RouteEntry 8 } wfOsiDecnetTrans OBJECT IDENTIFIER ::= { wfOsiGroup 12 } wfOsiDecnetTransDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether DECnet Phase 4 to Phase 5 Transition functions are configured." DEFVAL { created } ::= { wfOsiDecnetTrans 1 } wfOsiDecnetTransDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether DECnet Phase 4 to Phase 5 Transition functions are enabled." DEFVAL { enabled } ::= { wfOsiDecnetTrans 2 } wfOsiDecnetTransState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value displays the state of the DECnet Phase 4 to Phase 5 Transition function." DEFVAL { notpresent } ::= { wfOsiDecnetTrans 3 } wfOsiDecnetTransPhase4Pkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of successfully translated Phase 4 packets" ::= { wfOsiDecnetTrans 4 } wfOsiDecnetTransSegFail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times Phase 5 translation failed because the packet was segmented." ::= { wfOsiDecnetTrans 5 } wfOsiDecnetTransNselFail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times Phase 5 translation failed because the NSELs were not the same." ::= { wfOsiDecnetTrans 6 } wfOsiDecnetTransUnrFail OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times Phase 5 failed to find a route to the destination." ::= { wfOsiDecnetTrans 7 } wfOsiDecnetTransNumPhase4Es OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Phase 4 ES Adjacencies announced by the Phase 4 (DECnet IV) router." ::= { wfOsiDecnetTrans 8 } wfOsiAreaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiAreaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the table of Area Addresses for this Router." ::= { wfOsiGroup 13 } wfOsiAreaAddressEntry OBJECT-TYPE SYNTAX WfOsiAreaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the Area Address Record for this Router." INDEX { wfOsiAreaAddress } ::= { wfOsiAreaAddressTable 1 } WfOsiAreaAddressEntry ::= SEQUENCE { wfOsiAreaAddrDelete INTEGER, wfOsiAreaAddrDisable INTEGER, wfOsiAreaAddress OCTET STRING } wfOsiAreaAddrDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This is the Create/Delete parameter for this AreaAddr entry." DEFVAL { created } ::= { wfOsiAreaAddressEntry 1 } wfOsiAreaAddrDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable parameter for this AreaAddr." DEFVAL { enabled } ::= { wfOsiAreaAddressEntry 2 } wfOsiAreaAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "This is the prefix area address. It is also the inst_id." ::= { wfOsiAreaAddressEntry 3 } wfOsiTarpEntry OBJECT IDENTIFIER ::= { wfOsiGroup 14 } wfOsiTarpCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether OSI Tarp is configured on this slot." DEFVAL { created } ::= { wfOsiTarpEntry 1 } wfOsiTarpEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value dtermines if OSI Tarp is to startup." DEFVAL { enabled } ::= { wfOsiTarpEntry 2 } wfOsiTarpState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value describes the state of OSI Tarp." DEFVAL { notpresent } ::= { wfOsiTarpEntry 3 } wfOsiTarpTID OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This value contains the Target Identifier assigned to the router (Network Entity)." ::= { wfOsiTarpEntry 4 } wfOsiTarpOriginate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if TARP is allowed to originate any tarp requests." DEFVAL { enabled } ::= { wfOsiTarpEntry 5 } wfOsiTarpLifetime OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This value determines what the lifetime of of TARP packets originated by this router will be." DEFVAL { 25 } ::= { wfOsiTarpEntry 6 } wfOsiTarpStartSeq OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This value determines what the starting sequence number of TARP packets originated by this router will be." DEFVAL { 1 } ::= { wfOsiTarpEntry 7 } wfOsiTarpNextSeq OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value determines what the next sequence number of TARP packets originated by this router will be." ::= { wfOsiTarpEntry 8 } wfOsiTarpTarPro OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This value describes what the Protocol Address Type field within the TARP packet must be. A value of 'FE' describes a CLNP address type." ::= { wfOsiTarpEntry 9 } wfOsiTarpTDC OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether or not TARP uses and maintains a Tarp Data Cache." DEFVAL { enabled } ::= { wfOsiTarpEntry 10 } wfOsiTarpL2TDC OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether or not TARP uses and maintains a Level 2 Tarp Data Cache." DEFVAL { enabled } ::= { wfOsiTarpEntry 11 } wfOsiTarpT1 OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This value configures the Tarp T1 Timer - how many seconds to wait for a response to a Type1 Request PDU." DEFVAL { 15 } ::= { wfOsiTarpEntry 12 } wfOsiTarpT2 OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This value configures the Tarp T2 Timer - how many seconds to wait for a response to a Type2 Request PDU." DEFVAL { 25 } ::= { wfOsiTarpEntry 13 } wfOsiTarpT3 OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This value configures the Tarp T3 Timer - how many seconds to wait for a response to a Type5 Request PDU." DEFVAL { 40 } ::= { wfOsiTarpEntry 14 } wfOsiTarpT4 OBJECT-TYPE SYNTAX INTEGER(1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "This value configures the Tarp T4 Timer, which is used during the Error Recovery process after T2 expires." DEFVAL { 20 } ::= { wfOsiTarpEntry 15 } wfOsiTarpLDBTimer OBJECT-TYPE SYNTAX INTEGER(1..600) ACCESS read-write STATUS mandatory DESCRIPTION "This value configures the Loop Detection Buffer's Entry Timer." DEFVAL { 300 } ::= { wfOsiTarpEntry 16 } wfOsiTarpLDBFlush OBJECT-TYPE SYNTAX INTEGER(1..86400) ACCESS read-write STATUS mandatory DESCRIPTION "This value configures the timer that signals the flushing of the Loop Detection Buffer." DEFVAL { 300 } ::= { wfOsiTarpEntry 17 } wfOsiTarpLDBSize OBJECT-TYPE SYNTAX INTEGER(1..5000) ACCESS read-write STATUS mandatory DESCRIPTION "This value specifies the maximum number of entries the the Loop Detection Buffer can hold." DEFVAL { 50 } ::= { wfOsiTarpEntry 18 } wfOsiTarpType1Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 1 Tarp packets received by this interface." ::= { wfOsiTarpEntry 19 } wfOsiTarpType1Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 1 Tarp packets transmitted by this interface." ::= { wfOsiTarpEntry 20 } wfOsiTarpType2Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 2 Tarp packets received by this interface." ::= { wfOsiTarpEntry 21 } wfOsiTarpType2Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 2 Tarp packets transmitted by this interface." ::= { wfOsiTarpEntry 22 } wfOsiTarpType3Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 3 Tarp packets received by this interface." ::= { wfOsiTarpEntry 23 } wfOsiTarpType3Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 3 Tarp packets transmitted by this interface." ::= { wfOsiTarpEntry 24 } wfOsiTarpType4Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 4 Tarp packets received by this interface." ::= { wfOsiTarpEntry 25 } wfOsiTarpType4Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 4 Tarp packets transmitted by this interface." ::= { wfOsiTarpEntry 26 } wfOsiTarpType5Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 5 Tarp packets received by this interface." ::= { wfOsiTarpEntry 27 } wfOsiTarpType5Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 5 Tarp packets transmitted by this interface." ::= { wfOsiTarpEntry 28 } wfOsiTarpCircuitTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiTarpCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all of the Tarp interfaces for this system." ::= { wfOsiGroup 15 } wfOsiTarpCircuitEntry OBJECT-TYPE SYNTAX WfOsiTarpCircuitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the Tarp Interface Entry for the Tarp Interface Table." INDEX { wfOsiTarpCircuitCct } ::= { wfOsiTarpCircuitTable 1 } WfOsiTarpCircuitEntry ::= SEQUENCE { wfOsiTarpCircuitCreate INTEGER, wfOsiTarpCircuitEnable INTEGER, wfOsiTarpCircuitState INTEGER, wfOsiTarpCircuitCct INTEGER, wfOsiTarpCircuitPropagate INTEGER, wfOsiTarpCircuitOriginate INTEGER, wfOsiTarpCircuitType1Rcv Counter, wfOsiTarpCircuitType1Xmt Counter, wfOsiTarpCircuitType2Rcv Counter, wfOsiTarpCircuitType2Xmt Counter, wfOsiTarpCircuitType3Rcv Counter, wfOsiTarpCircuitType3Xmt Counter, wfOsiTarpCircuitType4Rcv Counter, wfOsiTarpCircuitType4Xmt Counter, wfOsiTarpCircuitType5Rcv Counter, wfOsiTarpCircuitType5Xmt Counter, wfOsiTarpCircuitNoBufs Counter } wfOsiTarpCircuitCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if the Tarp Interface is to be created for this OSI interface." DEFVAL { created } ::= { wfOsiTarpCircuitEntry 1 } wfOsiTarpCircuitEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if the Tarp Interface is to be enabled for this OSI interface." DEFVAL { enabled } ::= { wfOsiTarpCircuitEntry 2 } wfOsiTarpCircuitState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This value reflects the state of the Tarp interface." DEFVAL { notpresent } ::= { wfOsiTarpCircuitEntry 3 } wfOsiTarpCircuitCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Circuit number for this Tarp Interface." ::= { wfOsiTarpCircuitEntry 4 } wfOsiTarpCircuitPropagate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if this interface will propagate transit Tarp packets out this interface." DEFVAL { enabled } ::= { wfOsiTarpCircuitEntry 5 } wfOsiTarpCircuitOriginate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if this interface will send out Tarp packets originated by the router." DEFVAL { enabled } ::= { wfOsiTarpCircuitEntry 6 } wfOsiTarpCircuitType1Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 1 Tarp packets received by this interface." ::= { wfOsiTarpCircuitEntry 7 } wfOsiTarpCircuitType1Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 1 Tarp packets transmitted by this interface." ::= { wfOsiTarpCircuitEntry 8 } wfOsiTarpCircuitType2Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 2 Tarp packets received by this interface." ::= { wfOsiTarpCircuitEntry 9 } wfOsiTarpCircuitType2Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 2 Tarp packets transmitted by this interface." ::= { wfOsiTarpCircuitEntry 10 } wfOsiTarpCircuitType3Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 3 Tarp packets received by this interface." ::= { wfOsiTarpCircuitEntry 11 } wfOsiTarpCircuitType3Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 3 Tarp packets transmitted by this interface." ::= { wfOsiTarpCircuitEntry 12 } wfOsiTarpCircuitType4Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 4 Tarp packets received by this interface." ::= { wfOsiTarpCircuitEntry 13 } wfOsiTarpCircuitType4Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 4 Tarp packets transmitted by this interface." ::= { wfOsiTarpCircuitEntry 14 } wfOsiTarpCircuitType5Rcv OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 5 Tarp packets received by this interface." ::= { wfOsiTarpCircuitEntry 15 } wfOsiTarpCircuitType5Xmt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value counts the number of Type 5 Tarp packets transmitted by this interface." ::= { wfOsiTarpCircuitEntry 16 } wfOsiTarpCircuitNoBufs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This value represents the number of times Tarp tried to allocate a buffer but was unable." ::= { wfOsiTarpCircuitEntry 17 } wfOsiTarpLDBTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiTarpLDBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of wfOsiTarpLDBEntry's." ::= { wfOsiGroup 16 } wfOsiTarpLDBEntry OBJECT-TYPE SYNTAX WfOsiTarpLDBEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry in the Loop Detection Buffer." INDEX { wfOsiTarpLDBNSAP } ::= { wfOsiTarpLDBTable 1 } WfOsiTarpLDBEntry ::= SEQUENCE { wfOsiTarpLDBCreate INTEGER, wfOsiTarpLDBNSAP OCTET STRING, wfOsiTarpLDBSequence INTEGER, wfOsiTarpLDBCurrentTimer INTEGER } wfOsiTarpLDBCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the creation or deletion of the instance." ::= { wfOsiTarpLDBEntry 1 } wfOsiTarpLDBNSAP OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The NSAP address for this entry." ::= { wfOsiTarpLDBEntry 2 } wfOsiTarpLDBSequence OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The sequence number for this LDB entry." ::= { wfOsiTarpLDBEntry 3 } wfOsiTarpLDBCurrentTimer OBJECT-TYPE SYNTAX INTEGER(1..600) ACCESS read-write STATUS mandatory DESCRIPTION "Current timer for this LDB Entry." DEFVAL { 300 } ::= { wfOsiTarpLDBEntry 4 } wfOsiTarpStaticAdjTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiTarpStaticAdjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of wfOsiTarpStaticAdjEntry's." ::= { wfOsiGroup 17 } wfOsiTarpStaticAdjEntry OBJECT-TYPE SYNTAX WfOsiTarpStaticAdjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the static adjacency record that appears in the adjacency table." INDEX { wfOsiTarpStaticAdjNSAP } ::= { wfOsiTarpStaticAdjTable 1 } WfOsiTarpStaticAdjEntry ::= SEQUENCE { wfOsiTarpStaticAdjCreate INTEGER, wfOsiTarpStaticAdjEnable INTEGER, wfOsiTarpStaticAdjNSAP OCTET STRING, wfOsiTarpStaticNibbleLength INTEGER } wfOsiTarpStaticAdjCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if this instance should be created or deleted." DEFVAL { created } ::= { wfOsiTarpStaticAdjEntry 1 } wfOsiTarpStaticAdjEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if the Static Adjacency should be enabled." DEFVAL { enabled } ::= { wfOsiTarpStaticAdjEntry 2 } wfOsiTarpStaticAdjNSAP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (20)) ACCESS read-only STATUS mandatory DESCRIPTION "This specifies the address of the Static Adjacency. It is also the instance ID." ::= { wfOsiTarpStaticAdjEntry 3 } wfOsiTarpStaticNibbleLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Describes the number of nibbles in the Static NSAP Address." ::= { wfOsiTarpStaticAdjEntry 4 } wfOsiTarpIgnoreAdjTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOsiTarpIgnoreAdjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains all the adjacency entries that should be ignored." ::= { wfOsiGroup 18 } wfOsiTarpIgnoreAdjEntry OBJECT-TYPE SYNTAX WfOsiTarpIgnoreAdjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the ignore static route entry for the wfOsiTarpIgnoreAdj table." INDEX { wfOsiTarpIgnoreAdjNSAP } ::= { wfOsiTarpIgnoreAdjTable 1 } WfOsiTarpIgnoreAdjEntry ::= SEQUENCE { wfOsiTarpIgnoreAdjCreate INTEGER, wfOsiTarpIgnoreAdjEnable INTEGER, wfOsiTarpIgnoreAdjNSAP OCTET STRING, wfOsiTarpIgnoreNibbleLength INTEGER } wfOsiTarpIgnoreAdjCreate OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Signifies this instance should be created." DEFVAL { created } ::= { wfOsiTarpIgnoreAdjEntry 1 } wfOsiTarpIgnoreAdjEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines if this instance should be enabled or disabled." DEFVAL { enabled } ::= { wfOsiTarpIgnoreAdjEntry 2 } wfOsiTarpIgnoreAdjNSAP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (20)) ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the OSI Adjacency that should be ignored." ::= { wfOsiTarpIgnoreAdjEntry 3 } wfOsiTarpIgnoreNibbleLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Describes the number of nibbles in the Static NSAP Address for the Ignore Static Route." ::= { wfOsiTarpIgnoreAdjEntry 4 } END -- Wellfleet-OSI-MIB