Wellfleet-ST2-MIB.mib object view, vendor Wellfleet

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-ST2-MIB and use it to monitor vendor specific OID's.

Wellfleet-ST2-MIB file content

Object view of Wellfleet-ST2-MIB:

Scalar Object
wfSt2BaseDelete	.1.3.6.1.4.1.18.3.5.16.1.2.1.1
This value determines whether ST2 is configured on this slot.
wfSt2BaseDisable	.1.3.6.1.4.1.18.3.5.16.1.2.1.2
This value determines whether ST2 is to startup.
wfSt2BaseState	.1.3.6.1.4.1.18.3.5.16.1.2.1.3
This value records the current state of ST2.
wfSt2BaseRoutingVers	.1.3.6.1.4.1.18.3.5.16.1.2.1.4
'This read-only parameter identifies the executor node's Routing version number. The format is the same as for the Network Management version number.'
wfSt2BaseTunnelCapability	.1.3.6.1.4.1.18.3.5.16.1.2.1.5
This is the tunnelling capability flag for the router.
wfSt2BaseTunnelDisable	.1.3.6.1.4.1.18.3.5.16.1.2.1.6
This is the tunnelling enabled flag for the router.
wfSt2BaseAgentDBGMask	.1.3.6.1.4.1.18.3.5.16.1.2.1.7
This is the ST2 base agent debug mask.
wfSt2BaseReservedParameter1	.1.3.6.1.4.1.18.3.5.16.1.2.1.8
This is the ST2 base reserved parameter.
wfSt2BaseReservedParameter2	.1.3.6.1.4.1.18.3.5.16.1.2.1.9
This is the ST2 base reserved parameter.
wfSt2CircuitEntry	.1.3.6.1.4.1.18.3.5.16.1.2.2.1
'Parameters information about all circuits currently known. NOTE: depending on the type of object being querried (e.g., a level 1 vs. a level 2 router or end system) some variables may not be present.'
wfSt2NeighborEntry	.1.3.6.1.4.1.18.3.5.16.1.2.3.1
Neighbor Table
Tabular Object
wfSt2CircuitID	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.4
A unique value for each known circuit.
wfSt2CircuitDelete	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.1
This value determines whether the circuit is configured
wfSt2CircuitDisable	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.2
'This value represents the circuit's Network Management operational state. NOTE: These values are incremented by one compared to the standard St2 values in order to maintain compliance with RFC 1155.'
wfSt2CircuitCommonState	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.3
This value represents the circuit's operational state.
wfSt2CircuitCommonType	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.5
'Represents the type of the circuit.'
wfSt2CircuitIPAddress	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.6
Network Interface IP address of this ST2 circuit
wfSt2CircuitTmoAccept	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.7
Transmit accept ...
wfSt2CircuitRetryAccept	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.8
Receive accept ...
wfSt2CircuitTmoConnect	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.9
Transmit connect ...
wfSt2CircuitRetryConnect	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.10
Receive connect ...
wfSt2CircuitTmoDisconnect	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.11
Transmit disconnect ...
wfSt2CircuitRetryDisconnect	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.12
Receive disconnect ...
wfSt2CircuitTmoHidChange	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.13
Transmit hid change ...
wfSt2CircuitRetryHidChange	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.14
Receive Hid Change ...
wfSt2CircuitTmoRefuse	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.15
Transmit refuse ...
wfSt2CircuitRetryRefuse	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.16
Receive refuse ...
wfSt2CircuitTmoHello	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.17
Transmit hello ...
wfSt2CircuitRetryHello	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.18
Receive hello ...
wfSt2CircuitMTU	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.19
Maximum transmission unit ...
wfSt2CircuitDBGMask	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.20
Debug mask ...
wfSt2CircuitHelloFailure	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.21
The stream is to be preserved even though helloing fails.
wfSt2CircuitHidProposed	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.22
Hid proposed flag ...
wfSt2CircuitBadStCksum	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.23
Bad St2 checksum ...
wfSt2CircuitEncodeBadParm	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.24
Bad parameter encoding ...
wfSt2CircuitEncodeWrongParms	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.25
Wrong parameter encoded ...
wfSt2CircuitMsgInHidColl	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.26
Message in Hid ...
wfSt2CircuitMsgInNoCon	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.27
Message in No ...
wfSt2CircuitNotSt2	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.28
Not an St2 packet ...
wfSt2CircuitParmMissing	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.29
Circuit parameter missing ...
wfSt2CircuitScmpRefNum	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.30
Number of Scmp refuses ...
wfSt2CircuitScmp0rVlid	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.31
Scmp Or Vlid ...
wfSt2CircuitScmp0sVlid	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.32
Scmp Os Vlid ...
wfSt2CircuitScmpBadVlid	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.33
Bad Scmp Vlid ...
wfSt2CircuitScmpCksum	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.34
Scmp checksun ...
wfSt2CircuitScmpFailedResources	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.35
Scmp recources failed ...
wfSt2CircuitScmpFailedRoute	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.36
Scmp routed failed ...
wfSt2CircuitScmpLenInconsist	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.37
Scmp packet length inconsistent ...
wfSt2CircuitScmpRxTimeOut	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.38
Scmp receive time outs ...
wfSt2CircuitScmpXmtCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.39
Scmp transmit count ...
wfSt2CircuitScmpRcvCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.40
Scmp receive count ...
wfSt2CircuitDataXmtCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.41
Transmited data count ...
wfSt2CircuitDataRcvCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.42
received data count ...
wfSt2CircuitSt2StreamCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.43
St2 stream count ...
wfSt2CircuitHelloXmtCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.44
Hellos transmitted count ...
wfSt2CircuitHelloRcvCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.45
Hellos received count ...
wfSt2CircuitHelloRAckCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.46
Hellos received acknowledged coubt ...
wfSt2CircuitLbPoliceDrop	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.47
Learning bridge police drop count ...
wfSt2CircuitPbsDropCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.48
Pbs drop count ...
wfSt2CircuitOverDrop2Cnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.49
Over drop ? count ...
wfSt2CircuitPktCnt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.50
Circuit packet count ...
wfSt2CircuitScmpXmt	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.51
Scmp packets transmitted ...
wfSt2CircuitScmpRcv	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.52
Scmp packets received ...
wfSt2CircuitBWAlloc	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.53
Circuit bandwith allocated ...
wfSt2CircuitRsvdParameter1	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.54
Circuit reserved parameter
wfSt2CircuitRsvdParameter2	.1.3.6.1.4.1.18.3.5.16.1.2.2.1.55
Circuit reserved parameter
wfSt2NeighborNxtHopIPAddr	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.3
IP address of next hop router
wfSt2NeighborDelete	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.1
Determines whether the base record is configured
wfSt2NeighborDisable	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.2
Determines whether the base record is active
wfSt2NeighborRteExplr	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.4
Is the neighbor capable of route exploration
wfSt2NeighborHelloProtocol	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.5
Helloing in use
wfSt2NeighborType	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.6
Neighbor type, local or tunnel
wfSt2NeighborPriorityLevel	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.7
Route exploration or tunnel priority level
wfSt2NeighborRsvdParameter1	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.8
neighbor reserved parameter
wfSt2NeighborRsvdParameter2	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.9
neighbor reserved parameter
wfSt2NeighborLocalIPAddress	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.10
Network Interface IP address of the local tunnel endpoint
wfSt2NeighborTmoAccept	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.11
Transmit accept ...
wfSt2NeighborRetryAccept	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.12
Receive accept ...
wfSt2NeighborTmoConnect	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.13
Transmit connect ...
wfSt2NeighborRetryConnect	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.14
Receive connect ...
wfSt2NeighborTmoDisconnect	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.15
Transmit disconnect ...
wfSt2NeighborRetryDisconnect	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.16
Receive disconnect ...
wfSt2NeighborTmoHidChange	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.17
Transmit hid change ...
wfSt2NeighborRetryHidChange	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.18
Receive Hid Change ...
wfSt2NeighborTmoRefuse	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.19
Transmit refuse ...
wfSt2NeighborRetryRefuse	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.20
Receive refuse ...
wfSt2NeighborTmoHello	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.21
Transmit hello ...
wfSt2NeighborRetryHello	.1.3.6.1.4.1.18.3.5.16.1.2.3.1.22
Receive hello ...
Table
wfSt2CircuitTable	.1.3.6.1.4.1.18.3.5.16.1.2.2
' Table of ST2 Circuit Configuration and Counter Records'
wfSt2NeighborTable	.1.3.6.1.4.1.18.3.5.16.1.2.3
The ST2 neighbor routing table
Object Identifier
wfSt2Group	.1.3.6.1.4.1.18.3.5.16.1.2
wfSt2BaseGroup	.1.3.6.1.4.1.18.3.5.16.1.2.1