| wfSmdsSwSubEntry |
.1.3.6.1.4.1.18.3.5.9.7.1.1 |
|
Per Wellfleet circuit SMDS Switch configuration
parameters and counters.
This table contains Subscriber-Network Interface (SNI)
parameters and state variables, one entry per SIP port.
|
| wfSmdsSwEndpEntry |
.1.3.6.1.4.1.18.3.5.9.7.2.1 |
|
The parameters for a particular Endpoint.
|
| wfSmdsSwInterfaceEntry |
.1.3.6.1.4.1.18.3.5.9.7.3.1 |
|
This table defines the IP addresses and what
interfaces they are associated with.
|
| wfSmdsSwAssocScrnEntry |
.1.3.6.1.4.1.18.3.5.9.7.4.1 |
|
An SNI index, group and individual screening
list index, and the associated addresses for
the SNI for the address screens.
|
| wfSmdsSwIAScrnEntry |
.1.3.6.1.4.1.18.3.5.9.7.5.1 |
|
An SNI index, a screening list index, the
individual addresses to be screened for the
individual address screen, and whether the screened
address is valid or invalid.
|
| wfSmdsSwGAScrnEntry |
.1.3.6.1.4.1.18.3.5.9.7.6.1 |
|
An SNI index, a screening list index, the group
addresses to be screened for the group address
screen, and whether the screened address is valid
or invalid.
|
| wfSmdsSwGAEntry |
.1.3.6.1.4.1.18.3.5.9.7.7.1 |
|
A Group Address and an address in that group and
whether that association is valid or invalid.
|
| wfSmdsSwCurUsageEntry |
.1.3.6.1.4.1.18.3.5.9.7.8.1 |
|
The usage data for the current usage period
indexed by destination,source address.
|
| wfSmdsSwUsageEnable |
.1.3.6.1.4.1.18.3.5.9.7.9.1 |
|
Enable/Disable SMDS_SW billing.
|
| wfSmdsSwUsageVolume |
.1.3.6.1.4.1.18.3.5.9.7.9.2 |
|
Indicates the file system volume number to which the
billing usage data files will be written. The volume
number corresponds to the slot number on which the
volume resides.
Note: Value 0 has the special meaning that no
'Store' and 'Flush' operations will take
place. This translates to no Billing data
will be written to the local file system.
'Update' operations will still be performed on
each local slot. Full Billing statistics
will still be available in the wfSmdsSwUsageTable
MIB.
|
| wfSmdsSwUsageVolumeBackup |
.1.3.6.1.4.1.18.3.5.9.7.9.3 |
|
Indicates the backup volume if wfSmdsSwUsageVolume
becomes inoperative.
Note: This feature is not implemented in this release.
|
| wfSmdsSwUsageDirectory |
.1.3.6.1.4.1.18.3.5.9.7.9.4 |
|
The name of the directory where the billing usage data
files are stored.
|
| wfSmdsSwUsageFilePrefix |
.1.3.6.1.4.1.18.3.5.9.7.9.5 |
|
The base name of billing usage data files.
|
| wfSmdsSwUsageTimerInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.6 |
|
This number determines the timer interval (number
of seconds) unit for the Billing process to perform
its various timer driven tasks. i.e. updating billing
usage data, writing billing usage data to file system
and file system management activities.
|
| wfSmdsSwUsageUpdateInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.7 |
|
This number specifies the interval (number of minutes)
for the Billing process to collect and update billing
usage data in the wfSmdsSwUsage MIB.
Note: When converted to seconds, this must be a multiple
of wfSmdsSwUsageTimerInterval.
|
| wfSmdsSwUsageStoreInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.8 |
|
This number specifies the interval (number of minutes)
for the Billing process to write billing usage data on
to the file system from the wfSmdsSwUsage MIB.
Note: When converted to seconds, this must be a multiple
of wfSmdsSwUsageTimerInterval.
|
| wfSmdsSwUsageFlushInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.9 |
|
This number specifies the interval (number of minutes)
for the Billing process to write billing usage data on
to the file system from the wfSmdsSwUsage MIB followed
by zeroing the wfSmdsSwUsage MIB.
Note: When converted to seconds, this must be a multiple of
wfSmdsSwUsageTimerInterval.
|
| wfSmdsSwUsageCleanupInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.10 |
|
This is the interval (number of minutes) for the Billing
process to check and delete old billing usage data files.
Note: When converted to seconds, this must be a multilple
of wfSmdsSwUsageTimerInterval.
|
| wfSmdsSwUsageLocalTimeZone |
.1.3.6.1.4.1.18.3.5.9.7.9.11 |
|
Indicates local time zone of the switch
|
| wfSmdsSwUsageUpdateTimeStamp |
.1.3.6.1.4.1.18.3.5.9.7.9.12 |
|
Time stamp of last wfSmdsSwUsageUpdateInterval timer
expiration or the starting time of the current
wfSmdsSwUsageUpdateInterval. This value is number
of seconds since midnight Jan 1, 1976 (GMT).
|
| wfSmdsSwUsageStoreTimeStamp |
.1.3.6.1.4.1.18.3.5.9.7.9.13 |
|
Time stamp of last wfSmdsSwUsageStoreInterval
timer expiration or the starting time of the current
wfSmdsSwUsageStoreInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT).
|
| wfSmdsSwUsageFlushTimeStamp |
.1.3.6.1.4.1.18.3.5.9.7.9.14 |
|
Time stamp of last wfSmdsSwUsageFlushInterval
timer expiration or the starting time of the current
wfSmdsSwUsageFlushInterval. This value is
number of seconds since midnight Jan. 1, 1976 (GMT).
|
| wfSmdsSwUsageCleanupTimeStamp |
.1.3.6.1.4.1.18.3.5.9.7.9.15 |
|
Time stamp of last wfSmdsSwUsageCleanupInterval
timer expiration or the starting time of the current
wfSmdsSwUsageCleanupInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT).
|
| wfSmdsSwUsageUpdateData |
.1.3.6.1.4.1.18.3.5.9.7.9.16 |
|
Setting this attribute to a non-zero value will cause
an immediate updating of the billing usage data.
Once activated, this attribute should be reset to zero
to allow subsequent activations.
|
| wfSmdsSwUsageStoreData |
.1.3.6.1.4.1.18.3.5.9.7.9.17 |
|
Setting this attribute to a non-zero value will cause
an immediate updating and writing of the billing
usage data. Once activated, this attribute should
be reset to zero to allow subsequent activations.
|
| wfSmdsSwUsageFlushData |
.1.3.6.1.4.1.18.3.5.9.7.9.18 |
|
Setting this attribute to a non-zero value will cause
an immediate updating and writing of the billing usage
data and followed by zeroing the wfSmdsSwBillingUsage
MIB. Once activated, this attribute should be reset
to zero to allow subsequent activations.
|
| wfSmdsSwUsageFileCleanup |
.1.3.6.1.4.1.18.3.5.9.7.9.19 |
|
Setting this attribute to a non-zero value will cause
an immediate checking and deleting old billing usage
data files. Once activated, this attribute should
be reset to zero to allow subsequent activations.
|
| wfSmdsSwUsageState |
.1.3.6.1.4.1.18.3.5.9.7.9.20 |
|
current state of SMDS_SW billing.
|
| wfSmdsSwUsageCurVolume |
.1.3.6.1.4.1.18.3.5.9.7.9.21 |
|
current file system volume number used. This
number is the same as wfSmdsSwUsageVolume except
when the user sets wfSmdsSwUsageVolume to an
invalid number.
|
| wfSmdsSwUsageCurVolumeBackup |
.1.3.6.1.4.1.18.3.5.9.7.9.22 |
|
curent backup file system volume number used. This
number is the same as wfSmdsSwUsageVolumeBackUp except
when the user sets wfSmdsSwUsageVolume to an
invalid number.
Note: This feature is not implemented in this release.
|
| wfSmdsSwUsageCurDirectory |
.1.3.6.1.4.1.18.3.5.9.7.9.23 |
|
current directory name used. This number is the
same as wfSmdsSwUsageDirectory except when the user
sets wfSmdsSwUsageDirectory to an invalid name.
|
| wfSmdsSwUsageCurFilePrefix |
.1.3.6.1.4.1.18.3.5.9.7.9.24 |
|
current base file name used. This number is the
same as wfSmdsSwUsageFilePrefix except when the user
sets wfSmdsSwUsageFilePrefix to an invalid name.
|
| wfSmdsSwUsageCurTimerInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.25 |
|
current timer interval number used. This number is
the same as wfSmdsSwUsageTimerInterval except when the
user sets wfSmdsSwUsageTimerInterval to an invalid value.
|
| wfSmdsSwUsageCurUpdateInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.26 |
|
current update interval number used. This number is
the same as wfSmdsSwUsageUpdateInterval except when the
user sets wfSmdsSwUsageUpdateInterval to an invalid value.
|
| wfSmdsSwUsageCurStoreInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.27 |
|
current store timer interval number used. This
number is the same as wfSmdsSwUsageStoreInterval
except when the user sets wfSmdsSwUsageStoreInterval
to an invalid value.
|
| wfSmdsSwUsageCurFlushInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.28 |
|
current flush timer interval number used. This
number is the same as wfSmdsSwUsageFlushInterval
except when the user sets wfSmdsSwUsageFlushInterval
to an invalid value.
|
| wfSmdsSwUsageCurCleanupInterval |
.1.3.6.1.4.1.18.3.5.9.7.9.29 |
|
current file cleanup timer interval number used. This
number is the same as wfSmdsSwUsageCleanupInterval
except when the user sets wfSmdsSwUsageCleanupInterval
to an invalid value.
|
| wfSmdsSwUsageDebug |
.1.3.6.1.4.1.18.3.5.9.7.9.30 |
|
Enable/Disable printing of debug edl (trap)
messages.
NOTE: Do not enable this attribute in operational enviornment
as it will likely flood the logging facility. This
attribute is reserved for specialized debugging in a
controlled lab enviornment.
|
| wfSmdsSwUsageCurDebug |
.1.3.6.1.4.1.18.3.5.9.7.9.31 |
|
current debug value used. This value is the
same as wfSmdsSwUsageDebug except when the user
sets wfSmdsSwUsageDeubg to an invalid value.
|
| wfSmdsSwUsageSwitchId |
.1.3.6.1.4.1.18.3.5.9.7.9.32 |
|
switch id used in the billing usage data file.
|
| wfSmdsSwUsageNumEntries |
.1.3.6.1.4.1.18.3.5.9.7.9.33 |
|
number of entries in wfSmdsSwUsageTable
|
| wfSmdsSwUsageEntry |
.1.3.6.1.4.1.18.3.5.9.7.10.1 |
|
The parameters for Billing Usage.
|
| wfSmdsSwSsiSniEntry |
.1.3.6.1.4.1.18.3.5.9.7.11.1 |
|
The parameters for a particular SSI/SNI.
|
| wfSmdsSwSubCct |
.1.3.6.1.4.1.18.3.5.9.7.1.1.4 |
|
cct number for this instance
|
| wfSmdsSwSubDelete |
.1.3.6.1.4.1.18.3.5.9.7.1.1.1 |
|
create/delete parameter, dflt = created
|
| wfSmdsSwSubDisable |
.1.3.6.1.4.1.18.3.5.9.7.1.1.2 |
|
enable/disable parameter, dflt = enabled
|
| wfSmdsSwSubState |
.1.3.6.1.4.1.18.3.5.9.7.1.1.3 |
|
SMDS Switch state variable, Up, Down Init, Not Present
|
| wfSmdsSwSubDisableHrtbtPoll |
.1.3.6.1.4.1.18.3.5.9.7.1.1.5 |
|
determine use of DXI heartbeat poll
|
| wfSmdsSwSubHrtbtPollAddr |
.1.3.6.1.4.1.18.3.5.9.7.1.1.6 |
|
determine if heartbeat poll messages
are sent as as CPE or network
(CSU/DSU) messages.
|
| wfSmdsSwSubHrtbtPollInterval |
.1.3.6.1.4.1.18.3.5.9.7.1.1.7 |
|
heartbeat polling messages get sent every this many
seconds - we don't want the polling interval to be
less than or equal to the no-acknowledgment timer.
|
| wfSmdsSwSubHrtbtPollDownCount |
.1.3.6.1.4.1.18.3.5.9.7.1.1.8 |
|
if this many consecutive heartbeat polling messages
go unacknowledged, log an event declaring the line down
|
| wfSmdsSwSubDisableNetMgmt |
.1.3.6.1.4.1.18.3.5.9.7.1.1.9 |
|
determine use of LMI network management
|
| wfSmdsSwSubInterfaceType |
.1.3.6.1.4.1.18.3.5.9.7.1.1.10 |
|
defines whether this interface is a SNI or
SSI.
|
| wfSmdsSwSubInterfaceIndex |
.1.3.6.1.4.1.18.3.5.9.7.1.1.11 |
|
The index number for the SSI/SNI. Each SNI in the
network has a unique id. The value of this object
identifies the SIP port interface for which this
entry contains management information.
|
| wfSmdsSwSubDisableL3PduChecks |
.1.3.6.1.4.1.18.3.5.9.7.1.1.12 |
|
Enable/Disable L3_PDU verification.
Default is disabled.
|
| wfSmdsSwSubDisableUsageGeneration |
.1.3.6.1.4.1.18.3.5.9.7.1.1.13 |
|
enable/disable usage data generation.
Default is disabled.
|
| wfSmdsSwSubDisableMIR |
.1.3.6.1.4.1.18.3.5.9.7.1.1.14 |
|
enable/disable MIR enforcement, default is
disabled.
|
| wfSmdsSwSubUnassignedSAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.15 |
|
The total number of SIP Level 3 PDUs discarded
by the SMDS Switch because the Source Address was
not assigned to the SNI.
|
| wfSmdsSwSubSAScreenViolations |
.1.3.6.1.4.1.18.3.5.9.7.1.1.16 |
|
The number of SIP L3_PDUs that violated the
address screen based on source address screening
for an SNI.
|
| wfSmdsSwSubDAScreenViolations |
.1.3.6.1.4.1.18.3.5.9.7.1.1.17 |
|
The total number of SIP Level 3 PDUs that
violated the Destination Address Screening using
either an Individual Address Screen or a
Group Address Screen for the SNI.
|
| wfSmdsSwSubNumPDUExceededMIR |
.1.3.6.1.4.1.18.3.5.9.7.1.1.18 |
|
The total number of SIP L3_PDUs that exceeded
the MIR on this interface.
|
| wfSmdsSwSubSipL3ReceivedIAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.19 |
|
The total number of individually addressed SIP Level 3
PDUs received by the SMDS Switch from the CPE.
The total includes only unerrored L3PDUs.
|
| wfSmdsSwSubSipL3ReceivedGAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.20 |
|
The total number of group addressed SIP Level 3 PDUs
received by the SMDS Switch from the CPE.
The total includes only unerrored L3PDUs.
|
| wfSmdsSwSubSipL3UnrecIAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.21 |
|
The number of SIP Level 3 PDUs received by the
SMDS Switch from the CPE that have an unknown,
valid, individual SMDS Destination Address.
|
| wfSmdsSwSubSipL3UnrecGAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.22 |
|
The number of SIP Level 3 PDUs received by the
SMDS Switch from the CPE that have an unknown,
valid, group SMDS Destination Address.
|
| wfSmdsSwSubSipL3SentIAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.23 |
|
The number of individually addressed SIP Level 3 PDUs
that have been sent by this SMDS Switch to the CPE.
|
| wfSmdsSwSubSipL3SentGAs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.24 |
|
The number of group addressed SIP L3PDUs that have been
sent by this SMDS Switch to the CPE.
|
| wfSmdsSwSubSipL3Errors |
.1.3.6.1.4.1.18.3.5.9.7.1.1.25 |
|
The total number of SIP Level 3 PDUs received
by the SMDS Switch from the CPE that were
discovered to have protocol errors.
|
| wfSmdsSwSubSipL3InvAddrTypes |
.1.3.6.1.4.1.18.3.5.9.7.1.1.26 |
|
The total number of SIP Level 3 PDUs received
by the SMDS Switch from the CPE that had a value
in the Source or Destination Address type subfield
other than group or individual. Or if the
Source Address type subfield value indicates
a group address.
|
| wfSmdsSwSubSipL3VersionSupport |
.1.3.6.1.4.1.18.3.5.9.7.1.1.27 |
|
A value which indicates the version(s) of SIP
that this SNI supports. The value is a sum.
This sum initially takes the value zero. For each
version, V, that this interface supports, 2 raised
to (V - 1) is added to the sum. For example, a
port supporting versions 1 and 2 would have a
value of (2^(1-1)+2^(2-1))=3. The
SipL3VersionSupport is effectively a bit mask with
Version 1 equal to the least significant bit (LSB).
|
| wfSmdsSwSubSAScrnViolationOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.28 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded as a
result of a Source Address violation.
|
| wfSmdsSwSubDAScrnViolationOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.29 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded as a
result of a Destination Address violation.
|
| wfSmdsSwSubUnassignedSAOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.30 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded as a
result of a unassigned Source Address.
|
| wfSmdsSwSubSAErrorOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.31 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of a Source Address Field Format error.
|
| wfSmdsSwSubDAErrorOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.32 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of a Destination Address Field Format error.
|
| wfSmdsSwSubInvalidBASizeOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.33 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid BASize field value.
|
| wfSmdsSwSubInvalidHELenOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.34 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Length Field value.
|
| wfSmdsSwSubInvalidHEVerOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.35 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Version element.
|
| wfSmdsSwSubInvalidHECarOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.36 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Carrier element.
|
| wfSmdsSwSubInvalidHEPadOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.37 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Pad element.
|
| wfSmdsSwSubBEtagOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.38 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of a Beginning-End Tag mismatch.
|
| wfSmdsSwSubBAsizeNELenOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.39 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
the BAsize and Length fields are not equal.
|
| wfSmdsSwSubIncorrectLenOccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.40 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an incorrect length.
|
| wfSmdsSwSubExceededMIROccur |
.1.3.6.1.4.1.18.3.5.9.7.1.1.41 |
|
A string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
it exceeded the MIR.
|
| wfSmdsSwSubInBandMgmtDisable |
.1.3.6.1.4.1.18.3.5.9.7.1.1.42 |
|
In-Band Management enable/disable parameter.
This attribute indicates whether the local
WSNI (only) is enabled to run IP in Host mode,
for in-band management purposes, in additional
to being a switch interface. The default is
disabled
|
| wfSmdsSwSubInBandMgmtLocalAddr |
.1.3.6.1.4.1.18.3.5.9.7.1.1.43 |
|
Special SMDS E.164 Individual address that
identifies this local circuit. This attribute
is only used when the wfSmdsSwSubInBandMgmtDisable
attribute is set to ENABLED
|
| wfSmdsSwSubInBandMgmtReceivedPDUs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.44 |
|
The total number of individually addressed In-Band
Management PDUs received by the SMDS Switch from
the CPE. The total includes only unerrored PDUs.
|
| wfSmdsSwSubInBandMgmtSentPDUs |
.1.3.6.1.4.1.18.3.5.9.7.1.1.45 |
|
The number of individually addressed In-Band Management
PDUs that have been sent by this SMDS Switch to the CPE.
|
| wfSmdsSwSubInBandMgmtMaxLenErrors |
.1.3.6.1.4.1.18.3.5.9.7.1.1.46 |
|
The number of In-Band Management PDUs that have
exceeded the MTU size configured for the line
|
| wfSmdsSwSubInBandMgmtEncapsErrors |
.1.3.6.1.4.1.18.3.5.9.7.1.1.47 |
|
The number of In-Band Management PDUs that have
invalid encapsulation schemes
|
| wfSmdsSwSubGAPartialResolve |
.1.3.6.1.4.1.18.3.5.9.7.1.1.48 |
|
The number of times group addressed L3_PDU's
could not be resolved due to congestion.
|
| wfSmdsSwSubDANotOnSni |
.1.3.6.1.4.1.18.3.5.9.7.1.1.49 |
|
The number of times a L3_PDU was discarded
at the egress because the destination
address was not assigned to the SNI.
|
| wfSmdsSwEndpE164AddrHigh |
.1.3.6.1.4.1.18.3.5.9.7.2.1.2 |
|
The High end of the E.164 address range for
this endpoint information.
|
| wfSmdsSwEndpE164AddrDelta |
.1.3.6.1.4.1.18.3.5.9.7.2.1.3 |
|
The difference between wfSmdsSwEndpE164AddrHigh
to the beginning of the endpoint information.
|
| wfSmdsSwEndpInterfaceIndex |
.1.3.6.1.4.1.18.3.5.9.7.2.1.4 |
|
This number indicates which SNI
the endpoint information refers to.
|
| wfSmdsSwEndpDelete |
.1.3.6.1.4.1.18.3.5.9.7.2.1.1 |
|
Indication to delete this endpoint entry.
|
| wfSmdsSwInterfaceType |
.1.3.6.1.4.1.18.3.5.9.7.3.1.2 |
|
This number determines whether the interface
information refers to an SNI, SSI, or ICI.
|
| wfSmdsSwInterfaceIndex |
.1.3.6.1.4.1.18.3.5.9.7.3.1.3 |
|
This number indicates which SNI, SSI, or
ICI the interface information refers to.
|
| wfSmdsSwInterfaceDelete |
.1.3.6.1.4.1.18.3.5.9.7.3.1.1 |
|
Indication to delete this interface entry.
|
| wfSmdsSwInterfaceIpAddr |
.1.3.6.1.4.1.18.3.5.9.7.3.1.4 |
|
IP Address associated with the interface.
|
| wfSmdsSwInterfaceMIR |
.1.3.6.1.4.1.18.3.5.9.7.3.1.5 |
|
This number represents the MIR in octets per second.
|
| wfSmdsSwInterfaceCurrentRate |
.1.3.6.1.4.1.18.3.5.9.7.3.1.6 |
|
This number indicates the current rate of traffic flow
to the interface. The software updates this counter.
When this attribute exceeds wfSmdsSwInterfaceMIR
traffic to the interface is dropped. Periodically
the sofware resets this counter to zero.
|
| wfSmdsSwAssocScrnSniIndex |
.1.3.6.1.4.1.18.3.5.9.7.4.1.2 |
|
The value of this object identifies the SIP Port
interface for which this entry contains management
information. The value of this object for a
particular interface has the same value as the
ifIndex, defined in RFC1213, for the same
interface.
|
| wfSmdsSwAssocScrnAddrInd |
.1.3.6.1.4.1.18.3.5.9.7.4.1.3 |
|
The value of this object identifies one of the
SMDS addresses for the SNI, identified by the
wfSmdsSwAssocScrnSniIndex that belongs to this
individual (or group) address screen
(wfSmdsSwAssocScrnAddrInd). This list will
contain both individual and group addresses,
because this list is used for both Destination
Address Screening and Source Address Screening; the
destination address in the L3_PDU that is
undergoing Source Address Screening may be either a
group or individual address that is assigned to
that SNI. One screen will have a maximum of 64
associated addresses; up to a maximum of 16
individual addresses identifying an SNI and up to a
maximum of 48 group addresses identifying an SNI.
|
| wfSmdsSwAssocScrnIndivIndex |
.1.3.6.1.4.1.18.3.5.9.7.4.1.4 |
|
The value of this object identifies the individual
address screening list. There is at least one
individual address screen and at most s individual
address screens per SNI. The initial value of s is
defined to be 4. In the future more screening
lists per SNI may be allowed. The values of this
object correspond to the values of wfSmdsSwIAScrnIndex
in the wfSmdsSwIAScrnTable.
|
| wfSmdsSwAssocScrnGrpIndex |
.1.3.6.1.4.1.18.3.5.9.7.4.1.5 |
|
The value of this object identifies the group
address screening list. There is at least one
group address screen and at most s group address
screens per SNI. The initial value of s is defined
to be 4. In the future more screening lists per
SNI may be allowed. The values of this object
correspond to the values of wfSmdsSwGAScrnIndex in the
wfSmdsSwGAScrnTable. This field applies only to
individual addresses on the SNI because it applies
only to destination address screening of group addresses.
|
| wfSmdsSwAssocScrnDelete |
.1.3.6.1.4.1.18.3.5.9.7.4.1.1 |
|
Indication to delete this associated screen entry.
|
| wfSmdsSwIAScrnSniIndex |
.1.3.6.1.4.1.18.3.5.9.7.5.1.2 |
|
The value of this object identifies the SIP Port
interface for which this entry contains management
information. The value of this object for a
particular interface has the same value as the
ifIndex, defined in RFC1213, for the same
interface.
|
| wfSmdsSwIAScrnIndex |
.1.3.6.1.4.1.18.3.5.9.7.5.1.3 |
|
The value of this object identifies the individual
address screening list. There are at least one
individual address screen and at most s individual
address screens per SNI. The initial value of s is
defined to be 4. In the future more screening
lists per SNI may be allowed. The values of this
object correspond to the values of wfSmdsSwScrnIndex in
the wfSmdsSwScrnTable.
|
| wfSmdsSwIAScrnAddr |
.1.3.6.1.4.1.18.3.5.9.7.5.1.4 |
|
The value of this object identifies one of the
individual addresses to be screened for source and
destination address screening for the SNI
identified by the wfSmdsSwIAScrnSniIndex and for the
particular individual address screen
(wfSmdsSwIAScrnIndex).
|
| wfSmdsSwIAScrnDelete |
.1.3.6.1.4.1.18.3.5.9.7.5.1.1 |
|
Indication to delete this IA screen entry.
|
| wfSmdsSwGAScrnSniIndex |
.1.3.6.1.4.1.18.3.5.9.7.6.1.2 |
|
The value of this object identifies the SIP Port
interface for which this entry contains management
information. The value of this object for a
particular interface has the same value as the
ifIndex, defined in RFC1213, for the same
interface.
|
| wfSmdsSwGAScrnIndex |
.1.3.6.1.4.1.18.3.5.9.7.6.1.3 |
|
The value of this object identifies the group
address screening list. There is at least one
group address screen and at most s group address
screens per SNI. The initial value of s is defined
to be 4. In the future more screening lists per
SNI may be allowed. The values of this object
correspond to the values of wfSmdsSwScrnIndex in the
wfSmdsSwSmdsScrnTable.
|
| wfSmdsSwGAScrnAddr |
.1.3.6.1.4.1.18.3.5.9.7.6.1.4 |
|
The value of this object identifies one of the
group addresses to be screened for destination
address screening for the SNI identified by the
wfSmdsSwGAScrnSniIndex and for the particular group
address screen (wfSmdsSwGAScrnIndex).
|
| wfSmdsSwGAScrnDelete |
.1.3.6.1.4.1.18.3.5.9.7.6.1.1 |
|
Indication to delete this GA screen entry.
|
| wfSmdsSwGASSI |
.1.3.6.1.4.1.18.3.5.9.7.7.1.2 |
|
The SSI associated with this Group Address.
An SSI of 0 is used to indicate that all interfaces
can use the group address. An SSI other than 0
indicates that only the SSI, or an SNI associated
with the SSI should use the group.
|
| wfSmdsSwGAGroupAddress |
.1.3.6.1.4.1.18.3.5.9.7.7.1.3 |
|
A Group Address.
|
| wfSmdsSwGAGroupMember |
.1.3.6.1.4.1.18.3.5.9.7.7.1.4 |
|
An individual SMDS address that belongs to this
Group Address.
|
| wfSmdsSwGADelete |
.1.3.6.1.4.1.18.3.5.9.7.7.1.1 |
|
Indication to delete this group address entry.
|
| wfSmdsSwCurUsageSni |
.1.3.6.1.4.1.18.3.5.9.7.8.1.2 |
|
The SNI number of the interface generating the
usage information
|
| wfSmdsSwCurUsageDestAddr |
.1.3.6.1.4.1.18.3.5.9.7.8.1.3 |
|
The destination address of a SMDS group or
individual E.164 address.
|
| wfSmdsSwCurUsageSrcAddr |
.1.3.6.1.4.1.18.3.5.9.7.8.1.4 |
|
The source address of a SMDS individual
E.164 address.
|
| wfSmdsSwCurUsageDelete |
.1.3.6.1.4.1.18.3.5.9.7.8.1.1 |
|
Indication to delete this current usage entry.
|
| wfSmdsSwCurUsageGrpIndAddr |
.1.3.6.1.4.1.18.3.5.9.7.8.1.5 |
|
When the destination address of an L3_PDU is
a group address, this attribute is set to one of
the E.164 individual addresses that is in the
group address and on the destination SNI.
|
| wfSmdsSwCurUsageNumL3Pdu |
.1.3.6.1.4.1.18.3.5.9.7.8.1.6 |
|
This number represents the number of billable
L3_PDUs counted by the circuit during the most recent
collection interval.
|
| wfSmdsSwCurUsageNumOctet |
.1.3.6.1.4.1.18.3.5.9.7.8.1.7 |
|
This number represents the number of billable
octets counted by the circuit during the most recent
collection interval.
|
| wfSmdsSwCurUsageToBeDeleted |
.1.3.6.1.4.1.18.3.5.9.7.8.1.8 |
|
Indication to billing to delete
this current usage entry.
|
| wfSmdsSwUsageSni |
.1.3.6.1.4.1.18.3.5.9.7.10.1.2 |
|
The circuit number of the interface generating the
usage information
|
| wfSmdsSwUsageDestAddr |
.1.3.6.1.4.1.18.3.5.9.7.10.1.3 |
|
Instance identifier; the destination address of an L3_PDU.
The SMDS Switch collects usage data based on the
destination/source address pair.
|
| wfSmdsSwUsageSrcAddr |
.1.3.6.1.4.1.18.3.5.9.7.10.1.4 |
|
Instance identifier; the source address of an L3_PDU.
The SMDS Switch collects usage data based on the
destination/source address pair.
|
| wfSmdsSwUsageDelete |
.1.3.6.1.4.1.18.3.5.9.7.10.1.1 |
|
Indicates status of this entry. SMDS_SW_USAGE_CREATED
is the normal case. SMDS_SW_USAGE_DELETED means this
billing instance will be deleted at the end of
the next wfSmdsSwUsageFlush period after this
billing record is written out to the file system.
|
| wfSmdsSwUsageStartTimeStampHigh |
.1.3.6.1.4.1.18.3.5.9.7.10.1.5 |
|
Time stamp of the starting time (the high 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).
|
| wfSmdsSwUsageStartTimeStampLow |
.1.3.6.1.4.1.18.3.5.9.7.10.1.6 |
|
Time stamp of the starting time (the low 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).
|
| wfSmdsSwUsageEndTimeStampHigh |
.1.3.6.1.4.1.18.3.5.9.7.10.1.7 |
|
Time stamp of the ending time (the high 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).
|
| wfSmdsSwUsageEndTimeStampLow |
.1.3.6.1.4.1.18.3.5.9.7.10.1.8 |
|
Time stamp of the ending time (the low 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).
|
| wfSmdsSwUsageSentL3PduHigh |
.1.3.6.1.4.1.18.3.5.9.7.10.1.9 |
|
Number (the high 32 bits) of L3_PDUs
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.
|
| wfSmdsSwUsageSentL3PduLow |
.1.3.6.1.4.1.18.3.5.9.7.10.1.10 |
|
Number (the low 32 bits) of L3_PDUs
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.
|
| wfSmdsSwUsageSentOctetHigh |
.1.3.6.1.4.1.18.3.5.9.7.10.1.11 |
|
Number (the high 32 bits) of octets
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.
|
| wfSmdsSwUsageSentOctetLow |
.1.3.6.1.4.1.18.3.5.9.7.10.1.12 |
|
Number (the low 32 bits) of octets
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.
|
| wfSmdsSwUsageLastL3PduHigh |
.1.3.6.1.4.1.18.3.5.9.7.10.1.13 |
|
The (high 32 bits) value of
wfSmdsSwCurUsageNumL3Pdu value at
wfSmdsSwUsageEndTimeStamp.
Note: Since wfSmdsSwCurUsageNumL3Pdu
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfSmdsSwCurUsageNumL3Pdu has wrapped around.
|
| wfSmdsSwUsageLastL3PduLow |
.1.3.6.1.4.1.18.3.5.9.7.10.1.14 |
|
The (low 32 bits) value of
wfSmdsSwCurUsageNumL3Pdu value at
wfSmdsSwUsageEndTimeStamp.
|
| wfSmdsSwUsageLastOctetHigh |
.1.3.6.1.4.1.18.3.5.9.7.10.1.15 |
|
The (high 32 bits) value of
wfSmdsSwCurUsageNumOctets value at
wfSmdsSwUsageEndTimeStamp.
Note: Since wfSmdsSwCurUsageNumOctets
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfSmdsSwCurUsageNumOctets has wrapped around.
|
| wfSmdsSwUsageLastOctetLow |
.1.3.6.1.4.1.18.3.5.9.7.10.1.16 |
|
The (low 32 bits) value of
wfSmdsSwCurUsageNumOctets value at
wfSmdsSwUsageEndTimeStamp.
|
| wfSmdsSwUsageGrpIndAddr |
.1.3.6.1.4.1.18.3.5.9.7.10.1.17 |
|
When the destination address of an L3_PDU is
a group address, this attribute is set to one of
the E.164 individual addresses that is in the
group address and on the destination SNI.
|
| wfSmdsSwSsiSniSSI |
.1.3.6.1.4.1.18.3.5.9.7.11.1.2 |
|
An SSI.
|
| wfSmdsSwSsiSniSNI |
.1.3.6.1.4.1.18.3.5.9.7.11.1.3 |
|
An SNI.
|
| wfSmdsSwSsiSniDelete |
.1.3.6.1.4.1.18.3.5.9.7.11.1.1 |
|
Indication to delete this SSI/SNI entry.
|
