Wellfleet-SYS-SVC-MIB device MIB details by Wellfleet

Wellfleet-SYS-SVC-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Wellfleet-SYS-SVC-MIB.

Vendor:	Wellfleet
Mib:	Wellfleet-SYS-SVC-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

Wellfleet-SYS-SVC-MIB DEFINITIONS ::= BEGIN
 
-- Created by mdl2asn version 3.1
-- Creation date: Wed Aug 30 16:49:00 EDT 1995


    IMPORTS

      IpAddress
        FROM RFC1155-SMI
      OBJECT-TYPE
        FROM RFC-1212
      DisplayString
        FROM RFC1213-MIB
      wfNetBootGroup
        FROM Wellfleet-COMMON-MIB;


    wfNetbootCfgGroup	OBJECT IDENTIFIER ::= { wfNetBootGroup 1 }

    wfNetbootImage OBJECT-TYPE
        SYNTAX	INTEGER {
    		    imageoff(1),
    		    imageon(2)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Enables booting of an executable image over the network. If
                disabled, then the image will be read from a local file system."
        DEFVAL	{ imageon }
        ::= { wfNetbootCfgGroup 1 }

    wfNetbootConfig OBJECT-TYPE
        SYNTAX	INTEGER {
    		    configoff(1),
    		    configon(2)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Enables booting of a configuration file over the network. If
                disabled, then the config will be read from a local file system."
        DEFVAL	{ configon }
        ::= { wfNetbootCfgGroup 2 }

    wfNetbootServerAddress OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "IP address of remote server."
        ::= { wfNetbootCfgGroup 3 }

    wfNetbootImageName OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Pathname of image file on remote server."
        ::= { wfNetbootCfgGroup 4 }

    wfNetbootConfigName OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Pathname of configuration file on remote server."
        ::= { wfNetbootCfgGroup 5 }

    wfNetbootCfgDelete OBJECT-TYPE
        SYNTAX	INTEGER {
    		    create(1),
    		    delete(2)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "create/delete parameter, dflt = created"
        DEFVAL	{ create }
        ::= { wfNetbootCfgGroup 6 }

    wfNetbootCurrGroup	OBJECT IDENTIFIER ::= { wfNetBootGroup 2 }

    wfNetbootImageCurr OBJECT-TYPE
        SYNTAX	INTEGER {
    		    imagecurroff(1),
    		    imagecurron(2)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Current value of Netboot image flag in Non-Volatile RAM."
        DEFVAL	{ imagecurron }
        ::= { wfNetbootCurrGroup 1 }

    wfNetbootConfigCurr OBJECT-TYPE
        SYNTAX	INTEGER {
    		    configcurroff(1),
    		    configcurron(2)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Current value of Netboot config flag in Non-Volatile RAM."
        DEFVAL	{ configcurron }
        ::= { wfNetbootCurrGroup 2 }

    wfNetbootServerAddressCurr OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "IP address of remote server."
        ::= { wfNetbootCurrGroup 3 }

    wfNetbootImageNameCurr OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Pathname of image file on remote server."
        ::= { wfNetbootCurrGroup 4 }

    wfNetbootConfigNameCurr OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Pathname of configuration file on remote server."
        ::= { wfNetbootCurrGroup 5 }

    wfNetbootCfgTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF WfNetbootCfgEntry
        ACCESS	not-accessible
        STATUS	mandatory
        DESCRIPTION
                "A Table of Interface-specific Netboot Configuration Parameters"
        ::= { wfNetBootGroup 3 }

    wfNetbootCfgEntry OBJECT-TYPE
        SYNTAX	WfNetbootCfgEntry
        ACCESS	not-accessible
        STATUS	mandatory
        DESCRIPTION
                "Values of a particular interface's configuration parameters."
        INDEX	{ wfNetbootSlot,
    		  wfNetbootConnector }
        ::= { wfNetbootCfgTable 1 }

    WfNetbootCfgEntry ::= SEQUENCE {
    	    wfNetbootDelete
    		INTEGER,
    	    wfNetbootSlot
    		INTEGER,
    	    wfNetbootConnector
    		INTEGER,
    	    wfNetbootIpAddr
    		IpAddress,
    	    wfNetbootIpMask
    		IpAddress,
    	    wfNetbootNextHop
    		IpAddress,
    	    wfNetbootProtoMask
    		INTEGER,
    	    wfNetbootDisable
    		INTEGER,
    	    wfNetbootConnName
    		DisplayString,
    	    wfNetbootTokenRingSpeed
    		INTEGER,
    	    wfNetbootBchanRate
    		INTEGER,
            wfNetbootDsuCsuOpMode
                INTEGER
        }

    wfNetbootDelete OBJECT-TYPE
        SYNTAX	INTEGER {
    		    create(1),
    		    delete(2)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "create/delete parameter, dflt = created
                Deleteing this instance will set the corresponding NOVRAM
                values to the default settings."
        DEFVAL	{ create }
        ::= { wfNetbootCfgEntry 1 }

    wfNetbootSlot OBJECT-TYPE
        SYNTAX	INTEGER(1..14)
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "instance ID Slot, filled in by driver"
        ::= { wfNetbootCfgEntry 2 }

    wfNetbootConnector OBJECT-TYPE
        SYNTAX	INTEGER {
    		    xcvr1(1),
    		    com1(2),
    		    com2(3),
    		    com3(4),
    		    xcvr11(5),
    		    xcvr12(6),
    		    com11(7),
    		    com12(8),
    		    xcvr21(9),
    		    xcvr22(10),
    		    com21(11),
    		    com22(12),
    		    xcvr31(13),
    		    xcvr32(14),
    		    com31(15),
    		    com32(16),
    		    xcvr41(17),
    		    xcvr42(18),
    		    com41(19),
    		    com42(20),
    		    xcvr2(21),
		    xcvr33(22),
		    xcvr34(23),
		    arnxcvr1(24),
		    arnxcvr2(25),
		    arncom1(26),
		    arncom2(27),
		    arncom3(28),
		    arncom4(29),
		    arncom5(30),
		    arnmau1(31),
		    arnmau2(32),
    		    com13(33),
    		    com14(34),
    		    com23(35),
    		    com24(36),
    		    com33(37),
    		    com34(38),
    		    com43(39),
    		    com44(40)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Unique number which identifies the interface for which the
                following parameters are configured."
        ::= { wfNetbootCfgEntry 3 }

    wfNetbootIpAddr OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "IP address to use on this interface"
        ::= { wfNetbootCfgEntry 4 }

    wfNetbootIpMask OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "IP address mask to use on this interface"
        ::= { wfNetbootCfgEntry 5 }

    wfNetbootNextHop OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "IP address of the next hop router connected to this interface.
                This value is used to auto-configure a static route for
                Network Boot."
        ::= { wfNetbootCfgEntry 6 }

    wfNetbootProtoMask OBJECT-TYPE
        SYNTAX	INTEGER {
    		    fron(1),
    		    x25on(2),
    		    intrnclkon(3),
    		    noton(4),
    		    annexaon(5),
    		    lmion(6),
				ppp(7)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Bit Mask indicating a non-default protocol is being used on
                this interface."
        DEFVAL	{ noton }
        ::= { wfNetbootCfgEntry 7 }

    wfNetbootDisable OBJECT-TYPE
        SYNTAX	INTEGER {
    		    enable(1),
    		    disable(2)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Enable or disable the interface for Netbooting."
        DEFVAL	{ enable }
        ::= { wfNetbootCfgEntry 8 }

    wfNetbootConnName OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Connector name."
        ::= { wfNetbootCfgEntry 9 }

    wfNetbootTokenRingSpeed OBJECT-TYPE
        SYNTAX	INTEGER {
    		    mbps4(4),
    		    mbps16(16)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Speed of the Token Ring interface for Netbooting."
        DEFVAL	{ mbps16 }
        ::= { wfNetbootCfgEntry 10 }

    wfNetbootBchanRate OBJECT-TYPE
        SYNTAX	INTEGER {
    		    rate64k(64),
    		    rate128k(128)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Speed B Channel for Netbooting. AN 200 Only"
        DEFVAL	{ rate64k }
        ::= { wfNetbootCfgEntry 11 }

     wfNetbootDsuCsuOpMode OBJECT-TYPE
        SYNTAX INTEGER {
                   rate56k(56),
                   rate64k(64)
               }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
               "Dsu/Csu interface speed for Netbooting"
        DEFVAL { rate56k }
        ::= { wfNetbootCfgEntry 12 }


    wfNetbootCurrTable OBJECT-TYPE
        SYNTAX	SEQUENCE OF WfNetbootCurrEntry
        ACCESS	not-accessible
        STATUS	mandatory
        DESCRIPTION
                "A Table of current values for Interface-specific Netboot Parameters"
        ::= { wfNetBootGroup 4 }

    wfNetbootCurrEntry OBJECT-TYPE
        SYNTAX	WfNetbootCurrEntry
        ACCESS	not-accessible
        STATUS	mandatory
        DESCRIPTION
                "Values of a particular interface's current configuration parameters."
        INDEX	{ wfNetbootCurrSlot,
    		  wfNetbootCurrConnector }
        ::= { wfNetbootCurrTable 1 }

    WfNetbootCurrEntry ::= SEQUENCE {
    	    wfNetbootCurrSlot
    		INTEGER,
    	    wfNetbootCurrConnector
    		INTEGER,
    	    wfNetbootCurrIpAddr
    		IpAddress,
    	    wfNetbootCurrIpMask
    		IpAddress,
    	    wfNetbootCurrNextHop
    		IpAddress,
    	    wfNetbootCurrProtoMask
    		INTEGER,
    	    wfNetbootCurrDisable
    		INTEGER,
    	    wfNetbootCurrConnName
    		DisplayString,
    	    wfNetbootCurrTokenRingSpeed
    		INTEGER,
            wfNetbootCurrBchanRate
	        INTEGER,
            wfNetbootCurrDsuCsuOpMode
                INTEGER
        }

    wfNetbootCurrSlot OBJECT-TYPE
        SYNTAX	INTEGER(1..14)
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "instance ID Slot, filled in by driver"
        ::= { wfNetbootCurrEntry 1 }

    wfNetbootCurrConnector OBJECT-TYPE
        SYNTAX	INTEGER {
    		    currxcvr1(1),
    		    currcom1(2),
    		    currcom2(3),
    		    currcom3(4),
    		    currxcvr11(5),
    		    currxcvr12(6),
    		    currcom11(7),
    		    currcom12(8),
    		    currxcvr21(9),
    		    currxcvr22(10),
    		    currcom21(11),
    		    currcom22(12),
    		    currxcvr31(13),
    		    currxcvr32(14),
    		    currcom31(15),
    		    currcom32(16),
    		    currxcvr41(17),
    		    currxcvr42(18),
    		    currcom41(19),
    		    currcom42(20),
    		    currxcvr2(21),
		    currxcvr33(22),
		    currxcvr34(23),
		    currarnxcvr1(24),
		    currarnxcvr2(25),
		    currarncom1(26),
		    currarncom2(27),
		    currarncom3(28),
		    currarncom4(29),
		    currarncom5(30),
		    currarnmau1(31),
		    currarnmau2(32),
    		    currcom13(33),
    		    currcom14(34),
    		    currcom23(35),
    		    currcom24(36),
    		    currcom33(37),
    		    currcom34(38),
    		    currcom43(39),
    		    currcom44(40)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Unique number which identifies the interface for which the
                following parameters are configured."
        ::= { wfNetbootCurrEntry 2 }

    wfNetbootCurrIpAddr OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "IP address to use on this interface"
        ::= { wfNetbootCurrEntry 3 }

    wfNetbootCurrIpMask OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "IP address mask to use on this interface"
        ::= { wfNetbootCurrEntry 4 }

    wfNetbootCurrNextHop OBJECT-TYPE
        SYNTAX	IpAddress
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "IP address of the next hop router connected to this interface.
                This value is used to auto-configure a static route for
                Network Boot."
        ::= { wfNetbootCurrEntry 5 }

    wfNetbootCurrProtoMask OBJECT-TYPE
        SYNTAX	INTEGER {
    		    frcurron(1),
    		    x25curron(2),
    		    intrnclkcurron(3),
    		    notcurron(4),
    		    annexaon(5),
    		    lmion(6),
				ppp(7)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Bit Mask indicating a non-default protocol is being used on
                this interface."
        DEFVAL	{ notcurron }
        ::= { wfNetbootCurrEntry 6 }

    wfNetbootCurrDisable OBJECT-TYPE
        SYNTAX	INTEGER {
    		    enable(1),
    		    disable(2)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Enable or disable the interface for Netbooting."
        DEFVAL	{ enable }
        ::= { wfNetbootCurrEntry 7 }

    wfNetbootCurrConnName OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Connector name."
        ::= { wfNetbootCurrEntry 8 }

    wfNetbootCurrTokenRingSpeed OBJECT-TYPE
        SYNTAX	INTEGER {
    		    mbps4(4),
    		    mbps16(16)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Speed of the Token Ring interface for Netbooting."
        DEFVAL	{ mbps16 }
        ::= { wfNetbootCurrEntry 9 }

    wfNetbootCurrBchanRate OBJECT-TYPE
        SYNTAX	INTEGER {
    		    rate64k(64),
    		    rate128k(128)
    		}
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Speed B Channel for Netbooting. AN 200 Only"
        DEFVAL	{ rate64k }
        ::= { wfNetbootCurrEntry 10 }

    wfNetbootCurrDsuCsuOpMode OBJECT-TYPE
        SYNTAX  INTEGER {
                    rate56k(56),
                    rate64k(64)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Dsu/Csu interface speed for Netbooting"
        DEFVAL  { rate56k }
       ::= { wfNetbootCurrEntry 11 }
      
    END  -- Wellfleet-SYS-SVC-MIB