Wellfleet-SYSL-MIB device MIB details by Wellfleet
Wellfleet-SYSL-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing Wellfleet-SYSL-MIB.
| Vendor: | Wellfleet |
|---|---|
| Mib: | Wellfleet-SYSL-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
Wellfleet-SYSL-MIB DEFINITIONS ::= BEGIN -- Created by mdl2asn version 3.1 -- Creation date: Wed Aug 30 16:48:55 EDT 1995 IMPORTS IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB wfSyslogGroup FROM Wellfleet-COMMON-MIB; wfSyslog OBJECT IDENTIFIER ::= { wfSyslogGroup 1 } wfSyslogDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag to indicate SYSLOG instance deletion If this flag is set to delete then the syslog subsystem and all associated MIB information will be deleted from the router." DEFVAL { created } ::= { wfSyslog 1 } wfSyslogDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables SYSLOG Subsystem Note: Even if this attribute is set to SYSLOG_BASE_ENABLED a remote host must be configured and enabled with associated enabled filters before the syslog subsystem will begin filtering and forwarding messages" DEFVAL { enabled } ::= { wfSyslog 2 } wfSyslogOperState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the actual stat of the syslog subsystem. If it is equal to SYSLOG_UP, then the subsystem is currently filtering and forwarding syslog messages. If it is SYSLOG_DOWN then it is not forwarding messages because of several possiblities: 1) No hosts are configured for the subsystem, 2) No hosts are enabled 3) Hosts are enabled but have no respective filters enabled" DEFVAL { down } ::= { wfSyslog 3 } wfSyslogMaxHosts OBJECT-TYPE SYNTAX INTEGER(1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Number of remote hosts allowed to be configured" DEFVAL { 5 } ::= { wfSyslog 4 } wfSyslogPollTimer OBJECT-TYPE SYNTAX INTEGER(5..610000) ACCESS read-write STATUS mandatory DESCRIPTION "Timer used to determine the iteration that log files are polled for new messages by the syslog application" DEFVAL { 5 } ::= { wfSyslog 5 } wfSyslogActTimeSeqHosts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to keep track of the current number of ACTIVE hosts configured for time sequencing. If a management station attempts to configure more hosts (wfSyslogTimeSeqHosts and wfSyslogNonSeqHosts) than wfSyslogMaxHosts allows, then the wfSyslogHostState for that host record will be set to SYSLOG_HOST_INACTIVE. " ::= { wfSyslog 6 } wfSyslogActNonSeqHosts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to keep track of the current number of ACTIVE hosts that are NOT configured for time sequencing. If a management station attempts to configure more hosts (wfSyslogTimeSeqHosts and wfSyslogNonSeqHosts) than wfSyslogMaxHosts allows, then the wfSyslogHostState for that host record will be set to SYSLOG_HOST_INACTIVE. " ::= { wfSyslog 7 } wfSyslogTotalMsgFwds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter used to track the total number of UDP syslog messages sent" ::= { wfSyslog 8 } wfSyslogHostTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSyslogHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing remote host records" ::= { wfSyslogGroup 2 } wfSyslogHostEntry OBJECT-TYPE SYNTAX WfSyslogHostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information concerning a specific remote host entry" INDEX { wfSyslogHostDest } ::= { wfSyslogHostTable 1 } WfSyslogHostEntry ::= SEQUENCE { wfSyslogHostDelete INTEGER, wfSyslogHostDisable INTEGER, wfSyslogHostDest IpAddress, wfSyslogHostUDPPort INTEGER, wfSyslogHostLogFacility INTEGER, wfSyslogHostTimeSeqEnable INTEGER, wfSyslogHostOperState INTEGER, wfSyslogHostMsgFwds Counter } wfSyslogHostDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag to indicate SYSLOG instance deletion If this flag is set to delete then it is the application's responsibility to delete the record and the respective filter table records" DEFVAL { created } ::= { wfSyslogHostEntry 1 } wfSyslogHostDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables syslog messaging for this remote host" DEFVAL { enabled } ::= { wfSyslogHostEntry 2 } wfSyslogHostDest OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address of the remote host" ::= { wfSyslogHostEntry 3 } wfSyslogHostUDPPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "UDP port of the remote host" DEFVAL { 514 } ::= { wfSyslogHostEntry 4 } wfSyslogHostLogFacility OBJECT-TYPE SYNTAX INTEGER { local0(128), local1(136), local2(144), local3(152), local4(160), local5(168), local6(176), local7(184) } ACCESS read-write STATUS mandatory DESCRIPTION "Facility type to use in encoding the priority of the syslog message LOG_LOCAL0 -> SYSLOG_LOG_FACILITY_LOCAL0 LOG_LOCAL1 -> SYSLOG_LOG_FACILITY_LOCAL1 . . LOG_LOCAL7 -> SYSLOG_LOG_FACILITY_LOCAL7" DEFVAL { local7 } ::= { wfSyslogHostEntry 5 } wfSyslogHostTimeSeqEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If wfSyslogLogTimeSeqEnable is set to enabled then the syslog application will transmit the messages to the remote host in time sequenced order(This is not guaranteed however because the UDP transport mechanism is connectionless, an thus, unreliable. The possibility exists for messages to be lost or delivered out of sequence ) If this attribute is disabled then messages will be sent to the remote host in the order that they occur on each slot( i.e. no aggragation of the messages across slots will be performed ) NOTE: If this value is changed while this host is enabled then the possiblity exists such that the remote host could receive duplicate log messages or worse log messages may not be sent to the remote host. The best procedure to follow would be to disable the the remote host's MIB record, then set this value and then enable this host's MIB record again." DEFVAL { disabled } ::= { wfSyslogHostEntry 6 } wfSyslogHostOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Used to track the state of the host record. If too many hosts are configured with entity filters then this value will be set to inactive by the syslog application." DEFVAL { inactive } ::= { wfSyslogHostEntry 7 } wfSyslogHostMsgFwds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter used to track the number of UDP syslog messages sent to this remote host" ::= { wfSyslogHostEntry 8 } wfSyslogEntityFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WfSyslogEntFltrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing filter records for associated remote hostss" ::= { wfSyslogGroup 3 } wfSyslogEntFltrEntry OBJECT-TYPE SYNTAX WfSyslogEntFltrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table is used to filter out messages by filtering them on a per entity basis, per remote host. This table is indexed with the remote host's IP address that is to receive the filtered messages, a value that represents the entity type to filter messages on and an entity filter index. All messages are passed through this filter table. If an instance of this table exists for a remote host, then a message will then be checked to see if the entity type of the message is equal to one specified in this table. If not then it is not forwarded. If it does equal the one specified in this table then the filters for that entity instance are applied to that message. Example: Entity Log Event Severity Slot Filter Type LWBnd UPBnd Mask LWBnd UPBnd ------- ----------- ------ ----------- 88(FTP) 2 8 '' 3 6 -->All FTP log msgs of value 2,3,4,5, 6,7,8 occurring on slots 3,4,5,6 will be forwarded 2( IP ) 0 255 'fw' 4 4 --> All IP log msgs of level fault and warning occurring on slot 4 will be forwarded ------------------------------------------------------------- NOTE: A wildcard entity filter will only be used if the there are no other 'non-wildcard' filters( i.e. IP, FTP etc. ) enabled for the wildcard entity filter's remote host. 255(WC) Ignored 'fwd' 4 5 --> All log msgs of level fault, warning and debug occurring on slots 4 and 5 will be forwarded " INDEX { wfSyslogEntFltrHostIndex, wfSyslogEntFltrNum, wfSyslogEntFltrIndex } ::= { wfSyslogEntityFilterTable 1 } WfSyslogEntFltrEntry ::= SEQUENCE { wfSyslogEntFltrDelete INTEGER, wfSyslogEntFltrDisable INTEGER, wfSyslogEntFltrHostIndex IpAddress, wfSyslogEntFltrNum INTEGER, wfSyslogEntFltrIndex INTEGER, wfSyslogEntFltrOperState INTEGER, wfSyslogEntFltrLogEvtLowBnd INTEGER, wfSyslogEntFltrLogEvtUppBnd INTEGER, wfSyslogEntFltrSevMask DisplayString, wfSyslogEntFltrSlotLowBnd INTEGER, wfSyslogEntFltrSlotUppBnd INTEGER, wfSyslogEntFltrFaultMap INTEGER, wfSyslogEntFltrWarningMap INTEGER, wfSyslogEntFltrInfoMap INTEGER, wfSyslogEntFltrTraceMap INTEGER, wfSyslogEntFltrDebugMap INTEGER, wfSyslogEntFltrName DisplayString } wfSyslogEntFltrDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A flag to indicate SYSLOG instance deletion If this flag is set to delete then it is the application's responsibility to delete the record and the respective filter table records" DEFVAL { created } ::= { wfSyslogEntFltrEntry 1 } wfSyslogEntFltrDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables or Disables syslog filtering for this entity record" DEFVAL { enabled } ::= { wfSyslogEntFltrEntry 2 } wfSyslogEntFltrHostIndex OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Remote Host IP address, used to associate this filter with a remote host in the SYSLOG_HOST_TABLE" ::= { wfSyslogEntFltrEntry 3 } wfSyslogEntFltrNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entity type to use as filter NOTE: Entities are listed with their numerical mappings in the documentation titled 'Event Messages for Wellfleet Routers' NOTE2: If entity type is WILDCARD(255) then the attributes wfSyslogEntFltrLogEvtLowBnd and wfSyslogEntFltrLogEvtUppBnd will be ignored and wfSyslogEntFltrSevMask will be used." ::= { wfSyslogEntFltrEntry 4 } wfSyslogEntFltrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Entity Filter Index. Used to distinguish filters of the same entity type" ::= { wfSyslogEntFltrEntry 5 } wfSyslogEntFltrOperState OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the actual stat of the syslog filter. If it is equal to SYSLOG_FILTER_ACTIVE, then the subsystem is currently filtering events against this filter. If it is SYSLOG_FILTER_INACTIVE then the subsystem is not filtering events against this filter because of several possiblities: 1) Filter's host is not activ, 2) Filter does not have event range configured 3) Filter does not have severity mask configured 4) Slot's residing in system do not fall within filter's slot range" DEFVAL { inactive } ::= { wfSyslogEntFltrEntry 6 } wfSyslogEntFltrLogEvtLowBnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Lower boundary for the log event entity filter, see SYSLOG_ENTITY_FILTER_TABLE for more complete description NOTE: Event numerical mappings are found in /include/<ENTITY>_edl.h" ::= { wfSyslogEntFltrEntry 7 } wfSyslogEntFltrLogEvtUppBnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Upper boundary for the log event entity filter, see SYSLOG_ENTITY_FILTER_TABLE for more complete description" DEFVAL { 255 } ::= { wfSyslogEntFltrEntry 8 } wfSyslogEntFltrSevMask OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Filter used to filter out log messages by error level (i.e. fault, informational, warning, trace and debug. This filter is used only if no values are specified for wfSyslogEntFltrLogEvtLowBnd, or if this entity type is of type WILDCARD(255)" ::= { wfSyslogEntFltrEntry 9 } wfSyslogEntFltrSlotLowBnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Lower boundary for the entity slot filter, see SYSLOG_ENTITY_FILTER_TABLE for more complete description" ::= { wfSyslogEntFltrEntry 10 } wfSyslogEntFltrSlotUppBnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Upper boundary for the entity slot filter, see SYSLOG_ENTITY_FILTER_TABLE for more complete description" ::= { wfSyslogEntFltrEntry 11 } wfSyslogEntFltrFaultMap OBJECT-TYPE SYNTAX INTEGER { emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Value to Map System Fault log messages to" DEFVAL { crit } ::= { wfSyslogEntFltrEntry 12 } wfSyslogEntFltrWarningMap OBJECT-TYPE SYNTAX INTEGER { emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Value to Map System Warning log messages to" DEFVAL { warning } ::= { wfSyslogEntFltrEntry 13 } wfSyslogEntFltrInfoMap OBJECT-TYPE SYNTAX INTEGER { emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Value to Map System Info log messages to" DEFVAL { info } ::= { wfSyslogEntFltrEntry 14 } wfSyslogEntFltrTraceMap OBJECT-TYPE SYNTAX INTEGER { emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Value to Map System Trace log messages to" DEFVAL { debug } ::= { wfSyslogEntFltrEntry 15 } wfSyslogEntFltrDebugMap OBJECT-TYPE SYNTAX INTEGER { emerg(1), alert(2), crit(3), err(4), warning(5), notice(6), info(7), debug(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Value to Map System Debug log messages to" DEFVAL { debug } ::= { wfSyslogEntFltrEntry 16 } wfSyslogEntFltrName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Text name supplied by the user for this filter. It will default so the entity name/index" ::= { wfSyslogEntFltrEntry 17 } END -- Wellfleet-SYSL-MIB