Wellfleet-T1-MIB.mib object view, vendor Wellfleet
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-T1-MIB and use it to monitor vendor specific OID's.
Wellfleet-T1-MIB file content
Object view of Wellfleet-T1-MIB:
| Scalar Object |
| wfT1Entry |
.1.3.6.1.4.1.18.3.4.10.1 |
|
An entry in the T1 table
|
| Tabular Object |
| wfT1Slot |
.1.3.6.1.4.1.18.3.4.10.1.4 |
|
instance ID Slot, filled in by driver
|
| wfT1Connector |
.1.3.6.1.4.1.18.3.4.10.1.5 |
|
instance ID Connector, filled in by driver
|
| wfT1Delete |
.1.3.6.1.4.1.18.3.4.10.1.1 |
|
create/delete parameter, dflt = created
|
| wfT1Disable |
.1.3.6.1.4.1.18.3.4.10.1.2 |
|
enable/disable parameter, dflt = enabled
|
| wfT1State |
.1.3.6.1.4.1.18.3.4.10.1.3 |
|
line driver state variable, Not Present, Init, Up
|
| wfT1Madr |
.1.3.6.1.4.1.18.3.4.10.1.6 |
|
Line mac address, filled in by driver
|
| wfT1FrameType |
.1.3.6.1.4.1.18.3.4.10.1.7 |
|
Frame Type - differentiates between two tarrifed framing formats
D4 and ESF.
|
| wfT1LineBuildout |
.1.3.6.1.4.1.18.3.4.10.1.8 |
|
Line Buildout - Approximate length of cable
|
| wfT1B8ZSSupport |
.1.3.6.1.4.1.18.3.4.10.1.9 |
|
B8ZS Support - Enables or disables Binary 8 zeros suppression
|
| wfT1ClockMode |
.1.3.6.1.4.1.18.3.4.10.1.10 |
|
Clock Mode - Specifies the source of the T1 transmit clock
|
| wfT1MiniDacs |
.1.3.6.1.4.1.18.3.4.10.1.11 |
|
MiniDacs Configuration - assigns each T1 channel to a specific
function
|
| wfT1BipolarVios |
.1.3.6.1.4.1.18.3.4.10.1.12 |
|
Number of Bipolar Violations
|
| wfT1FrameBitErrs |
.1.3.6.1.4.1.18.3.4.10.1.13 |
|
Number of frame bit errors
|
| wfT1OutOfFrameErrs |
.1.3.6.1.4.1.18.3.4.10.1.14 |
|
Number of Out of Frame errors
|
| wfT1SuperFrameErrs |
.1.3.6.1.4.1.18.3.4.10.1.15 |
|
Number of Superframe errors
|
| wfT1RcvYelAlarms |
.1.3.6.1.4.1.18.3.4.10.1.16 |
|
Number of Yellow Alarms Received
|
| wfT1RcvCarrierLoss |
.1.3.6.1.4.1.18.3.4.10.1.17 |
|
Number of instances of carrier loss
|
| wfT1RcvRedAlarms |
.1.3.6.1.4.1.18.3.4.10.1.18 |
|
Number of Red Alarm Received
|
| Table |
| wfT1Table |
.1.3.6.1.4.1.18.3.4.10 |
|
T1 line record
|
