ccrpNoCPCallTreatment |
.1.3.6.1.4.1.9.9.124.1.1.1.1 |
Value returned to the telco switch if call is to be
rejected because it doesn't match any defined customer
profile.
noAnswer(1) - ignore the call
busy(2) - return busy
|
ccrpNoResourceCallTreatment |
.1.3.6.1.4.1.9.9.124.1.1.1.2 |
Value returned to the telco switch if call is to be
rejected because there is no available resource to
answer the call.
channelNotAvailable(1) - return channel not available,
allowing switch to continue searching for
an available channel
busy(2) - return busy
|
ccrpDnisGroupEntry |
.1.3.6.1.4.1.9.9.124.1.1.2.1.1 |
An entry in the table, containing a single DNIS number
for the DNIS group identified by the first index.
A single DNIS number may not exist in more than one
DNIS group.
Entries in this table may be created and deleted via
the ccrpDnisGroupRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpDnisGroupRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpDnisGroupRowStatus to
'destroy'.
Deleting the last entry for a specific value of
ccrpDnisGroupName from this table will cause
associated entries in the dependent tables to
transition to a 'missingDependency' CiscoRowOperStatus.
|
ccrpDnisGroupCallTypeEntry |
.1.3.6.1.4.1.9.9.124.1.1.2.2.1 |
An entry in the table, identifying a call type to
assign to calls within the DNIS group.
Entries in this table may be created and deleted via
the ccrpDnisGroupCallTypeRowStatus object or the
management console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpDnisGroupCallTypeRowStatus to
'createAndGo' or 'createAndWait'. Rows are deleted by
a SET request setting the value of ccrpDnisGroupRowStatus
to 'destroy'.
Creating a new row with a value of ccrpDnisGroupName
which does not yet exist in ccrpDnisGroupTable will
cause the new row's ccrpDnisGroupCallTypeOperStatus
to have the value 'missingDependency'.
Existing rows may be modified when the row is active.
|
ccrpCallDiscriminatorEntry |
.1.3.6.1.4.1.9.9.124.1.1.3.1.1 |
An entry in the table, containing information about a
single call discriminator definition.
Entries in this table may be created and deleted via
the ccrpCDRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCDRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCDRowStatus to 'destroy'.
Deleting an entry from this table will cause
associated entries in dependent tables to transition
to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
|
ccrpCDDiscriminatedGrpEntry |
.1.3.6.1.4.1.9.9.124.1.1.3.2.1 |
Each entry identifies a group to be discriminated
by the call discriminator. There may be multiple
entries for the same call discriminator name.
The same [group name, group type] pair may appear
under multiple call discriminators.
Entries in this table may be created and deleted via
the ccrpCDDiscriminatedGroupRowStatus object or the
management console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCDDnisGroupRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCDDnisGroupRowStatus to
'destroy'.
Creating a new row with a value of ccrpCDName which
does not yet exist in ccrpCallDiscriminatorTable will
cause the new row's ccrpCDDiscriminatedGroupOperStatus
to have the value 'missingDependency'.
|
ccrpResourceEntry |
.1.3.6.1.4.1.9.9.124.1.1.4.1.1 |
An entry in the table, containing definition for
a single resource group.
Entries in this table may be created and deleted via
the ccrpResourceGroupRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpResourceGroupRowStatus to
'createAndGo' or 'createAndWait'. Rows are deleted by a
SET request setting the value of
ccrpResourceGroupRowStatus to 'destroy'.
Deleting an entry from this table will cause
associated entries in dependent tables to transition
to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
|
ccrpResourceRangeEntry |
.1.3.6.1.4.1.9.9.124.1.1.4.2.1 |
An entry in the table, containing definition for
a single physical resource range.
Each entry specifies a contiguous range of individual
resources using start and end identification.
The individual resources within a range must be of the
same type and capabilities.
Entries in this table may be created and deleted via
the ccrpResourceRangeRangeRowStatus object or the
management console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpResourceRangeRowStatus to
'createAndGo' or 'createAndWait'. Rows are deleted by a
SET request setting the value of
ccrpResourceRangeRowStatus to 'destroy'.
Deleting the last entry for a specific value of
ccrpResourceName from this table will cause
the associated entry in the dependent ccrpResourceTable
to transition to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
|
ccrpCustomerProfileEntry |
.1.3.6.1.4.1.9.9.124.1.1.5.1.1 |
An entry in the table, containing information about a
single customer profile.
Entries in this table may be created and deleted via
the ccrpCPRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPRowStatus to 'destroy'.
Deleting an entry from this table will cause
associated entries in dependent tables to transition
to a 'missingDependency' CiscoRowOperStatus.
Existing rows may be modified when the row is active.
|
ccrpCPDnisGrpEntry |
.1.3.6.1.4.1.9.9.124.1.1.5.2.1 |
Each entry identifying a DNIS group for customer
profile. There may be multiple entries for the
same customer profile name. A single DNIS group may
not be associated with more than one customer profile.
Entries in this table may be created and deleted via
the ccrpCPDnisGroupRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPDnisGroupRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPDnisGroupRowStatus to
'destroy'.
Creating a new row with values of ccrpCPName or
ccrpDnisGroupName which do not yet exist in
ccrpCustomerProfileTable or ccrpDnisGroupTable
respectively will cause the new row's
ccrpCPDnisGroupOperStatus to have the value
'missingDependency'.
Existing rows may be modified when the row is active.
|
ccrpCPResourceGrpEntry |
.1.3.6.1.4.1.9.9.124.1.1.5.3.1 |
Each entry identifying a resource group for a customer
profile. There may be multiple resource group entries
for the same customer profile name. A single resource
group may be associated with more than one customer
profile.
Entries in this table may be created and deleted via
the ccrpCPResourceRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPResourceRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPResourceRowStatus to
'destroy'.
Creating a new row with values of ccrpCPName or
ccrpResourceName which do not yet exist in
ccrpCustomerProfileTable or ccrpResourceTable
respectively will cause the new row's
ccrpCPDnisGroupOperStatus to have the value
'missingDependency'.
Existing rows may be modified when the row is active.
|
ccrpCPVGEntry |
.1.3.6.1.4.1.9.9.124.1.1.5.4.1 |
Each entry identifies a VPDN group for a customer
profile.
Each customer profile may have multiple VPDN groups
associated with it.
A VPDN group may be associated with more than one
customer profile.
Entries in this table may be created and deleted via
the ccrpCPVGRowStatus object or the management
console on the system.
Using SNMP, rows are created by a SET request setting
the value of ccrpCPVGRowStatus to 'createAndGo'
or 'createAndWait'. Rows are deleted by a SET request
setting the value of ccrpCPVGRowStatus to 'destroy'.
Creating a new row with a value of ccrpCPName
which does not yet exist in ccrpCustomerProfileTable
or a value of ccrpCPVGName which has not been
configured will cause the new row's
ccrpCPDnisGroupOperStatus to have the value
'missingDependency'.
Existing rows may be modified when the row is active.
|
ccrpCPStatisticsEntry |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1 |
An entry in the table, containing statistics about a
single customer profile.
An entry is created for each customer profile within
the ccrpCustomerProfileTable.
|
ccrpDnisStatisticsTableMaxEntries |
.1.3.6.1.4.1.9.9.124.1.2.2.1 |
The limit on the number of entries that the
ccrpDnisStatisticsTable may contain.
When this table is full, any new DNIS values will be
ignored.
A value of 0 will prevent any DNIS statistics from being
retained. If this value is set to 0 after entries already
exist in the table, those entries will be deleted.
Reducing the value will truncate the table based on the
sort order of the index.
The range for this value is from 0 to a system specific
number specified by ccrpDnisStatisticsTableSystemMax.
|
ccrpDnisStatisticsTableSystemMax |
.1.3.6.1.4.1.9.9.124.1.2.2.2 |
The system specific limit on the number of entries
that the ccrpDnisStatisticsTable may contain.
This is the maximum value that will be accepted for
ccrpDnisStatisticsTableMaxEntries.
|
ccrpDnisStatisticsTableLengthExceeded |
.1.3.6.1.4.1.9.9.124.1.2.2.3 |
The number of times a new DNIS has been ignored due to
the ccrpDnisStatisticsTableMaxLength having been reached
since last system re-initialization.
When the table is full, this counter is incremented
both for each new DNIS arriving, as well as every time
the same DNIS arrives.
|
ccrpDnisStatisticsEntry |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1 |
An entry in the table, containing session counts
for a single DNIS number.
The DNIS does not need to be a member of a DNIS
group or be associated with a customer profile to
appear in this table.
Entries are created as a result of a call being
received by the system with the DNIS number.
|
ccrpCDStatisticsEntry |
.1.3.6.1.4.1.9.9.124.1.2.3.1.1 |
An entry in the table, containing statistics about a
single call discriminator definition.
An entry is created for each call discriminator within
the ccrpCallDiscriminatorTable.
|
ccrpDnisGroupName |
.1.3.6.1.4.1.9.9.124.1.1.2.1.1.1 |
Name for this DNIS group
|
ccrpDnisGroupMember |
.1.3.6.1.4.1.9.9.124.1.1.2.1.1.2 |
DNIS for member of this DNIS group.
A single DNIS number may not be a member of
more than one DNIS group.
Creating a new entry using a DNIS number that
already exists will fail. The existing entry must
be removed first, before creating a new entry under
a different DNIS group name.
|
ccrpDnisGroupRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.2.1.1.3 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpDnisGroupCallType |
.1.3.6.1.4.1.9.9.124.1.1.2.2.1.1 |
Call type to assign to calls arriving with
DNIS number in this entry's DNIS group.
|
ccrpDnisGroupCallTypeOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.2.2.1.2 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in
ccrpDnisGroupTable.
|
ccrpDnisGroupCallTypeRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.2.2.1.3 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCDName |
.1.3.6.1.4.1.9.9.124.1.1.3.1.1.1 |
Name for this call discriminator definition
|
ccrpCDCallType |
.1.3.6.1.4.1.9.9.124.1.1.3.1.1.2 |
Indicates types of calls to be filtered by this
call discriminator definition.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates that call type is filtered.
A 0-bit indicates that call type is not filtered.
Bit 0 - Digital
Bit 1 - Speech
Bit 2 - V.110
Bit 3 - V.120
Setting all defined bits to 1 would result in all calls
being rejected by this call discriminator.
Setting all defined bits to zero would result in all
calls being accepted by this discriminator.
|
ccrpCDRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.3.1.1.3 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCDDiscriminatedGroupName |
.1.3.6.1.4.1.9.9.124.1.1.3.2.1.1 |
Name for the group being discriminated
If this is a DNIS group, the value of this object
is the same as some value of ccrmDnisGroupName.
|
ccrpCDDiscriminatedGroupType |
.1.3.6.1.4.1.9.9.124.1.1.3.2.1.2 |
Indicates type of group being discriminated and
the table where the value of ccrpCDDiscriminatedGroupName
is defined.
dnis(1) - DNIS Group. Value in
ccrpCDDiscriminatedGroupName is same as
value of ccrpDnisGroupName in the
ccrpDnisGroupTable.
|
ccrpCDDiscriminatedGroupOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.3.2.1.3 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is currently only dependent on entries in
ccrpDnisGroupTable.
|
ccrpCDDiscriminatedGroupRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.3.2.1.4 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
associated entries in other tables are also active.
All values of RowStatus are allowed.
|
ccrpResourceName |
.1.3.6.1.4.1.9.9.124.1.1.4.1.1.1 |
Name for this physical resource
|
ccrpResourcePortBased |
.1.3.6.1.4.1.9.9.124.1.1.4.1.1.2 |
Indicates if the resources within this group are
are port-based or not.
Instantiating this with a value of false will also
instantiate ccrpResourceLimit.
|
ccrpResourceLimit |
.1.3.6.1.4.1.9.9.124.1.1.4.1.1.3 |
Specifies the size of this resource group for
non-port based resources.
This object is not instantiated for port-based
resources.
|
ccrpResourceGroupOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.4.1.1.4 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in ccrpResourceRangeTable
if the value of ccrpResourcePortBased is true.
|
ccrpResourceGroupRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.4.1.1.5 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpResourceRangeIndex |
.1.3.6.1.4.1.9.9.124.1.1.4.2.1.1 |
Index for this physical resource range within the
resource group.
|
ccrpResourceRangeStartPort |
.1.3.6.1.4.1.9.9.124.1.1.4.2.1.2 |
Range start for specifying resources within
this range.
The allowable values for each field within this
object is system specific.
The default value is
slot 0, port 0
|
ccrpResourceRangeEndPort |
.1.3.6.1.4.1.9.9.124.1.1.4.2.1.3 |
Range end for specifying resources within
this range.
The allowable values for each field within this
object is system specific.
The default value is
slot 0, port 0
|
ccrpResourceRangeOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.4.2.1.4 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in
ccrpResourceGroupTable.
|
ccrpResourceRangeRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.4.2.1.5 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCPName |
.1.3.6.1.4.1.9.9.124.1.1.5.1.1.1 |
Name for this Customer Profile
|
ccrpCPSessionLimit |
.1.3.6.1.4.1.9.9.124.1.1.5.1.1.2 |
Simultaneous sessions limit for this customer profile.
This is a soft limit if overflow is allowed as
indicated in the object ccrpCPOverflow.
The allowable value range is platform specific.
|
ccrpCPOverflow |
.1.3.6.1.4.1.9.9.124.1.1.5.1.1.3 |
Number of simultaneous sessions allowed over the
value specified in ccrpCPSessionLimit.
If this value is zero, no overflow is allowed and
ccrpCPSessionLimit is a hard limit.
If this value is -1, the is no overflow limit. All
calls will be accepted, up to the exhaustion of
system resources.
The allowable value range is platform specific.
|
ccrpCPRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.1.1.4 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCPDnisGroupOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.2.1.1 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in
ccrpDnisGroupTable and ccrpCustomerProfileTable.
|
ccrpCPDnisGroupRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.2.1.2 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCPResourceCallType |
.1.3.6.1.4.1.9.9.124.1.1.5.3.1.1 |
Indicates types of calls to assign to this resource
for this customer profile.
This object is a bit map, with each bit representing
a different call type as identified below.
A 1-bit indicates that call type is supported.
A 0-bit indicates that call type is not supported.
Bit 0 - Digital
Bit 1 - Speech
Bit 2 - V.110
Bit 3 - V.120
Setting all defined bits to 1 would result in this
resource being available for all calls.
Setting all defined bits to zero would result no
calls being assigned to this resource.
Q.931 specifies Bearer Capability associated with calls.
RFC 2127, ISDN MIB defines the object isdnBearInfoType,
combining Q.931 bearer capability information
transfer capability and user rate.
The correlation between Q.931 information transfer capability
and call types is:
Call Type Q.931
--------- -----
digital = {unrestricted digital, restricted digital}
speech = {speech, 3.1kHz audio, 7kHz audio}
v110 = {Anything with V.110 User Info Layer}
v120 = {Anything with V.120 User Info Layer}
The Q.931 user info layer values of V.110 or V.120 override
all other fields in determining resource manager call types.
The remaining Q.931 transfer capabilities are not currently
supported by resource manager.
The mapping for RFC2127 is:
Call Type RFC2127
--------- -------
digital = {unrestrictedDigital,unrestrictedDigital56,
restrictedDigital}
speech = {speech, audio31, audio7}
v110 = {Not represented in RFC2127}
v120 = {Not represented in RFC2127}
The remaining RFC2127 values are not currently
supported by resource manager.
|
ccrpCPResourceServiceProfileName |
.1.3.6.1.4.1.9.9.124.1.1.5.3.1.2 |
Name of service profile to apply to this resource
whenever a new call matching the CP is assigned to
the resource.
Service profiles are defined via the management
console on the system.
Assigning a service profile is optional.
|
ccrpCPResourceOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.3.1.3 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in ccrpResourceTable
and ccrpCustomerProfileTable.
|
ccrpCPResourceRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.3.1.4 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCPVGName |
.1.3.6.1.4.1.9.9.124.1.1.5.4.1.1 |
Name for VPDN group for this customer profile.
|
ccrpCPVGOperStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.4.1.2 |
A control object to indicate the operational status
of this entry. This object is used to determine that
the dependencies for this entry are valid and active.
This entry is dependent on entries in the
ccrpCustomerProfileTable and VPDN group in system
configuration.
|
ccrpCPVGRowStatus |
.1.3.6.1.4.1.9.9.124.1.1.5.4.1.3 |
The status of this conceptual row.
An entry may not exist in the active(1) state unless
all objects in the entry have an appropriate value.
All values of RowStatus are allowed.
|
ccrpCPActiveSessions |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.1 |
Number of active sessions for this customer profile.
|
ccrpCPActiveOverflowSessions |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.2 |
Number of active sessions which are overflow sessions
for this customer profile.
Overflow sessions are those calls which arrived and
were accepted when the customer profile's
ccrpCPActiveSessions >= ccrpCPSessionLimit.
|
ccrpCPTotalSessions |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.3 |
Total number of sessions for this customer profile
since last system re-initialization.
Includes non-overflow and overflow sessions.
Includes all calls which were answered, including those
which may have been terminated due to post-answer
resource restrictions or authorization failures.
|
ccrpCPTotalOverflowSessions |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.4 |
Total number of overflow sessions for this customer
profile since last system re-initialization.
Includes all calls which were answered and identified
as overflow sessions, including those which may have
been terminated due to post-answer resource limits
or authorization failures.
|
ccrpCPNumberOverflowState |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.5 |
Number of times this customer profile has been in
an overflow state since last system re-initialization.
The customer profile is in overflow state when
ccrpCPActiveSessions > ccrpCPSessionLimit.
If overflow is not allowed for this profile, this value
is always zero.
|
ccrpCPNumberMaxState |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.6 |
Number of times this customer profile has reached
its maximum allowed active sessions, including
overflow sessions since last system re-initialization.
The customer profile is in maximum state under the
following conditions:
Overflow allowed and limited
ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize.
Overflow not allowed
ccrpCPActiveSessions = ccrpCPSessionLimit.
If overflow is allowed, but not limited by
ccrpCPOverflow, this value will always be
zero.
|
ccrpCPOverflowTime |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.7 |
The amount of time that this customer profile has been
in overflow state since last system re-initialization.
The customer profile is in overflow state when
ccrpCPActiveSessions > ccrpCPSessionLimit.
|
ccrpCPMaxStateTime |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.8 |
The amount of time that this customer profile has reached
its maximum allowed active sessions since last system re-
initialization.
The customer profile is in maximum state under the
following conditions:
Overflow allowed and limited
ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflowSize.
Overflow not allowed
ccrpCPActiveSessions = ccrpCPSessionLimit.
If overflow is allowed, but not limited by
ccrpCPOverflow, this value will always be
zero.
|
ccrpCPPeakActiveSessions |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.9 |
The maximum number of active sessions which has
occurred for this customer profile since last system
re-initialization. This is the maximum value of
ccrpCPActiveSessions since last system
re-initialization.
This includes non-overflow and overflow sessions.
The peak value for the overflow sessions may be
computed by subtracting the value of ccrpCPSessionLimit
from this value.
|
ccrpCPOverflowRejected |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.10 |
Number of calls rejected due to exceeding allowed
simultaneous sessions for this customer
profile since last system re-initialization.
If overflow is not allowed for this profile, this
counts the number of times calls arrived when
ccrpCPActiveSessions = ccrpCPSessionLimit.
If overflow is allowed, this counts the number of
time calls arrived when
ccrpCPActiveSessions = ccrpCPSessionLimit + ccrpCPOverflow.
If overflow is allowed, but not limited by
ccrpCPOverflow, this value is always zero.
Includes calls which were answered, then terminated
due to post-answer session counting restrictions for
the customer profile. Does not include calls
terminated due to post-answer resource limits or
post-answer authorization failures beyond customer
profile authorizations.
|
ccrpCPResourceRejected |
.1.3.6.1.4.1.9.9.124.1.2.1.1.1.11 |
Number of calls rejected due to unavailable resources
for this customer profile since last system
re-initialization.
Includes calls which were answered then terminated due
to post-answer resource restrictions.
|
ccrpDnisStatisticsDnisNumber |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1.1 |
DNIS associated with call
|
ccrpDnisStatisticsGroupName |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1.2 |
Name of DNIS group containing this DNIS. Value
corresponds to ccrpDnisGroupName.
If DNIS is not a member of a DNIS group, this value
is a zero-length string.
|
ccrpDnisActiveSessions |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1.3 |
Number of active sessions for this DNIS in the
customer profile.
Includes non-overflow and overflow sessions.
|
ccrpDnisTotalSessions |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1.4 |
Total number of sessions for this DNIS in the
customer profile since last system re-initialization.
Includes non-overflow and overflow sessions.
Includes all calls which were answered then terminated
by post-answer restrictions for authorization
failures.
|
ccrpDnisPeakActiveSessions |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1.5 |
The maximum number of active sessions which has
occurred for this DNIS since last system
re-initialization.
Includes non-overflow and overflow sessions.
|
ccrpDnisCallTypeRejected |
.1.3.6.1.4.1.9.9.124.1.2.2.4.1.6 |
Number of calls with this DNIS which were rejected
due to call type mismatch, as defined in the
ccrpCallDiscriminatorTable, since last system
re-initialization.
|
ccrpCDRejected |
.1.3.6.1.4.1.9.9.124.1.2.3.1.1.1 |
Number of calls rejected due to matching this call
discriminator definition, as defined in the
ccrpCallDiscriminatorTable, since last system
re-initialization.
|