CISCO-PAE-MIB.mib object view, vendor cisco
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CISCO-PAE-MIB and use it to monitor vendor specific OID's.
CISCO-PAE-MIB file content
Object view of CISCO-PAE-MIB:
| Scalar Object |
| cpaePortEntry |
.1.3.6.1.4.1.9.9.220.1.1.1 |
|
An entry containing additional management information
applicable to a particular PAE port.
|
| cpaeGuestVlanId |
.1.3.6.1.4.1.9.9.220.1.2 |
|
Specifies the Guest Vlan of the system. An interface will
be moved to Guest Vlan if its access is unsuccessfully
authenticated. A value of zero indicates no Guest Vlan
configured in the system.
If the platform supports per-port guest Vlan ID configuration,
this object is not instantiated.
|
| cpaeShutdownTimeout |
.1.3.6.1.4.1.9.9.220.1.3 |
|
Specifies the shutdown timeout interval to enable the interface
automatically in case it is shutdown due to security violation.
If the value of this object is 0, the interfaces shutdown due
to the security violation will not be enabled automatically.
The value of this object is applicable to the interface only
when cpaeShutdownTimeoutEnabled is 'true', and port security
feature is disabled on the interface.
|
| cpaeRadiusAccountingEnabled |
.1.3.6.1.4.1.9.9.220.1.4 |
|
Specifies if RADIUS accounting is enabled for 802.1x on
this devices.
|
| cpaeUserGroupEntry |
.1.3.6.1.4.1.9.9.220.1.5.1 |
|
Information about an 802.1x authenticated user on the
devices.
|
| Tabular Object |
| cpaeMultipleHost |
.1.3.6.1.4.1.9.9.220.1.1.1.1 |
|
Specifies whether the port allows multiple-host connection
or not.
|
| cpaePortMode |
.1.3.6.1.4.1.9.9.220.1.1.1.2 |
|
Specifies the current mode of dot1x operation on the port.
- singleHost(1): port allows one host to connect and
authenticate.
- multiHost(2) : port allows multiple hosts to connect.
Once a host is authenticated, all remaining hosts
are also authorized.
- multiAuth(3) : port allows multiple hosts to connect
and each host is authenticated.
If the port security feature is enabled on the interface, the
configuration of the port security (such as the number of the
hosts allowed, the security violation action, etc)will apply
to the interface.
|
| cpaeGuestVlanNumber |
.1.3.6.1.4.1.9.9.220.1.1.1.3 |
|
Specifies the Guest Vlan of the interface. An interface will
be moved to its Guest Vlan if its access is unsucessfully
authenticated. A value of zero indicates no Guest Vlan
configured for the interface.
|
| cpaeInGuestVlan |
.1.3.6.1.4.1.9.9.220.1.1.1.4 |
|
Indicates whether the interface is in its Guest Vlan or
not.
|
| cpaeShutdownTimeoutEnabled |
.1.3.6.1.4.1.9.9.220.1.1.1.5 |
|
Specifies whether shutdown timeout feature is enabled on the
interface.
|
| cpaeUserGroupName |
.1.3.6.1.4.1.9.9.220.1.5.1.1 |
|
Specifies the name of the group that the user belongs to.
|
| cpaeUserGroupUserIndex |
.1.3.6.1.4.1.9.9.220.1.5.1.2 |
|
The index of an user within a group.
|
| cpaeUserGroupUserName |
.1.3.6.1.4.1.9.9.220.1.5.1.3 |
|
Specifies the name of the user authenticated on a port of
the device.
|
| cpaeUserGroupUserAddrType |
.1.3.6.1.4.1.9.9.220.1.5.1.4 |
|
Specifies the type of address used to determine the address
of the user.
|
| cpaeUserGroupUserAddr |
.1.3.6.1.4.1.9.9.220.1.5.1.5 |
|
Specifies the address of the host that the user logging
from.
|
| cpaeUserGroupUserInterface |
.1.3.6.1.4.1.9.9.220.1.5.1.6 |
|
Specifies the interface index that the user is authenticated
on.
|
| cpaeUserGroupUserVlan |
.1.3.6.1.4.1.9.9.220.1.5.1.7 |
|
Specifies the vlan that the user belongs to.
|
| Table |
| cpaePortTable |
.1.3.6.1.4.1.9.9.220.1.1 |
|
A table of system level information for each port
supported by the Port Access Entity. An entry
appears in this table for each PAE port of this system.
This table contains additional objects for the
dot1xPaePortTable.
|
| cpaeUserGroupTable |
.1.3.6.1.4.1.9.9.220.1.5 |
|
A table of Group Manager and authenticated users information
on the device.
|
| Object Identifier |
| ciscoPaeMIB |
.1.3.6.1.4.1.9.9.220 |
|
Cisco Port Access Entity (PAE) module for managing
IEEE Std 802.1x.
This MIB provides Port Access Entity information that are
either excluded by IEEE Std 802.1x (IEEE8021-PAE-MIB) or
specific to Cisco products.
|
| cpaeMIBNotification |
.1.3.6.1.4.1.9.9.220.0 |
| cpaeMIBObject |
.1.3.6.1.4.1.9.9.220.1 |
| cpaeMIBConformance |
.1.3.6.1.4.1.9.9.220.2 |
| cpaeMIBCompliances |
.1.3.6.1.4.1.9.9.220.2.1 |
| cpaeMIBGroups |
.1.3.6.1.4.1.9.9.220.2.2 |
| Group |
| cpaeMultipleHostGroup |
.1.3.6.1.4.1.9.9.220.2.2.1 |
|
A collection of objects that provide the multiple
host configuration information for a PAE port.
These are additional to the IEEE Std 802.1x PAE MIB.
|
| cpaePortEntryGroup |
.1.3.6.1.4.1.9.9.220.2.2.2 |
|
A collection of objects that provides the port-mode
configuration for a PAE port.
|
| cpaeGuestVlanGroup |
.1.3.6.1.4.1.9.9.220.2.2.3 |
|
A collection of objects that provides the Guest Vlan
configuration information for the system.
|
| cpaeGuestVlanGroup2 |
.1.3.6.1.4.1.9.9.220.2.2.4 |
|
A collection of objects that provides the per-interface
Guest Vlan configuration information for the system.
|
| cpaeShutdownTimeoutGroup |
.1.3.6.1.4.1.9.9.220.2.2.5 |
|
A collection of objects that provides the dot1x shutdown
timeout configuration information for the system.
|
| cpaeRadiusConfigGroup |
.1.3.6.1.4.1.9.9.220.2.2.6 |
|
A collection of objects that provides the RADIUS
configuration information for the system.
|
| cpaeUserGroupGroup |
.1.3.6.1.4.1.9.9.220.2.2.7 |
|
A collection of objects that provides the group manager
information of authenticated users in the system.
|
