CTRON-SFPS-DIAGSTATS-MIB device MIB details by Enterasys Networks Inc

CTRON-SFPS-DIAGSTATS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SFPS-DIAGSTATS-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SFPS-DIAGSTATS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SFPS-DIAGSTATS-MIB DEFINITIONS ::= BEGIN

--  sfps-diagstats-mib.txt
--  Revision: 0.0.03
--              
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com
--
--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services API MIB.
--
--  This module will be extended, as required.
--
--
--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
--      DisplayString
--                FROM RFC1213-MIB
--  tcl    enterprises
--         IpAddress,
--       Counter, Gauge
         TimeTicks
                FROM RFC1155-SMI
 
--  These Objects are defined in the file sfps-inc.mib.txt.0.0.2
        sfpsFloodCounters, sfpsFloodCountersReset, sfpsIsolatedSwitch, sfpsResetNVRAM
                FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
--  this will map to chassis.module index value
 
--SfpsSwitchPort ::= INTEGER
--  this will map to chassis.module.portgroup.portsubgroup.port index value
 
SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address
  
--HexInteger ::= INTEGER
--  display this integer in hex format



--  SFPS Diagnostic Statistics Group

sfpsFloodCountersTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsFloodCountersEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "A table of flood count information."
        ::= { sfpsFloodCounters 1 }

sfpsFloodCountersEntry    OBJECT-TYPE
        SYNTAX  SfpsFloodCountersEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry is instanced by the Source MAC address."
        INDEX   { sfpsFloodCountersSource }
                ::= { sfpsFloodCountersTable 1 }

SfpsFloodCountersEntry ::=
        SEQUENCE {
                sfpsFloodCountersSource               SfpsAddress,  
                sfpsFloodCountersNumFloods            INTEGER,  
                sfpsFloodCountersLastSeqNum           INTEGER,  
                sfpsFloodCountersNumDrops             INTEGER,  
                sfpsFloodCountersLastDropTime         TimeTicks,  
                sfpsFloodCountersMaxDrops             INTEGER,  
                sfpsFloodCountersMaxDropsTime         TimeTicks
        }  

sfpsFloodCountersSource   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Source Mac Address."
        ::= { sfpsFloodCountersEntry 1 }

sfpsFloodCountersNumFloods   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number of floods caused by this Source MAC."
        ::= { sfpsFloodCountersEntry 2 }


sfpsFloodCountersLastSeqNum   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Last Sequence number."
        ::= { sfpsFloodCountersEntry 3 }


sfpsFloodCountersNumDrops   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number of drops for that Source MAC.."
        ::= { sfpsFloodCountersEntry 4 }


sfpsFloodCountersLastDropTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time tick on when the last drop occurred for that 
                Source MAC.."
        ::= { sfpsFloodCountersEntry 5 }


sfpsFloodCountersMaxDrops   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Maximum drops for that Source MAC."
        ::= { sfpsFloodCountersEntry 6 }

sfpsFloodCountersMaxDropsTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time tick on when the maximum drops occurred
                for that Source MAC."
        ::= { sfpsFloodCountersEntry 7 }


-- Flood Counters Reset

sfpsFloodCountersResetReset             OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        "Reset the Flood counters (1 to reset)."
    ::= { sfpsFloodCountersReset 1 }

sfpsFloodCountersTotalDropped           OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Total number of drops based on sequence numbers for the switch."
    ::= { sfpsFloodCountersReset 2 }

sfpsFloodCountersTotalRunts             OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Total number of runt packets originated from the Flooder."
    ::= { sfpsFloodCountersReset 3 }

sfpsFloodCountersTotalSelfOrig          OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Total number of floods that the switch sees that were generated
        from itself."
    ::= { sfpsFloodCountersReset 4 }

sfpsFloodCountersNonNetPort             OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Total number of floods received on non-Network ports."
    ::= { sfpsFloodCountersReset 5 }


-- Isoloated Switch

sfpsIsolatedSwitchIsolatedSwitch                OBJECT-TYPE
    SYNTAX      INTEGER {
--              no(0),
                yes(1)
        }
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Designates whether this switch has determined that it is an
        Isolated switch."
    ::= { sfpsIsolatedSwitch 1 }

sfpsIsolatedSwitchResetCounters         OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        "Clears the INBDropped and INBNotSent counters."
    ::= { sfpsIsolatedSwitch 2 }

sfpsIsolatedSwitchINBDropped            OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "During the time that switch has not converged, this number should
        increment. It should not increment once things are stable."
    ::= { sfpsIsolatedSwitch 3 }

sfpsIsolatedSwitchINBNotSent            OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Number of times the packet not sent out the INB. Used for debugging    
        purposes."
    ::= { sfpsIsolatedSwitch 4 }

-- Reset NVRAM

sfpsResetNVRAMPercentNvramAvailable      OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Percent of Nvram available."
    ::= { sfpsResetNVRAM 1 }

sfpsResetNVRAMTotalNVRAM      OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "Total amount of Nvram."
    ::= { sfpsResetNVRAM 2 }

sfpsResetNVRAMOnetoResetNvramAndRestoreIP      OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        ""
    ::= { sfpsResetNVRAM 3 }

sfpsResetNVRAMDelayTimer      OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        ""
    ::= { sfpsResetNVRAM 4 }

END