CISCO-VISM-PORT-MIB.mib object view, vendor Stratacom

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file CISCO-VISM-PORT-MIB and use it to monitor vendor specific OID's.

CISCO-VISM-PORT-MIB file content

Object view of CISCO-VISM-PORT-MIB:

Scalar Object
vismPortCnfGrpEntry	.1.3.6.1.4.1.351.110.5.5.2.1.1.1
An entry for logical port.
Tabular Object
vismPortNum	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.1
This is a logical port number. If PXM1 (Processor Switch Module) is the PXM used on the shelf this object should be set to 1. For PXM1E this object should be set to 255.
vismPortRowStatus	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.2
The object add, delete or modify a port. 'add' - add a port, a port acn only be added if the status is in 'del'. 'del' - delete a port, once a port is deleted the status is chane to 'del'. The port can only be deleted after deleting all the connections and the resource partition. 'mod' - modify a port and change status to 'mod'.
vismPortLineNum	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.3
This represents the line number to which this port is associated. Since the network port is not associated with any line, line number 0 is returned on a GET.
vismPortType	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.4
The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2.
vismPortDs0ConfigBitMap	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.5
This respesents the bit map of DS0s which is used to create this port. Bit 0 represents DS0-1. Since this object is not applicable to the network port, value 0 is returned on a GET.
vismPortSpeed	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.6
The speed of the port in cells per second. It is used by VISM card to advertise virtual port bandwidth to the controller, SVC(Switched Virtual Circuit) and PVC(Permanent Virtual Circuit) connection admission control and aggregate traffic clipping. This object can be modified only when there is no existing resource partition on the port.
vismPortState	.1.3.6.1.4.1.351.110.5.5.2.1.1.1.7
This object indicates the state of the port.
Table
vismPortCnfGrpTable	.1.3.6.1.4.1.351.110.5.5.2.1.1
Port configuration table for the virtual port. Only one entry is allowed in this table.
Object Identifier
ciscoVismPortMIB	.1.3.6.1.4.1.351.150.92
The MIB module containing Port information for VISM service module.
vismPortCnfGrp	.1.3.6.1.4.1.351.110.5.5.2.1
ciscoVismPortMIBConformance	.1.3.6.1.4.1.351.150.92.2
ciscoVismPortMIBGroups	.1.3.6.1.4.1.351.150.92.2.1
ciscoVismPortMIBCompliances	.1.3.6.1.4.1.351.150.92.2.2
Group
ciscoVismPortGroup	.1.3.6.1.4.1.351.150.92.2.1.1
The collection of objects which are used to represent VISM Port information.