CISCO-WAN-ATM-CONN-CAPABILITY device MIB details by Cisco

CISCO-WAN-ATM-CONN-CAPABILITY file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CISCO-WAN-ATM-CONN-CAPABILITY.

Vendor:	Cisco
Mib:	CISCO-WAN-ATM-CONN-CAPABILITY  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- *****************************************************************
-- CISCO-WAN-ATM-CONN-CAPABILITY MIB
--
-- AGENT-CAPABILITIES MIB for CISCO-WAN-ATM-CONN-MIB.
--
-- February 2004, Rajesh Goudar
--
-- Copyright(c) 2002,2004 by Cisco Systems,Inc.
--
-- *****************************************************************

CISCO-WAN-ATM-CONN-CAPABILITY DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        Unsigned32
                FROM SNMPv2-SMI
        AGENT-CAPABILITIES
                FROM SNMPv2-CONF
        ciscoAgentCapability
                FROM CISCO-SMI;   

ciscoWanAtmConnCapability MODULE-IDENTITY
        LAST-UPDATED    "200402070000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems
                        Customer Service

                Postal: 170 W Tasman Drive
                        San Jose, CA  95134
                        USA

                        Tel: +1 800 553-NETS

                E-mail: cs-wanatm@cisco.com"
        DESCRIPTION
                "The agent capabilities for CISCO-WAN-ATM-CONN-MIB
		 in MGX8800 Series.
                 - The capability cwAtmConnCapabilityAxsmV2R0160
                   is for AXSM in MGX Release 2.1.60.
                 - The capability cwAtmConnCapabilityAxsmeV2R0160
                   is for AXSM-E in MGX Release 2.1.60.
                 - The capability cwAtmConnCapabilityRpmprV2R0160
                   is for RPM-PR in MGX Release 2.1.60.
                 - The capability cwAtmConnCapabilityBpxsesV3R00 
                   is for AXSM in MGX Release 3.0.00.
                 - The capability cwAtmConnCapabilityAxsmV3R00 
                   is for AXSM in MGX Release 3.0.00.
                 - The capability cwAtmConnCapabilityAxsmeV3R00 
                   is for AXSM-E in MGX Release 3.0.00.
                 - The capability cwAtmConnCapabilityPxm1eV3R00 
                   is for AXSM-E in MGX Release 3.0.00.
                 - The capability cwAtmConnCapabilityRpmprV3R00
                   is for RPM-PR in MGX Release 3.0.00.
                 - The capability cwAtmConnCapabilityRpmxfV12R02
                   is for RPM-XF in MGX Release 3.0.00.
                 - The capability cwAtmConnCapabilityV5R00
                   is for MPSM155 & VXSM in MGX Release 5.0.00."

        REVISION    "200402070000Z"
        DESCRIPTION
            "Added cwAtmConnCapabilityV5R00 for MPSM155 & VXSM cards"

        REVISION    "200203260000Z"
        DESCRIPTION
            "Initial version of this MIB module."
        ::= { ciscoAgentCapability 380 }

cwAtmConnCapabilityAxsmV2R0160 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 2.1.60."
    STATUS               current
    DESCRIPTION          "Agent capabilities for ATM Switch
                         Service Module(AXSM)."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
    INCLUDES { ciscoWanAtmConnChan2MIBGroup,
               ciscoWanAtmConnStateGroup }

    VARIATION   cwAtmChanCnfgEntry
    CREATION-REQUIRES {
            cwaChanServiceCategory,
            cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, 
            cwaChanRemoteVci, 
            cwaChanRemoteNSAPAddr
    }
    DESCRIPTION
        "Refer description of cwaChanRowStatus."

    VARIATION   cwaChanControllerId
    DESCRIPTION 
        "The value specified in write operation is
	 ignored. The read operation returns the controller
	 id configured in the shelf."

    VARIATION   cwaChanPCR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanMCR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanSCR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanRemotePCR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanRemoteMCR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanRemoteSCR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanAbrICR
    SYNTAX      Unsigned32 (7..5651320)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanCDVT
    SYNTAX      Unsigned32(0..5360000)
    DESCRIPTION
	"Write supported with restricted range."

    VARIATION   cwaChanPercentUtil
    DESCRIPTION 
        "The value specified in write operation is
	 ignored. The read operation returns the default value."
	
    VARIATION   cwaChanRemotePercentUtil
    DESCRIPTION 
        "The value specified in write operation is
	 ignored. The read operation returns the default value."
	
    VARIATION   cwaChanRowStatus
    SYNTAX      INTEGER {
			active(1),
			notInService(2),
			createAndGo(4),
			destroy(6)
		}
    DESCRIPTION "Does not support createAndWait(5)."

    VARIATION   cwaChanIntAbrVSVD
    DESCRIPTION 
        "The value specified in write operation is ignored.
	 The read operation returns the default value."

    VARIATION   cwaChanExtAbrVSVD
    DESCRIPTION 
        "The value specified in write operation is ignored.
	 The read operation returns the default value."
	
    VARIATION   cwaChanAisIWCapability
    DESCRIPTION 
        "The value specified in write operation is ignored.
	 The read operation returns the default value."
	
    VARIATION   cwaChanCLR
    DESCRIPTION 
        "The value specified in write operation is ignored.
	 The read operation returns the default value."

    VARIATION   cwaChanRemoteCLR
    DESCRIPTION 
        "The value specified in write operation is ignored.
	 The read operation returns the default value."

    VARIATION  cwaChanTestType
    SYNTAX     INTEGER { noLpbk(1), nonDestructive(3) }
    DESCRIPTION 
        "Does not support the value destructive(2)."

    VARIATION  cwaChanTestIterations
    SYNTAX     Unsigned32 (1..1)
    DESCRIPTION "Only supported value is 1."
    ::= { ciscoWanAtmConnCapability 1 }

cwAtmConnCapabilityAxsmeV2R0160 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 2.1.60"
    STATUS               current
    DESCRIPTION          "Agent capabilities for Enhanced AXSM(AXSM-E)."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
        INCLUDES { ciscoWanAtmConnChan2MIBGroup,
                   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer description of cwaChanRowStatus."
          
        VARIATION   cwaChanControllerId
        DESCRIPTION 
            "The value specified in write operation is
             ignored. The read operation returns the controller
             id configured in the shelf."

        VARIATION   cwaChanPCR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanMCR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanSCR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemoteMCR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanAbrICR
        SYNTAX      Unsigned32 (7..1412830)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32(0..5360000)
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanPercentUtil
        DESCRIPTION 
            "The value specified in write operation is
             ignored. The read operation returns the default value."
        
        VARIATION   cwaChanRemotePercentUtil
        DESCRIPTION 
            "The value specified in write operation is
             ignored. The read operation returns the default value."
        
        VARIATION   cwaChanRowStatus
        SYNTAX      INTEGER {
                        active(1),
                        notInService(2),
                        createAndGo(4),
                        destroy(6)
                    }
        DESCRIPTION "Does not support createAndWait(5)."

        VARIATION   cwaChanAbrVSVDEnable   
        ACCESS      not-implemented      
        DESCRIPTION "Not supported."

        VARIATION   cwaChanAbrERS
        DESCRIPTION 
            "The value specified in write operation is
             ignored. The read operation returns the default value."
        
        VARIATION   cwaChanAisIWCapability
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."
        
        VARIATION   cwaChanCLR
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."

        VARIATION   cwaChanRemoteCLR
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."

        VARIATION  cwaChanTestType
        SYNTAX     INTEGER { noLpbk(1), nonDestructive(3) }
        DESCRIPTION "Does not support the value destructive(2)."

        VARIATION  cwaChanTestIterations
        SYNTAX     Unsigned32 (1..1)
        DESCRIPTION "Only supported value is 1."

    ::= { ciscoWanAtmConnCapability 2 }

cwAtmConnCapabilityRpmprV2R0160 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 2.1.60"
    STATUS               current
    DESCRIPTION          "Agent capabilities for RPM-PR module."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB

        INCLUDES { ciscoWanAtmConnChan2MIBGroup,
                   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer description of cwaChanRowStatus."

        VARIATION   cwaChanVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "For VCCs, only value zero is supported."
	
        VARIATION   cwaChanVci
        SYNTAX      Unsigned32(1..3808)
        DESCRIPTION "For VCCs only."
	
        VARIATION   cwaChanServiceCategory
        SYNTAX      INTEGER { vbr3nRT(7),ubr1(8),abr(10) }
        DESCRIPTION 
            "Does not support  cbr1(1), vbr1RT(2), vbr2RT(3),
             vbr3RT(4), vbr1nRT(5), vbr2nRT(6), ubr2(9),
             cbr2(11), cbr3(12)."

        VARIATION   cwaChanIdentifier
        SYNTAX      Unsigned32(17..4095)
        DESCRIPTION "For VCCs supported range is 17-3824. 
	             For VPCs supported range is 3841-4095." 
	
        VARIATION   cwaChanStatsEnable
        DESCRIPTION "Read returns value false(2).
                     Write operation is ignored."

        VARIATION   cwaChanLocalVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "For VCCs the VPI value must be zero."

        VARIATION   cwaChanLocalVci
        SYNTAX      Unsigned32(1..3808)
        DESCRIPTION "This is the valid range for VCCs."

        VARIATION   cwaChanRemoteVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "For VCCs the VPI value must be zero."

        VARIATION   cwaChanRemoteVci
        SYNTAX      Unsigned32(1..3808)
        DESCRIPTION "This is the valid range for VCCs."

        VARIATION   cwaChanCCEnable
        ACCESS      read-only
        DESCRIPTION "Read returns value false(2).
                     Write operation is not supported."

        VARIATION   cwaChanFrameDiscard
        DESCRIPTION "Read returns value false(2).
                     Write operation is ignored."

        VARIATION   cwaChanPCR
        SYNTAX      Unsigned32(7..353208)
        DESCRIPTION "Only limited range is supported."

        VARIATION   cwaChanMCR
        SYNTAX      Unsigned32(7..353208)
        DESCRIPTION "Only limited range is supported."

        VARIATION   cwaChanSCR
        SYNTAX      Unsigned32(7..353208)
        DESCRIPTION "Only limited range is supported."

        VARIATION   cwaChanCDV
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanCTD
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanMBS
        SYNTAX      Unsigned32(1..65535)
        DESCRIPTION "Only limited range is supported."
	
        VARIATION   cwaChanCDVT
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."
	
        VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32(7..353208)
        DESCRIPTION "Only limited range is supported."

        VARIATION   cwaChanRemoteMCR
        SYNTAX      Unsigned32(7..353208)
        DESCRIPTION "Only limited range is supported."

        VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32(7..353208)
        DESCRIPTION "Only limited range is supported."

        VARIATION   cwaChanRemoteCDV
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."
	
        VARIATION   cwaChanRemoteCTD
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrICR
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrADTF
        ACCESS      read-only
        DEFVAL      { 50 }
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrRIF
        ACCESS      read-only
        DEFVAL      { oneOver16 }
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrNRM
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrTRM
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrCDF
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrFRTT
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrTBE
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanAbrERS
        DESCRIPTION "Write operation is ignored."

        VARIATION   cwaChanAbrVSVDEnable
        DESCRIPTION "Write operation is ignored."

        VARIATION   cwaChanIntAbrVSVD
        DESCRIPTION "Write operation is ignored."

        VARIATION   cwaChanExtAbrVSVD
        DESCRIPTION "Write operation is ignored."

        VARIATION   cwaChanAisIWCapability
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanCLR
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanRemoteCLR
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanEgressXmtState
        DESCRIPTION "Always returns value zero."

        VARIATION   cwaChanEgressRcvState
        DESCRIPTION "Always returns value zero."

        VARIATION   cwaChanIngressXmtState
        DESCRIPTION "Always returns value zero."

        VARIATION   cwaChanIngressRcvState
        DESCRIPTION "Always returns value zero."

    ::= { ciscoWanAtmConnCapability 3 }

cwAtmConnCapabilityBpxsesV3R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "BPX SES Release 3.0.00"
    STATUS               current
    DESCRIPTION          "Agent capabilities for BPX SES."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
        INCLUDES { ciscoWanAtmConnChan3MIBGroup,
		   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, 
            cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, 
            cwaChanRemoteVci, 
            cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer description of cwaChanRowStatus."

        VARIATION   cwaChanMaxCost
        SYNTAX      Unsigned32(0..134217727)
        DESCRIPTION "Supported with Restricted range."

        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32(0..5000000)
        DESCRIPTION "Supported with Restricted range."

        VARIATION   cwaChanCCEnable
        ACCESS      read-only
        DESCRIPTION "Write Operation not Supported."

        VARIATION   cwaChanPCR
        SYNTAX      Unsigned32 (6..4294967295)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanMCR
        SYNTAX      Unsigned32 (6..4294967295)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanSCR
        SYNTAX      Unsigned32 (6..4294967295)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32 (6..4294967295)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanRemoteMCR
        SYNTAX      Unsigned32 (6..4294967295)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32 (6..4294967295)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanMBS
        DEFVAL      { 1024 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanRemoteMBS
        DEFVAL      { 1024 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanAbrICR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION "Write supported with restricted range."

        VARIATION   cwaChanAbrADTF
        DEFVAL      { 50 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrRDF
        DEFVAL      { oneOver4096 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrRIF
        DEFVAL      { oneOver512 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrNRM
        DEFVAL      { nrm32 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrTRM
        DEFVAL      { trm100 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrCDF
        DEFVAL      { cdfOneOver2 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrFRTT
        DEFVAL      { 0 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrTBE
        DEFVAL      { 1048320 }
        DESCRIPTION ""

        VARIATION   cwaChanIntAbrVSVD
        ACCESS      read-only
        DESCRIPTION "Write operation not supported."

        VARIATION   cwaChanExtAbrVSVD
        ACCESS	    read-only
        DESCRIPTION "Write operation not supported."
	
        VARIATION   cwaChanOamSegEpEnable
        DEFVAL      { oamSegEp }
        DESCRIPTION ""

        VARIATION   cwaChanEgressXmtState
        DESCRIPTION "Set to value 0 always."
        
        VARIATION   cwaChanEgressRcvState
        DESCRIPTION "Set to value 0 always."

        VARIATION   cwaChanIngressXmtState
        DESCRIPTION "Set to value 0 always."

        VARIATION   cwaChanIngressRcvState
        DESCRIPTION "Set to value 0 always."

    ::= { ciscoWanAtmConnCapability 4 }

cwAtmConnCapabilityAxsmV3R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 3.0.00."
    STATUS               current
    DESCRIPTION          "Agent capabilities for AXSM module."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
	INCLUDES { ciscoWanAtmConnChan3MIBGroup,
		   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, 
            cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, 
            cwaChanRemoteVci, 
            cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer description of cwaChanRowStatus."

        VARIATION   cwaChanServiceCategory
        DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION cwaChanVpcFlag
        DEFVAL   { false }
        DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION   cwaChanControllerId
        SYNTAX      Unsigned32(1..20)
        DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION   cwaChanFrameDiscard
        DESCRIPTION
            "Can not configure when cwaChanVpcFlag = 'true'"

        VARIATION   cwaChanPCR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanMCR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanSCR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemoteMCR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32 (7..5651320)
        DEFVAL      { 50 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanMBS
        DEFVAL      { 1024 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanRemoteMBS
        DEFVAL      { 1024 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32(0..5000000)
        DEFVAL      { 250000 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanAbrICR
        SYNTAX      Unsigned32 (7..5651320)
        ACCESS      read-only
        DEFVAL      { 50 }
        DESCRIPTION
            "Write supported with restricted range."

        VARIATION   cwaChanAbrADTF
        ACCESS      read-only
        DEFVAL      { 50 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrRDF
        ACCESS      read-only
        DEFVAL      { oneOver4096 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrRIF
        ACCESS      read-only
        DEFVAL      { oneOver512 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrNRM
        ACCESS      read-only
        DEFVAL      { nrm32 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrTRM
        ACCESS      read-only
        DEFVAL      { trm100 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrCDF
        ACCESS      read-only
        DEFVAL      { cdfOneOver2 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrFRTT
        ACCESS      read-only
        DEFVAL      { 0 }
        DESCRIPTION ""

        VARIATION   cwaChanAbrTBE
        ACCESS      read-only
        DEFVAL      { 1048320 }
        DESCRIPTION ""

        VARIATION   cwaChanRowStatus
        SYNTAX      INTEGER {
                        active(1),
                        notInService(2),
                        createAndGo(4),
                        destroy(6)
            }
        DESCRIPTION "Does not support createAndWait(5)."

        VARIATION   cwaChanIntAbrVSVD
        DEFVAL      { vsvdOff }
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."

        VARIATION   cwaChanExtAbrVSVD
        DEFVAL      { vsvdOff }
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."
	
        VARIATION   cwaChanCLR
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."

        VARIATION   cwaChanRemoteCLR
        DESCRIPTION 
            "The value specified in write operation is ignored.
             The read operation returns the default value."
       
        VARIATION cwaChanOamSegEpEnable
        DEFVAL    { oamSegEp }
        DESCRIPTION
            "Default value depends upon the switch configuration "

        VARIATION  cwaChanTestIterations
        SYNTAX     Unsigned32 (1..100)
        DESCRIPTION 
            "Restricted range is supported."

    ::= { ciscoWanAtmConnCapability 5 }

cwAtmConnCapabilityAxsmeV3R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 3.0.00."
    STATUS               current
    DESCRIPTION          "Agent capabilities for AXSM-E module."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
	INCLUDES { ciscoWanAtmConnChan3MIBGroup,
		   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer Description of cwaChanRowStatus."

	VARIATION   cwaChanServiceCategory
	DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION cwaChanVpcFlag
        DEFVAL   { false }
	DESCRIPTION 
            "Write Operation is ignored on an existing connection."

	VARIATION   cwaChanControllerId
        SYNTAX      Unsigned32(1..20)
	DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION   cwaChanFrameDiscard
        DESCRIPTION
            "Can not configure when cwaChanVpcFlag = 'true'"

	VARIATION   cwaChanPCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanMCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanSCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemotePCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemoteMCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemoteSCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanMBS
        DEFVAL      { 1024 }
        DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemoteMBS
        DEFVAL      { 1024 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32(0..5000000)
        DEFVAL      { 250000 }
        DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanAbrICR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanAbrADTF
        DEFVAL      { 50 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrRDF
        DEFVAL      { oneOver4096 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrRIF
        DEFVAL      { oneOver512 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrNRM
        DEFVAL      { nrm32 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrTRM
        DEFVAL      { trm100 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrCDF
        DEFVAL      { cdfOneOver2 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrFRTT
        DEFVAL      { 0 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrTBE
        DEFVAL      { 1048320 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrVSVDEnable
        DESCRIPTION 
            "The value specified in write operation is
             ignored. The read operation returns the default value."

	VARIATION   cwaChanRowStatus
        SYNTAX      INTEGER {
			active(1),
			notInService(2),
			createAndGo(4),
			destroy(6)
		    }
	DESCRIPTION "Does not support createAndWait(5)."

	VARIATION   cwaChanIntAbrVSVD
        DEFVAL      { vsvdOff }
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."

	VARIATION   cwaChanExtAbrVSVD
        DEFVAL      { vsvdOff }
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."
	
	VARIATION   cwaChanCLR
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."

	VARIATION   cwaChanRemoteCLR
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."
       
        VARIATION cwaChanOamSegEpEnable
        DEFVAL    { oamSegEp }
        DESCRIPTION
            "Default value depends upon the switch configuration "

	VARIATION  cwaChanTestIterations
	SYNTAX     Unsigned32 (1..100)
	DESCRIPTION 
            "Restricted range is supported."

    ::= { ciscoWanAtmConnCapability 6 }

cwAtmConnCapabilityPxm1eV3R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 3.0.00."
    STATUS               current
    DESCRIPTION          "Agent capabilities for PXM1-E module."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
	INCLUDES { ciscoWanAtmConnChan3MIBGroup,
		   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer Description of cwaChanRowStatus."

	VARIATION   cwaChanServiceCategory
	DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION cwaChanVpcFlag
        DEFVAL   { false }
	DESCRIPTION 
            "Write Operation is ignored on an existing connection."

	VARIATION   cwaChanControllerId
        SYNTAX      Unsigned32(1..20)
	DESCRIPTION 
            "Write Operation is ignored on an existing connection."

        VARIATION   cwaChanFrameDiscard
        DESCRIPTION
            "Can not configure when cwaChanVpcFlag = 'true'"

	VARIATION   cwaChanPCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanMCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanSCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemotePCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemoteMCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemoteSCR
	SYNTAX      Unsigned32 (7..1412830)
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanMBS
        DEFVAL      { 1024 }
        DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanRemoteMBS
        DEFVAL      { 1024 }
        DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32(0..5000000)
        DEFVAL      { 250000 }
        DESCRIPTION
	    "Write supported with restricted range."

	VARIATION   cwaChanAbrICR
	SYNTAX      Unsigned32 (7..1412830)
        ACCESS      read-only   
        DEFVAL      { 50 }
	DESCRIPTION
	    "Write supported with restricted range."

        VARIATION   cwaChanAbrADTF
        ACCESS      read-only   
        DEFVAL      { 50 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrRDF
        ACCESS      read-only   
        DEFVAL      { oneOver4096 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrRIF
        ACCESS      read-only   
        DEFVAL      { oneOver512 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrNRM
        ACCESS      read-only   
        DEFVAL      { nrm32 }
        DESCRIPTION 
            ""

        VARIATION   cwaChanAbrTRM
        ACCESS      read-only   
        DEFVAL      { trm100 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrCDF
        ACCESS      read-only   
        DEFVAL      { cdfOneOver2 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrFRTT
        ACCESS      read-only   
        DEFVAL      { 0 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrTBE
        ACCESS      read-only   
        DEFVAL      { 1048320 }
        DESCRIPTION 
             ""

        VARIATION   cwaChanAbrVSVDEnable
        DESCRIPTION 
            "The value specified in write operation is
             ignored. The read operation returns the default value."

	VARIATION   cwaChanRowStatus
        SYNTAX      INTEGER {
			active(1),
			notInService(2),
			createAndGo(4),
			destroy(6)
		    }
	DESCRIPTION "Does not support createAndWait(5)."

	VARIATION   cwaChanIntAbrVSVD
        DEFVAL      { vsvdOff }
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."

	VARIATION   cwaChanExtAbrVSVD
        DEFVAL      { vsvdOff }
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."
	
	VARIATION   cwaChanCLR
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."

	VARIATION   cwaChanRemoteCLR
	DESCRIPTION 
            "The value specified in write operation is ignored.
	     The read operation returns the default value."
       
        VARIATION cwaChanOamSegEpEnable
        DEFVAL    { oamSegEp }
        DESCRIPTION
            "Default value depends upon the switch configuration "

	VARIATION  cwaChanTestIterations
	SYNTAX     Unsigned32 (1..100)
	DESCRIPTION 
            "Restricted range is supported."

    ::= { ciscoWanAtmConnCapability 7 }

cwAtmConnCapabilityRpmprV3R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 3.0.00"
    STATUS               current
    DESCRIPTION          "Agent capabilities for RPM-PR module."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB

        INCLUDES { ciscoWanAtmConnChan3MIBGroup,
                   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanVpcFlag, cwaChanRoutingMastership,
            cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer Description of cwaChanRowStatus."

	VARIATION   cwaChanVpi
	SYNTAX      Unsigned32(0..255)
	DESCRIPTION "For VCCs, only value zero is supported."
	
	VARIATION   cwaChanVci
	SYNTAX      Unsigned32(1..3808)
	DESCRIPTION "For VCCs only."
	
	VARIATION   cwaChanServiceCategory
	SYNTAX      INTEGER { vbr3nRT(7),ubr1(8),abr(10) }
        DEFVAL     { ubr1 }
	DESCRIPTION 
            "Does not support  cbr1(1), vbr1RT(2), vbr2RT(3),
             vbr3RT(4), vbr1nRT(5), vbr2nRT(6), ubr2(9),
             cbr2(11), cbr3(12)."

	
	VARIATION   cwaChanIdentifier
	SYNTAX      Unsigned32(17..4095)
	DESCRIPTION "For VCCs supported range is 17-3824. 
	             For VPCs supported range is 3841-4095." 
	
	VARIATION   cwaChanStatsEnable
	DESCRIPTION "Read returns value false(2).
                    Write operation is ignored."

	VARIATION   cwaChanCCEnable
        ACCESS      read-only
	DESCRIPTION "Read returns value false(2).
                     Write operation is not supported."

        VARIATION   cwaChanLocalVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "For VCCs the VPI Value Must be zero."

        VARIATION   cwaChanLocalVci
        SYNTAX      Unsigned32(1..3808)
        DESCRIPTION "This is the valid range for VCCs."

	VARIATION   cwaChanRemoteVpi
        SYNTAX      Unsigned32(0..255)
	DESCRIPTION "For VCCs the VPI Value Must be zero."

	VARIATION   cwaChanRemoteVci
        SYNTAX      Unsigned32(1..3808)
	DESCRIPTION "This is the valid range for VCCs."

	VARIATION   cwaChanControllerId
        DEFVAL      { 2 }
	DESCRIPTION 
            "Controller Id(PNNI) is selected by default."

	VARIATION   cwaChanFrameDiscard
        ACCESS      read-only
	DESCRIPTION "Read returns value false(2).
                    Write operation is ignored."

	VARIATION   cwaChanPCR
        SYNTAX      Unsigned32(7..353208)
        DEFVAL      { 353208 }
	DESCRIPTION ""

	VARIATION   cwaChanMCR
        SYNTAX      Unsigned32(7..353208)
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanSCR
        SYNTAX      Unsigned32(7..353208)
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32(7..353208)
        DEFVAL      { 353208 }
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanRemoteMCR
        SYNTAX      Unsigned32(7..353208)
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32(7..353208)
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanMBS
        SYNTAX      Unsigned32(1..65535)
        DEFVAL      { 94 }
	DESCRIPTION "Only limited range is supported."
	
	VARIATION   cwaChanRemoteMBS
        SYNTAX      Unsigned32(1..65535)
        DEFVAL      { 94 }
	DESCRIPTION "Only limited range is supported."
	
	VARIATION   cwaChanCDV
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteCDV
        ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."
	
	VARIATION   cwaChanCTD
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteCTD
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanCDVT
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrICR
        SYNTAX      Unsigned32(7..353208)
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrADTF
	ACCESS      read-only
        DEFVAL      { 50 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrRIF
	ACCESS      read-only
        DEFVAL      { oneOver16 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrNRM
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrTRM
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrCDF
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrFRTT
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrTBE
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrVSVDEnable
        ACCESS      read-only
	DESCRIPTION "Write operation is ignored."

	VARIATION   cwaChanIntAbrVSVD
        ACCESS      read-only
	DESCRIPTION "Write operation is ignored."

	VARIATION   cwaChanExtAbrVSVD
        ACCESS      read-only
	DESCRIPTION "Write operation is ignored."

	VARIATION   cwaChanCLR
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteCLR
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

        VARIATION cwaChanOamSegEpEnable
        DEFVAL    { oamSegEp }
        DESCRIPTION
            ""

        VARIATION cwaChanSlaveType
        ACCESS    not-implemented
        DESCRIPTION
            "This object is not supported."

        VARIATION cwaChanRoutingPriority
        ACCESS    not-implemented
        DESCRIPTION
            "This object is not supported."

	VARIATION   cwaChanEgressXmtState
	DESCRIPTION "Always returns value zero."

	VARIATION   cwaChanEgressRcvState
	DESCRIPTION "Always returns value zero."

	VARIATION   cwaChanIngressXmtState
	DESCRIPTION "Always returns value zero."

	VARIATION   cwaChanIngressRcvState
	DESCRIPTION "Always returns value zero."

    ::= { ciscoWanAtmConnCapability 8 }

cwAtmConnCapabilityRpmxfV12R02 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "IOS Release 12.2
                          in MGX8850 Release 3.0.00"
    STATUS               current
    DESCRIPTION          "Agent capabilities for RPM-XF module."

    SUPPORTS CISCO-WAN-ATM-CONN-MIB

        INCLUDES { ciscoWanAtmConnChan3MIBGroup,
                   ciscoWanAtmConnStateGroup }

        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanVpcFlag,cwaChanRoutingMastership,
            cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
        }
        DESCRIPTION
            "Refer Description of cwaChanRowStatus."

	VARIATION   cwaChanVpi
	SYNTAX      Unsigned32(0..240)
	DESCRIPTION "For VPCs value 0 is not supported."
	
	VARIATION   cwaChanVci
	SYNTAX      Unsigned32(32..65535)
	DESCRIPTION "Only limited range is supported.
                    For VPCs, only value 0 is supported."
	
	VARIATION   cwaChanServiceCategory
	SYNTAX      INTEGER { vbr3RT(4),vbr3nRT(7),ubr1(8) }
        DEFVAL      { ubr1 }
	DESCRIPTION 
            "Does not support  cbr1(1), vbr1RT(2), vbr2RT(3),
            vbr1nRT(5), vbr2nRT(6), ubr2(9), abr(10),
            cbr2(11), cbr3(12)."
	
	VARIATION   cwaChanControllerId
        DEFVAL      { 2 }
	DESCRIPTION 
            "Controller Id(PNNI) is selected by default."

	VARIATION   cwaChanStatsEnable
        ACCESS      read-only
	DESCRIPTION 
            "Read returns value false(2).
            Write operation is not supported."

        VARIATION   cwaChanLocalVpi
        SYNTAX      Unsigned32(0..240)
        DESCRIPTION "For VPCs, value 0 is not supported."

	VARIATION   cwaChanLocalVci
        SYNTAX      Unsigned32(32..65535)
	DESCRIPTION "For VCCs only."

	VARIATION   cwaChanRemoteVpi
        SYNTAX      Unsigned32(0..255)
	DESCRIPTION "For VPCs, value 0 is not supported."

	VARIATION   cwaChanRemoteVci
        SYNTAX      Unsigned32(32..65535)
	DESCRIPTION "For VCCs, range is 32..65535.
                     For VPCs, only value 0 is supported."

	VARIATION   cwaChanCCEnable
        ACCESS      read-only
	DESCRIPTION "Read returns value false(2).
                     Write operation is not supported."

	VARIATION   cwaChanFrameDiscard
	DESCRIPTION "Read returns value false(2).
                    Write operation is ignored."

	VARIATION   cwaChanPCR
        SYNTAX      Unsigned32(3..2824661)
        DEFVAL      { 2824661 }
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanMCR
        ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanSCR
        SYNTAX      Unsigned32(3..2824661)
	DESCRIPTION "Only limited range is supported."

	VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32(3..2824661)
	DESCRIPTION "Only limited range is supported.
                    Default value is same as cwaChanPCR."

	VARIATION   cwaChanRemoteMCR
        ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32(3..2824661)
	DESCRIPTION "Only limited range is supported.
                    Default value is same as cwaChanSCR."

	VARIATION   cwaChanCDV
	ACCESS      read-only
        DEFVAL      { 16777215 } -- 0xFFFFFF
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteCDV
        ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanCTD
	ACCESS      read-only
        DEFVAL      { 65535 } -- 0xFFFF
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteCTD
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanMBS
        SYNTAX      Unsigned32(1..65535)
        DEFVAL      { 94 }
	DESCRIPTION "Only limited range is supported."
	
	VARIATION   cwaChanRemoteMBS
        SYNTAX      Unsigned32(1..65535)
        DEFVAL      { 94 }
	DESCRIPTION "Only limited range is supported.
                    Default value is same as cwaChanMBS."
	
        VARIATION   cwaChanCDVT
        ACCESS      read-only
        DESCRIPTION "Object cannot be created or modified."
	
	VARIATION   cwaChanAbrICR
	ACCESS      read-only
        DEFVAL      { 7 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrADTF
	ACCESS      read-only
        DEFVAL      { 50 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrRDF
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrRIF
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrNRM
	ACCESS      read-only
        DEFVAL      { nrm32 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrTRM
	ACCESS      read-only
        DEFVAL      { trm100 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrCDF
	ACCESS      read-only
        DEFVAL      { cdfOneOver16 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrFRTT
	ACCESS      read-only
        DEFVAL      { 16700000 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrTBE
	ACCESS      read-only
        DEFVAL      { 16777215 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanAbrVSVDEnable
        ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

        VARIATION   cwaChanRowStatus
        SYNTAX      INTEGER {
                        active(1),
                        notInService(2),
                        createAndGo(4),
                        destroy(6)
                    }
        DESCRIPTION
            "Does not support notReady(3) and createAndWait(5)."

	VARIATION   cwaChanIntAbrVSVD
        ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanExtAbrVSVD
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanCLR
	ACCESS      read-only
        DEFVAL      { 6 }
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanRemoteCLR
	ACCESS      read-only
	DESCRIPTION "Object cannot be created or modified."

	VARIATION   cwaChanEgressXmtState
	DESCRIPTION "Always returns value zero."

	VARIATION   cwaChanEgressRcvState
	DESCRIPTION "Always returns value zero."

	VARIATION   cwaChanIngressXmtState
	DESCRIPTION "Always returns value zero."

	VARIATION   cwaChanIngressRcvState
	DESCRIPTION "Always returns value zero."

    ::= { ciscoWanAtmConnCapability 9 }

cwAtmConnCapabilityV5R00 AGENT-CAPABILITIES
    PRODUCT-RELEASE      "MGX8850 Release 5.0.00."
    STATUS               current
    DESCRIPTION          "Agent capabilities for MPSM155 and
                          Voice Switch Service Module - VXSM"

    SUPPORTS CISCO-WAN-ATM-CONN-MIB
    INCLUDES { 
                 ciscoWanAtmConnChan4MIBGroup,
		 ciscoWanAtmConnStateGroup 
             }

--
-- Variations applicable for MPSM155
--
        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
            cwaChanServiceCategory, 
            cwaChanVpcFlag,
            cwaChanRoutingMastership,
            cwaChanRemoteVpi, 
            cwaChanRemoteVci, 
            cwaChanRemoteNSAPAddr }
        DESCRIPTION
            "Refer to description of cwaChanRowStatus."

--
-- Variations applicable for VXSM
--
        VARIATION   cwAtmChanCnfgEntry
        CREATION-REQUIRES {
                         cwaChanServiceCategory,
                         cwaChanRoutingMastership,
                         cwaChanRemoteVpi,
                         cwaChanRemoteVci,
                         cwaChanRemoteNSAPAddr
                          }
        DESCRIPTION "Refer description of cwaChanRowStatus.
                 The following objects are allowed to be
                 modified at master end point:
                 cwaChanMBS
                 cwaChanRemoteMBS
                 cwaChanCDV
                 cwaChanRemoteCDV
                "
--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanServiceCategory
        SYNTAX      INTEGER {
                           cbr1   (1),
                           vbr1RT (2),
                           vbr1nRT(5),
                           vbr3nRT(7),
                           ubr1   (8)
                        }
        DESCRIPTION "Limited data values are supported"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "Valid range is 0 to 255."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanLocalVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "Valid range is 0 to 255."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanRemoteVpi
        SYNTAX      Unsigned32(0..255)
        DESCRIPTION "Valid range is 0 to 255."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanControllerId
        SYNTAX      Unsigned32 (1..20)
        DESCRIPTION "This object cannot be modified 
                     after the row is created."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanControllerId
        SYNTAX      Unsigned32 (2..2)
        DEFVAL      { 2 }
        DESCRIPTION "Only support PNNI."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanVpcFlag
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanPCR
        SYNTAX      Unsigned32 (10..104268)
        DEFVAL      { 50 }
        DESCRIPTION "Rate limited to T3 due to hardware
                     limitation"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanPCR
        SYNTAX      Unsigned32 (7..2600000)
        DEFVAL      { 50 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 50."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanMCR 
        SYNTAX      Unsigned32 (10..104268)
        DESCRIPTION "Default set to cwaChanPCR"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanMCR
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanSCR
        SYNTAX      Unsigned32 (10..104268)
        DESCRIPTION "Default set to cwaChanPCR"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanSCR
        SYNTAX      Unsigned32 (7..2600000)
        DEFVAL      { 50 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 50."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32 (10..104268)
        DEFVAL      { 50 }
        DESCRIPTION "Rate limited to T3 due to hardware
                     limitation"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanRemotePCR
        SYNTAX      Unsigned32 (7..2600000)
        DEFVAL      { 50 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 50."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanRemoteMCR
        SYNTAX      Unsigned32 (10..104268)
        DESCRIPTION "Default set to cwaChanRemotePCR"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanRemoteMCR
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32 (10..104268)
        DESCRIPTION "Default set to cwaChanRemotePCR"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanRemoteSCR
        SYNTAX      Unsigned32 (7..2600000)
        DEFVAL      { 50 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 50."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32 (1..5000000)
        DEFVAL      { 250000 }
        DESCRIPTION "Write supported with restricted range."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanCDVT
        SYNTAX      Unsigned32(0..5000000)
        DEFVAL      { 250000 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 250000."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrICR
        SYNTAX      Unsigned32 (10..104268)
        DESCRIPTION "Default set to cwaChanPCR"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrICR
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrADTF
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrADTF
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrRDF
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrRDF
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrRIF
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrRIF
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrNRM
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrNRM
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrTRM
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrTRM
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrCDF
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrCDF
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrFRTT
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrFRTT
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrTBE
        DESCRIPTION "Default taken from PNNI controller"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrTBE
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanAbrVSVDEnable
        ACCESS      not-implemented 
        DESCRIPTION "This object is not supported"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanAbrVSVDEnable
        ACCESS      read-only
        DESCRIPTION "Can only be FALSE."

        VARIATION   cwaChanRowStatus
        SYNTAX      INTEGER { active(1),
                              notInService(2),
                              createAndGo(4),
                              destroy(6)
                            }
        DESCRIPTION "Does not support createAndWait(5)."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanTestIterations
        ACCESS      not-implemented 
        DESCRIPTION "Test operation will be executed only once"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanTestIterations
        SYNTAX      Unsigned32 (1..100)
        DEFVAL      { 1 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 1."

--
-- Variations applicable for MPSM155
--
        VARIATION   cwaChanStatsEnable
        DEFVAL      { true }
        DESCRIPTION "Stats is enabled by default on MPSM155"

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanOamSegEpEnable
        DEFVAL      { nonOamSegEp }
        DESCRIPTION "default is nonOamSegEp."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanReroute
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanIntAbrVSVD
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanExtAbrVSVD
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanP2MP
        ACCESS      not-implemented
        DESCRIPTION "Object not supported."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanMBS
        SYNTAX      Unsigned32 (1..5000000)
        DEFVAL      { 1024 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 1024."

--
-- Variations applicable for VXSM
--
        VARIATION   cwaChanRemoteMBS
        SYNTAX      Unsigned32 (1..5000000)
        DEFVAL      { 1024 }
        DESCRIPTION "Write supported with restricted range.
                     Default value is 1024."

    ::= { ciscoWanAtmConnCapability 10 }

END