CTRON-SSR-HARDWARE-MIB.mib object view, vendor Enterasys-Networks-Inc
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file CTRON-SSR-HARDWARE-MIB and use it to monitor vendor specific OID's.
CTRON-SSR-HARDWARE-MIB file content
Object view of CTRON-SSR-HARDWARE-MIB:
| Scalar Object |
| sysHwNumSlots |
.1.3.6.1.4.1.52.2501.1.1.1 |
|
The number of slots present in the Shelf/Chassis.
|
| sysHwModuleEntry |
.1.3.6.1.4.1.52.2501.1.1.2.1 |
|
An entry containing management information applicable
to a particular module.
|
| sysHwPortEntry |
.1.3.6.1.4.1.52.2501.1.1.3.1 |
|
An entry containing management information applicable
to a particular module.
|
| sysHwPowerSupply |
.1.3.6.1.4.1.52.2501.1.1.4 |
|
The number and status of power supplies powering the Shelf/Chassis.
|
| sysHwFan |
.1.3.6.1.4.1.52.2501.1.1.5 |
|
The current state of the fans located inside the Shelf/Chassis.
|
| sysHwTemperature |
.1.3.6.1.4.1.52.2501.1.1.6 |
|
The current temperature status of the Shelf/Chassis.
|
| sysHwChassisId |
.1.3.6.1.4.1.52.2501.1.1.7 |
|
Operator defined serial number for this particular chassis/shelf.
|
| sysHwSwitchingFabric |
.1.3.6.1.4.1.52.2501.1.1.19 |
|
Status of Switching Fabric in shelf/chassis.
|
| sysHwControlModuleLED |
.1.3.6.1.4.1.52.2501.1.1.20 |
|
Status of the shelf/chassis Active Control Module's four LED displays.
|
| sysHwControlModuleBackupState |
.1.3.6.1.4.1.52.2501.1.1.21 |
|
Status of the the backup Control Module as interpreted from the
active control module. CLI: system show hardware will present
the following data: Redundant CPU slot : Not present
|
| sysHwLastHotSwapEvent |
.1.3.6.1.4.1.52.2501.1.1.22 |
|
The value of sysUpTime when the last hotswap of a physical module event occured.
|
| sysHwTotalInOctets |
.1.3.6.1.4.1.52.2501.1.1.10 |
|
The total number of octets into the switch.
|
| sysHwTotalOutOctets |
.1.3.6.1.4.1.52.2501.1.1.11 |
|
The total number of octets out of the switch.
|
| sysHwTotalInFrames |
.1.3.6.1.4.1.52.2501.1.1.12 |
|
The total number of frames into the switch.
|
| sysHwTotalOutFrames |
.1.3.6.1.4.1.52.2501.1.1.13 |
|
The total number of frames out of the switch.
|
| sysHwTotalL2SwitchedFrames |
.1.3.6.1.4.1.52.2501.1.1.14 |
|
The current number of frames switched at Layer 2 (transport).
|
| sysHwTotalL3SwitchedFrames |
.1.3.6.1.4.1.52.2501.1.1.15 |
|
The current number of frames switched at IETF Layers 3 (transport) and
4 (application).
|
| Tabular Object |
| sysHwModuleSlotNumber |
.1.3.6.1.4.1.52.2501.1.1.2.1.1 |
|
The physical slot number of the module in the Shelf/Chassis.
|
| sysHwModuleType |
.1.3.6.1.4.1.52.2501.1.1.2.1.2 |
|
The physical module type.
|
| sysHwModuleDesc |
.1.3.6.1.4.1.52.2501.1.1.2.1.3 |
|
The description of the module with it's version number etc.
For the Control Module it should have the software version, the
amount of dynamic RAM, flash RAM.
|
| sysHwModuleNumPorts |
.1.3.6.1.4.1.52.2501.1.1.2.1.4 |
|
The number of physical ports on this Card/Module.
|
| sysHwModuleVersion |
.1.3.6.1.4.1.52.2501.1.1.2.1.5 |
|
The alpha-numeric version string for this Card/Module.
|
| sysHwModuleMemory |
.1.3.6.1.4.1.52.2501.1.1.2.1.6 |
|
System Memory size available on the Module. Reports
-1 if no memory exists on this module, such as power supplies.
|
| sysHwModuleService |
.1.3.6.1.4.1.52.2501.1.1.2.1.8 |
|
The Cabletron service identifier string for this Card/Module.The board serial
number is appended to the string too.
|
| sysHwModuleStatus |
.1.3.6.1.4.1.52.2501.1.1.2.1.9 |
|
The current status of this module, online or offline.
|
| sysHwPortSlotNumber |
.1.3.6.1.4.1.52.2501.1.1.3.1.1 |
|
The physical slot number of the module in the Chassis.
|
| sysHwPortNumber |
.1.3.6.1.4.1.52.2501.1.1.3.1.2 |
|
The port number of the physical port in the Card/Module.
|
| sysHwPortType |
.1.3.6.1.4.1.52.2501.1.1.3.1.3 |
|
The physical port type.
|
| sysHwPortConnectorType |
.1.3.6.1.4.1.52.2501.1.1.3.1.4 |
|
The physical port connector type.
|
| sysHwPortIfIndex |
.1.3.6.1.4.1.52.2501.1.1.3.1.5 |
|
The value of ifIndex used to access this port in the Interface MIB.
|
| Table |
| sysHwModuleTable |
.1.3.6.1.4.1.52.2501.1.1.2 |
|
A list of module entries.
|
| sysHwPortTable |
.1.3.6.1.4.1.52.2501.1.1.3 |
|
A list of module entries.
|
| Object Identifier |
| hardwareMIB |
.1.3.6.1.4.1.52.2501.1.200 |
|
This module defines a schema to access SSR hardware configuration.
|
| sysHwGroup |
.1.3.6.1.4.1.52.2501.1.1 |
| hwConformance |
.1.3.6.1.4.1.52.2501.1.200.2 |
| hwCompliances |
.1.3.6.1.4.1.52.2501.1.200.2.1 |
| hwGroups |
.1.3.6.1.4.1.52.2501.1.200.2.2 |
| Group |
| hwConfGroupV10 |
.1.3.6.1.4.1.52.2501.1.200.2.2.1 |
|
A set of managed objects that make up version 1.0 of the SSR Hardware mib.
|
| hwConfGroupV11 |
.1.3.6.1.4.1.52.2501.1.200.2.2.2 |
|
A set of managed objects that make up version 1.1 of the SSR Hardware mib.
|
| hwConfGroupV30 |
.1.3.6.1.4.1.52.2501.1.200.2.2.4 |
|
A set of managed objects that make up version 3.0 of the SSR Hardware mib.
|
| hwConfGroupV12 |
.1.3.6.1.4.1.52.2501.1.200.2.2.3 |
|
A set of managed objects that make up version 1.2 of the SSR Hardware mib.
|
