Wellfleet-TELNET-MIB.mib object view, vendor Wellfleet
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-TELNET-MIB and use it to monitor vendor specific OID's.
Wellfleet-TELNET-MIB file content
Object view of Wellfleet-TELNET-MIB:
| Scalar Object |
| wfTelnetDelete |
.1.3.6.1.4.1.18.3.5.3.7.1.1 |
|
Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete TELNET.
|
| wfTelnetDisable |
.1.3.6.1.4.1.18.3.5.3.7.1.2 |
|
Enables or Disables TELNET Subsystem
|
| wfTelnetLinesPerScreen |
.1.3.6.1.4.1.18.3.5.3.7.1.3 |
|
Number of lines which can be displayed in one screen on the Telnet
Technician Interface console.
(Default value if NAWS option not negotiated)
|
| wfTelnetMoreDisable |
.1.3.6.1.4.1.18.3.5.3.7.1.4 |
|
Enable the 'more' feature on the Telnet Technician Interface console
|
| wfTelnetPrompt |
.1.3.6.1.4.1.18.3.5.3.7.1.5 |
|
Character string which will be used as the system prompt on
the Telnet Technician Interface console
|
| wfTelnetLoginTimeOut |
.1.3.6.1.4.1.18.3.5.3.7.1.6 |
|
Time out in minutes to Disconnect when at the login prompt
|
| wfTelnetPasswordTimeOut |
.1.3.6.1.4.1.18.3.5.3.7.1.7 |
|
Timout in minutes on Password entry
|
| wfTelnetCommandTimeOut |
.1.3.6.1.4.1.18.3.5.3.7.1.8 |
|
Time out in minutes to Disconnect when at the command prompt
|
| wfTelnetLoginRetries |
.1.3.6.1.4.1.18.3.5.3.7.1.9 |
|
Limit # of login attempts then Disconnect
|
| wfTelnetTotalLogins |
.1.3.6.1.4.1.18.3.5.3.7.1.10 |
|
Total number of Telnet TI login attempts
|
| wfTelnetUserLoginErrors |
.1.3.6.1.4.1.18.3.5.3.7.1.11 |
|
Total number of FAILED User login attempts
|
| wfTelnetManagerLoginErrors |
.1.3.6.1.4.1.18.3.5.3.7.1.12 |
|
Total number of FAILED Manager login attempts
|
| wfTelnetOtherLoginErrors |
.1.3.6.1.4.1.18.3.5.3.7.1.13 |
|
Total number of FAILED Other login attempts
|
| wfTelnetActiveSessions |
.1.3.6.1.4.1.18.3.5.3.7.1.14 |
|
Total number of Telnet TI Sessions
|
| wfTelnetDiagnosticReport |
.1.3.6.1.4.1.18.3.5.3.7.1.15 |
|
Diagnostic Flag: report prints the options
information, plus some additional information about
what processing is going on
|
| wfTelnetDiagnosticExercise |
.1.3.6.1.4.1.18.3.5.3.7.1.16 |
|
Diagnostic Flag: Not implemented yet.
|
| wfTelnetDiagnosticNetworkData |
.1.3.6.1.4.1.18.3.5.3.7.1.17 |
|
Diagnostic Flag: NETDATA displays the data
stream received by telnetd
|
| wfTelnetDiagnosticPtyData |
.1.3.6.1.4.1.18.3.5.3.7.1.18 |
|
Diagnostic Flag: PTYDATA displays data written to the pty
|
| wfTelnetDiagnosticOptions |
.1.3.6.1.4.1.18.3.5.3.7.1.19 |
|
Diagnostic Flag: OPTIONS prints information about
the negotiation of TELNET options
|
| wfTelnetInitialSearchPath |
.1.3.6.1.4.1.18.3.5.3.7.1.20 |
|
Example: 'A:;1:;2:' or '2:;4:6:;9:
|
| wfTelnetManagerAutoScript |
.1.3.6.1.4.1.18.3.5.3.7.1.21 |
|
for each login.
|
| wfTelnetUserAutoScript |
.1.3.6.1.4.1.18.3.5.3.7.1.22 |
|
for each login.
|
| wfTelnetUserAbortLogoutDisable |
.1.3.6.1.4.1.18.3.5.3.7.1.23 |
|
a USER from escaping out of the User Autoscript
|
| wfTelnetHistoryDepth |
.1.3.6.1.4.1.18.3.5.3.7.1.24 |
|
TI command history table size
|
| wfTelnetReverseEnable |
.1.3.6.1.4.1.18.3.5.3.7.1.25 |
|
Reverse Telnet enabled
|
| wfTelnetReversePort |
.1.3.6.1.4.1.18.3.5.3.7.1.26 |
|
Console port to use for reverse telnet
|
| Object Identifier |
| wfTelnet |
.1.3.6.1.4.1.18.3.5.3.7.1 |
