AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | Infra | IoT | IT Service | Linux | Network/System | Performance | Protocol | SaaS | Security | Service Level | SNMP | Storage | VMware | VoIP | Web | Wireless

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Stratacom » CISCO-WAN-BBIF-ILMI-MIB » Objects

CISCO-WAN-BBIF-ILMI-MIB.mib object view, vendor Stratacom

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file CISCO-WAN-BBIF-ILMI-MIB and use it to monitor vendor specific OID's.

CISCO-WAN-BBIF-ILMI-MIB file content

Object view of CISCO-WAN-BBIF-ILMI-MIB:

Scalar Object
bbIfCnfSigILMIGrpEntry .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1
An entry for a boradband interface used as a UNI port. Each entry contains ILMI configuration parameters and variables for a broadband interface.
bbIfCntSigILMIGrpEntry .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1
An entry for a boradband interface used as a UNI port.
Tabular Object
bbIfSigPortNum .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1
This object refers to the broadband interface. The value for this object is same as value specified in bbIfNum object from bbIfCnfGrpTable.
bbIfIlmiEnable .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2
The logical interface is a generic entity, it can be used as either a virtual trunk, or user port with UNI support. This variable is provided to enable/disable ILMI. ILMI should only be enabled on 'user ports' and not on 'virtual trunks' 1 - disable 2 - enable
bbIfSignallingProtocolType .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3
This will set the signalling protocol other(1) : other noSignalling(2) : noSignalling iLMI(3) : ILMI
bbIfSignallingVpi .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4
This object specifies the VPI on which signalling cells received.
bbIfSignallingVci .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5
This object specifies the VPI on which signalling cells received.
bbIfAddrPrefix .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6
Network Prefix for the ATM address.
bbIfCustomerId .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7
This represents the customer Id.
bbIfProtocolRevNo .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8
This object represents the protocol revision number.
bbIfIlmiTrapEnable .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9
This object is used for enabling/disabling the sending of ILMI traps.
bbIfMinTrapInterval .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10
This object specifies the minimum throttling period of notification generation. The notificaton events should be suppressed by the agent until the current throttling period expires.
bbIfKeepAlivePollingEnable .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11
Enable/disable Keep Alive Polling.
bbIfErrorThresholdN491 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12
This object specifies Error Threshold (N491) value. The number of keep alive polls that must fail within a window of N491 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
bbIfEventThresholdN492 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13
This object specifies Error Threshold (N492) value. The number of keep alive polls that must fail within a window of N492 polls, before the port is placed in the failed state. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
bbIfPollingIntervalT491 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14
This object specifies Polling Interval (T491) value. The T491 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
bbIfMinEnquiryIntervalT493 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15
This object specifies minimum Enquiry Interval(T493) value. The T493 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
bbIfAddrRegEnable .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16
Enable/disable ILMI Address Registration.
sigCntBbIfNum .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.1
This object refers to the broadband interface. The value for this object is same as value specified in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable.
bbIfSnmpPduReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.2
The number of snmp packets received on this logical interface.
bbIfGetRequestReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.3
The number of get request messages received.
bbIfGetNextRequestReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.4
The number of get-next messages received.
bbIfSetRequestReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.5
The number of set messages received.
bbIfTrapReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.6
The number of traps received.
bbIfGetResponseReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.7
The number of Keep Alive response messages received.
bbIfGetResponseTransmitted .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.8
The number of response messages transmitted.
bbIfGetRequestTransmitted .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.9
The number of Keep Alive get request messages transmitted.
bbIfTrapTransmitted .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.10
The number of trap messages transmitted.
bbIfInvalidPDUReceived .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.11
The number of invalid PDUs received.
bbIfAsn1ParseError .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.12
The number of parse errors on ASN.1.
bbIfNoSuchNameError .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.13
The number of errors for name not present.
bbIfTooBigError .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.14
The number of messages received with len > 484.
bbIfSigCntClrButton .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.15
Writing a value of 2 resets all the counters from bbIfCntSigILMIGrpTable.
Table
bbIfCnfSigILMIGrpTable .1.3.6.1.4.1.351.110.5.2.6.1.2.1
This table contains ILMI configuration parameters for a broadband interface.
bbIfCntSigILMIGrpTable .1.3.6.1.4.1.351.110.5.2.6.4.2.1
This table contains statistics related to ILMI.
Object Identifier
ciscoWanBbifIlmiMIB .1.3.6.1.4.1.351.150.33
The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service module is supported in MGX82xx series products. The broadband interface referred to in this mib is for ATM logical ports.
bbIfCnfSigILMIGrp .1.3.6.1.4.1.351.110.5.2.6.1.2
bbIfCntSigILMIGrp .1.3.6.1.4.1.351.110.5.2.6.4.2
cwbIlmiMIBConformance .1.3.6.1.4.1.351.150.33.2
cwbIlmiMIBGroups .1.3.6.1.4.1.351.150.33.2.1
cwbIlmiMIBCompliances .1.3.6.1.4.1.351.150.33.2.2
Group
cwbIlmiConfGroup .1.3.6.1.4.1.351.150.33.2.1.1
The collection of objects which are used for configuring ILMI on broad band interface ports.
cwbIlmiStatsGroup .1.3.6.1.4.1.351.150.33.2.1.2
The collection of objects containing the ILMI statistics on broad band interface ports.